| .. |
|
example-cartesian.cfg
|
config: Don't use arduino aliases in example-xxx.cfg files
|
2021-03-25 10:49:17 -04:00 |
|
example-corexy.cfg
|
config: Don't use arduino aliases in example-xxx.cfg files
|
2021-03-25 10:49:17 -04:00 |
|
example-corexz.cfg
|
config: Don't use arduino aliases in example-xxx.cfg files
|
2021-03-25 10:49:17 -04:00 |
|
example-delta.cfg
|
config: Don't use arduino aliases in example-xxx.cfg files
|
2021-03-25 10:49:17 -04:00 |
|
example-extras.cfg
|
config: Add dummy example.cfg and example-extras.cfg files
|
2020-11-28 12:09:03 -05:00 |
|
example-hybrid-corexy.cfg
|
kinematics: Add hybrid-corexy and hybrid-corexz (#4229)
|
2021-05-03 14:31:23 -04:00 |
|
example-hybrid-corexz.cfg
|
kinematics: Add hybrid-corexy and hybrid-corexz (#4229)
|
2021-05-03 14:31:23 -04:00 |
|
example-polar.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
example-rotary-delta.cfg
|
config: Don't use arduino aliases in example-xxx.cfg files
|
2021-03-25 10:49:17 -04:00 |
|
example-winch.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
example.cfg
|
config: Add dummy example.cfg and example-extras.cfg files
|
2020-11-28 12:09:03 -05:00 |
|
generic-alligator-r2.cfg
|
dac084S085: SPI DAC DAC084S085 implementation (#5134)
|
2022-02-22 10:28:28 -05:00 |
|
generic-alligator-r3.cfg
|
dac084S085: SPI DAC DAC084S085 implementation (#5134)
|
2022-02-22 10:28:28 -05:00 |
|
generic-archim2.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-azteeg-x5-mini-v3.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
generic-bigtreetech-e3-rrf-v1.1.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-bigtreetech-gtr.cfg
|
config: Remove tmc interpolate setting from example configs
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-octopus.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-2.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-3.cfg
|
config: Note 25Mhz clock in generic-bigtreetech-skr-3.cfg
|
2022-07-19 12:44:18 -04:00 |
|
generic-bigtreetech-skr-cr6-v1.0.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-e3-dip.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-e3-turbo.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-bigtreetech-skr-mini-e3-v1.0.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-mini-e3-v1.2.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-mini-e3-v2.0.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-bigtreetech-skr-mini-e3-v3.0.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-bigtreetech-skr-mini-mz.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-bigtreetech-skr-mini.cfg
|
stm32: Simplify USB/Serial/CANbus Kconfig selection
|
2021-03-18 13:33:33 -04:00 |
|
generic-bigtreetech-skr-pico-v1.0.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-bigtreetech-skr-pro.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-v1.1.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
generic-bigtreetech-skr-v1.3.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-bigtreetech-skr-v1.4.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-cramps.cfg
|
config: Do not use beagleboard aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
generic-creality-v4.2.7.cfg
|
config: Fix missing trailing commas in board_pins config sections
|
2021-08-19 17:10:54 -04:00 |
|
generic-creality-v4.2.10.cfg
|
config: Minor changes to printer-creality-cr30-2021.cfg
|
2021-05-06 11:08:57 -04:00 |
|
generic-duet2-duex.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-duet2-maestro.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-duet2.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-duet3-mini.cfg
|
config: Update generic-duet3-mini.cfg to include Tacho pins (#5551)
|
2022-06-12 13:03:50 -04:00 |
|
generic-einsy-rambo.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-flyboard.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-fysetc-cheetah-v1.1.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-fysetc-cheetah-v1.2.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-fysetc-f6.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-fysetc-s6-v2.cfg
|
config: Pull up endstop_pins on Fysetc S6/Spider
|
2022-04-26 20:53:14 -04:00 |
|
generic-fysetc-s6.cfg
|
config: Pull up endstop_pins on Fysetc S6/Spider
|
2022-04-26 20:53:14 -04:00 |
|
generic-fysetc-spider.cfg
|
config: Pull up endstop_pins on Fysetc S6/Spider
|
2022-04-26 20:53:14 -04:00 |
|
generic-gt2560.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
generic-mellow-fly-cdy-v3.cfg
|
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard (#5508)
|
2022-05-18 12:28:23 -04:00 |
|
generic-mellow-fly-gemini-v1.cfg
|
config:Create configuration file for Fly-Gemini-v1 motherboard (#5474)
|
2022-05-14 10:36:10 -04:00 |
|
generic-mellow-fly-gemini-v2.cfg
|
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard (#5508)
|
2022-05-18 12:28:23 -04:00 |
|
generic-mellow-super-infinty-hv.cfg
|
config: Update generic-mellow-super-infinty-hv.cfg (#4876)
|
2022-01-09 21:44:40 -05:00 |
|
generic-melzi.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
generic-mightyboard.cfg
|
pca9533: RGB support for the mightyboard (#4150)
|
2021-04-09 17:47:16 -04:00 |
|
generic-mini-rambo.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-minitronics1.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
generic-mks-robin-e3.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-mks-robin-nano-v1.cfg
|
stm32: Simplify USB/Serial/CANbus Kconfig selection
|
2021-03-18 13:33:33 -04:00 |
|
generic-mks-robin-nano-v2.cfg
|
config: Fix extruder1 step_pin in Robin Nano V2 example (#4098)
|
2021-03-23 10:52:10 -04:00 |
|
generic-mks-robin-nano-v3.cfg
|
config: fan pin number correction for Robin Nano 3 (#4005)
|
2021-02-28 16:17:21 -05:00 |
|
generic-mks-rumba32-v1.0.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-mks-sgenl.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-printrboard-g2.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-printrboard.cfg
|
config: Update generic-printrboard.cfg to mention different Y endstop pin on RevF hardware (#4732)
|
2021-10-15 11:56:16 -04:00 |
|
generic-prusa-buddy.cfg
|
config: Rename generic-buddy.cfg to generic-prusa-buddy.cfg
|
2021-06-14 12:40:36 -04:00 |
|
generic-radds.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-rambo.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
generic-ramps.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
generic-re-arm.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
generic-replicape.cfg
|
config: Fix missing trailing commas in board_pins config sections
|
2021-08-19 17:10:54 -04:00 |
|
generic-rumba.cfg
|
temperature_sensors: Deprecate "NTC 100K beta 3950" thermistor
|
2021-11-10 18:56:51 -05:00 |
|
generic-ruramps-v1.3.cfg
|
config: Add generic-ruramps-v1.3.cfg to test cases and minor updates
|
2021-05-12 10:25:41 -04:00 |
|
generic-simulavr.cfg
|
config: Don't use sanguino aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
generic-smoothieboard.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
generic-th3d-ezboard-lite-v1.2.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
generic-th3d-ezboard-lite-v2.0.cfg
|
config: fix processor name in th3d ezboard lite v2.0 config
|
2022-06-16 10:48:28 -04:00 |
|
generic-ultimaker-ultimainboard-v2.cfg
|
config: Change current scale on generic-ultimaker-ultimainboard-v2.cfg
|
2021-05-28 18:56:33 -04:00 |
|
kit-voron2-250mm.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
kit-zav3d-2019.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-adimlab-2018.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-alfawise-u30-2018.cfg
|
stm32: Simplify USB/Serial/CANbus Kconfig selection
|
2021-03-18 13:33:33 -04:00 |
|
printer-anet-a4-2018.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-anet-a8-2017.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-anet-e10-2018.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-anet-e16-2019.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-anycubic-4max-2018.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-anycubic-4maxpro-2.0-2021.cfg
|
config: Anycubic 4 Max Pro 2.0 - Added two internal systems (beeper and PSU control). (#5629)
|
2022-08-19 13:11:42 -04:00 |
|
printer-anycubic-i3-mega-2017.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-anycubic-kossel-2016.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-anycubic-kossel-plus-2017.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-anycubic-vyper-2021.cfg
|
config: Anycubic Vyper (#4740)
|
2021-10-11 16:26:14 -04:00 |
|
printer-biqu-b1-se-plus-2022.cfg
|
test: Add printer-biqu-b1-se-plus-2022.cfg to printers.test
|
2022-06-29 18:10:47 -04:00 |
|
printer-biqu-bx-2021.cfg
|
config: Add BIQU BX printer config (#4950)
|
2022-01-29 13:31:41 -05:00 |
|
printer-bq-hephestos-2014.cfg
|
config: Add BQ Hephestos printer (#5676)
|
2022-08-19 13:57:18 -04:00 |
|
printer-creality-cr6se-2020.cfg
|
stm32: Simplify USB/Serial/CANbus Kconfig selection
|
2021-03-18 13:33:33 -04:00 |
|
printer-creality-cr6se-2021.cfg
|
config: Correct Pin for the CR-6 SE 2021 Example Config (#5142)
|
2022-01-16 14:22:44 -05:00 |
|
printer-creality-cr10-2017.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-creality-cr10-smart-pro-2022.cfg
|
config: Add config for CR-10 Smart Pro, including installation instructions (#5396)
|
2022-04-07 11:59:04 -04:00 |
|
printer-creality-cr10-v3-2020.cfg
|
config: Fix screw typo in printer-creality-cr10-v3-2020.cfg
|
2022-07-19 13:46:50 -04:00 |
|
printer-creality-cr10mini-2017.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-creality-cr10s-2017.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-creality-cr20-2018.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-creality-cr20-pro-2019.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-creality-cr30-2021.cfg
|
config: Minor changes to printer-creality-cr30-2021.cfg
|
2021-05-06 11:08:57 -04:00 |
|
printer-creality-ender2-2017.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-creality-ender2pro-2021.cfg
|
config: Adds Ender 2 Pro config (#5359)
|
2022-03-17 20:43:55 -04:00 |
|
printer-creality-ender3-2018.cfg
|
config: Adding bed_screws to Ender 3 (#5252)
|
2022-03-14 13:38:05 -04:00 |
|
printer-creality-ender3-s1-2021.cfg
|
config: Use printer-creality-ender3-s1-2021.cfg for both s1 and s1 pro.
|
2022-07-24 08:49:25 -04:00 |
|
printer-creality-ender3-v2-2020.cfg
|
stm32: Simplify USB/Serial/CANbus Kconfig selection
|
2021-03-18 13:33:33 -04:00 |
|
printer-creality-ender3max-2021.cfg
|
config: Remove URLs to github repository
|
2021-09-23 19:45:22 -04:00 |
|
printer-creality-ender3pro-2020.cfg
|
printer-creality-ender3pro-2020: Update info on chip types (#5445)
|
2022-04-23 21:25:07 -04:00 |
|
printer-creality-ender5-2019.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-creality-ender5plus-2019.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-creality-ender5pro-2020.cfg
|
config: Added Config for Creality Ender 5 Pro 2020 (#4836)
|
2022-03-18 20:42:15 -04:00 |
|
printer-creality-ender6-2020.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-creality-sermoonD1-2021.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-creality-sermoonV1-2022.cfg
|
config: Fix wording of serial port selection on recent creality configs
|
2022-07-21 21:56:46 -04:00 |
|
printer-elegoo-neptune2-2021.cfg
|
config: Elegoo Neptune 2 config update (#5213)
|
2022-03-14 12:50:38 -04:00 |
|
printer-eryone-er20-2021.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-eryone-thinker-series-v2-2020.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-flashforge-creator-pro-2018.cfg
|
config: Add printer-flashforge-creator-pro-2018.cfg to test cases
|
2021-04-16 13:58:24 -04:00 |
|
printer-flsun-q5-2020.cfg
|
config: Update printer-flsun-q5-2020.cfg (#4488)
|
2021-07-20 11:01:26 -04:00 |
|
printer-flsun-qqs-2020.cfg
|
config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237)
|
2021-06-27 18:27:39 -04:00 |
|
printer-fokoos-odin5-f3-2021.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-hiprecy-leo-2019.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-longer-lk4-pro-2019.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-lulzbot-mini1-2016.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-lulzbot-taz6-2017.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-lulzbot-taz6-dual-v3-2017.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-makergear-m2-2012.cfg
|
endstop_phase: Obtain phases directly from stepper microsteps config
|
2020-12-18 10:30:32 -05:00 |
|
printer-makergear-m2-2016.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-micromake-d1-2016.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-modix-big60-2020.cfg
|
config: Add configuration for Modix Big60 printer (#4986)
|
2021-12-15 14:06:29 -05:00 |
|
printer-monoprice-mini-delta-2017.cfg
|
stm32: Simplify USB/Serial/CANbus Kconfig selection
|
2021-03-18 13:33:33 -04:00 |
|
printer-monoprice-select-mini-v1-2016.cfg
|
config: Config for Monoprice Select Mini v1 (#5243)
|
2022-03-14 14:17:32 -04:00 |
|
printer-monoprice-select-mini-v2-2018.cfg
|
config: Fix incorrect pin in printer-monoprice-select-mini-v2-2018.cfg
|
2022-04-23 21:16:09 -04:00 |
|
printer-mtw-create-2015.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-prusa-mini-plus-2020.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-robo3d-r2-2017.cfg
|
config: Update printer-robo3d-r2-2017.cfg
|
2021-03-27 12:55:17 -04:00 |
|
printer-seemecnc-rostock-max-v2-2015.cfg
|
config: Change of alias for heater_fan in multiple configs (#5632)
|
2022-07-19 13:02:51 -04:00 |
|
printer-sovol-sv01-2020.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-sunlu-s8-2020.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-tevo-flash-2018.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-tevo-tarantula-pro-2020.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-tronxy-p802e-2020.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-tronxy-p802m-2020.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-tronxy-x5s-2018.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-tronxy-x5sa-pro-2020.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-tronxy-x5sa-v6-2019.cfg
|
config: Update printer-tronxy-x5sa-v6-2019.cfg (#5262)
|
2022-02-14 19:17:38 -05:00 |
|
printer-tronxy-x8-2018.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-tronxy-xy-2-Pro-2020.cfg
|
config: Minor updates to printer-tronxy-xy-2-Pro-2020.cfg
|
2021-10-26 16:11:13 -04:00 |
|
printer-twotrees-sapphire-plus-sp-5-v1-2020.cfg
|
config: Updated and created new TwoTrees configs to avoid confusion (#5365)
|
2022-04-13 11:07:13 -04:00 |
|
printer-twotrees-sapphire-plus-sp-5-v1.1-2021.cfg
|
config: Updated and created new TwoTrees configs to avoid confusion (#5365)
|
2022-04-13 11:07:13 -04:00 |
|
printer-twotrees-sapphire-pro-sp-3-2020.cfg
|
config: Updated and created new TwoTrees configs to avoid confusion (#5365)
|
2022-04-13 11:07:13 -04:00 |
|
printer-velleman-k8200-2013.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-velleman-k8800-2017.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-wanhao-duplicator-6-2016.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-wanhao-duplicator-9-2018.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-wanhao-duplicator-i3-mini-2017.cfg
|
config: Don't use arduino mega aliases in example config files
|
2021-03-25 10:49:17 -04:00 |
|
printer-wanhao-duplicator-i3-plus-2017.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
printer-wanhao-duplicator-i3-v2.1-2017.cfg
|
config: Update printer-wanhao-duplicator-i3-v2.1-2017.cfg (#5261)
|
2022-02-14 19:16:40 -05:00 |
|
sample-aliases.cfg
|
avr: Rename the analog-only PE0/PE1 pins on atmega168/328 to PE2/PE3
|
2021-08-14 22:00:17 -04:00 |
|
sample-bigtreetech-ebb-canbus-v1.0.cfg
|
config: Add BTT SKR 3 & EBB CAN V1.0 & V1.1 board cfg (#5529)
|
2022-06-01 11:28:10 -04:00 |
|
sample-bigtreetech-ebb-canbus-v1.1.cfg
|
config: Add BTT SKR 3 & EBB CAN V1.0 & V1.1 board cfg (#5529)
|
2022-06-01 11:28:10 -04:00 |
|
sample-bigtreetech-exp-mot.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
sample-bigtreetech-hermit-crab-canbus.cfg
|
config: Remove hold_current from sample configs and sample macros
|
2021-12-12 12:44:06 -05:00 |
|
sample-dgus-display.cfg
|
config: Add sample DGUS display configuration
|
2021-09-10 01:08:29 +02:00 |
|
sample-glyphs.cfg
|
docs: Move config reference information to new Config_Reference.md
|
2020-11-18 20:10:21 -05:00 |
|
sample-huvud-v0.61.cfg
|
config: Rename sample-huvud-v0.61.cfg
|
2022-06-03 11:43:34 -04:00 |
|
sample-idex.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
sample-lcd.cfg
|
config: Added Anet alt-wiring display example (#5605)
|
2022-07-06 15:56:02 -04:00 |
|
sample-macros.cfg
|
docs: fix rawparams example by truncating comments
|
2022-07-19 12:48:16 -04:00 |
|
sample-mmu2s-diy.cfg
|
config: Remove tmc interpolate setting from example configs
|
2021-12-12 12:44:06 -05:00 |
|
sample-multi-extruder.cfg
|
config: Update example configs to use rotation_distance
|
2020-12-18 10:38:49 -05:00 |
|
sample-multi-mcu.cfg
|
config: Don't use arduino aliases in example-xxx.cfg files
|
2021-03-25 10:49:17 -04:00 |
|
sample-probe-as-z-endstop.cfg
|
docs: Docs comma culture (#4822)
|
2022-01-09 21:13:53 -05:00 |
|
sample-pwm-tool.cfg
|
config: Don't use deprecated features in sample-pwm-tool.cfg
|
2021-10-24 21:42:48 -04:00 |
|
sample-raspberry-pi.cfg
|
docs: Prefer Jinja2 "set" directive to default_parameter_xxx in examples
|
2021-04-26 12:44:51 -04:00 |
