We now use `fix_positions` to avoid cropping the emoji
picker. You can see cropping pretty easily on a short
screen if you click the smiley icon for reactions on a
message. It's a bit tricky to repro, since some
of the current top/bottom placements are correct, but
it's definitely reproducible.
I think there are opportunities to both simplify
and optimize `popovers.compute_placement`, so that it
plays nicer with `fix_positions`. For example, I would
bias it even more strongly toward favoring right/left
placement. But there are complicating factors--it is
also used by the hotspot code.
And I wanted to especially preserve the current
behavior when you launch the picker from the compose
box. That's one place where it looks pretty bad if
you select "right" instead of "bottom".
The fix_positions argument here fixes the horizontal
position of the stream popover.
It also fixes the vertical position, both in the default case, and
also doing an appropriate adjustment for the case that the color
picker is open.
This contains a few changes by tabbott to, rather than hiding the
arrow unconditionally, only do so when it would no longer point at the
right part of the screen.
Fixes#2374.
Fixes#6059.
Fixes#7290.
We use the `fix_positions` options every time
we launch a user popover, whether it is from
the message pane avatar or the buddy list
chevron.
For the message pane case, we can eliminate
some complexity related to trying to put
the menu above or below the avatar. We now
always suggest "right", and if there are
constraints due to being close to the edge
of the screen, the fix_positions code
will take care of it.
The patch to bootstrap will make the position smarter, but we still
want to preserve the 100px default vertical offset we chose for visual
reasons.
Tweaked by tabbott to preserve the visual design.
Changed <h5> to <p>, and removed the special formatting of
.empty_search_text to make this more in line with the formatting we
generally use with empty narrows.
This removes the left border extending the stream label from the
recipient bar in from the drafts in drafts modal. Those borders are
important in the message feed for containing several messages, but
here we're only ever going to show individual drafts, and this change
avoids potential color clashes with the blue box surrounding the
recipient blocks.
This removes the change in background to a darker one for active draft,
also removes the change in recipient_row_date color to blue; adds a blue
border around the draft box.
Since the bootstrap popovers are destroyed asynchronously so opening a
emoji popover in quick succession like by clicking the reaction button
on another message was causing a race condition which was causing some
operations to be applied on a destroyed emoji popover. This commit
fixes it by making sure to apply any operations only to the currently
active popover.
Fixes: #9851.
I'm torn about this, since there is good content here. But ultimately I think
* This page is a lot of work to write and maintain.
* In most cases, the right thing is for people to find the page that
explains the full feature. E.g. if you don't know what an "administrator"
is, the page I hope you find is "Roles and Permissions". For bots, it's
"Bots and Integrations". Writing a punchy short summary for a glossary
that does better than that is possible, but not fast.
* People find things via search, e.g. by Googling "What is X in Zulip",
rather than looking for a glossary.
* This page was written more than 3 years ago, before we had 100+ help
articles. So it may have served a purpose in the past that no longer
exists.
Adds three helper functions - `row_with_focus`, `row_before_focus` and
`row_after_focus` to get the focused, previous and next to focused
draft rows respectively.
`delete_id` in `drafts.js` referred to the next draft row which was
to be focused when deleting using hot keys. The var name was absurd
and is hence renamed.
Adds a `remove_draft` function which deletes the draft and updates the ui
by removing it from the list of drafts.
Also adds comments to increase readability.
Show "sent to different narrow" notification and other such notification by
notifications.notify_local_mixes for non locally echoed message sent by
current client.
With significant new comments added by tabbott.
Fixes: #11488.
Previously, this was only available in the Zulip development
environment.
Further work is needed on documenting this and how to use it for
managing work to follow up on.
The width of the messages div is set to 600px, while the
digest-email-container can be 500px at the most. Increasing the width
of the digest-email-container makes the /digest slightly more
readable.
The padding changes move the number a bit to the right and down, towards
where the bottom right corner of an unread count box would have been. This
makes the number look better aligned with the unread count boxes above it.
We swallow the error if our python_to_js_filter code is
unable to parse some python regex properly. This ensures
that the web app stays responsive.
We would fail to show an accurate local echo for these
regexes, however, the backend would act as the final
authority for handling the realm pattern conversion.
Since on replacing the first 'P<>' group, we remove this text from
the string, we have to make the RegExp start looking from index 0
again to properly convert later 'P<>' groups to JS regex syntax.
We want the search widget, when visible, to be
outside the scroll container for the stream list.
One obvious use case is if you start scrolling, and
then realize it might be less effort to search.
Also, for user search, it already worked this way.
We have to add a couple resizing hooks here, but
it's not necessary to change the actual resize
calculation, since we move the section inside
of #streams_header, which is already accounted
for.
The only markup change here is to add
a `stream_search_section` class. I don't
know why we use `notdisplayed` here instead of
jQuery, or what `input-append` is for, but I
considered them outside the scope of this change.
We can also remove some crufty CSS that was
compensating for it being inside the container.
First, we are not removing Group PMs from the
right sidebar, where most people see it.
There is a setting called:
[ ] User list in left sidebar in narrow windows
There are probably very few people that turn that on,
and even when they do, the setting only takes effect
when your window is less than a certain width.
This feature bitrots very quickly, because very few
core maintainers use it.
It's already kind of broken. It gets very crowded,
and we get CSS bugs when we move the right sidebar
into the left sidebar. (We can fix those bugs, but
they crop up unexpectedly due to the nature of CSS.)
We historically tried to maintain a ratio between
stream list, single-user buddy list, and group-user
buddy list, but the group-user buddy list gets
particularly crowded out, and it's basically useless
now.
We want to revisit the entire feature eventually, but
this commit at least gives the normal buddy list some
breathing room.
Also, if you need to see the info in the group PM
list, you can basically expand "Private Messages" to
see your recent group PM conversations. And if you
want to see who's actually online, that info is
already implicit from the normal buddy list.
If users have the option to put user lists in
the left sidebar for narrow windows, they will
now get 15px more of real estate in the left
sidebar.
I just removed the `-15` fudge factor.
We were double-counting the keyboard icon's
margin (8px) when figuring out how much room
we had for the two users lists.
Now we just use the safe outer height of
the anchor tag.
This change only impacts users who have the setting
to put the user lists in the left sidebar when they
have a narrow window.
First, we move ".right-sidebar-items" as an entire
group.
Second, we append the items to "#left-sidebar"
instead of ".narrows_panel".
The name `bottom_sidebar` was misleading, because it
includes the entire "normal" left sidebar.
It includes the 4 narrow links at the top plus the
stream/topic list.
We now call is narrows_panel.
Note that the left sidebar sometimes also includes
the user list (with a display setting turned on).
And it will eventually include other views.
We also remove an intermediate value in the resize
calculations.
This adds date dividers within a single message group when the only
reason we had previously been splitting apart two message groups is a
change of date. The overall effect is a cleaner message list user
experience.
The downside of this change would be that the recipient bars no longer
will always show a new date for date changes; to fix that, we rewrite
how the floating recipient bars both set the date field on the
floating recipient bar itself, as well as ensure that non-floating
recipient bars don't show duplicate dates.
In a future design update where we modify how message recipient bars
look, we may very well be able to simplify this logic by removing some
of the dynamic nature of the recipient bar calculations. But this is
a good implementation of what remains.
Tweaked significantly by tabbott from Steve Howell's original, both to
extract these changes from a larger PR as well as to modify the
first_visible_message logic to handle some tricky corner cases.
Fixes#10171.
On clicking the edit button for a stream description, the stream's
unrendered description should be made editable as text instead of
the stream's rendered description (which would be displayed as HTML
instead of text).
This completes the effort to use backend-rendered stream descriptions
here. Fixes#11272.
Use the results of commit #73d26c8 to remove the method
`render_stream_description` in static/js/stream_data.js and instead
use the rendered_description attribute now being sent by the backend.
This will be a valuable optimization and a step towards removing the
need for the marked.js markdown parser and speeding up the client end.
This changes the border-radius to 6px for the tabbed display, which is not
in line with the current Zulip style for border-radius (4px). However 6px
really looks a lot better for this (possibly because it's a bigger box than
most of our other boxes?)
The message_edit_history UI was incorrectly inheriting its content
div's structure from message_edit_content, i.e. the form for editing
message content, and not message_content, i.e. the class for rendering
the content of messages in the message feed (which we also use for
drafts).
Fix this by changing the inheritance, while also adding a (currently
unused) class for any future customizations.
Fixes: #5629.
This extract functions `get_mention_candidates_data` &
`filter_mention_name` to make code reusable and cleaner and further use
the logic in silent mention syntax.
Having a tiny bit of margin below the stream list
makes it possible to see the bottom of the scrollbar.
It also makes it so that the scrollbar activates
for a tiny range of list sizes where before the
last element would have been right up against the
bottom of the page, but we wouldn't scroll.
We need to move the update_group_date_divider call to run when a
message group is created. This achieves a few things:
* Fixes calling this multiple times useless for long message groups.
* It will soon no longer be correct to assume that every message
within a group has the same date, and in that case, we want to process
the date of the first message in the group, not of the last.
We only generate message_containers in one place, and that code path
already calls update_timestr. And update_timestr's effect only
depends on the message. Thus, this code was useless.
In small screen sizes, when the user presses shortcut `w` to search
for another user, the hide_all function calls in the search code path
would hide the right sidebar, immediately after opening it, making the
hotkey basically unusable.
We fix this by extracting a separate hide method that hides all true
popovers, but not the user list sidebar.
Fixes#11463.
The `uploadFinished` code switches on the composing mode, if we aren't
in the composing mode already. This causes the focus to be incorrect
when this code path runs due to an upload from the message edit
box. This commit fixes that logic to turn on the composing mode or
switches focus to the message edit box, depending on where the upload
was triggered.
So the top navbar is above the left sidebar
on the z-axis, not the y-axis.
So it doesn't make sense to use the top
navbar in calculating the size of the left
sidebar.
It kind of coincidentally works, since these
two numbers are closely related:
left sidebar top margin = 50
navbar height = 40
Calculating `bottom_sidebar_height` correctly
decreases its value by 10.
And then the only value that depends on it
is `stream_filters_max_height`. We were
subtracting out 10 there to make it work,
since `bottom_sidebar_height` was inaccurate
by +10. Now that's fixed.
The comment there was inaccurate--the
`stream_filter` div actually has a bottom
margin of 22px. The bottom margin does
have some consequences for scrolling,
but the main goal here is to make the
calculation return the same value but
be more accurate about what happens
toward the top of the screen.
We have always intended to have 10px of whitespace
below the navbar, and this enforces it directly
and explicitly in the CSS.
Note that the three major panels still should
have a margin of 50px, which is equal to
the safe outer height of the header (40px + 10px).
The border makes the alignment look nicer. Without
a border your eyes plays tricks on you and makes it
seem like numbers are not in the same column.
The border color is the same subtle color as the
backgrounds in others.
Because CSS is annoying, you have to tweak the padding
to make room for the border.
(It should look ok in night mode, too.)
Since the main autoscroll feature was implemeneted, the
maybe_advance_to_recently_sent_message logic had an unfortunate
structure, where the code for this potentially large scroll was
running AFTER the autoscroll decision was made, but before an actual
scroll could have occurred.
This resulted in code that was very difficult to reason about, as
there were 2 potential sources of scrolling when you send a new
message, with little connection between their implementations either
in location or implementation.
Moving this into the main autoscrolling code path clarifies the code,
with the added benefit of fixing a bug where we would report to the
user that they needed to scroll down when in fact we were just about
to scroll the bottom of the feed into view (via
maybe_advance_to_recently_sent_message).
With this change, we never display the "you need to scroll manually"
message in the cast that we just scrolled you there via selecting a
message.
When you just sent a large message, our logic for "you need to scroll"
notifications did not correctly take into account the height of the
compose box. This was easily reproduced when sending very long
messages. The correct solution requires a bit of math to compute what
the visible area will look like after the compose box is closed.
This should be the final fix to #11138.
This adds a function that controls the whole process of applying
markdown and displaying the markdown rendering preview on request;
This is required to avoid code duplication when adding preview feature
to message-edit UI.
We had disabled reference style links in bugdown, however,
we hadn't disabled them in marked. This commit rectifies
that and adds test cases for the same.
Fixes#11350.
The beforeSubmit function was a feature of the jquery-form plugin that
we removed months ago; the appropriate similar feature of jQuery's
built-in AJAX library is beforeSend.
This code will correctly add video call link to the message
textarea based on whether 'Add video call' was selected from
message composition form or message edit form.
The implementation was semi-rewritten by tabbott to remove an
unnecessary global variable, with fixes for the unit tests from
showell.
Fixes#11188.
This is primarily a feature for onboarding, where an organization
administrator might send a bunch of random test messages as part of
joining, but then want a pristine organization when their users later
join.
But it can theoretically be used for other use cases (e.g. for
moderation or removing threads that are problematic in some way).
Tweaked by tabbott to handle corner cases with
is_history_public_to_subscribers.
Fixes#10912.
This replaces the current usage of stream names with stream ids.
This commit also removes the `traditional` attribute from the invite
form as now we are sending stream_ids as an argument; this was the
only place in the codebase we used traditional=true, and it's great to
have it removed.
This function unlike `invite_streams()` returns an array of objects having
various info (name, stream_id, invite_only, default_stream) related to
streams rather than an array of names of streams.
We now compute the class that drives the tiny
green/orange/empty dot in the user popover using
the same logic as the buddy list.
This was broken in the early implementation of
set/clear-away, but it was never released.
Fixes#11413
This makes it possible to mention a user with a name like Gaël that
contains diacritics by typing e.g. "Gael", significantly reducing the
need to use a special keyboard to mention other users.
Fixes#11183.
The only time we set the `home` flag to true
is when it's the last (and only) item in the
list, in which case we flip `hash` to false
at the end of `make_tab_data()`.
So the section of code where both `home` and
`flag` were true is dead code.
Also, we can use `else` instead of `unless`.
The following elements in the top left corner
are major components of our app:
All messages
Private messages
Starred messages
Mentions
We can now find them directly:
$('.top_left_all_messages')
$('.top_left_private_messages')
$('.top_left_starred_messages')
$('.top_left_mentions')
Before this, we had to build up complicated selectors
like below:
exports.get_global_filter_li = function (filter_name) {
var selector = "#global_filters li[data-name='"
+ filter_name + "']";
return $(selector);
};
I don't think any newbie would know to grep for "global_filter",
and I've seen a PR where somebody added specific markup here
to "Private messages" because they couldn't grok the old scheme.
Another thing to note is that we still have a "home-link"
class for "All messages", which overlapped with portico
code that had the same name. (There were some inaccurate
comments in the code relating to the tab bar, but we don't
actually have a way to click to the home view in the tab
bar any more.) I'll eliminate that cruft in another commit.
For this commit the four elements still have the
"global-filter" class, since there's some benefit to being
able to style them all as a group, although we should give
it a nicer name in a subsequent commit.
Most of this PR is basic search/replace, but I did add a
two-line helper: `top_left_corner.update_starred_count`
We had initially designed the poll widget like a blog
post with comments beneath it but it makes more sense
to think of it as just a simple poll with options.
We add a new syntax which converts the messages like the following:
```
/poll Who do you support?
Nadal
- Djokovic
```
to a poll with the two names as options. The list syntax is optional
since anyone making a poll is likely to want to create a list anyway.
When you hover over a user that has set a user
status, we now show something like "out to lunch."
You can test this in the console by doing:
user_status.server_update({status_text: 'out to lunch'})
And then hover over your name in the buddy list.
The name `insert_user_into_list` is sort of misleading,
since we are often just redrawing the user's existing
item in the buddy list.
I chose `redraw_user` over `update_user` to emphasize
that we're just going to redraw it with whatever data
has been updated by the callers.
This fixes an annoying bug where clicking to subscribe to a stream
would change the color shown in the "manage streams" UI immediately
after you click.
Fixes#11072.
This adds a setting under "Notification" section of
"Organization settings" tab, which enables Organization administrator to
control whether the missed message emails include the message content or
not.
Fixes: #11123.
The commit f863a9b567 had modified
jquery.filedrop's paste method to exit early if any of the items in the
clipboardData is of the string kind. The early exit was added to prevent pasting
an image thumbnail for text copied from software like MS Word, instead of
pasting the actual copied text content. When copying an image in a (modern?)
Browser, though, the clipboard seems to contain a html `img` tag item, along
with the actual image file. This resulted in pastes being broken.
This commit modifies the condition checked for the early exit. We now actually
look at the html content in the clipboard to see if it is an `img` tag, in which
case we upload the image, instead of exiting early.
Closes#7130.
This is likely not the "right" fix in that it involved a negative
margin, but this does eliminate an annoying visual glitch where the
scrollbar overflows above its container in the left sidebar, without
creating other apparent problems.
Fixes#8731.
User was able to click delete button multiple time which could cause
multiple delete requests. This commit disables and hides the delete
message button after the first click and shows a spinner until http
the delete request responds.
Also adds a casperjs test to ensure that spinner becomes visible and
delete button becomes invisible after clicking on delete button for
first time and hides spinner and show delete buttton when message is
deleted.
Fixes: #11219.
This fixes a section of code that hasn't really
been turned on yet. We decided to rename
"info" to "status_text", and I apparently missed
this. We don't have any UI to set these yet,
so it was a harmless bug.
I'll try to get some better test coverage on this
when I tweak the buddy list to show user status.
This commit takes away the ability for non-admin members to create
streams where only admins can post messages by hiding the option from
them.
Fixes#11290.
You can now pass in an info field with a value
like "out to lunch" to the /users/me/status,
and the server will include that in its outbound
events.
The semantics here are that both "away" and
"status_text" have to have defined values in order
to cause changes. You can omit the keys or
pass in None when values don't change.
The way you clear info is to pass the empty
string.
We also change page_params to have a dictionary
called "user_status" instead of a set of user
ids. This requires a few small changes on the
frontend. (We will add "status_text" support in
subsequent commits; the changes here just keep
the "away" feature working correctly.)
We had a bug where if you started typing a message
and then used quote/reply (after the fact), we
would overwrite the user's original message.
The bug was kind of subtle--the internal call
to "respond" to the message would select the message
text, and then `smart_insert` would replace the
selection, unless it was Firefox.
Note that we now also allow you to cross-post
replies, which is a plausible scenario, although
possibly unintentional at times, too. I'm erring
on the side of giving the user control here, but
I'll add a warning in the next commit. Our compose
fade feature should also prevent unintentional
mixes here, too.
We often need to go to the server to get raw content.
The exceptions are messages for which we've already
fetched the raw content for some other reason (maybe
a previous quote-and-reply) or which are locally echoed.
Whether we can get the raw content locally or from
the server, the replace_content() logic is the same.
NOTE: If you revert this commit, you want to revert
the immediately prior commit as well. The history
is that Ishan made some improvements to the widget,
but there were some minor bugs. I decided not
to squash the commits together so that the git
history is clear who did what. (In particular, I
want questions about the JS code to come to me if
somebody does `git blame`.)
Anyway...
This is a fairly significant rewrite of the polling
widget, where I clean up the overall structure of
the code (including things from before the prior
fix) and try to polish the prior commit a bit as
well.
There are a few new features:
* We tell "other" users to wait for the poll
to start (if there's no question yet).
* We tip the author to say "/poll foo" (as
needed).
* We add edit controls for the question.
* We don't allow new choices until there's
a question.
This also fixes few unusual UI issues like an invitation got failed when
certain emails can't be invited then the error box is left with "warning"
even when next request got succeed and another case when invitation got
succeed after failing it's still reported with "alert-error" class alert
banner.
It's no longer used, as can be seen in
2d52463b61, in past we use `type` for
specifiying whether status is 'subscriptions-status' or else, which isn't
used now, hence `type` is removed here.
This reverts the temporary fix done in commit
46f4e58782 and replaced it with the fix that
non-admins should be able to see a dropdown to select a non-admin type of
invited user i.e. normal member or guest user.
This commit fixes a bug that caused:
1: A valid full name on an onboarding form to be cleared after an
invalid submission.
2: Incorrectly cleared name populated from LDAP which was janky from
UX perspective.
Ideally we should disable name change for LDAP as next login
will overwrite any changes but I think that can be done in a
separate PR.
Fixes: #10867.
On the backend, we extend the BlockQuoteProcessor's clean function that
just removes '>' from the start of each line to convert each mention to
have the silent mention syntax, before UserMentionPattern is invoked.
The frontend, however, has an edge case where if you are mentioned in
some message and you quote it while having mentioned yourself above
the quoted message, you wouldn't see the red highlight till we get the
final rendered message from the backend.
This is such a subtle glitch that it's likely not worth worrying about.
Fixes#8025.
These mentions look like regular mentions except they do not
trigger any notification for the person mentioned. These are
primarily to be used when you make a bot take an action and
the bot mentions you, or when you quote a message that mentions
you.
Fixes#11221.
Users can preview their profile from user settings. If user
open preview profile modal from user settings, then closing
preview profile modal should redirect them to settings modal
again (since probably they want to keep editing).
This commit fixes above issue.
This adds the same style of "Saving"/"Saved" loading spinners we use
elsewhere in our settings.
Tweaked significantly by tabbott to fix issues with the notifications
being on the wrong screen for reactiving/deactivating users; this was
done by introducing the get_status_field helper function and using it
everywhere.
The legacy "Updated Successfully" message shown after saving changes,
is removed, and replaced with our standard "Saving" spinner and
animation.
Fixes: #11177.
This code will correctly render emoji to the message textarea based on
whether emoji was selected from message composition form or message
edit form.
Fixes part of #11188.
AFAIK I should this never fail, hence the blueslip.error line. But it
is failing in practice when rendering user groups after looking them
up by ID, and the error handling should definitely be softer.
Our recent work on inviting users as guests accidentally set the
invite_as argument in a way that would fail for non-admin users.
Fixes#11283, fixes#11255.
We do this because now we send a message to stream if a reminder
is set and won't need the notification above the compose box saying
that we set a reminder. We would still need that notifications for
the send later feature so we make the construct conditional.
In between releases, the following commit introduced
a bug where we agressively scroll to the top every
place we call `ui.update_scrollbar`:
092b73d0b7
The main symptoms were that the left and right sidebars
would go to the top for things like selecting a topic,
getting activity updates from the server, and resizing
the window. It was very jarring.
The recent commit looked innocuous--the root of the problem
was the original API expressed an intent to scroll to the
top, but didn't actually do it, so it was a bug in hiding.
There are **some** occasions where it's actually appropriate
to scroll to the top, mostly around search filtering, and
in those places we now call the new `ui.reset_scrollbar`
function.
This is a bit of an emergency fix, so particularly with
the settings stuff, we may get more reports of glitches here.
The important thing here is that you almost never want to
reset the scrollTop for sidebars.
This seems like a small change (apart from all the
test changes), but it fundamentally changes how
the app finds "topic" on message objects. Now
all code that used to set "subject" now sets "topic"
on message-like objects. We convert incoming messages
to have topic, and we write to "topic" all the way up
to hitting the server (which now accepts "topic" on
incoming endpoints).
We fall back to subject as needed, but the code will
emit a warning that should be heeded--the "subject"
field is prone to becoming stale for things like
topic changes.
We recently added a feature to warn users that they
may need to scroll down to view messages that they
just sent, but it was broken due to various complexities
in the rendering code path.
Now we compute it a bit more rigorously.
It requires us to pass some info about rendering up
and down the stack, which is why it's kind of a long
commit, but the bulk of the logic is in these JS files:
* message_list_view.js
* notifications.js
I choose to pass structs around instead of booleans,
because I anticipate we may eventually add more metadata
about rendering to it, plus bools are just kinda brittle.
(The exceptions are that `_maybe_autoscroll`, which
is at the bottom of the stack, just passes back a simple
boolean, and `notify_local_mixes`, also at the bottom
of the stack, just accepts a simple boolean.)
This errs on the side of warning the user, even if the
new message is partially visible.
Fixes#11138
We now have two functions:
add_new_messages
add_old_messages
This is a lot easier on the eyes, and it will also
prevent us from exceeding line length in future commits.
We also remove an unneeded stub in the narrow_activate
tests.
This commit makes it a bit more explicit about
why we're updating 2 or 3 message lists every time.
It looks funny now to repeat the home-list updates
in both sides of the conditional, but this will be
more obvious in a subsequent commit, where we want
to capture return values from rendering.
In a recent commit we allowed for `scroll_amount`
to be zero (as an indirect consequence of letting
`scroll_limit` be zero without early exiting).
See 0f75be3e8e
We want to short circuit the call to
`system_initiated_animate_scroll`, partly to save
unnecessary computation, but in particular to avoid
invoking the suppress-pointer-update logic.
It's convenient to have visible_bottom as well
as top/height, and the extra computation is
trivial (it's just arithmetic, no extra jQuery
involved).
There's some minor cleanup here too.
This adds a proper template for the /digest page, making it a
reasonable way to view the digest email content for development and
debugging.
Fixes: #11016.
Guest users can not add subscribers to subscribed or unsubscribed
streams. Therefore hide add-subs html element if current user
is guest user.
Tweaked by tabbott to use the early-return pattern.
Add explanation in popover on disabled add-subscriptions input elements,
admin can't add subscribers to non subscribed private streams, only
subscribed users can.
Fixes#10593
There's a subtle change here in how we handle the
hypothetical case that the selected message is above
the top of the feed. Instead of early-exiting
from _maybe_autoscroll(), we just treat the limit
as zero, which will have the same effect.
We also change a var name be just `scroll_limit`
instead of `available_space_for_scroll`. A longer
name would be valuable if it were somehow more
specific, but it was needlessly verbose.
The idea is to use this field for storing the best matching alias
to be displayed in search results. In subsequent commits I will
replace the search and rendering logic to use this field instead
of creating new objects on each search.
Since we have already added the `invite_as` field to models, we can now
replace usage of `invite_as_admin` properly with its equivalent `invite_as
== PreregistrationUser.INVITE_AS['REALM_ADMIN']`.
Hence, also removed now redundant `invite_as`.
This couples the behavior of Enter to Save with Enter to Send.
Extracts and exports functions responsible for checking if enter
does send/edit and handling default behavior otherwise.
Changes made in static/js/message_edit.js and
static/js/composebox_typeahead.js
Fixes#10320.
This adds two functions to static/js/composebox_typeahead.js.
should_enter_send(event) checks if enter should actually send.
handle_enter(textarea,event) emulates browser's default behavior
if enter doesn't send.
These two are just straight extractions of portions of the compose box
logic.
It's a bit dangerous for the user to hit escape
to close the feedback widget, since it can
disappear suddenly, but users will try it, and
we should just close the widget.
(Hitting escape should be a noop if the box
is closed, but now it goes to "All Messages".)
We only need these once, not during every show()
call. We actually were only setting up the
click handlers one time, but we had redundant
mouse handlers.
More importantly, we stop a runaway timer
that tries to fade out our feedback widget
every 100ms or ten times per second!
A few things are still hard coded, but the class exposes
show() and dismiss() now.
The show() method is configured with callbacks for
populate() and on_undo().
We calculate a few values higher up in the function.
This reduces a bit of code duplication and removes
a somewhat janky expression that happens against
a mutated list.
I use shorter var names in frb_botom() and do early
return in obscured_recipient_bar().
Also, we always call exports.hide() if we don't find
a valid recipient bar to "float."
There is no reason not to initialize people.js
super early in the process, as it only reads
data from page_params. Also, other modules
are likely to want its data during their own
initialization steps.
This is the preferred way to check that a user
id belongs to the current user.
We have a recent bug where the current user's
circle doesn't turn green right away. It's not
clear this is the fix, though. (It's hard to
repro locally.)
This is mostly for testing purposes. The code
structure here is pretty stable--we will probably
always use level() here to either sort or
group users, and being able to test it directly
is nice, rather than bringing in all the other
machinery.
This makes it possible it include our standard markdown formatting in
one's custom profile fields, allowing for links, emphasis, emoji, etc.
Fixes#10131.
While we're at it, we remove the JSON parsing that was part of the
user field code path, since this function isn't responsible for
rendering user fields.
Apparently, our custom profile fields feature was parsing the "user
list" field type in multiple places, and ignoring the results in one
of them. That code had been causing some confusion; the correct
solution is to just delete it, since the template rendering process
ignores that value for this field type.
Our logic for doing pageup/pagedown calculation inside compose was
written too tightly, and ended up breaking the keys inside message
editing.
Fix this by using generic selectors that don't hardcode compose.
Previously, messages with more than one line did not parse '/me' at
the beginning of the message. Since there's a reasonable way to
render multi-line messages, this commit adds support for doing so.
This change does potentially break with the expected behavior of other
slash commands, but it seems worth providing useful functionality over
a blind focus on consistency.
Fixes#11025.
If branch for showing the profile details would
not have executed if the subdomain was root ("").
The check was changed to check for select input
instead of checking for subdomain.
This avoids a bunch of potential confusion around users trying to
interact with these UI in situations that don't make sense.
(E.g. showing a menu to start editing the message when the menu is
already open).
Fixes#3802.
We instead get the specific fields from message
that we use. This is particularly helpful
for subject -> topic migration; we no longer
have to account for "subject" fields in
client-side templates.
This continues the effort to isolate "subject" references
to util calls.
Also, we fix a comment.
Finally, we use canonicalized operators in a switch
statement.
This adjusts the spacing so that the out-of-view notifications for
group PMs (which have particularly long text) don't end up with the
"x" to close the notification overlapping the text.
Fixes#11058.
As part of giving the stream/topic fields in the
compose box longer ids, I broke the autocomplete
code that handles re-focusing the cursor after
a user hits enter. The worst symptom of this was
that we tried to send a message before compose
finished (although it wouldn't fully deliver the
message).
The new code should be a bit easier to grep for
if we rename these fields again, as we explicitly
use selector syntax.
Previously, we were searching the whole message_row object for emoji,
mentions, etc., which has a bunch of UI elements that can't contain
the syntax we want to modify. This should be a slight improvement in
the performance of message post-processing, which runs a lot of times
and thus is fairly important.
This check caused us to only run the code inside that block if the
message mentioned the current user (since that's when the `mention`
class is added to the main message row).
While this was a useful performance optimization, it probably was a
small one, not worth it for the correctness cost.
This adds a new realm_logo field, which is a horizontal-format logo to
be displayed in the top-left corner of the webapp, and any other
places where we might want a wide-format branding of the organization.
Tweaked significantly by tabbott to rebase, fix styling, etc.
Fixing the styling of this feature's loading indicator caused me to
notice the loading indicator for the realm_icon feature was also ugly,
so I fixed that too.
Fixes#7995.
Logic for checking if the last message in the current table is visible was
already written in message_viewport.js; Code in notifications.js is changed
to reduce redundancy.
We are trying to carve room for a more specific
"user_status" concept, which refers to statuses
that users specifically set, like "I'm away".
So we call this function "update_presence_info",
which reflects that it's more about actual
"presence"--i.e. the user really is present
in the browser, even though the actual human
may not want to be disturbed.
The current user gets excluded from all non-empty
searches, even ones that match the user, since
it can look funny when the user's at the top of a
search, and you'd never need to search for yourself
(again, since the current user is at the top of
the buddy list).
Apparently, we didn't have one of these, and thus had a moderate
number of generally very old violations in the codebase. Fix this and
clear the ones that exist..
We move all of its logic into settings_sections.
Note that this is slightly more than a refactor.
We are slightly more aggressive about resetting
sections. For example, if you go into Settings,
then exit the overlay, then go into Manage
Organization, we will now reset sections for both
groups.
We now rely on set_up() methods to call their
own module-specific versions of maybe_disable_widgets()
in the codepath for admin_sections.load_admin_section().
And then for live updates, we just explicitly call
all four modules that support maybe_disable_widgets().
This should make switching between sections slightly faster,
and it also reduces the risk of module A messing with
module B's state. (Granted, we have lots of other ways
that modules can mess with each other's state.)
Bootstrap's typeahead is the main part of the project that we've
forked, and moving it to its own module should help unlock our ability
to upgrade bootstrap itself.
This form isn't actively used, which is how it ended up broken, but it
basically didn't display its content properly at all.
Convert it to use our standard white-box framework.
This still doesn't look great in various ways, but it's at least not
obviously totally busted now.
Since we're adding this to a large number of portico pages, there's no
guarantee that these pages actually have a CSRF input.
Though given that the logout template contains a CSRF input,
realistically it should always be present.
We weren't using the actual sorted data to find
the last element. This probably worked by accident
in some cases, but this commit makes it more
deterministic.
We want the return value from this for the next
commit, so we no longer call `format_drafts` indirectly
from `populate_and_fill`, and we rename the latter
to `render_widgets`.
We had an anonymous callback for drafts that was
hard to read. It's much easier to flatten the code,
give functions actual names, and stub them as needed
in the unit tests.
Since we're adding this to a large number of portico pages, there's no
guarantee that these pages actually have a CSRF input.
Though given that the logout template contains a CSRF input,
realistically it should always be present.
If a user has an old mention and has since been renamed, there's
really nothing for us to do to render it; we should just return as
though we have no data.
Fix an issue that when a message is being edited, sometimes compose
options are hidden if there is no time limit. Also, move the options
further from the time limit to make them more noticeable.
Fix#11056.
The `replying_to_message` field was used in some
early versions of compose fade, but it has no more
use in the current code.
The drafts implementation didn't really make any sense,
anyway, as we were claiming to reply to the same
message we were drafting.
A common source of confusion for new users is sending a message when
you're scrolled up in the message feed; in this case, it's nice to
communicate to the user why the message is not in view.
Fixes#10792.
Restructured by tabbott to replace overly complex logic for getting
the position of the new message with a `message_list.get_row()` call.
Now, we correctly avoid calling various password quality/strength
functions in the registration flow in the event that there isn't a
password form on the current page.
Before, some code wasn't inside a block at all, while other code was
using an incorrect check (an empty jQuery object is not falsey).
The overall result was that this would often crash on certain
pages/flows, stopping JS execution and causing various secondary
problems.
The first bug fixed here has been around for a long
time--we were redundantly updating unread counts
indirectly via muting_ui.initialize(). The
unread counts also get updated in
unread_ui.initialize(), when we have more valid
state. (And it's worth noting here that the unread
counts get updated yet again once message fetches
complete.)
The second bug was a very recent regression from
my recent stream name -> stream id cleanup in the
muting system. We now depend on stream_data to
initialize muting data, so we need to initialize
muting.js slightly later in the process.
These fixes are intertwined, because they were both
somewhat caused by the anti-pattern of having
muting_ui.js initialize unread_ui.js and muting.js,
instead of doing more direct, fine-grained initialization
from ui_init.js.
Essentially we replace this code:
exports.update_muted_topics = function (muted_topics) {
muting.set_muted_topics(muted_topics);
unread_ui.update_unread_counts();
};
with this:
exports.initialize = function () {
exports.set_muted_topics(page_params.muted_topics);
};
And the modules load like this:
stream_data
...
muting
...
unread_ui
And we don't need any page-load initialization for muting_ui,
which is mostly used for Settings/Muted topics.
This function used to be called initialize_from_page_params(),
and we called it indirectly through `subs.js`.
Now we call it directly from `ui_init.js`, which gives us a
bit more control over how things are initialized. In fact,
this sets us up for the next commit, where I fix a recent
regression I introduced.
The data attribute here has some value if you're
inspecting the HTML in the browser, but it's not
worth the extra code.
All the list items have data-stream-id, so there's
no need for the parent to have it.
The stream_list test that was fixed here was sort of
broken. It accomplished the main goal of verifying
what gets rendered, but now the data setup part is
more like the actual app code (and simpler, too).
This fixes the most core data structures inside of
muting.js. We still use stream names for incoming
data to set_muted_topics and outgoing data from
get_muted_topics.
This will make us more resilient to stream name changes.
Before, if you were logged on when a stream rename
occured, topics that were muted under that stream would
appear to be unmuted. (You could fix it with a reload,
but it can be jarring to have a bunch of unread messages
appear in your feed suddenly.)
Fixes#11033
The fixture changes are because self.upgrade formerly used to cause a page load
of /billing, which in turn calls Customer.retrieve.
If we ran the full test suite with GENERATE_STRIPE_FIXTURES=True, we would
likely see several more Customer.retrieve.N.json's being deleted. But
keeping them there for now to keep the diff small.
Like the other similar commits, we were doing the same work in all
code paths, just with a much more error-prone approach.
We can also now remove the now-unused finish_initial_narrow function.
Like the other commits in this series, we were already doing this in
all of the callers of load_messages; this centralizes that logic in a
less ad-hoc feeling way.
We no longer use or need the start_initial_narrow function.
Previously, each individual caller of load_messages that passed
num_before > 0 would do its own manual management of fetch_status;
now, we just do it inside load_messages.
Apparently, the older side of the FetchStatus object for home_msg_list
was incorrectly not being maintained. We got away with this, because
the do_backfill code path (which runs after we're done with the
load_more cycle) will correct the error for found_oldest. But we
didn't have proper handling for history_limited here.
When we're doing the load_more frontfill, we were not correctly
declaring that we were in the process of doing a fetch. Because the
next load_more call clears this state anyway, this was generally a
short race, off-screen, but it is still a data flow bug.
See the upcoming commits for a refactor that will eliminate the
possibility of this sort of bug.
When a user's name is edited, currently we still show the old name is
mentions (though clicking on the item does the right thing).
However, at present, it creates a new problem in search results, where
the highlighting is removed by this substitution.
This styles the avatar and username that show when the registering
user is importing their settings from an existing Zulip account.
Tweaked by tabbott to fix the test/linter failures, a bit of styling,
and tag strings for translation.
A bug caused background links to open even when a modal in the user
settings overlay was active in the foreground. This commit fixes this
by disabling mouse events for the background when the modal is active,
and restoring them as soon as the modal starts closing.
Fixes#10654.
This adds a line to static/js/hotkey.js for focusing the "Close"
button. Tweaked by tabbott to make more clear that we don't expect
there to ever be both a close button and a save button, since in that
case this code would be busted.
Fixes: #3830.
The stream/topic edit areas now have these ids:
#stream_message_recipient_stream
#stream_message_recipient_topic
They are pretty verbose, but being able to grep
for these without noise does have some value.
Also, add a new notification sound, "ding". It comes from
https://freesound.org, where the original Zulip notification sound comes
from as well. In the future, new sounds can be added by adding audio
files to the `static/audio/notification_sounds` directory.
Tweaked significantly by tabbott:
* Avoided removing static/audio/zulip.ogg, because that file is
checked for by old versions of the desktop app.
* Added a views check for the sound being valid + tests.
* Added additional tests.
* Restructured the test_events test to be cleaner.
* Removed check_bool_or_string.
* Increased max length of notification_sound.
* Provide available_notification_sounds in events data set if global
notifications settings are requested.
Fixes#8051.
The Casper code that I eliminated here seems to be
bogus, in that I don't think it really waited for
all the clicks.
I **think** the intent of the test was to verify that
when you leave settings and go back into it, it remembers
the panel. I was able to verify this manually.
We have an upcoming change that lets us use the
back button after going arrowing through multiple
settings pages.
Without first adding this commit, we would have an
infinite loop when you came back to '#settings' and
then '#settings' would rewrite the url with the current
hash.
Just replacing the browser state allows the browser
to do the right thing.
The history protocol is pretty well supported:
https://caniuse.com/#search=history
We can eliminate the janky `setup_page` methods
and just pass in section from `hashchanged`.
This sets us up to handle browser history more
nicely when you load '#settings' and we could essentially
redirect you to '#settings/your-account' (or similar
things). A future commit will address that.
We also use `launch` as the new entry point, which
is more consistent with other modules.
The prior name of this was a bit inaccurate, as we no
longer ever hide the menu item for non-admins. Also,
it belongs more naturally in `gear_menu.js` at this point.
Also, we remove one call to this, which was in a place
where it was no longer necessary.
We now run the code to disable widgets every time
we reload a section, which was the original intention
of the code, but the call to it only happened when
you first launched the page.
We also continue to run this logic for live updates
of is_admin, although it's worth noting that the
code still only handles the "demotion" case of going
from admin to non-admin. (If somebody makes you an
admin, you continue to need to reload to get
widgets enabled.)
This ensures the "account settings" UI for managing a user's own email
address uses the delivery email, since that's what users care most about.
Eventually, we'll need to add support for at least viewing both email
addresses in "account settings", but this is the right long-term
behavior.
This new setting is still hidden in the UI when not in the development
environment, because the feature isn't ready for production, but
merging this will help simplify future work on the feature.
When the list of recipients of a group private message conversation is
truncated due to being long in the "Private messages" area, we didn't
provide easy access to the full list of people. Fix this by adding a
title attribute for the area.
Fixes#10978.
This correctly shows guest users that they cannot interact with
anything in the "Organization" tab, though we preserve the read-only
access to it so that they can (e.g.) browse the organization's custom
emoji.
Previously, Topic editing was offered in the UI even to message
senders and organizations admins only if the message was no more than
one day old. This was correct for the "community topic editing" case,
but not for message senders and organization admins.
While we're at it, this also centralizes some previously haphazard
logic to always call message_edit.is_topic_editable().
Tweaked significantly by tabbott to fix the logic.
Closes#10568.
The goal here was to enforce 100% coverage on
parse_narrow, but the code has an unreachable line
and is overly tolerant of bogus urls. This will
be fixed in the next commit.
Also adds relevant tests and documentation. We currently
do not narrow to a new topic, and instead just narrow to
the stream. Similarly, we do not narrow to a PM if any of
the recipients are invalid.
We stopped setting this nearly five years ago, as part
of bd9cccffce
The big conditional that I removed here should have
always evaluated to false, as I understand the code.
Presumably either the browsers handle # -> '' redirects
better now, or we address this somewhere else in our
codebase.
We ignore keystrokes like alt-left-arrow and alt-right-arrow,
so that the browser can do back/forward.
We may need to refine the handling of ctrl/alt/shift in the
future, but now we only support single-key operations.
This change removes all the complexity around
get_hash_group(), and we now only go into the
"same overlay" logic within Settings or within
Manage Organization, but not between them.
This means if you're in Settings but hit the back
button to something under "#organization" we now
do "more stuff", since we want to err on the side
of reloading sections, etc.
There's not much flicker in my testing, and
this is not a super common transition, anyway.
This code brings the focus to the first input field with errors rather
than just the first input field present in the form after the sign up
form is rendered again after invalid data is submitted.
Note from tabbott: This still doesn't handle the ToS checkbox being
the source of the error, but that's an independent issue.
Fixes#10869.
Add a lock icon to the right of tabs on which nothing is editable
for normal users. Add lock next to Custom emoji option if only admin
can edit them.
Tweaked by tabbott to use title for the lock icons, rather than
aria-hidden, since they do convey useful information.
Fixes: #10893.
Positioning using flexbox makes life much easier for everyone. With
this change we make positioning of icon relative to the label in the
dropdown menu much easier to do and alter if required. We now no
longer need to fiddle with tedious pixel measurements for placing the
icon in the right place.
As a result of this commit we had to change a click event binding
back to be associated with .dropdown-toggle class rather than being
associated with the h3, i because of the re-arrangement of the
dropdown configs.
The integration categories dropdown was too wide in comparison to
the category lozenges and hence this commit attempts to smooth up
the UI a bit on that front.
Here we just fix the behaviour of angle icon which is present
in the integration categories dropdown. It used to change direction
from down to right only if "All" options from the dropdown was
selected (which is also the initial and default option). This behaviour
was pretty inconsistent and looked odd. Rather than having a direction
changing icon here, it migth be just better to stick with just the
down facing angle arrow. Arrow direction in general represents in
which direction the dropdown is gonna open up (in addition to the
fact that a dropdown exits here).
We make the integration categories dropdown gradually slide down/up
rather than appearing instantenously. I believe this gives a better
look to the dropdown and how it behaves.
We also fiddle a bit with the code relating to angle icon in the
dropdown. Basically though its behaviour was already buggy and
will be addressed in an upcoming commit, we try to maintain whatever
behaviour it had before introduction of the annimation effect.
The issue here was that if we opened up integrations page in
responsive mode (so the integrations category sidebar turns into a
dropdown) and click a few centimeters outside the actual dropdown
or perhaps the dropdown menu when its open, it is possible to toggle
or select a integration category.
What this essentially means is that clicking in blank area outside
visible boundaries of dropdown menu its possible to interact with it.
Fix: We change elements on which the click event is tied to and
adjust a bit of CSS for relevant elements so things look as they
used to but function in correct or better manner.
What is the buggy behaviour?
Before this commit if you were to open the integrations docs page
in a smaller window so that the integrations categories sidebar
changed into a dropdown (so that our page is responsive to
screen size), one would notice that selecting a category from the
dropdown menu didn't make dropdown to auto collapse. This feels very
uncomfortable from users prespective since an ugly dropdown with all
the categories sticking around uncollapsed kind of defeats the purpose
of having a dropdown.
Fix: We make the categories dropdown toggle/auto collapse upon
selection of a category.
Fixes part of #10026.
Adds additional option to typeahead:
`tabOpensEmptyTypeahead`(default: false):
tabOpensEmptyTypeahead overrides helpOnEmptyStrings.
This commit sets helpOnEmptyStrings to false and
tabOpensEmptyTypeahead to true. Now typeahead will
open on an empty string only if Tab has been pressed.
Fixes part of #10026.
NOTE: The Tab key will select option from typeahead if the typeahead
is already open i.e the same behaviour as Enter.
NOTE: This behaviour applies irrespective of search pills are enabled
or not.
Even prior to my recent change in settings_panel_menu.js,
we were assigning window.location.hash a value that doesn't
have a '#' prefix. This probably doesn't matter too much
for the browser, but it does confuse our own checks about
whether we're redundantly updating browser history.
Now we prefix the settings hash with '#' and we encorce
this convention with a blueslip error.
Just calling update_browser_history is sufficient
here, and we end up short-circuiting some code
in hashchanged():
* we don't need to set state.old_hash, because
that's what update_browser_history does
* we bypass the is_overlay_check, which is always
false in this context
For stream links inside messages (like "#social") we
now use these functions:
hashchange.go_to_location:
We don't need to set href. Relative paths
are more standard, and the url is already
encoded.
hash_util.by_stream_uri:
This saves a step in building the URL.
We call hashchanged.update_browser_history() when
we switch panels. This API short circuits the
hashchanged callback and avoids code churn.
(We weren't actually double rendering, as the downstream
code does nothing at this point, so this is more
just preventig a pitfall and moving to a consistent
API.)
Before this commit, we would sometimes have
the toggler handle clicking or arrowing to
the All tab, but then also rewrite the hash
which caused us to re-process the event.
Now we only call update_browser_history()
in the callback handler from the toggle widget.
There's a bit of refactoring to make this happen,
but the call stacks end up being this:
call toggler.goto(...)
# callback is dispatched
call subs.switch_stream_tab
actually_filter_streams
update_browser_history
While they can share some code, opening the edit panel
for a stream and clearing the panel are pretty different
actions, so we simplify the API for each thing.
You no longer have to pass in booleans, and for the clear
case, you don't have to pass in a bogus node that just
gets ignored.
This fixes a bug where hitting the "n" hotkey was
causing double work related to the hashchange system.
The code is now organized like this:
do_open_create_stream() does the GUI piece
We call the above directly for hash changes.
For in-app actions, whether clicks or hotkeys,
we call open_create_stream(), which delegates
most of the work to do_open_create_stream() but
also updates the hash.
This diff looks a bit more complicated than it really is.
We had a bug where we'd call subs.change_state for
non-streams-related changes. The bug probably barely
impacted customers, since it's hard to get into that
situation unless you're in "Settings", and then the
code mostly did nothing. There's still a deeper issue
of what we actually do want to for settings changes,
but this fix does not address that.
We invert the conditionals related to internal state
changes, so that we can handle internal state changes.
And we make sure to only call subs.change_state if our
"base" is "streams".
This is mostly extracting the code within the `if`
block, as well as setting `base`, which wasn't used
elsewhere.
Also, the `else` no longer calls `is_overlay_hash`,
which was a redundant check.
This is definitely a micro-optimization, but avoiding
creating an extra object speeds up page loads by about
20ms per 1000 streams.
It's slightly sketchy to mutate the value in place, but
the original value never gets used again.
We now let color_data keep its own state for
unused_colors, so that we longer have to pass in
a large list of unused_colors every time we want
to assign a new stream color.
This mostly matters at startup, where we might
be cycling through 5000 streams. We claim all
the unused colors up front.
Each operation now has an upper bound of expensiveness,
where the worst case scenario is basically popping
off the first element of a list of <= 24 colors.
The algorithm is now deterministic, too, to make
it easier to test. It's unclear whether random color
assignment ever had much benefit, and it made unit
testing the algorithm difficult. Now we have 100%
line coverage.
Fixes part of #10902.
When there is some error in connecting to server(more specifically to the
tornado server) the "Unable to connect to Zulip" connection error message
gets cleared as Django server could send the response of "get" request of
old messages and hence get_old_messages_success hides the error message
even though the connection is not properly established.
Fixes: #5599.
This commit fixes bug: When user clicks on remove-user-pill-btn,
it closes the parent modal instead of removing user pill from input.
This happens because button has class `exit` and there is click
event listener on all `exit` class buttons, which closes modal.
Fix this by adding `e.stopPropogation` to remove-user-pill listener.
While we don't actually need another tooltip on /stats right now, this
provides a clear approach for how to do that. We've since added
tooltips in various other parts of the webapp, and that code is pretty
copy-pasteable, so I think it's reasonable to say this closes#4612.
Cleaned up by tabbott to remove a bunch of unnecessary changes.
This code prevents the password bar from being incorrectly clear after
the sign up form is rendered again after invalid data is submitted
(generally due to forgetting to agree to ToS).
Fixes#10868.
I think this will fix a Casper flake where there was a race
window with multiple temp DOM elements holding copied text.
I also add a comment to the code I think causes this race
for the tests.
Previously, because the parens were added via CSS, copy-pasting the
EDITED notices resulted in junk like this:
Iago 3:51 PMEDITED
edited message content
Now, you get:
Iago 3:51 PM (EDITED)
edited message content
Status messages were incorrectly not selectable, due to a bug in how
we setup the no-select hierarchy (for making copy-paste not have weird
whitespace issues).
Fixes#10456.
For many years we have been excluding the current user
from the buddy list, since their presence is kind
of implicit, and it saves a line of real estate.
This commit removes various user-is-me checks
and puts the user back for the following reasons:
* explicit is better
* newbies will be less confused when they
can see they're actually online
* even long-time users like myself will
feel more comfortable if it's just there
* having yourself in the buddy list facilitates
things like checking your presence or sending
yourself a message
* showing "me" reinforces the meaning of the
green circle (if my circle is green and I'm
active, then others with green circles must
be active too)
* If you're literally the first user in the
realm, you can now see what the buddy list
looks like and try out the chevron menu.
The biggest tradeoff here is the opportunity cost.
For an org with more people than fit on the screen,
we put the Nth person below the fold to show "me".
I think that's fine--users can still scroll or
search.
This commit doesn't do anything special with the
current user in terms of sorting them higher in the
list or giving specific styling.
Fixes#10476
We reduce nesting of code by just early-exiting
for the `is_current_user` check.
This also forces us to be a bit more thorough
with our tests if we want to maintain line
coverage.
For message groups, I just changed the internal name
to "topic_links".
For uses of "subject_links" that are tied to how the
server names fields, I introduced these wrappers:
* util.set_topic_links(obj, topic_links)
* util.get_topic_links(obj)
These can be used for either messages or events.
Previously, messages were a string of disconnected regions. Modeling them as a list brings several benefits:
* Quickly jump to the message list by using a screen reader's list navigation hotkey.
* Quickly jump between messages by using a screen reader's list item navigation hotkey.
* Quickly jump to the beginning or end of message lists in screen readers that support it.
This is a nice performance optimization for the rare case where the
user does quote-and-reply on a message, aborts the compose, and then
re-does the quote-and-reply.
We split out two new functions and call them
everywhere that we used to call add_display_time():
- `update_group_time_display`
- `update_timestr`
We also make some of the local vars more consistent,
as well as doing more explicit clearing of vars than
`delete`.
Splitting these functions will allow us to muck with date
dividers without affecting the `update_str` functionality.
Change wording of public stream description to
"Any member of the organization" from "Anybody"
to indicate that guest users can't subscribe even
public stream of organization.
Previously, when a new stream was created on a client other than the
current one, the browser would first receive the "stream_created"
event, and make up a client-side display color at that time to use in
the "stream settings" view (it doesn't yet know the color that was
selected when the user was actually subscribed, because it doesn't
even know yet that the user is being subscribed to this stream), and
then moments after it'll receive a "susbcribe" event letting the
client know that the user is subscribed (and specifying the color to
use).
However, due to an argument not being passed through properly and a
missing rerender, we were not properly updating either the data
structures or doing a stream colors rerender in order to show the new
color.
This fixes the issue reported in
https://chat.zulip.org/#narrow/stream/48-mobile/subject/stream.20colors/near/660170
This moves the deactivate account which was previously placed under
"SETTINGS / YOUR ACCOUNT" -> "Deactivate account" to "SETTINGS / YOUR
ACCOUNT" -> "User settings" for making it more visible.
Use the placeholder `[Quoting…]` when quoting and replying before the
quote has been added to the message. Also, add tests to the
`compose_actions` Node tests for the new behavior.
Fix#10705.
Guest users can't access subscribers of any(public or private)
non-subscribed streams. Therefore, hide subscribers list
of all non-subscribed streams from guest users in UI.
Fixes#10749 (the previous parts were fixed already).
This will change the hash of the URL when a new tab
gets selected. Vice versa when the billing page is opened
the appropriate tab is selected according to hash of
the URL. This means when the card gets updated the
page would be reloaded correctly to show #payment-method
tab.
When a user clicks the compose `+` button, create a popover at the
bottom right of the screen including buttons for opening a new stream
message or a new private message.
Use CSS to display a `+` button on mobile but keep the more verbose
buttons on desktop. In the future, this button will be used to display
a popop for a new message.
Guest users can't subscribe themselves to streams, so we shouldn't
display the subscription button at end of stream message view.
Fixes part of #10749.
Guest users can't subscribe themselves to any stream, so we hide the
"Subscribe" button. Previously, it was showing Subscribe button after
a guest user unsubscribed from a stream.
Fixes part of #10749.
The "notification settings" page previously advertised support for
mobile push notifications via checkboxes, even if the server hadn't
yet been registered for push notifications. This was a frequent
source of onboarding pain for new Zulip organizations.
We fix this by providing a clear warning and disabling the relevant
inputs on the settings pages.
Modified significantly by tabbott to correct some tricky logic errors
as well as some copy-paste bugs.
Fixes#10331.
We want to avoid `blueslip.error` in cases where
the root cause could just be bad data that is
human-entered.
There are a few callers here who **should** be
sending good data all the time, but hopefully
they either have good test coverage, other
obvious failure symptoms, or, ideally, just
do what the user would mostly expect in the
face of bad data.
This supports guest user in the user-info-form-modal as well as in the
role section of the admin-user-table.
With some fixes by Tim Abbott and Shubham Dhama.
This is the natural behavior that most users will
probably expect. If you need to go to All Messages when
topics are zoomed in, you can just hit ESC twice.
Before this change, if you hit ESC, then hotkey
code would call search.clear_search, which would
call narrow.deactivate(), which would then use
`$('#search_query')` to clear a value, but then
let search.clear_search blur the input and
disable the exit button. It was all confusing.
Things are a bit more organized now.
Now the code works like this:
hotkey.process_escape_key
Just call narrow.deactivate.
$('#search_exit').on('click', ...):
Just call narrow.deactivate.
narrow.deactivate:
Just call search.clear_search_form
search.clear_search_form:
Just do simple jquery stuff. Don't
change the entire user's narrow, not
even indirectly!
There's still a two-way interaction between
the narrow.js module and the search.js module,
but in each direction it's a one-liner.
The guiding principle here is that we only
want one top-level API, which is narrow.deactivate,
and that does the whole "kitchen sink" of
clearing searches, closing popovers, switching
in views, etc. And then all the functions it
calls out to tend to have much smaller jobs to
do.
This commit can mostly be considered a refactoring, but the
order of operations changes slightly. Basically, as
soon as you hit ESC or click on the search "X", we
clear the search widget. Most users won't notice
any difference, because we don't have to hit the
server to populate the home view. And it's arguably
an improvement to give more immediate feedback.
If you zoom into "more topics" for a stream that has
a LOT of topics, and then scroll down to the bottom,
and then zoom out by selecting "All messages" or
similar upper-left-sidebar options, we now try to scroll
the more recently active stream back into place after we scroll
out.
Before this change, it was possible for your lower left
sidebar to appear empty, as it would keep the
scroll offset from "more topics".
If our topic list isn't zoomed in, avoid calling
stream_list.zoom_out_topics().
This commit also introduces `zoomed_in` to track
our topic zooming state.
This small modules nicely breaks down the
responsibilities of topic_list and stream_list
when it comes to zooming in and out of topics
(also known as hitting "more topics" or "All
Streams).
Before this, neither module was clearly in
charge, and there were kind of complicated
callback mechanisms. The stream_list code
was asking topic_list to create click handlers
that called back into stream_list.
Now we just topic_zoom set up its own click
handlers and delegate out to the other two
modules.
This fixes a regression from here:
88b4a9f2d7
The fix didn't account for how huddles are
represented as comma-delimited strings.
We also simplify the logic by extracting a
function and doing early-exit for simple
cases.
Internally we generally omit our own id and email
in data structures related to PMs, except when we
are the sender, but if we receive "perma links"
we will need to filter out our id.
This reflects the newly selected value of role in "role" column under
active-users section and deletes the redundant admin-icon updation code(
As we already removed bolt admin-icon)
New user avatar width is not maximum when user upload
new image. Because wrong html element is accessed for
setting value of image src attribute.
This commit removes these code from success of ajax call,
cause we already handle this in event `user_events - avatar_url`.
This deduplicate code for the checkboxes which are dependent on other
parameters and it makes no sense changing them when that parameter is
false. For example, changing `message_content_in_email_notifications`
makes sense only when `enable_offline_email_notifications` is true.
There is need for such a helper because `unless` executes to be true even
when we haven't passed the context variable on which we are checking the
conditional statement.
We drop support for usage of `icon-vector` as base class when
including icons from font awesome icons package.
Now on, only icons as specified in font awesome v4.7.0 can be used
in the code base.
We now ask compose_pm_pill to give us a list of user
ids that we are PM'ing to, and we only convert user
ids to emails right before we put requests on the wire.
We also let the "pill system" tell us whether we
have unconverted data.
It also sets up for an upcoming server change where we
can just send user ids to the server.
This change should be transparent to the majority of users.
For Zephyr users we are slightly less aggressive about
sending typing indicators, since we now require valid
user ids.
This module makes it really easy to create are-you-sure
dialogs for dangerous operations.
Basically it's one function with five parameters. You
give three chunks of HTML, a callback function, and
a parent container.
The first use of this will be in settings_user_groups,
coming up in a couple commits.
This removes some unnecessary code duplication in the CSS classes for
Google and GitHub authentication social auth buttons.
This will, in turn, help us avoid extra work every time we add a new
authentication backend.
Changes -
a) Updated the border-radius to 4px for all the buttons.
b) Increased the margins between the labels and inputs.
These changes affect the login and register page's styling.
Previously we only added the active class to the Date uploaded
column, thinking it was already sorted by upload date by default.
However, it wasn't, so now we explicitly make a call to sort it by upload
date to fix an issue with broken sorting.
Fixes#10518.
I don't know how long this has been broken, but it seems
some re-design of our message feed moved the Subscribe
button out #zfilt, so we use a different parent selector
now to turn on the click handler.
Hopefully this was a pretty obscure bug. To reproduce
it go to "Manage Streams" and then select a stream you're
not subscribed to (from "All Streams"), and don't actually
subscribe, but then hit "View stream".
The user experience here is still a bit confusing, but
this is just a quick fix.
Previously, if someone updated his/her name from accounts page and closed
the modal and then reopen the modal, the page still had the old name as
we use `page_params.full_name` in `accounts-settings.handlebars`. This
commit fixes this bug.
Fixes: #10529.
Since now we have email notifications for streams messages too, so
there is no direct dependency of
`message_content_in_email_notifications`checkbox on
`enable_offline_email_notifications` setting and neither we can say it's
dependent on `enable_stream_email_notifications` as well because we may
have email notifications set for individual streams. So removing this
checkbox dependency is the best solution here.
Tim Abbott
Vishnu Ks
Steve Howell
Rishi Gupta
Vaibhav
Harshit Bansal
Anders Kaseorg
Mohit Gupta
Pragati Agrawal
YashRE42
Puneeth Chaganti
Rohitt Vashishtha
Natsu Kagami
Hemanth V. Alluri
Amadeo234
Abhinav Singh
butchyyyy
overide
Shubham Dhama
kunal-mohta
ss62171
Adarsh Patel
TharunThomas8
ishanrai05
Yashashvi Dave
Jeswin
Aditya Bansal
Shoumorup
Marco Burstein
Akash Nimare
AsociTon
varunvaruns9
Cynthia Lin
Archit Kaushik
Eeshan Garg
seresheim
Joshua Pan
Max Nussenbaum
Aditya Jain
Marco Burstein
onkar shedge
Roger Souza
psg0796
Shubham Padia
dipu989
Scott Lee
Balaji2198
Nikhil Kumar Mishra
Nolan Darilek
Shikhar Vaish
Aditya Ramesh
Akash Nimare
Lenny Jagielski
Adam Birds