Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
4,703 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

206 Commits

Author SHA1 Message Date
Jason S. McMullan 913649de2e loop_sdcard: Add loopable SD card file sections 
To support continuous belt printing, add nestable repeat
loop support via an `[sdcard_loop]` module.

Supported G-Code:
  - SDCARD_LOOP_BEGIN COUNT=n  ; Loop for N times, or infinitely if N is 0
  - SDCARD_LOOP_END            ; End of loop
  - SDCARD_LOOP_DESIST         ; Complete all loops without iterating

Marlin M808 compatibility example in `config/sample-macros.cfg`:
  - M808 Ln        ; Loop for N times, or infinitely if N is 0
  - M808           ; End of loop
  - M808 K         ; Complete all loops without iterating

Added unit tests in test/klippy/sdcard_loop.test

See https://reprap.org/wiki/G-code#M808:_Set_or_Goto_Repeat_Marker

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
 2021-05-26 11:57:57 -04:00
Matthew Lloyd 93add3a095
config: Add printer-fokoos-odin5-f3.cfg (#4286) 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
 2021-05-12 15:00:06 -04:00
Kevin O'Connor 4799d05d42 config: Add generic-ruramps-v1.3.cfg to test cases and minor updates 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-12 10:25:41 -04:00
Kevin O'Connor c9e8298c36 config: Minor updates to printer-velleman-k8800-2017.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-06 11:38:31 -04:00
Jason S. McMullan 44387568f3 config: Add Creality CR-30 PrintMill support 
Add support for the Creality CR-30 'PrintMill', and its base board,
the Creality v4.2.10.

Add them to the `test/klippy/printers.test` test suite

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
 2021-05-06 11:07:18 -04:00
Tircown f2c74ec023
kinematics: Add hybrid-corexy and hybrid-corexz (#4229) 
Signed-off-by: Fabrice GALLET <tircown@gmail.com>
 2021-05-03 14:31:23 -04:00
George Fu fee386b8e2 config: add example configs for fysetc spider board 
Signed-off-by: George Fu <nailao_5918@163.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-03 12:01:00 -04:00
Johannes Stuettgen ed6ab6b9cc screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant. 
This is useful when a saved bed mesh is used to ensure that the bed level
has not drifted too far from where it was when the mesh was created.

Signed-off-by: Johannes Stuettgen <johannes.stuettgen@gmail.com>
 2021-04-28 11:53:18 -04:00
Kevin O'Connor dfccc872b1 test: Add printer-creality-cr6se-2021.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-22 21:18:45 -04:00
Kevin O'Connor c5f1835bec config: Add printer-flashforge-creator-pro-2018.cfg to test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 13:58:24 -04:00
Kevin O'Connor dcf6d30aba config: Updates to printer-tronxy-x5sa-pro-2020.cfg 
Minor updates to use default values.

Also, add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 00:16:09 -04:00
Kevin O'Connor de8eb884b4 test: Add generic-bigtreetech-skr-2.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-13 21:08:24 -04:00
Demetrius Apostolopoulos bf01d6d1f8
config: Added config for Eryone Thinker Series (#4096) 
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
 2021-04-07 14:10:59 -04:00
Kevin O'Connor b0f94e50ee test: Add printer-hiprecy-leo-2019.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-07 18:58:08 -05:00
Kevin O'Connor a1072be7eb test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-22 15:29:34 -05:00
Kevin O'Connor 7e21350989 config: Rename generic-mks-robin-nano.cfg to generic-mks-robin-nano-v1.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-20 10:17:16 -05:00
Kevin O'Connor 83552f6ea6 config: Add example generic-mks-robin-nano-v2.cfg config 
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-20 10:17:16 -05:00
Kevin O'Connor 023eeceb2a config: Add example generic-mks-robin-nano-v3.cfg config 
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-20 10:17:16 -05:00
Kevin O'Connor 093db5172e test: Add printer-robo3d-r2-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-19 11:15:49 -05:00
Kevin O'Connor 319c36df52 config: Update generic-bigtreetech-gtr.cfg 
Add generic-bigtreetech-gtr.cfg to printers.test.  Add definitions for
thermocouple and temperature_mcu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-12 17:48:49 -05:00
Kevin O'Connor dfd052511f config: Add generic-mks-rumba32-v1.0.cfg to tests 
Also remove copy of lcds from sample-lcd.cfg

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-11 18:23:42 -05:00
Kevin O'Connor 3162f4746f test: Add printer-creality-ender3max-2021.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-02 18:16:40 -05:00
Kevin O'Connor bc137f3dd7 test: Add printer-creality-cr6se-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-24 10:54:31 -05:00
Kevin O'Connor ee7230893d test: Add printer-longer-lk4-pro-2019.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-10 11:21:26 -05:00
Kevin O'Connor 750c157000 config: Add example generic-bigtreetech-skr-mini-mz.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-09 18:30:04 -05:00
Kevin O'Connor f79187d726 config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file 
Reported by @kinggrave.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-05 12:04:37 -05:00
Kevin O'Connor 02ece242d1 config: Add example generic-fysetc-s6-v2.cfg config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-04 01:58:39 -05:00
Kevin O'Connor 074148d983 test: Add printer-creality-ender6-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-21 11:08:24 -05:00
Kevin O'Connor 7dcc778b6c stepper: Calculate step_distance from rotation_distance 
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Pranas Kiziela 0bebdf11c2 config: Add example printer-twotrees-sapphire-plus-2020.cfg config 
Signed-off-by: Pranas Kiziela <pranas.kiziela@gmail.com>
 2020-12-15 08:52:24 -05:00
Kevin O'Connor 5773654a00 config: Minor changes to printer-sunlu-s8-2020.cfg 
Remove default parameters from heater_fan section.  Add to
printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-26 12:26:11 -05:00
Kevin O'Connor b24a547cfe config: Minor updates to printer-monoprice-select-mini-v2-2018.cfg 
Minor indentation changes and remove default values for heater_fan.
Add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-25 20:41:39 -05:00
Kevin O'Connor 15b5dbaf8f docs: Move config reference information to new Config_Reference.md 
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-18 20:10:21 -05:00
Kevin O'Connor 0bf0cb5b54 config: Add a generic-creality-v4.2.7.cfg example config 
Reported by @Feche and @yjh0502 .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-29 12:00:09 -04:00
Guy Shapira a79c57ab29 test: Add pwm tests 
Signed-off-by: Guy Shapira <gayuha@gmail.com>
 2020-09-26 20:26:44 -04:00
Kevin O'Connor d0c5802fe2 config: Add printer-creality-ender3pro-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-30 21:53:26 -04:00
Kevin O'Connor 1d201c3592 config: Minor updates to printer-tronxy-x5sa-v6-2019.cfg 
Minor changes to default config and add to printers.test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-30 13:04:40 -04:00
Oliver Fawcett-Griffiths bc30414362
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) 
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
 2020-08-23 08:35:01 -04:00
Kevin O'Connor 4c5e93d51d gcode: Split G0/G1 command handling to new gcode_move class 
Split up the main GCodeParser class into GCodeDispatch and GCodeMove
classes.  The GCodeMove class is now available using the "gcode_move"
printer object name.  This split simplifies the gcode.py code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-20 21:03:22 -04:00
Kevin O'Connor b2c78d71b0 gcode: Remove "action_" commands from get_status() calls 
Rename printer.gcode.action_emergency_stop() to
action_emergency_stop(), printer.gcode.action_respond_info() to
action_respond_info(), and printer.gcode.action_respond_error() to
action_raise_error() in command templates.

This simplifies the get_status() interface, as returning callable
functions from that interface was confusing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-20 21:03:22 -04:00
Kevin O'Connor 68e9a495dd config: Minor updates to printer-creality-ender3-v2-2020.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-02 16:27:31 -04:00
Voron 9213646c63
corexz: Add CoreXZ kinematics (#3129) 
Add a CoreXZ kinematics

Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
 2020-07-30 12:42:23 -04:00
Kevin O'Connor 541665679e config: Add printer-creality-ender5plus-2019.cfg example config 
Reported by @mihaiserban.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-25 12:45:47 -04:00
Kianusch Sayah Karadji 2ae6c220e3 config: Example configuration for MKS Robin E3D/E3 
Signed-off-by: Kianusch Sayah Karadji <kianusch@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-25 12:37:10 -04:00
Kevin O'Connor 5d26c2a08e gcode_arcs: Add back in support for E moves in absolute extrude mode 
This reverts commit 43fa41c1af.

The above commit disabled absolute extrude moves because it was
unclear if the code would work properly when an M221 extrude factor or
G92 offset was in use.  However, since the calculation is done
relative to the raw E position and is sent as a raw E position to
gcode.cmd_G1() these modes should not matter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 15:25:17 -04:00
Kevin O'Connor 2da7d65402 config: Add example config printer-makergear-m2-2016.cfg 
Reported by @N5QM.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 12:01:30 -04:00
Kevin O'Connor 3a3ea90ba5 config: Fixes for generic-bigtreetech-skr-mini-e3-v2.0.cfg 
Add config file to printers.test.  Fix errors in config and unify
settings with the mini-e3-v1.2 config.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 11:46:57 -04:00
Kevin O'Connor c3b973319f config: Add printer-anet-e16-2019.cfg example config file 
Reported by @dstack.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-11 12:34:58 -04:00
Kevin O'Connor 1460e0d6f4 config: Add printer-sovol-sv01-2020.cfg example config 
Reported by @lalek54.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-29 21:13:11 -04:00
Kevin O'Connor 5c9551dc72 test: Add printer-tronxy-p802m-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-29 20:46:29 -04:00
Kevin O'Connor 8c2b62775d test: Fix commands.test so RESTART is run last 
Commands after a RESTART aren't properly run on a test case, so only
run it last.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-28 22:53:12 -04:00
Kevin O'Connor 43fa41c1af gcode_arcs: Disable E moves in absolute extrude mode 
Commit 402110f6 didn't actually fix absolute extrude mode.  For now,
report an error if an extrude move is requested in absolute extrude
mode.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-23 10:05:05 -04:00
Kevin O'Connor c7d6d81a4d test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-14 22:19:08 -04:00
Kevin O'Connor 931b73d498 test: Add generic-ultimaker-ultimainboard-v2 to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-08 11:28:41 -04:00
Kevin O'Connor d6034013e7 config: Add example printer-alfawise-u30-2018.cfg config 
Reported by @elegos.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-30 21:29:57 -04:00
Kevin O'Connor 336af2f28d stepper: No need to pass stepper_kinematics to set_step_dist() 
Also, no need to log in stepper.py as the update is already logged in
extruder.py.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-28 10:06:02 -04:00
Kevin O'Connor 8f8cf7ef41 config: Add example printer-twotrees-sapphire-pro-2020.cfg config 
Reported by @thucar.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-26 11:53:06 -04:00
Kevin O'Connor cb414ae914 config: Add example generic-mks-robin-nano.cfg config 
Reported by @thucar.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-26 11:53:06 -04:00
Kevin O'Connor a074af7c87 adc_temperature: Add builtin definition for PT1000 sensors 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-05 11:46:01 -05:00
Kevin O'Connor 79ce3ef1c5 test: Add printer-wanhao-duplicator-9-2018.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-13 20:53:30 -05:00
Kevin O'Connor e3dde19932 test: Add generic-bigtreetech-skr-v1.4.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-28 12:16:05 -05:00
mtw3d 2b3ea29f30 config: Add example printer-mtw-create-2015.cfg config file 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-24 09:28:03 -05:00
Kevin O'Connor fe76fbe820 test: Add generic-simulavr.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 23:29:32 -05:00
Kevin O'Connor 6e020123c6 test: Add printer-monoprice-mini-delta-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 23:29:32 -05:00
Kevin O'Connor 8bf3e56301 config: Add example generic-flyboard.cfg config file 
Reported by @DJDOUBLEG.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 19:23:00 -05:00
Kevin O'Connor fc6d045ded config: Add example generic-archim2.cfg config 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:32:52 -05:00
Kevin O'Connor 0160a7db9a config: Add an example generic-mks-sgenl.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:07:34 -05:00
Kevin O'Connor ff0324b0c2 config: Add generic-mightyboard.cfg 
Reported by @fragginright.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 17:49:10 -05:00
Arksine dc51788f9a test: update sample configs and test configs with new bed_mesh options 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor ac863a95b6 rotary_delta: Initial support for rotary delta kinematics 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:52:42 -05:00
Simo Apell 90bc1679a2 extruder_stepper: Initial support for synchronized extruder steppers 
Signed-off-by: Simo Apell <simo.apell@live.fi>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:03:05 -05:00
Kevin O'Connor f3b4173e6b test: Use more descriptive mcu chip names 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 11:28:56 -05:00
Kevin O'Connor 6b6879e6bc test: Add generic-fysetc-s6.cfg to printer config test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 11:28:30 -05:00
Kevin O'Connor ab5540bd34 config: Add printer-anet-a4-2018.cfg config file 
Reported by @Alkarasu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 22:12:58 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
Kevin O'Connor 8b75bddc0f test: Add new delta_calibrate test case 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-05 14:48:52 -05:00
Kevin O'Connor 8e296db410 test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-03 13:34:46 -05:00
Kevin O'Connor 86b074e1ee config: Rename example-multi-mcu.cfg to sample-multi-mcu.cfg 
Rename the sample file to be more similar to the naming of other
files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 0b90337d59 config: Minor updates to printer-lulzbot-mini1-2016.cfg 
Add to printers.test test case.  Don't disable the
max_extrude_cross_section check by default (users should verify they
want that safety feature off).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-05 10:57:47 -05:00
Kevin O'Connor c11e4b74c2 config: Minor updates to printer-creality-cr20-pro-2019.cfg 
Don't specify a default for pressure_advance.  Don't specify values
that are already at their default.  Add to printers.test test case.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-05 10:50:19 -05:00
Kevin O'Connor 739583a21b test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 12:46:03 -04:00
Kevin O'Connor b91993d6a4 config: Add generic-bigtreetech-skr-e3-dip.cfg config 
Reported by @salimvanak.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:59:26 -04:00
Kevin O'Connor ef142af785 config: Rename config to generic-bigtreetech-skr-mini-e3-v1.0.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:04:15 -04:00
Kevin O'Connor 48530db50e test: Add generic-bigtreetech-skr-mini-e3-v1.2.cfg to config tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:01:34 -04:00
Kevin O'Connor 1d7f6e1c13 test: Add initial test case for gcode_arcs support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-13 12:05:15 -04:00
Kevin O'Connor 0f1fcb017f config: Add example generic-bigtreetech-skr-pro.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-05 22:42:48 -04:00
Kevin O'Connor 5e2c60bd67 config: Add example config files for the Fysetc Cheetah boards 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 11:02:44 -04:00
Kevin O'Connor f21f66a31f config: Add example SKR mini-E3 config 
Signed-off-by: Ashley Izat <ashleyi100@googlemail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-29 10:19:05 -04:00
Kevin O'Connor a482ddf582 tmc2209: Add support for sensorless homing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-19 12:05:09 -04:00
Kevin O'Connor 745a8dc0ac config: Add an example config file for the bigtreetech skr mini 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-30 21:42:20 -04:00
Kevin O'Connor a34613cf86 config: Add a simplified Duet2 Eth/Wifi example config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor e2d8a6f02d config: Rename generic-duet2.cfg to generic-duet2-duex.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor 4df78cd843 tmc: Configure "intpol" field from TMCMicrostepHelper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 16:59:26 -04:00
Kevin O'Connor e5f74a64ed polar: Add initial support for multiple bed rotations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 10:00:40 -04:00
Kevin O'Connor cf0a42ed6b test: Fix SET_TMC_FIELD test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-24 08:05:45 -04:00
Stephan Oelze ec9fad758a tmc2209: Initial support for tmc2209 stepper driver 
Signed-off-by: Stephan Oelze <stephan.oelze@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 11:26:20 -04:00
Kevin O'Connor c3467f5b35 config: Add generic-printrboard-g2.cfg config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-21 23:12:31 -04:00
nzlrhyz 631c3fe052 config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg 
Reported by @nzlrhyz.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-18 10:13:41 -04:00
Kevin O'Connor e697fc11af config: Add an example config for the Duet2 Maestro 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-12 22:14:41 -04:00
Kevin O'Connor 64214255da test: Flush moves in quad_gantry_level and z_tilt_adjust tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-12 15:36:32 -04:00