Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

config: Minor updates to printer-creality-ender3-v2-2020.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-08-02 16:22:59 -04:00
parent 6030551075
commit 68e9a495dd
2 changed files with 9 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
config/printer-creality-ender-3-v2-2020.cfg → config/printer-creality-ender3-v2-2020.cfg
View File

@ -1,10 +1,12 @@
# This file contains pin mappings for the stock 2020 Creality
# Ender 3 V2. To use this config, the firmware should be compiled
# for the STM32F103 with a 28KiB bootloader. To use the front USB
# port for communication, select serial port USART1.
# This file contains pin mappings for the stock 2020 Creality Ender 3
# V2. To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and with "Use USB for
# communication" disabled.
# If you prefer a direct serial connection, USART3 is broken out
# on the 10 pin IDC cable used for the LCD module as follows:
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select the
# USART3 serial port, which is broken out on the 10 pin IDC cable used
# for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and

1
test/klippy/printers.test
View File

@ -125,6 +125,7 @@ CONFIG ../../config/generic-fysetc-cheetah-v1.2.cfg
CONFIG ../../config/generic-mks-robin-e3.cfg
CONFIG ../../config/generic-mks-robin-nano.cfg
CONFIG ../../config/printer-alfawise-u30-2018.cfg
CONFIG ../../config/printer-creality-ender3-v2-2020.cfg
CONFIG ../../config/printer-twotrees-sapphire-pro-2020.cfg
# Printers using the stm32f407