klipper-dgus

Commit Graph

Author	SHA1	Message	Date
Kevin O'Connor	686d557863	tmc5160: Change the default for the pwm_freq field to zero The tmc5160 spec shows a default of zero, so use that same default for Klipper. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-05-24 23:58:48 -04:00
Kevin O'Connor	5afa5d3fbb	docs: Fix typo in Contact.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-05-24 15:26:00 -04:00
Kevin O'Connor	f0c394de81	docs: Add stow_on_each_sample description to BL-Touch.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-05-11 12:46:25 -04:00
Kevin O'Connor	eebd7e6579	docs: Update bltouch probe_with_touch_mode documentation Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-05-11 12:46:25 -04:00
Denis Ignatenko	f88117c7e4	docs: Update HallFilamentWidthSensor.md (#2827 ) Signed-off-by: Denis Ignatenko <deniss979@gmail.com>	2020-05-05 17:45:26 -04:00
Dushyant Ahuja	1eb2d4da90	docs: Clarify that Probe_Calibrate uses the speed variable for XY as well (#2735 ) Signed-off-by: Dushyant Ahuja <dusht.ahuja@gmail.com>	2020-05-05 09:03:39 -04:00
Kevin O'Connor	bf6f84b82d	docs: Note that printer.heater got changed to printer.heaters Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-04-26 17:30:57 -04:00
Kevin O'Connor	ee9657bbf6	docs: Note __test menu removed in Config_Changes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-04-18 12:08:57 -04:00
Kevin O'Connor	b2a29c6349	docs: Update BLTouch.md initial tests for users with a regular z endstop Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-04-02 17:34:15 -04:00
Kevin O'Connor	5d0658b91b	docs: Add BLTouch.md section describing clone config options Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-04-02 17:34:15 -04:00
Kevin O'Connor	291fbe0801	docs: Add touch_mode sensor test to BLTouch.md Describe how to test the sensor pin using the BLTouch touch_mode. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-04-02 17:34:15 -04:00
Kevin O'Connor	3c01b60a88	docs: Update FAQ with TMC2208 "standalone" mode workaround Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-29 11:08:49 -04:00
David Smith	d4bf61262e	Extruder: Add g-code to set extruder step_distance (#2598 ) Signed off by: David Smith <davidosmith@gmail.com>	2020-03-28 09:52:46 -04:00
Kevin O'Connor	849cc075dc	docs: Fix typo in MANUAL_STEPPER command line Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-23 15:06:32 -04:00
Jeremy Briffaut	6be552f6e6	Allow manual_stepper to run in parallel than an other stepper Signed-off-by: Jeremy Briffaut <kakou@kakou.org> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-23 14:43:34 -04:00
Kevin O'Connor	0c9eb519ff	docs: Update Manual_Level.md Z_ENDSTOP_CALIBRATE instructions The endstop must not be triggered at the start of Z_ENDSTOP_CALIBRATE. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-22 11:18:31 -04:00
Kevin O'Connor	7543876487	docs: Add info on S3D "extra retract distance" to Slicers.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-22 11:00:02 -04:00
Kevin O'Connor	5e39d346ed	display: Use the active extruder in the default 16x4 screen layout Change the default layout to show the active extruder (not always the first extruder). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-13 21:50:38 -04:00
Garth Snyder	0ba83c5b04	docs: clarify behavior of M204 with only one of P or T (#2564 ) Signed-off-by: Garth Snyder <garth@garthsnyder.com>	2020-03-11 13:03:48 -04:00
Kevin O'Connor	3850b3d27a	docs: Fix date of menu change in Config_Changes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-08 17:42:22 -04:00
Kevin O'Connor	d39c4fe628	menu: Disable support for "deck" and "card" menu items Disable support for customizing the main lcd display content via the menu system. Advise users to use the new display_data config sections as a replacement. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-08 17:38:24 -04:00
Kevin O'Connor	63ba7d231e	docs: Minor updates to Code_Overview.md Minor indentation change. Update for change to stepcompress_append(). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-02 21:54:22 -05:00
Denis Ignatenko	f84542cd20	hall_filament_width_sensor: Added virtual runout sensor (#2535 ) Signed-off-by: Denis Ignatenko deniss979@gmail.com	2020-03-01 22:05:12 -05:00
Kevin O'Connor	26523d77ba	docs: Minor wording change to Endstop_Phase.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-03-01 11:40:13 -05:00
FanDjango	16ecf15a91	bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands (#2540 ) Signed-off-by: Mike Stiemke <fandjango@gmx.de>	2020-02-23 22:32:07 -05:00
Kevin O'Connor	15f21be5ec	manual_stepper: Support ignoring errors on STOP_ON_ENDSTOP Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-02-19 13:38:22 -05:00
Kevin O'Connor	01d985a739	docs: Recommend RPi 2 or later in Installation.md Reported by @patrickkettner. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-02-17 20:49:32 -05:00
test3210-d	9a65a4569b	hall_filament_width_sensor: Add new filament sensor Signed-off-by: Denis Ignatenko <deniss979@gmail.com>	2020-02-14 13:14:34 -05:00
Kevin O'Connor	c3899cefa8	configfile: Add get_status() to export raw config file information Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-02-13 22:04:40 -05:00
Kevin O'Connor	512ad4b3a4	query_endstops: Add get_status() method that reports the last query state Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-02-12 19:32:48 -05:00
David Smith	596f5e3e3a	stepper_enable: Add SET_STEPPER_ENABLE gcode command (#2463 ) Signed-off-by: David Smith <davidosmith@gmail.com>	2020-02-10 22:34:11 -05:00
Kevin O'Connor	c36fe76d69	probe: Add support for configuring lift_speed Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-01-31 15:47:06 -05:00
Kevin O'Connor	2f8ad5e6ac	docs: Update Config_Changes.md with actual bed_mesh merge date Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-01-09 14:17:51 -05:00
Arksine	46d0c6bdfc	docs: Update Config_Changes.md to reflect bed_mesh changes Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2020-01-09 14:14:13 -05:00
Arksine	edae40c36f	docs: Update documentation to reflect bed_mesh changes Also add new bed_mesh.md documentation. Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2020-01-09 14:14:13 -05:00
Kevin O'Connor	3fb0b7e4bc	docs: Update Command_templates.md - numbers in gcode_macro name must be at end Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-01-07 20:58:39 -05:00
Kevin O'Connor	005cfea5c3	gcode: Fix detection of some "extended" g-code commands Fix typo that resulted in _get_extended_params() being called for all commands. Allow "extended" g-code commands to contain numbers. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-01-07 19:17:20 -05:00
David Smith	6972b6303d	docs: Updates for gcode_macro naming (#2317 ) Add note about numbers in macro names. Add note about variable name case restriction. Add set variable example. Signed-off-by: David O Smith <davidosmith@gmail.com>	2020-01-06 10:59:40 -05:00
Kevin O'Connor	baa0d2ff8c	docs: Minor formatting change to Config_checks.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-01-06 10:45:53 -05:00
Kevin O'Connor	5ff45636d9	docs: Minor FAQ updates Fix rendering of Patreon URL in FAQ. Use same "ls" command to find the serial port that Installation.md uses. Note Raspberry Pi 4 is supported. Note problems with ModemManager. Point to Bed_Level.md in Z position_endstop question. Link to Config_checks.md in "Z screaching" FAQ. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2020-01-06 10:45:48 -05:00
Kevin O'Connor	dabffcc22c	kin_extruder: Convert pressure advance to use "weighted average" Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-20 12:21:58 -05:00
Kevin O'Connor	b921b8a1c1	docs: Document support for M204 P and T parameters Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-18 16:34:45 -05:00
Kevin O'Connor	0a86190bae	display: Revert "display: Add ST7567 display support (#1540 )" This reverts commit `1b92af6078`. The standard "uc1701" lcd_type can now be used in place of the custom "st7567" lcd_type. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-18 12:30:20 -05:00
BlackStump	7532e4ccea	scripts: Replicape pru update start scripts (#2277 ) Signed-off-by: Trevor Wilson <altocoey@hotmail.com>	2019-12-18 12:11:40 -05:00
Kevin O'Connor	254789f4c5	neopixel: Add support for delaying updates in SET_LED command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-15 23:24:17 -05:00
Kevin O'Connor	1d05a34cd7	docs: Update Kinematics.md document with "smooth pressure advance" Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-13 17:52:51 -05:00
Kevin O'Connor	91bade5824	docs: Update Config_Changes.md with pointer to sample multi extruder configs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-13 12:33:13 -05:00
Simon Kühling	2721211456	heater: Add PrinterHeater get_status() function Provide a list of available heater and sensor names to gcode macro templates through the printer.heater.available_heaters and printer.heater.available_sensors variables Signed-off-by: Simon Kühling <mail@simonkuehling.de>	2019-12-13 10:45:04 -05:00
Kevin O'Connor	fcee27fc19	gcode: Remove builtin T0/T1/T2/... command support The builtin Tn command is not sufficiently flexible to control some multi-extruder printers. Remove the command and encourage users to define individual gcode_macros for each Tn instance. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-10 14:24:32 -05:00
Kevin O'Connor	c06618193d	extruder: Add an ACTIVATE_EXTRUDER command Add support for an extended g-code command to change the currently active extruder. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-10 14:23:13 -05:00
Kevin O'Connor	ab2d302b7e	gcode: Remove support for the M206 command The M206 command isn't particularly standardized and isn't issued by default from 3rd party software in their standard configurations. Encourage users to use the more powerful SET_GCODE_OFFSET command. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-10 14:23:10 -05:00
Kevin O'Connor	8663bc8192	docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-10 13:51:47 -05:00
Kevin O'Connor	205da598fd	docs: Move upgrade instructions to the last item in the FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-10 13:39:49 -05:00
Kevin O'Connor	10270dc7ef	docs: Fix another typo in Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-04 12:26:45 -05:00
Kevin O'Connor	f82a85aad0	docs: Fix typo in Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-04 12:17:13 -05:00
Kevin O'Connor	e17f2bac96	docs: Minor "coordinate system" wording change to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-04 12:05:31 -05:00
Kevin O'Connor	e557f2d0c0	docs: Add information on coordinate systems to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-04 11:09:22 -05:00
Kevin O'Connor	8e87ab0939	gcode: Remove support for "G4 S1" style commands The S parameter is not a standard and was not commonly used. The P parameter (delay specified in milliseconds) is the commonly accepted g-code mechanism for dwelling. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-02 19:31:20 -05:00
Kevin O'Connor	43bb45a1d3	docs: Minor update to Config_Changes.md Use same "ls /dev/serial/by-id/*" command used in Installation.md. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-01 14:25:40 -05:00
Kevin O'Connor	935088ddff	docs: Clarify recent usb device name change in Config_Changes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-12-01 10:29:15 -05:00
Kevin O'Connor	e80ced5568	usb_cdc: Report MCU type on all boards Always report the "product id" as the MCU type (instead of as "Klipper firmware"). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-26 08:45:20 -05:00
Kevin O'Connor	401f7a879c	atsam: Enable chipid as usb serial number Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-26 08:42:14 -05:00
Kevin O'Connor	d7ec5505a6	atsamd: Enable chipid as usb serial number Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-25 19:30:31 -05:00
Kevin O'Connor	8f6efe5a7b	stm32: Enable chipid as usb serial number Signed-off-by: Matt Baker <baker.matt.j@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-25 19:30:31 -05:00
Kevin O'Connor	0b0e5a911e	docs: Minor wording change in Pressure_Advance.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-25 11:48:41 -05:00
Kevin O'Connor	3aad25eab9	docs: Recommend normal slicer settings in Pressure_Advance.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-25 11:35:39 -05:00
Kevin O'Connor	3683273936	toolhead: Report which axes are homed via get_status() Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-24 20:21:13 -05:00
Kevin O'Connor	282af0220e	toolhead: Report the current extruder from the get_status() method Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-24 20:21:13 -05:00
Kevin O'Connor	982567a69a	config: Rename avrsim.cfg to generic-simulavr.cfg Rename the file to be more similar to the naming of other files. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-24 20:21:13 -05:00
Kevin O'Connor	c188aa982f	docs: Kinematics.md updates for extruder instantaneous corner velocity As of commit `5f5896ad` Klipper will perform look-ahead between moves even if they have significant differences in extruder flow rates. Update Kinematics.md accordingly. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-22 17:04:14 -05:00
Kevin O'Connor	6d0c55b6c1	extruder: Initial support for "smoothed pressure advance" Support averaging the extruder position over a time range to "smooth out" the velocity changes that occur during pressure advance. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-21 13:18:19 -05:00
Kevin O'Connor	430b8d0e52	usb_cdc: Report the MCU name instead of "Klipper firmware" Change the "product id" from the redundant "Klipper firmware" to the CONFIG_MCU value. For now, only make this change on boards that have CONFIG_HAVE_CHIPID set. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-21 11:56:31 -05:00
Kevin O'Connor	9055e9f9b5	docs: Update SAMD51 benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-18 12:49:05 -05:00
Kevin O'Connor	224574da4a	stepper: Add get/set_tag_position() and convert calc_position() Rename calc_position() to calc_tag_position() and have it calculate the value of the position from the last stepper set_tag_position() call. This enables the calc_tag_position() code to be more flexible as it can be run with arbitrary positions. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-13 19:00:17 -05:00
Kevin O'Connor	0bf4ab66da	docs: Add get_status() to list of kinematics methods in Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-12 22:47:10 -05:00
Kevin O'Connor	6116a5d48f	stepper_enable: Remove ability to use a list of pins in enable_pin Now that the tmc drivers perform automatic soft stepper enabling, there is no need to be able to list multiple pins in the enable_pin config setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-12 18:45:31 -05:00
Kevin O'Connor	77dff35fae	tmc: Remove virtual_enable support and replace with automatic support Automatically detect if the stepper has a dedicated enable line. If it does not, then automatically enable virtual enable support. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-12 18:45:31 -05:00
Kevin O'Connor	bfb34e0701	stepper_enable: Move motor_off() logic to stepper_enable.py Directly disable all the stepper motors on a global motor_off() from the StepperEnable() class in stepper_enable.py. This simplifies the toolhead and kinematic classes. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-12 17:32:18 -05:00
Kevin O'Connor	0bfb655f66	query_adc: Add a new module to help query and debug analog pins Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-07 19:28:27 -05:00
Kevin O'Connor	3665e9fc53	docs: Recommend safe_z_home over homing_override Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to recommend using a safe_z_home config section over a homing_override config section. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-07 16:50:52 -05:00
Kevin O'Connor	ed610a6600	extruder: Consistently use "extruder" for the primary extruder No longer allow the primary extruder to be named "extruder0". This avoids internal and external confusion between the printer objects and config section names. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-07 16:28:47 -05:00
Kevin O'Connor	29b5961d9f	docs: Note gcode_arcs and firmware_retraction commands in G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-07 15:44:25 -05:00
Kevin O'Connor	72735b4552	docs: Update Code_Overview.md with new trapq system Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-07 10:42:12 -05:00
Kevin O'Connor	3f338c08c1	docs: Minor micro-controller updates to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-11-07 10:08:21 -05:00
Kevin O'Connor	e2f5e2871c	docs: Recommend OctoPrint v1.3.12 in Installation.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-30 11:02:03 -04:00
Kevin O'Connor	d65f2e2861	docs: Minor cleanup to square_tower.scad Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-27 12:16:17 -04:00
Kevin O'Connor	632ff9e55a	docs: Update benchmarks for stm32f0 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-23 21:45:07 -04:00
Kevin O'Connor	f160a3a824	docs: Reword Pressure_Advance.md paragraph on kinematic impact Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-23 19:50:51 -04:00
Kevin O'Connor	ccbdb6c531	docs: Pressure_Advance.md should recommend setting ADVANCE_LOOKAHEAD_TIME Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-23 19:34:59 -04:00
Kevin O'Connor	c794e11c67	docs: Update Pressure_Advance.md to use tuning tower Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-23 19:28:03 -04:00
Kevin O'Connor	b8a6160646	docs: Update example openocd config in Bootloaders.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-23 19:05:04 -04:00
Kevin O'Connor	f07292084b	docs: Remove outdated stm32f1.md document The stm32f103 has become popular in the "skr mini" series of boards. As a result, the stm32f1.md document is no longer relevant. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-23 18:53:11 -04:00
Kevin O'Connor	abdfd92e99	docs: Update release notes for v0.8.0 release Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-21 22:30:04 -04:00
Kevin O'Connor	dd9259aaf3	docs: Minor wording changes to Manual_level.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-16 16:48:50 -04:00
Kevin O'Connor	4811b58b39	docs: Update Manual_Level.md with recent config changes The sample count and associated settings are no longer in the screws_tilt_adjust config section - they are now in the probe config section. Remove them from the guide. Reported by @theopensourcerer. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-16 16:35:32 -04:00
Kevin O'Connor	dd77b46de9	docs: Note AD849x support in Features.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-15 13:08:43 -04:00
Kevin O'Connor	4ef0db5087	docs: Update Config_Change.md with safe_z_homing change Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-03 18:09:01 -04:00
Nils Schulte	27717440aa	docs: Update Sensorless_Homing.md with new TMCs (#1958 ) Signed-off-by: Nils Schulte <git@nilsschulte.de>	2019-10-03 17:56:40 -04:00
Kevin O'Connor	698159921f	tuning_tower: Tool for tuning parameters based on print Z height This adds a testing tool that can run a command on each Z layer of a print. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-01 14:46:24 -04:00
Kevin O'Connor	1b8a007969	docs: Add a square_tower.scad and stl print object Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-10-01 14:46:24 -04:00
Julien Lirochon	0c247e55e6	probe: Add range to probe accuracy results (#2015 ) Signed-off-by: Julien Lirochon <julien@lirochon.net>	2019-09-29 16:56:46 -04:00
Master92	3a37d4a208	safe_z_home: Hop only if necessary and add option to move xy back Once a hop is performed, it will only be re-issued if the z-axis has been moved in the meantime. Usually it is only moved by a z-homing so doing so will cause safe_z_home to do the hop on the next homing action. When z-axis is homed, x and y positions are known. When setting this boolean option, these are set back to their last positions. Whenever a hop is specified it is re-issued after the Z axis has been homed. This is especially necessary when a pressure-based probe is used. Also, the module decides if a hop is necessary, based on either a known Z position or a flag that is set whenever the motors are disabled. Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>	2019-09-18 09:37:33 -04:00
Kevin O'Connor	a78329d0b2	docs: Add additional "no delay" benchmarks to Benchmarks.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-08 10:37:25 -04:00
Kevin O'Connor	3a2d71038f	docs: Update stm32f103 benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-08 09:27:37 -04:00
Kevin O'Connor	7580fa2354	docs: Update sam4s8c benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-08 09:13:51 -04:00
Kevin O'Connor	8211415231	docs: Update sam4s8c step benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-08 01:12:11 -04:00
Kevin O'Connor	d90116ef39	docs: Use tables for tick rates in Benchmarks.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-08 00:48:01 -04:00
Kevin O'Connor	a344f6d2ad	docs: Update AVR benchmarks to use gcc v5.4.0 Current versions of OctoPi ship with avr-gcc v5.4.0, so update the benchmarks to use that version. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-06 13:24:20 -04:00
Kevin O'Connor	f8b25a0104	docs: Update USB transfer benchmarks It appears that the faster micro-controllers may have their transfer speeds limited by the host USB controller. Rerun the usb transfer benchmarks using a high-speed hub. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-06 13:07:08 -04:00
Kevin O'Connor	01d2183f59	docs: Add STM32F407 benchmarks to Features.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-09-05 22:42:48 -04:00
Kevin O'Connor	f00c50a893	docs: Add stm32f407 benchmarks to Benchmarks.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-31 20:51:26 -04:00
Kevin O'Connor	7598660542	docs: Sort transfer rate benchmark by rate Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-17 13:55:21 -04:00
Kevin O'Connor	d3bd4f9622	docs: Update benchmarks with stm32f446 usb test Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-15 22:27:58 -04:00
Kevin O'Connor	43ab8e7113	docs: Fix typo in Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-09 00:13:34 -04:00
Kevin O'Connor	4c09d8bf02	dotstar: Initial support for "dotstar" LEDs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-06 19:44:32 -04:00
Kevin O'Connor	30bd7c0e47	docs: Update stm32f1.md document Several restrictions documented in the stm32f1.md no longer apply. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-05 11:40:05 -04:00
Kevin O'Connor	485164b8b3	docs: Update MCU_Commands with schedule_soft_pwm_out changes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-08-01 00:23:09 -04:00
Kevin O'Connor	7d4c475e52	docs: Update Features.md to note Duet2 Maestro support Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-28 11:21:38 -04:00
Kevin O'Connor	a878831d5e	mcp4728: Update to better match printrbot revf requirements Reported by @Grumps49. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-26 11:02:56 -04:00
Kevin O'Connor	658088b753	docs: Add initial STM32F446 benchmark results Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-25 18:18:42 -04:00
Kevin O'Connor	46041f5411	neopixel: Add support for daisy-chained chips Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-23 21:59:38 -04:00
Kevin O'Connor	197030c684	docs: Update FAQ to reference Bootloaders.md on "make flash" failure Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-22 10:07:34 -04:00
Kevin O'Connor	b7bc96c3b2	neopixel: Add initial support for "neopixel" leds Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-12 21:44:01 -04:00
Kevin O'Connor	28aa2f507a	endstop: Rename mcu end_stop commands to endstop Rename the commands. The main reason for this change is to force a micro-controller code updated (due to important bugfix in `7fefe52d`). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-12 08:10:53 -04:00
Kevin O'Connor	0343d0c73a	firmware_retract: Remove z_hop support The current z_hop support did not work correctly with common slicers that change Z height between retract and unretract, and it did not work correctly with slicers that issue a retract at the end of a print and then at the beginning of the next print. The z_hop support is therefore being removed until these issues can be fixed. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-10 19:25:56 -04:00
Kevin O'Connor	364c22fe84	probe: Rework the PROBE_ACCURACY command parameters Don't default to a Z location of 10, as that could cause damage if the probe's z_offset is greater than 10. Instead, use the "retract distance" method that is used for normal multi-sample probing. Update the PROBE_ACCURACY command parameter names to use the same parameter names as the PROBE command. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-10 15:21:09 -04:00
Arksine	d4d8bf795b	filament_switch_sensor: add SET_FILAMENT_SENSOR gcode Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-07-10 09:57:46 -04:00
Kevin O'Connor	ea6f30bd99	docs: Update Protocol.md to use enumerations for pins Now that pins use enumerations, update the set_digital_out command examples. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-09 14:17:28 -04:00
Kevin O'Connor	e7dd313a96	docs: Add information on using OpenOCD to Bootloaders.md Add information on using OpenOCD. Add information on flashing the SAMD21 and SAMD51 with OpenOCD. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-07-09 13:37:17 -04:00
Arksine	e19a41d0dd	docs: Add documentation for [delayed_gcode] Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-07-01 11:09:30 -04:00
Arksine	57eb0e8975	docs: Update for latest changs to skew_correction Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-06-29 10:58:46 -04:00
Arksine	3a3dfd51b9	docs: Add CLEAR_PAUSE to G-Codes.md Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-06-28 12:44:49 -04:00
Kevin O'Connor	d9d94c858a	docs: Add skew_correction.md to Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-27 09:50:17 -04:00
Arksine	a3b4543c97	skew_correction: add documentation Signed-Off-By: Eric Callahan <arksine.code@gmail.com>	2019-06-26 20:16:35 -04:00
Kevin O'Connor	d9bddc35a1	docs: Add information on running the regression suite locally Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-23 17:59:23 -04:00
Kevin O'Connor	a2c7fd369c	docs: Note tmc2209 and tmc5160 support in Features.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-23 12:28:39 -04:00
Kevin O'Connor	ba27e0aa02	docs: Warn against using "PreloadVE" on KISSlicer Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-23 12:18:24 -04:00
Kevin O'Connor	83e6c01ada	probe: Allow probe parameters to be specified as g-code parameters Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE, SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE command (and to commands that indirectly invoke a probe). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-21 14:44:28 -04:00
Kevin O'Connor	8cce3cc8e7	graphstats: Add support for interactive graphs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-19 21:12:26 -04:00
Kevin O'Connor	8b00580884	gcode_macro: Parse variable_X parameters using ast.literal_eval() Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-07 19:33:31 -04:00
Kevin O'Connor	a541c2f60e	docs: Update Config_Changes.md with "samples" move to probe config section Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-06 10:15:47 -04:00
Kevin O'Connor	97adca18c4	docs: Update Delta_Calibrate.md with probe location bias info Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-06 10:08:58 -04:00
Kevin O'Connor	e061029b3a	docs: Update Probe_Calibrate.md with information on common probe errors Add a section describing PROBE_ACCURACY, describing probe location bias, and describing probe temperature bias. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-06 10:08:58 -04:00
Len Trigg	5989f7a8a6	firmware_retraction: Implementation of tuneable G10/G11 firmware retraction (#1617 ) This supports getting and setting of retraction parameters without having to restart klippy. Signed-off-by: Len Trigg <lenbok@gmail.com>	2019-06-06 09:10:09 -04:00
Kevin O'Connor	3f96c0abd8	docs: Minor wording change to Command_Templates.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-04 10:39:43 -04:00
Kevin O'Connor	962c48ecf7	docs: Fix github pages "liquid" rendering of Command_Templates.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-04 10:31:03 -04:00
Kevin O'Connor	94c1ad7241	docs: Add an initial Command_Templates.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-04 09:50:30 -04:00
Kevin O'Connor	a68f577adf	gcode_macro: Add support for SET_GCODE_VARIABLE command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-04 09:50:30 -04:00
Kevin O'Connor	ac8f6dfe20	gcode_macro: Rename "status" helper to "printer" Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-06-04 09:50:30 -04:00
Arksine	a238ec6f98	idle_timeout: Add SET_IDLE_TIMEOUT gcode Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-06-04 09:46:26 -04:00
Kevin O'Connor	c54b8da530	gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands Add commands to save and restore the current g-code state. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-31 10:23:56 -04:00
Kevin O'Connor	d6b69938ab	gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command The SET_GCODE_OFFSET command could cause unwanted behavior when an offset is applied to the following g-code command. (In particular, when the following command is an extrude only move - as in issue #1289.) Don't apply the offset immediately. Instead, add support for a MOVE=1 parameter which will schedule a move to apply the given offset. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-26 11:19:15 -04:00
Kevin O'Connor	500f37821d	docs: Improve bltouch v3 documentation Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-26 11:09:32 -04:00
Kevin O'Connor	c77285287b	docs: Try to be more clear that the "paper test" steps need to be run Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-24 22:44:00 -04:00
Kevin O'Connor	6c4c26c319	docs: Minor wording change to Bed_Level.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-23 19:31:44 -04:00
Kevin O'Connor	1856f95503	docs: Recommend OctoPrint 1.3.11 or later Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-20 23:01:04 -04:00
Kevin O'Connor	ad12ffa981	docs: Use markdown syntax for http links in Bootloaders.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-20 17:19:33 -04:00
Kevin O'Connor	fd1dff3f02	docs: Fix numbering in FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-08 16:48:14 -04:00
Kevin O'Connor	73fd292637	docs: Update "avr restart=command" FAQ to point to bootloaders.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-05-07 23:02:20 -04:00
Kevin O'Connor	8524602b6e	docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 23:10:32 -04:00
Kevin O'Connor	17dd6e5097	docs: Fix markdown table layout in html rendering Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 22:56:56 -04:00
Kevin O'Connor	b5f79d5e77	docs: Simplify main html page now that there is a logo Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 22:37:56 -04:00
Kevin O'Connor	57cf0759c0	docs: Add logos to web page Also, move docs/index.md to docs/_layouts/home.html. Add a docs/_layouts/README file. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 22:35:35 -04:00
Kevin O'Connor	85c01d4b6a	docs: Minor node changes to klipper logo Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 11:42:40 -04:00
Kevin O'Connor	49b18a6be7	docs: Update logo so that edges overlap Overlapping edges reduce the effects of anti-aliasing. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 11:31:29 -04:00
Kevin O'Connor	9b960e63fb	docs: Add a Klipper logo Signed-off-by: Jonne Kuusela <johnedwa@gmail.com> Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com> Signed-off-by: Thomas Herrmann <therrmann23@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-18 11:31:29 -04:00
Kevin O'Connor	6f34ba59cb	docs: Add an index page for the www.klipper3d.org website Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-16 22:00:35 -04:00
Kevin O'Connor	4739e28137	docs: Add a github pages html template Add an html template so that each page has a navbar at the top and a sidebar on the left with an auto-generated table of contents. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-16 20:55:41 -04:00
Kevin O'Connor	64e7235e48	docs: Rewrite the Overview.md - just list documents by category Replace the Overview.md document description with a list of documents and a brief description of their contents. The goal is to make it easier for users to find information. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-16 20:45:00 -04:00
Kevin O'Connor	cb04e4c45d	docs: Fix alignment of tmc2208.svg Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-16 11:34:45 -04:00
Kevin O'Connor	c440c6b7aa	docs: Start of google pages _config.yml file Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-15 11:04:23 -04:00
Kevin O'Connor	e3df39245f	docs: Fixup github pages Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-14 22:41:23 -04:00
KevinOConnor	8a6d415745	Update CNAME	2019-04-14 21:25:54 -04:00
KevinOConnor	b90a04a5cf	Create CNAME	2019-04-14 21:21:14 -04:00
KevinOConnor	63f8d8cc79	Set theme jekyll-theme-leap-day	2019-04-14 21:17:52 -04:00
Kevin O'Connor	8bc9f39c58	docs: Avoid using .. in markdown links Using .. in the markdown link can confuse some document processors. Use an absolute link to github instead. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-14 21:12:21 -04:00
Kevin O'Connor	04adde9a02	docs: Update Installation.md to point to list of supported ARM mcus Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-06 18:47:02 -04:00
Kevin O'Connor	de124677b0	docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-05 18:22:57 -04:00
Kevin O'Connor	9f9262cba8	docs: Minor wording changes to BLTouch.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-05 18:20:21 -04:00
Kevin O'Connor	54a2c5d58e	BLTouch: Use G90 in the BLTouch.md homing_override example Reported by @sgtnoodle. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-05 17:49:58 -04:00
Kevin O'Connor	a5a6ae83ff	docs: Wrap BLTouch.md to 80 columns. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-05 17:48:51 -04:00
Kevin O'Connor	6318bdc99b	docs: Note the python software dependency update in Config_Changes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-05 11:20:36 -04:00
Kevin O'Connor	0615ab5f89	docs: Note the use of bus enumerations in Config_Changes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-04 18:30:04 -04:00
Kevin O'Connor	be6b29fabf	sx1509: Convert code to use generic i2c bus support Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-04 18:29:30 -04:00
Kevin O'Connor	9bd3e80421	docs: Note that graphstats.py can produce different types of graphs Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-01 22:24:45 -04:00
Kevin O'Connor	2980c2e12c	docs: Minor wording change in MCU_Commands.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-01 22:04:56 -04:00
Kevin O'Connor	c30a6f2e6b	docs: Update Protocol documentation with enumerations Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-04-01 21:41:33 -04:00
Eugene Krashtan	b35e07ca2b	docs: STM32F0 benchmarks (#1462 ) Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>	2019-03-29 09:38:54 -04:00
Douglas Hammond	c105adc80b	temperature_fan: Fix. Temperature fan min speed should be used (#1405 ) Signed-off-by: Douglas Hammond <wizhippo@gmail.com>	2019-03-28 14:07:40 -04:00
Eugene Krashtan	c7330e07a4	stm32f0: Various fixes according to comment: (#1453 ) * Copyright in log.c * GPIO check completely removed * generic/timer_irq added * Change in doc section Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>	2019-03-28 10:21:51 -04:00
Kevin O'Connor	312cabc3f7	docs: Move benchmark information from Debugging.md to new Benchmarks.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-28 09:52:06 -04:00
Kevin O'Connor	de7444ca69	docs: Remove spurious executable flag from documents Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-24 12:17:12 -04:00
Eugene Krashtan	b79db3e3d6	docs: Documentation draft for STM32F0 Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>	2019-03-24 12:10:11 -04:00
Kevin O'Connor	9aadc3c7fa	docs: Also note that driver_VSENSE was removed from tmc2660 driver Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-22 22:40:42 -04:00
Kevin O'Connor	efab177645	docs: Note tmc2660 driver_HEND default change from 6 to 3 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-22 20:41:32 -04:00
amblidex	0980b7e4ec	tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419 ) Signed-off-by: Frank Kang <amblidex@outlook.com>	2019-03-22 20:37:03 -04:00
Frank Kang	06c0463d44	Update sensorless homing documentation to disable second home Signed-off-by: Frank Kang <amblidex@outlook.com>	2019-03-19 10:55:59 -04:00
Kevin O'Connor	b28e95ca1a	command: Always pass a string to the DECL_CONSTANT() macro Make it clear that the name of the constant being defined is a string. When the value being defined is also a string, use a new DECL_CONSTANT_STR() macro. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-17 19:38:18 -04:00
Kevin O'Connor	12f6513ba2	docs: Recommend OctoPi v0.16.0 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-11 22:13:04 -04:00
Kevin O'Connor	96c4e1c5a0	docs: Update atsam usb transfer benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-10 21:59:18 -04:00
Kevin O'Connor	d3f6dad853	controller_fan: Allow multiple controller_fan sections to be defined It may be necessary to define multiple fans, so allow each config section to be named. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-10 13:57:01 -04:00
Rui Caridade	5c0a2479be	screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367 ) Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>	2019-03-08 11:47:17 -05:00
Kevin O'Connor	563bc37073	tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL Use the field names from the trinamic specification. This makes the field similar to all the other driver_XXX config options. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-08 11:25:19 -05:00
Kevin O'Connor	89935c6831	docs: Update Config_Changes.md with tmc2660 changes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-08 11:08:24 -05:00
Florian Heilmann	789379e95b	tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>	2019-03-08 11:04:14 -05:00
Kevin O'Connor	d62a41b930	manual_stepper: Add support for moves with acceleration Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-03 13:38:10 -05:00
Arksine	69491e2dab	filament_switch_sensor: update documentation Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-03-01 00:45:51 -05:00
Kevin O'Connor	c8d7e28a35	atsamd: Add support for programming SERCOM pins Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-01 00:40:44 -05:00
Kevin O'Connor	c039b33f2a	tmc2130: Add support for INIT_TMC command Signed-off-by: Frank Kang <amblidex@outlook.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-03-01 00:24:39 -05:00
Kevin O'Connor	b40a04fb8d	docs: Update Installation document to emphasize the "stay connected" step Move the OctoPrint "stay connected" during error configuration step to its own paragraph. Hopefully this will make it less likely that users skip this step. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-27 20:03:44 -05:00
Kevin O'Connor	88ebedcc63	docs: Update Installation document to suggest using /dev/serial/by-id/ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-27 19:58:09 -05:00
Arksine	f7d8854587	bed_mesh: simplify configuration The 'bed_shape' option has been removed. The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'. When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'. Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-02-25 13:34:14 -05:00
Kevin O'Connor	31987c7bcd	docs: Add a Manual_Probe.md document Add information on calibrating the bed on traditional printers with a Z endstop and bed screws. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-24 00:49:47 -05:00
Kevin O'Connor	80c8bd8b4d	bed_screws: Add a helper tool for leveling bed screws Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-24 00:49:47 -05:00
Kevin O'Connor	328bd89fc1	docs: Warn against using the TMC2208 in standalone mode Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-20 16:22:06 -05:00
Rui Caridade	276d5a1436	probe: Add PROBE_ACCURACY command Implementation of "PROBE_ACCURACY" to measure the maximum, minimum, average and standard deviation of a probe. Signed-off-by: Rui Caridade <rui.mcbc@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-18 00:36:28 -05:00
christian mock	82efed5e2a	docs: added an answer to the FAQ about detecting lost steps (#1265 ) Signed-off-by: christian mock <cm@tahina.priv.at>	2019-02-17 22:35:58 -05:00
Kevin O'Connor	cc4ecef88b	mcp4018: Add initial support for the mcp4018 digipot Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-16 08:16:37 -05:00
nopbit	0f674ef407	tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132 ) Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg. Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>	2019-02-14 10:13:48 -05:00
KevinOConnor	c6d1d1bd8c	Merge pull request #1242 from john--/pr_generic_heater Generic Heater Support	2019-02-14 10:08:26 -05:00
Kevin O'Connor	dd303ec4a9	docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-13 23:20:34 -05:00
John Jardine	6316b2c1b6	Generic Heater Support Adds the ability to register a custom/generic heater through a new extra called heater_generic. This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax: SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp> Signed-off-by: John Jardine <john@gprime.net>	2019-02-14 01:15:11 +00:00
Kevin O'Connor	5aa4fd2b4a	docs: Note MCP4728 in Features.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-12 18:39:12 -05:00
Kevin O'Connor	2d7c3a84ee	manual_stepper: Add an "extras" module for manually controlling a stepper Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-12 13:38:13 -05:00
Kevin O'Connor	57e6acbc5c	docs: Add Bed_Level.md and Probe_Calibrate.md documents Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-12 13:20:32 -05:00
Kevin O'Connor	b0b9fc6f4a	probe: Use manual_probe helper when performing manual probes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-12 13:20:32 -05:00
Kevin O'Connor	35ea4a137d	probe: Add PROBE_CALIBRATE command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-12 13:20:32 -05:00
Kevin O'Connor	d14a53e160	manual_probe: Add a helper script for performing manual Z probing Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-12 13:20:32 -05:00
Kevin O'Connor	805e56008f	docs: Note command dispatch benchmark needs desktop class machine Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-11 16:35:03 -05:00
Kevin O'Connor	5ab6bcd1d7	docs: Report the actual SAMD51 3 stepper rate in the Features benchmark Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-11 12:57:44 -05:00
Florian Heilmann	607461f7b6	docs: Update duet2 benchmarks Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>	2019-02-10 17:59:40 -05:00
Kevin O'Connor	faedc77621	docs: Fix typo in Protocol.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-10 11:53:56 -05:00
Kevin O'Connor	32e0d4d3ac	docs: Update atsam benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-07 13:24:03 -05:00
Kevin O'Connor	1f9208dc66	docs: Update benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-06 22:08:39 -05:00
Kevin O'Connor	5b9ce328e5	docs: Clarify FAQ item on running multiple instances of klippy Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-02-03 17:41:57 -05:00
Kevin O'Connor	c3e889a67c	docs: Add performance results for SAMD51 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-28 20:05:50 -05:00
Arksine	893cbbab83	pause_resume: update documentation Add updates to example-extras.cfg and G-Codes.md documenting pause_resume. Also add M600 (filament change) to sample-macros.cfg. Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2019-01-28 11:23:52 -05:00
Kevin O'Connor	90827a88de	docs: Minor wording change to step_distance FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-27 16:52:16 -05:00
Kevin O'Connor	71ef715a88	docs: Expand FAQ on why step_distance is used Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-27 11:29:42 -05:00
Kevin O'Connor	b6ccd2682c	Kconfig: Move SERIAL_BAUD to src/Kconfig and show with LOW_LEVEL_OPTIONS Move the definition of SERIAL_BAUD to the main src/Kconfig file. Only show this as an option if the user selects the ability to configure low-level options. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-25 18:02:03 -05:00
fredizzimo	15afcf69fe	docs: Improve the BLTouch documentation (#1107 ) Signed-off-by Fred Sundvik <fsundvik@gmail.com>	2019-01-25 12:53:00 -05:00
Kevin O'Connor	76138fde5c	docs: Add a FAQ item for "Do I have to use OctoPrint?" Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-21 12:01:24 -05:00
Kevin O'Connor	8c5a94f49f	docs: Sort command dispatch table by transfer rate Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-20 14:17:08 -05:00
Kevin O'Connor	f0ac5c378f	docs: Update Debugging document with SAM3X8E usb transfer benchmark Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-20 00:57:48 -05:00
Kevin O'Connor	33f5b5f285	docs: Update Code_Overview.md with removal of printer_state() callback Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-08 11:34:09 -05:00
Kevin O'Connor	e26d1a3567	i2ccmds: Pass the i2c address as a 7-bit number (0-127) The sam3 i2c code and the linux code use a 7-bit i2c address, while the avr, lpc176x, and samd21 i2c code uses an 8-bit address with the least significant bit always zero. A similar issue occurred in the host code (sx1509.py and replicape.py use 7-bit addresses while uc1701.py and mcp4451.py use 8-bit addresses). Consistently use 7-bit addresses in all the code. This breaks compatibility between host and mcu software, so make a change to the config_i2c command to force users to synchronize software updates. This also breaks common Smoothieboard configs, so update the mcp4451 code to validate the i2c_address. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-07 20:00:44 -05:00
Kevin O'Connor	f2f54290e8	docs: Add a new Config_Changes.md document Add a document to track non-backwards compatible changes to the printer config file. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-07 20:00:44 -05:00
Kevin O'Connor	549e682069	docs: Add sam4s8c benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-07 19:43:56 -05:00
Kevin O'Connor	70bbdf9334	sam3: Rename src/sam3x8e to src/sam3 This is in preparation for merging sam3 and sam4 code into one directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-07 19:33:26 -05:00
Kevin O'Connor	c8e04274ad	docs: Add a FAQ item for "multiple instances of klipper on the same machine" Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-07 13:59:52 -05:00
Yannic Schröder	d015209388	docs: Add guide for sensorless homing (#1004 ) Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>	2019-01-07 10:39:16 -05:00
Kevin O'Connor	28e68075c8	docs: Suggest checking for bad wires in "lost communications" faq entry Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-07 10:28:25 -05:00
Kevin O'Connor	186d815469	docs: Documentation/FAQ, Raspii voltage Add note that `under power` may be related to communication issues. Signed-off-by: Wilfried Goesgens <dothebart@citadel.org> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2019-01-05 20:59:12 -05:00
Wilfried Goesgens	df42887193	docs: Bltouch documentation (#1073 ) Add documentation on howto configure the BL-Touch device with Klipper. A second paragraph addresses possible issues with BL-Touches Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>	2019-01-05 20:24:35 -05:00
Alec B. Plumb	59e9b6562f	respond: An extra for sending messages to the printer host. (#1053 ) I have made one change to `gcode.py` to support quoted parameter values. I have added support for the basic `M118` command (see https://reprap.org/wiki/G-code#M118:_Echo_message_on_host). I have also added a `RESPOND` command that takes extended parameters. `ECHO` might be a better name than `RESPOND` but is already defined in `gcode.py`. Signed-off-by: Alec B. Plumb <alec@etherwalker.com>	2019-01-02 17:45:35 -05:00
Kevin O'Connor	d7b0a7e961	docs: Add a FAQ item on how to cancel a "wait for temperature" request Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-12-20 16:25:58 -05:00
Kevin O'Connor	566488dc01	docs: Add a FAQ item on Raspberry Pi reboots Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-12-20 16:25:58 -05:00
Kevin O'Connor	e4dac1039d	docs: Update release notes for v0.7.0 release Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-12-20 09:15:24 -05:00
Kevin O'Connor	e0b2d7c51d	bltouch: Add a BLTOUCH_DEBUG command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-12-03 22:52:32 -05:00
Kevin O'Connor	e505ab0df1	samd21: Add support for flashing an application via the bossac tool Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-30 22:22:42 -05:00
Kevin O'Connor	bb41765714	docs: Minor update to Code_Overview.md with further kinematics info Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-17 14:56:46 -05:00
Kevin O'Connor	cd1e669306	docs: Fix typo in command dispatch benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-16 20:38:30 -05:00
Kevin O'Connor	64a1837fec	docs: Round pru command parsing benchmark Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-16 20:31:41 -05:00
Kevin O'Connor	c349863988	docs: Add information on command parsing benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-16 20:21:05 -05:00
Kevin O'Connor	52fa91fb9a	docs: Update benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-16 18:59:55 -05:00
Kevin O'Connor	f973886dac	docs: Minor rewording in Endstop_Phase.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-14 09:46:21 -05:00
Jiri Dobry	e541466591	servo: This patch create ability to enable/disable attached servo. (#880 ) Cheap mechanical servos have small flickering. When this servo stay on one position, this flickering slowly destroy internal potentiometer and make servo unusable. Many mechanisms need servo only to change position. Therefore I create this minor path to enable/disable servo. It stop pulses for this servo, that's all. Corresponding G-code is: SET_SERVO SERVO=config_name [WIDTH=] [ENABLE=<0\|1>] SET_SERVO SERVO=config_name [ANGLE=] [ENABLE=<0\|1>] For example: SET_SERVO SERVO=touch ANGLE=80 ENABLE=1 ; enable servo and set position G4 P200 ; wait 200ms SET_SERVO SERVO=touch ENABLE=0 ; disable servo This patch add one option to servo configuration: enable: <False/True> # default True It not have impact to user code existing already because it is optional parameter and default value is same as original behavior. Signed-off-by: Jiri Dobry <jdobry@centrum.cz>	2018-11-14 09:38:09 -05:00
Kevin O'Connor	31730fa031	docs: Minor wording change to Endstop_Phase.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-13 18:44:33 -05:00
Kevin O'Connor	c55842b428	docs: Note when endstop phases are useful in Endstop_Phase.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-13 18:36:00 -05:00
Kevin O'Connor	8d4f7db66e	docs: Fix typo in Bootloaders.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-13 14:41:51 -05:00
Kevin O'Connor	097e6c524b	docs: Fix link in FAQ document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-13 14:40:35 -05:00
Kevin O'Connor	5f9ce32fae	docs: Be more clear that a baud of 250000 is recommended Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-11-13 14:06:27 -05:00
Kevin O'Connor	c4058f71fb	docs: Clarify M109/M190 in G-Code documentation Signed-off-by: Lucas Fink <software@lfcode.ca> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-28 14:22:30 -04:00
Kevin O'Connor	057acb07b7	docs: Add a Slicers.md document Add some information on configuring a slicer for use with Klipper. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-28 10:47:32 -04:00
Kevin O'Connor	47e45ab391	docs: Note the use of gcode_macro in G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-28 10:38:03 -04:00
lf	a33792f07e	util: Fix versioning when gitdir is absent (#809 ) The gitdir previously could be absent and produce a version of "" in spite of checks for it. Fixed. Parent directories with shlex-interpreted characters in their names could be misinterpreted. Removed shlex parsing. Packagers may want to remove the git history to slim down the package size, so add an option for using a file 'version' in the klippy directory to set version without using git. Signed-Off-By: Lucas Fink <software@lfcode.ca>	2018-10-27 10:44:38 -04:00
Kevin O'Connor	a7c8476e98	docs: Update pressure advance doc to note it only impacts the extruder Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-25 19:09:47 -04:00
Kevin O'Connor	3d7e8fa5ec	docs: Note impact of warping during pressure advance tuning Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-25 12:10:47 -04:00
Kevin O'Connor	ca7dd8bfd4	docs: Update Pressure_Advance.md - don't set square_corner_velocity=0 Setting the square corner velocity to zero would cause stuttering during the test if a bed mesh is in effect. It's possible to get the desired effect by reducing the square corner velocity and setting the pressure advance lookahead time instead. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-25 11:43:03 -04:00
Florian Heilmann	b6bf455155	tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816 ) Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>	2018-10-24 16:01:12 -04:00
Kevin O'Connor	04a12ec9bd	docs: Update stm32f1.md - usb is now supported. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-22 13:22:58 -04:00
Kevin O'Connor	e4bb90a1ca	bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-22 11:26:01 -04:00
Kevin O'Connor	925562cfb1	delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-22 11:26:01 -04:00
Kevin O'Connor	ca04caa42c	docs: Fix SAM4E8E benchmark test revision Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-22 11:21:43 -04:00
Kevin O'Connor	2b81b2935c	docs: Update SAM4E8E benchmarks New benchmark numbers reported by @FHeilmann. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-22 11:18:55 -04:00
Kevin O'Connor	b903f84c80	docs: Replace get_status example with get_clock in Protocol.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-20 11:53:32 -04:00
Kevin O'Connor	530a37196c	docs: Update LPC176x benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-18 09:55:02 -04:00
Kevin O'Connor	0079311b0b	docs: Add an Endstop_Phase.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-16 13:09:49 -04:00
Kevin O'Connor	1e71909d02	endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-16 13:09:49 -04:00
Kevin O'Connor	f5c99c1dec	docs: Update benchmarks for Arduino Due Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-13 11:57:13 -04:00
Kevin O'Connor	aa693fbdc1	docs: Updates to stm32f103 benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-11 10:57:24 -04:00
Kevin O'Connor	75fa74313c	stm32f1: Add support for building with bootloader support Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-11 10:50:51 -04:00
Kevin O'Connor	bc5e961d73	stm32f1: Initial support for serial over USB Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-11 10:50:51 -04:00
Kevin O'Connor	1e07be4db4	docs: Add a "Lost communication with MCU" section to the FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-09 11:22:28 -04:00
Kevin O'Connor	852d1666bb	docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md Reported by @fiveNinePlusR Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-04 19:01:18 -04:00
Arksine	b261d31ec5	bed_mesh: Add ability to save mesh state to persistent memory Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2018-10-02 16:26:35 -04:00
Kevin O'Connor	5c267e4f69	docs: Update Features.md document with tmc2660 support Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-02 14:07:33 -04:00
Kevin O'Connor	33887b8c39	probe: Support manual probing at runtime Don't require the config file to specify manual probing. Instead, allow the user to select manual probing on each ProbePointsHelper invocation. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-10-01 11:12:30 -04:00
Kevin O'Connor	4b5db04f78	docs: Add Delta_Calibrate.md guide with "enhanced delta calibration" Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-25 13:48:46 -04:00
Charlie	1165c0c9c5	docs: Additional images for enhanced calibration procedure reference (#639 ) Signed-off-by: Charles Galant <cgalant@cogwheel.net>	2018-09-25 13:48:46 -04:00
Kevin O'Connor	0b2c89ecaf	delta_calibrate: Initial support for enhanced delta calibration Add support for an enhanced delta calibration routine that performs XY dimension calibration. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-25 13:48:46 -04:00
Kevin O'Connor	5a1b2d61ae	pid_calibrate: Support saving calibration data via SAVE_CONFIG Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-25 13:48:46 -04:00
Kevin O'Connor	531134f092	configfile: Add support for rewriting the printer config file Add support for writing back the main printer config file with additional calibration data stored in it. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-25 13:48:46 -04:00
Kevin O'Connor	3d4ee9e962	docs: Add stm32f1.md link to Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-20 20:11:04 -04:00
Kevin O'Connor	174754299a	heater: Add new TURN_OFF_HEATERS command Add a command that will turn off all heaters in the printer. Run this command in the default idle_timeout action. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-18 16:01:07 -04:00
Kevin O'Connor	094b9de69e	gcode: Send proactive state messages Send a g-code info message on printer state changes. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-12 21:31:27 -04:00
Kevin O'Connor	f15cd62587	docs: Update Pressure_Advance.md document Update the document to recommend tuning with decreased acceleration and with square_corner_velocity disabled. Using this approach makes it possible to test with significantly higher pressure advance values. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-11 12:00:43 -04:00
Kevin O'Connor	c8dc47b162	docs: Note digipot support in Features.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-03 21:10:53 -04:00
Kevin O'Connor	ac3aa097fb	docs: Features.md updates Add information on new features in Klipper. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-09-03 20:55:53 -04:00
Kevin O'Connor	480415d2e8	docs: Update Bootloaders.md with AVR lfuse hints Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-27 12:34:37 -04:00
Kevin O'Connor	a5189f7c25	docs: Add some notes to Bootloaders.md on using the atmega168 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-27 12:08:55 -04:00
Kevin O'Connor	ee67715e2b	docs: Fix link in Bootloaders.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-27 09:16:27 -04:00
Kevin O'Connor	28fe6a5df0	docs: Update SAMD21 flashing information in Bootloaders.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-27 09:07:27 -04:00
Kevin O'Connor	9b56c4f780	docs: Update Bootloaders.md with updated bossac info for sam3x8e Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-27 08:54:43 -04:00
Kevin O'Connor	96acfdc6d2	docs: Minor rewording of Marlin pin number section of FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-26 23:06:32 -04:00
Kevin O'Connor	a27e82aef3	docs: Add a section to the FAQ on translating Marlin pin numbers Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-24 21:43:53 -04:00
Florian Heilmann	a8a912fbb5	docs: Update sam4e8e docs and benchmarks (#562 ) Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>	2018-08-22 19:17:43 -04:00
Arksine	868a1f951b	docs: Add Mesh Bed Leveling to G-Codes.md Signed-off-by: Eric Callahan <arksine.code@gmail.com>	2018-08-17 09:22:55 -04:00
Kevin O'Connor	be3131de3e	docs: Update Config_checks.md to use STEPPER_BUZZ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-09 13:46:07 -04:00
Kevin O'Connor	3f59c3dd48	docs: Add a Bootloaders.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-08 20:47:04 -04:00
Kevin O'Connor	71063fe500	docs: Warn about possible pin conflicts in benchmarks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-08 13:52:08 -04:00
Kevin O'Connor	cbf019a468	docs: It's difficult to estimate real-world usage from the benchmarks Remove the prediction on real-world usage as it's not really practical to make a prediction. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-08 13:39:29 -04:00
Kevin O'Connor	fbec3ebb63	docs: Add benchmarking details to docs/Debugging.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-08 13:28:08 -04:00
Florian Heilmann	64e6d85898	sam4e8e: Add the SAM4e8e port This can be flashed to e.g. the duet wifi using bossac. It requires a later version as is currently included in the klipper repo (1.8 vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>	2018-08-08 10:44:49 -04:00
Kevin O'Connor	a5d27c55e1	docs: Update perf benchmarks with SAMD21 results Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-07 00:03:42 -04:00
Kevin O'Connor	cd24d61515	docs: Minor change to wording of junction speeds Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-03 15:48:07 -04:00
Kevin O'Connor	1fefd695de	docs: Note square corner velocity in lookahead description Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-03 15:43:46 -04:00
Kevin O'Connor	f2d232ef77	force_move: Provide defaults for SET_KINEMATIC_POSITION parameters Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-08-02 08:58:18 -04:00
Kevin O'Connor	09a64d24f1	docs: Remove the Todo.md file The Todo.md file has gotten stale, and it is no longer an effective mechanism for tracking changes. Remove it. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-26 12:51:01 -04:00
Kevin O'Connor	c0c892d524	force_move: Add support for FORCE_MOVE command Add initial support for commands that will forcibly move a stepper (without updating the kinematic classes with the new position). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-26 12:44:07 -04:00
Kevin O'Connor	0025fbf10d	toolhead: Replace junction_deviation with square_corner_velocity The junction_deviation configuration parameter has a number of quirks that make it difficult to configure. Replace it with a "square_corner_velocity" configuration parameter. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-16 10:32:43 -04:00
Kevin O'Connor	f60b0093b7	docs: Add a section with micro-controller porting tips to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-11 14:40:39 -04:00
Kevin O'Connor	4125e176b7	docs: Expand on why it is important to provide the log in Contact.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-08 20:30:35 -04:00
Kevin O'Connor	fa9b321991	docs: Update main documentation to not Smoothieboard support Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-08 11:01:54 -04:00
Kevin O'Connor	f3ac1a2306	docs: Add M206 and M119 to G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-08 10:23:44 -04:00
Kevin O'Connor	b4f03e8363	docs: Add display g-code commands to docs/G-Codes.md Add M117 and M73 to the list of supported G-Codes. Also, remove M117 from the list of commands reported by the HELP command as that command is typically only used to list "extended g-code" commands. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-08 10:12:23 -04:00
Grigori Goronzy	5c7c8c984b	stm32f1: add SPI support Add basic SPI support and associated documentation. v2: remove baud rate check, fix baud rate calculations v3: finish transaction with BSY check, disable SPI when not in use Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>	2018-07-07 11:05:33 -04:00
Kevin O'Connor	7e9ee6aef7	docs: Minor updates to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-03 13:33:48 -04:00
Kevin O'Connor	e08bb4f196	docs: Fix whitespace error in stm32f1.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-07-01 09:41:35 -04:00
Kevin O'Connor	b41770caa6	tmc2130: Add a DUMP_TMC helper command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-30 19:01:56 -04:00
Grigori Goronzy	eb02043943	stm32f1: add port documentation (#425 ) Fixes #412. Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>	2018-06-27 18:21:23 -04:00
Kevin O'Connor	d651851567	pru: Disable ADC reading directly from the PRU The PRU code size has grown too close to the maximum - remove the ADC code to reduce its overall size. (On the beaglebone, the Linux process can, and typically does, do the ADC reading.) Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-27 12:10:25 -04:00
Kevin O'Connor	890298d34d	itersolve: Support setting the stepper position via a cartesian coordinate Add support for an itersolve_set_position() function that sets a stepper position from a cartesian coordinate. This eliminates the need for both the python and C code to be able to translate from a cartesian coordinate to a stepper position. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-22 14:09:01 -04:00
Kevin O'Connor	0216201cb6	delta: Rename get_position() to calc_position() Calculating the cartesian position from the stepper positions can be complex and cpu intensive, so rename it to calc_position() to be more descriptive. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-22 14:09:01 -04:00
Kevin O'Connor	3ac9fc6e63	docs: Update documentation with iterative solver changes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-20 09:26:10 -04:00
Kevin O'Connor	efe63d5efe	toolhead: Add support for the M204 command Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-15 12:05:45 -04:00
Kevin O'Connor	2c4ca88887	docs: Update documentation to note use of /dev/serial/by-path/ When using multiple micro-controllers it may be necessary to use an id from /dev/serial/by-path/ instead of /dev/serial/by-id/. Also, emphasize that in config/example-multi-mcu.cfg. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-06-01 17:22:03 -04:00
Kevin O'Connor	b93fd5b1b5	basecmd: Rename get_status to get_clock Change the get_status command to get_clock. Don't report the shutdown status in the new get_clock command. The primary purpose of this change is to force the host code to report a firmware version mismatch with older firmwares as recent changes (namely the ordering of message block acks) have subtle incompatibilities if different host/mcu code is used. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-29 10:57:29 -04:00
Kevin O'Connor	c9dfdf21e5	docs: Remove lpc176x item from Todo Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-25 13:56:54 -04:00
Kevin O'Connor	83d3c17280	docs: Add LPC1768 benchmarks to Features.md document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-25 11:52:13 -04:00
Kevin O'Connor	ee4f37fe0c	stepper: Add STEPPER_BUZZ command Add a new command that can help diagnose stepper motor connectivity. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-24 09:49:17 -04:00
Kevin O'Connor	e50c2aa38d	docs: Remove "touch panel" item from Todo document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-23 22:31:45 -04:00
Kevin O'Connor	3025638b9b	z_tilt: Add support for Z_TILT_ADJUST Add new module to support independent adjustments to multiple Z steppers to account for bed tilt. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-22 22:23:44 -04:00
Kevin O'Connor	42ca985bef	docs: Add reference to homing_override in FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-20 19:33:54 -04:00
Kevin O'Connor	2ab47cd20c	extruder: Fix SET_PRESSURE_ADVANCE so that it works with multiple extruders Use the new gcode.register_mux_command() so that SET_PRESSURE_ADVANCE works correctly with multiple extruders. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-20 12:52:19 -04:00
Kevin O'Connor	22487d95e9	spicmds: Rework SPI message transmission Improve the SPI message transmit system. Add support for bus speed and bus mode. Add support for sending SPI messages on shutdown. Signed-off-by: Petri Honkala <cruwaller@gmail.com> Signed-off-by: Douglas Hammond <wizhippo@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-07 09:10:34 -04:00
Kevin O'Connor	cd9e21e3aa	FAQ: Add item on TMC2208 being disabled in the middle of a print Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-05-05 13:06:55 -04:00
Kevin O'Connor	15248706ae	chelper: Move the host C code to a new klippy/chelper/ directory Move the C code out of the main klippy/ directory and into its own directory. This reduces the clutter in the main klippy directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-30 11:44:53 -04:00
Kevin O'Connor	22c49a7c3f	docs: Improve FAQ update software entry (use make menuconfig ; make clean) Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-25 10:29:55 -04:00
Kevin O'Connor	3ef7c00b73	docs: Fix internal link description in Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-23 18:23:39 -04:00
Kevin O'Connor	bdd26e421b	toolhead: Add a SET_VELOCITY_LIMIT command Add a command to adjust the maximum velocity, acceleration, and junction deviation parameters. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-20 22:36:05 -04:00
Kevin O'Connor	6d03dee104	gcode: Add a SET_GCODE_OFFSET command The M206 command is confusing (it uses negative offsets) and isn't very flexible. Add a new SET_GCODE_OFFSET command to make it easier to add virtual offsets to gcode commands. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-20 20:04:41 -04:00
Kevin O'Connor	832c0bc017	docs: Add more hints to use /dev/by-id/ for the serial device Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-20 11:57:49 -04:00
Kevin O'Connor	606222da5b	docs: Add STM32F103 benchmarks to the Features document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-20 11:19:37 -04:00
Kevin O'Connor	c539fed8bb	docs: Add additional information to FAQ on heater checks Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-09 22:00:26 -04:00
Kevin O'Connor	97f30765a1	docs: Update installation document for OctoPrint 1.3.7 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-04-09 11:39:36 -04:00
Michael Barbour	a301713361	extruder: Add SET_PRESSURE_ADVANCE command. Signed-off-by: Michael Barbour <barbour.michael.0@gmail.com>	2018-04-03 00:00:41 -04:00
Kevin O'Connor	bee179eab4	docs: Update release notes for v0.6.0 release Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-31 14:04:39 -04:00
Kevin O'Connor	039bb9f10f	docs: Add Patreon link to FAQ page Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-31 13:55:41 -04:00
Kevin O'Connor	a6553538e6	docs: Update G-Codes.md with recent output_pin changes Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-28 15:11:10 -04:00
Kevin O'Connor	019666a6f6	docs: Add a section on adding new host modules to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-28 13:12:41 -04:00
Kevin O'Connor	f5c67baac2	docs: Recommend running PID_CALIBRATE in Config_checks.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-18 12:43:41 -04:00
Kevin O'Connor	973ef97143	pid_calibrate: Move PID calibration logic from heater.py to new file Drop support for M303 and PID_TUNE, and replace it with a new PID_CALIBRATE command. Move the logic for this command from heater.py to a new pid_calibrate.py file in the extras/ directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-18 12:02:30 -04:00
Kevin O'Connor	5c05a24947	docs: Fix typo in M220 description in G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-18 11:44:56 -04:00
Kevin O'Connor	451f7d5672	gcode: Position returned by M114 should be relative to last G92 It looks like OctoPrint is expecting the result from M114 to be relative to the last G92 command. Also, introduce GET_POSITION to report the actual location that the printer is at. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-15 20:00:51 -04:00
Kevin O'Connor	ef820d98f6	docs: Add "will heaters be turned off on a crash" item to FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-13 11:36:45 -04:00
Kevin O'Connor	5208fc38ed	verify_heater: Add initial support for verifying heaters and sensors Add runtime checks to heaters and temperature sensors to check for possible hardware faults. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-11 00:49:11 -05:00
Kevin O'Connor	e53a589ac3	docs: Add SET_DUAL_CARRIAGE command to G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-10 20:22:13 -05:00
Kevin O'Connor	ddcf9a7ff7	docs: Add Tx command to G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-08 14:40:26 -05:00
Kevin O'Connor	05ec7ca7ff	docs: Add a G-Codes.md file with the list of available commands Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-08 14:11:20 -05:00
Kevin O'Connor	82a65e9f4a	docs: Note the use of the virtual_sdcard feature Note that virtual_sdcard helps on slower machines. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-03-02 11:28:01 -05:00
Kevin O'Connor	5e8aaed41f	docs: Add tips for porting to new kinematics to Code_Overview.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-02-17 13:48:53 -05:00
Dave Bacon	268d1cb27c	docs: Update Config_checks.md Navigation should be to the temperature tab to find the Tool temperature box. Signed-off-by: Dave Bacon <drb.github@mrbacon.com>	2018-02-07 22:24:32 -05:00
Kevin O'Connor	7d3600f918	docs: Add github issue template Add an issue template requesting the klippy log file. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-31 14:30:05 -05:00
Kevin O'Connor	650d55d7b2	docs: Remove bed level probe from todo Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-28 20:36:04 -05:00
Kevin O'Connor	08444a8b89	docs: Try to make the klippy.log bug reporting more clear Emphasize that the log file needs to be attached to the issue. Encourage M112 to be issued on every bug report. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-21 13:08:31 -05:00
Kevin O'Connor	054cbbe094	docs: Add a FAQ item on steps to upgrade the software Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-12 18:38:49 -05:00
Kevin O'Connor	f1222565b8	docs: Update Debugging.md with information on logextract Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-11 13:48:40 -05:00
Kevin O'Connor	df6528715e	stepper: Automatically detect and handle shared stepper enable lines It's common for multiple steppers to use the same stepper enable line. Detect this and only create a single digital_out oid on the micro-controller. Also, prohibit any other pin from being used multiple times in the config file. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-10 19:10:26 -05:00
Kevin O'Connor	0cf06ee69a	docs: Note pressure_advance over 0.20 is unlikely to improve quality Update the pressure advance tuning document to note that 0.20 is likely the ceiling of a useful pressure advance setting. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-08 11:07:26 -05:00
Kevin O'Connor	83e9e92b9a	docs: Add a table of contents to the FAQ Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-05 11:42:00 -05:00
Kevin O'Connor	29c83cec22	docs: Update installation document with pointers to FAQ Add some pointers to the FAQ for common pitfalls during installation. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-04 13:29:17 -05:00
Kevin O'Connor	e4129a7e53	docs: Minor update to square.scad Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2018-01-02 21:56:29 -05:00
Kevin O'Connor	1bdebeaebf	docs: Add an initial configuration checklist document Provide a document with basic steps that a user can run to verify that the pins in the configuration file are set correctly. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-12-26 20:54:37 -05:00
Kevin O'Connor	479772ca00	docs: Add a CONTRIBUTING document Add an initial document detailing best practices for contributing to the document. Add the "developer certificate of origin" document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-12-24 12:33:01 -05:00
Kevin O'Connor	522093ef00	docs: Offer alternatives to ssh/scp/sftp Try to make the Installation document more friendly to users not familiar with the Linux command-line. Offer some hints on how to obtain ssh and how to edit the config file remotely. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-12-21 17:34:35 -05:00
Kevin O'Connor	9a4425c85a	docs: Update square test print to contain notches on inside of square Add additional notches and move them to the inside of the square where they will not impact the outside perimeter test. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-12-17 12:18:25 -05:00
Kevin O'Connor	8944e2104d	docs: Add FAQ item on AVR watchdog restart failures Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-12-11 18:17:14 -05:00
Kevin O'Connor	319221ee23	docs: Provide additional information on "make flash" failures Add some additional information on "make flash" problems. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-12-11 17:33:29 -05:00
Kevin O'Connor	37788c1e55	docs: Add a FAQ document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>	2017-11-30 15:19:40 -05:00

... 6 7 8 9 10 ...

867 Commits