Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Update installation document for OctoPrint 1.3.7 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-04-09 11:39:36 -04:00
parent f616a88b15
commit 97f30765a1
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
docs/Installation.md
View File

@ -17,7 +17,7 @@ Raspberry Pi computer. Use OctoPi v0.14.0 or later - see the
[octopi releases](https://github.com/guysoft/OctoPi/releases) for
release information. One should verify that OctoPi boots and that the
OctoPrint web server works. After connecting to the OctoPrint web
page, follow the prompt to upgrade OctoPrint to v1.3.5 or later.
page, follow the prompt to upgrade OctoPrint to v1.3.7 or later.
After installing OctoPi and upgrading OctoPrint, it will be necessary
to ssh into the target machine to run a handful of system commands. If
@ -84,8 +84,9 @@ Under "Serial Connection" in "Additional serial ports" add
"/tmp/printer". Then click "Save".
Enter the Settings tab again and under "Serial Connection" change the
"Serial Port" setting to "/tmp/printer". Unselect the "Not only cancel
ongoing prints but also disconnect..." checkbox. Click "Save".
"Serial Port" setting to "/tmp/printer". Navigate to the "Behavior"
sub-tab and select the "Cancel any ongoing prints but stay connected
to the printer" option. Click "Save".
From the main page, under the "Connection" section (at the top left of
the page) make sure the "Serial Port" is set to "/tmp/printer" and