Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
1,612 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

1612 Commits

Author SHA1 Message Date
Kevin O'Connor d0f09727a9 bltouch: Issue both a "reset" and a "pin_up" after a successful probe 
Not all BLTouch clones raise the pin on a "reset" request, so
explicitly send a "pin_up" command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-16 11:06:46 -05:00
Kevin O'Connor ccc25a03d5 bltouch: Add a config option to disable the bltouch sensor test 
It appears some bltouch "clones" do not report the probe as triggered
when put in "touch mode" while the pin is raised.  Add a config option
to allow users to disable the test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-16 11:06:41 -05:00
Kevin O'Connor ce064e6e2d bltouch: Always make sure to check the endstop at least every 1ms 
Some of the bltouch implementations may only respond to a probe event
with a 5ms pulse.  Make sure to check the signal pin at least every
millisecond to ensure no signal is lost.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-16 11:06:27 -05:00
Uri Shaked 79d65d8ead config: Fix CR-20 click pin polarity 
Signed-off-by: Uri Shaked <uri@urishaked.com>
 2018-12-15 18:38:03 -05:00
Uri Shaked cc4227aec8 config: Add printer config for the CR-20 by Creality3D 
Signed-off-by: Uri Shaked <uri@urishaked.com>
 2018-12-15 17:42:23 -05:00
Yannic Schroeder f100d75c19 stm32f1: Always read SPI receive buffer 
Otherwise the first byte read via SPI may be the last byte
of the previous transfer

Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
 2018-12-14 12:25:35 -05:00
TronskiFPV ef4f84e3ae config: Update printer-creality-ender3-2018.cfg (#959) 
Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's.

Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
 2018-12-05 16:43:14 -05:00
Kevin O'Connor 76b57ba05a bltouch: Fix typo in pin_move_time parsing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-04 11:43:04 -05:00
Kevin O'Connor 44aa5def73 bltouch: Allow the pin_move_time to be configured 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-04 10:34:54 -05:00
Kevin O'Connor e0b2d7c51d bltouch: Add a BLTOUCH_DEBUG command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-03 22:52:32 -05:00
Kevin O'Connor aac92ffb91 bltouch: Fix bug - must restore stepper position after homing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-01 22:09:06 -05:00
Kevin O'Connor 6df7356baa samd21: Fix gpio in support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 23:10:23 -05:00
Kevin O'Connor e505ab0df1 samd21: Add support for flashing an application via the bossac tool 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 22:22:42 -05:00
Kevin O'Connor f2179da8ad samd21: Add support for hardware pwm 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 20:00:59 -05:00
Kevin O'Connor 0fd2dd7c11 samd21: Minor simplification to timer init code 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor d6f3f6b664 samd21: Add support for SPI 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor 58d61c7887 samd21: Add support for basic i2c support (write only) 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor 6d90ebe6f8 samd21: Use GPIO() macro when calling gpio_peripheral() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor 0af0bc946e samd21: Enable watchdog 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor afa58de014 samd21: Try to clarify the "generic clock generator" configuration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor 3a47d972db i2ccmds: Validate the i2c address 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:50 -05:00
Kevin O'Connor db4f0c24cd spicmds: Check for an incorrect mode in spicmds.c 
Check the mode parameter in spicmds.c so that the mcu code does not
need to check it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:50:48 -05:00
Kevin O'Connor 6b108aa885 stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:42:54 -05:00
Arksine 581b1439f3 config: Update bed_mesh in example-extras.cfg 
Update documentation about the fade options. Also inform the user that it is recommended to home toward the center of the print area when using a probe for z homing.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-11-30 11:37:21 -05:00
Arksine cf6a56cebf bed_mesh: Introduce fade_target option 
To deal potential z scaling when fade is enabled, a fade_target option has been introduced.  This option may either be set to 0.0 or any z position within the range of the mesh.  A value of 0.0 will result in previous behavior, where z adjustment phases out until no further adjustment is added.  A non-zero value will phase out adjustment until the target has been reached, after which the rest of the print will be offset along the z axis by the fade_target.  By default the fade_target will be calculated as an average of the mesh.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-11-30 11:37:21 -05:00
Arksine 35f41b7402 bed_mesh: Disable z-adjustment fade by default. 
Due to various potential issues with fading out z-adjustment, it is better to disable by default and allow users to opt-in.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-11-30 11:37:21 -05:00
Kevin O'Connor 824e55d75a bltouch: Add initial support for a bltouch "extras" module 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:34:20 -05:00
Kevin O'Connor f01ced8ed4 config: Rework sample-bltouch.cfg into sample-probe-as-z-endstop.cfg 
The example configuration information is more useful for general probe
as z_endstop than as a bltouch example.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:34:20 -05:00
Kevin O'Connor 7699304f9b graphstats: Change stats filter to use print_time instead of bytes_write=0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-26 17:37:04 -05:00
ruevs b8f92c73ed config: Make the Anycubic delta configurations as similar as possible 
Signed-off-by: Peter Ruevski <dpr@ruevs.com>
 2018-11-25 17:14:16 -05:00
Kevin O'Connor a726c58671 mcp4451: Minor update - remove unnecessary mcu import 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-24 00:36:49 -05:00
Kevin O'Connor 147d805231 mcp4451: Use bus.py helper code for i2c 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-24 00:33:22 -05:00
Kevin O'Connor 729a2e8306 avr: Add support for sending I2C messages 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-23 23:49:26 -05:00
Kevin O'Connor e5150fe187 uc1701: Add support for SSD1306 in i2c mode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-23 22:04:06 -05:00
Kevin O'Connor 043170265b i2ccmds: Minor whitespace changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-23 21:36:44 -05:00
Kevin O'Connor d2aa78c16a uc1701: Cache icons and fonts in byte display order 
This reduces the amount of bit manipulaton needed during screen
updates.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:45:53 -05:00
Kevin O'Connor 065a8eb826 uc1701: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:45:53 -05:00
Kevin O'Connor a79d87ca8e uc1701: Add all_framebuffers to reduce vram indexing in the code 
Add a self.all_framebuffers variable and change self.vram to only
contain the new display data.  This allows the main code to access the
self.vram member variable without the need to index for current/old
data.  (It also updates the code to match the latest st7920 and
hd44780 code.)

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:45:53 -05:00
Kevin O'Connor e231ac7422 uc1701: Add support for SSD1306 displays 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:45:53 -05:00
Kevin O'Connor a00d7b418f display: Add a get_dimensions() method to lcd chip classes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:45:53 -05:00
Kevin O'Connor cbbc6801a0 lpc176x: Enable full speed peripheral clocks on SPI and I2C 
Scale the bus speed within the peripheral instead of on the system bus
as scaling on the system bus slows down general register access to the
peripheral.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:44:39 -05:00
Kevin O'Connor 4bbd631086 lpc176x: Add an enable_peripheral_clock() helper function 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 20:44:18 -05:00
Kevin O'Connor 9ba94ded9e tmc2660: Use bus.py helper code for spi 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor 1c71ea27e0 uc1701: Use bus.py helper code for spi 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor 5bb0bd755d tmc2130: Use bus.py helper code for spi 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor ab6a8ec76e ad5206: Use bus.py helper code for spi 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor be58c7f8ec replicape: Use bus.py helper code for spi 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor 7cadd8d3f4 spi_temperature: Use bus.py helper code for spi 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor 58890e32a2 bus: Add klippy/extras/bus.py module with SPI bus helper code 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-21 12:12:31 -05:00
Kevin O'Connor 7bb9ce8436 avr: Minor comment update in hard_pwm.c 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-20 13:14:53 -05:00