ada571ecb8
stm32: Enable Automatic retransmission feature to avoid data loss caused by bus conflict for STM32G0B1 fdcan ( #5550 )
...
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-06 10:59:18 -04:00
db5a4351a5
Kconfig: Move CANBUS_FREQUENCY definition from src/stm32/Kconfig to src/Kconfig
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-04 11:56:59 -04:00
c1f4bdebf2
armcm_reset: Add a armcm_reset.h header file for try_request_canboot()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-04 11:52:39 -04:00
9047702a00
mkdocs: Replace TOC in Translations
...
Signed-off-by: Yifei Ding<yifeiding@protonmail.com>
2022-06-03 19:14:13 -04:00
7c8cf7661b
docs: fix typo in Exclude_Object.md
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-06-03 18:11:35 -04:00
c43f62bdd6
lib: Update lib/README with latest canboot changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 14:53:18 -04:00
b829a89069
flash_can: add usb support
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-03 14:51:01 -04:00
39535b15ba
stm32: use TME bits to find the canbus tx mailbox
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-03 14:51:01 -04:00
3c7eea7336
stm32: call "try_request_canboot" for bootloader requests
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-03 14:51:01 -04:00
129091d811
canbus: use "try_request_canboot" method
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-03 14:51:01 -04:00
8b1e3c3fb2
armcm_reset: support canboot detection
...
When CanBoot is detected set its bypass signature when a
reset is requested.
Add a "try_request_canboot()" method that may be called
from from USB and Canbus bootloader requests.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-03 14:51:01 -04:00
04eb72dcd5
virtual_sdcard: Fix merge error
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 14:23:56 -04:00
638cd4d781
docs: add exclude_object documentation
...
Also include sample macros to add M486 compatibility.
Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
2022-06-03 14:12:04 -04:00
89c59b035e
exclude_objects: initial implementation
...
Adding Klipper functionality to support cancelling objects while
printing.
This module keeps track of motion in and out of objects and adjusts
movements as needed. It also tracks object status and provides that to
clients.
The Klipper module is relatively simple, and only provides one piece of
the workflow. Moonraker already supports processing uploaded files to
insert the required gcode markers for cancelling objects, using
https://github.com/kageurufu/cancelobject-preprocessor . This library is
also available as an executable for use in slicers, and pip
installations also include the script as a callable.
Mainsail has integrated support, and code changes for Fluidd are
available. Support in other interfaces is planned, and we've spoken to
several other developers about integrating frontend support in their
projects.
Signed-off-by: Troy Jacobson <troy.d.jacobson@gmail.com>
Co-authored-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Eric Callahan <arksine.code@gmail.com>
2022-06-03 14:12:04 -04:00
04952db1e8
tuning_tower: add is_active() method
...
Signed-off-by: Troy Jacobson <troy.d.jacobson@gmail.com>
Co-authored-by: Franklyn Tackitt <git@frank.af>
2022-06-03 14:12:04 -04:00
2e04be4451
virtual_sdcard: Add reset_file event
...
Signed-off-by: Troy Jacobson <troy.d.jacobson@gmail.com>
Co-authored-by: Franklyn Tackitt <git@frank.af>
2022-06-03 14:12:04 -04:00
df39465534
config: Rename sample-huvud-v0.61.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 11:43:34 -04:00
79d6b37ac9
config: Huvud KlipperToolhead config
...
Pin information and basic flashing instructions for the Huvud CAN bus toolhead board. V0.61
Signed-off-by: Charles Pickering <me@charlespick.xyz>
2022-06-03 11:43:09 -04:00
742df16a51
config: Update ender3 s1 configs to use gear_ratio
...
The gearing mechanism is 42:12. Reported by @filipenobrerc.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 11:33:39 -04:00
06a31222d3
COPYING: Update GPLv3 license to latest text (uses https instead of http)
...
The latest text of the GNU GPLv3 license updates the web references to
https (instead of the older http). Update to that latest text.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 11:28:44 -04:00
c16eab212e
virtual_sdcard: Adds on_error_gcode
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-06-03 11:26:34 -04:00
dbc24ce339
config: Add BTT SKR 3 & EBB CAN V1.0 & V1.1 board cfg ( #5529 )
...
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-01 11:28:10 -04:00
63affd7006
stm32: Rework kconfig to use CONFIG_CANSERIAL for both can.c and fdcan.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-01 10:59:10 -04:00
907b47b238
flash_usb: Rework flash_rp2040 code to be similar to other boards
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-01 10:47:31 -04:00
1ff7261203
stm32: stm32g0b1 fdcan support ( #5488 )
...
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-01 10:43:45 -04:00
af38d708cb
adxl345: Support recording data from multiple ADXL345's in one run, and more. ( #5224 )
...
Add PROBE and CHIP to TEST_RESONANCES
Since it's possible to specify more than one chip
in TEST_RESONANCES the CHIP parameter has been
renamed to CHIPS
Signed-off-by: Mikkel Schmidt <mikkel.schmidt@gmail.com>
2022-05-23 19:56:58 -04:00
c7e0372c5d
docs: Line wrapping in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:50:43 -04:00
3081899883
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter ( #5522 )
...
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
2022-05-23 15:49:59 -04:00
19a478de37
stm32: Don't allow USB on internal clock for stm32f103/stm32f070
...
Reported by @kaidegit.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:35:05 -04:00
5a94764c38
config: Minor changes to ender3-s1 and ender3-s1pro configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:27:17 -04:00
00934e1378
config: Ender 3 S1/S1 Pro Default Configurations ( #5332 )
...
Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-05-23 15:23:22 -04:00
f1c6f76a51
docs: Update Config_Reference.md z_hop speed ( #5514 )
...
The default z-hop speed is actually 15 mm/s according to the code in safe_z_home.py
Signed-off-by: Cameron River <camerony@gmail.com>
2022-05-23 15:05:53 -04:00
4490a58411
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard ( #5508 )
...
Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-18 12:28:23 -04:00
bbb06a014b
docs: fix links to Config_Reference.md
...
Signed-off-by: Dominik Willner <th33xitus@gmail.com>
2022-05-18 12:05:28 -04:00
996b73e25d
config: Remove hold_current from generic-th3d-ezboard-lite-v2.0.cfg
...
We no longer recommend setting a hold_current.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 21:22:51 -04:00
1c18265a62
docs: Minor wording update to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:55:17 -04:00
e8dc44a0ca
docs: Update Code_Overview.md with more realistic task timing guidelines
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:46:38 -04:00
95676343db
docs: Updates to Installation.md document
...
Recommend users obtain an example config file prior to starting the
installation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 11:36:36 -04:00
defce11235
config:Create configuration file for Fly-Gemini-v1 motherboard ( #5474 )
...
Create configuration file for Fly-Gemini-v1 motherboard
Add stm32f405 and generic-mellow-fly-gemini-v1.cfg to test cases
Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-14 10:36:10 -04:00
9c45f53b24
Makefile: Default to python3 for micro-controller build scripts
...
It's more likely that python3 will be installed than python2 on a
typical modern Linux distribution, so use python3 by default.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-13 14:07:20 -04:00
8268478006
homing: Fix bug in multi_complete()
...
Reported by @skrogh.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-13 13:53:17 -04:00
c14118e9c6
misc: Import misc.h in all files defining console_sendf()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-13 11:22:47 -04:00
a6b3d2f18f
stm32: Remove unused header from can.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 15:03:55 -04:00
2c441b4502
canbus: Rename CANBUS_CMD_SET_NODEID to CANBUS_CMD_SET_KLIPPER_NODEID
...
Rename the command name for consistency with the canbus_query.py
script.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 11:55:06 -04:00
be4b8b17f2
docs: Minor CanBoot documentation fixes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-10 11:55:06 -04:00
88731c2836
scripts: identify application in canbus_query
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
95d06c95e3
docs: add CanBoot documentation to bootloaders.md
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
5ec3939f34
lib: add flash_can.py
...
This script may be used to update Klipper firmware for CAN
nodes running the CanBoot bootloader.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
60625f4422
stm32: add 8 KiB bootloader option for F0x2 devices
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
81ff8e125c
canbus: send 8 bytes in the id response
...
The last byte contains the "node id" command, which is used to
identify the application.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
BIGTREETECH
Kevin O'Connor
Yifei Ding
Stefan Dej
Eric Callahan
Frank Tackitt
Troy Jacobson
Charles Pickering
Pedro Lamas
Mikkel Schmidt
Kevin Nguyen
Fisheiyy
camerony
kluoyun
th33xitus