49d83bd3e2
console: Add support for DUMP and FILEDUMP commands
...
Add helper functions to dump memory via debug_read commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 13:30:39 -04:00
b026f1d2c9
canserial: Fix typo in canserial.h
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
dc012f8659
docs: Recommend allow-hotplug in CANBUS.md when using USB to canbus bridge
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
2005d4dbf4
docs: Updates to CANBUS_protocol.md
...
Update the document with latest details.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
9e3feab0b4
stm32: Remove stm32f4 canbus warning
...
The canbus code has been successfully tested on stm32f4.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
751bff7d38
mcu: Delay reset signaling for usb to canbus bridge nodes
...
An mcu device acting as an "mcu bridge" should only be reset after
other normal devices are reset - otherwise the bridge wont be able to
pass along the reset message to the downstream mcus.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
2d74b3d358
canserial: Request bootloader via bootloader_request()
...
Use bootloader_request() instead of try_request_canboot(). This
allows the bootloader machanism to work for more bootloaders.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
18ff84aa04
usb_cdc: Rename usb_request_bootloader() to bootloader_request()
...
Rename this board API function to a more generic name. This is in
preparation for calling the function from the canbus code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
48b60a8021
graphstats: Normalize mcu frequency to microseconds when graphing multiple mcus
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
db6346e7e5
serialqueue: Improve canbus timing
...
Adjust timing based on the minimum transmission time of canbus
messages.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
2293e1506f
canbus_ids: Use 4 as the first nodeid to reduce id bitstuffing
...
Starting with nodeid 4 instead of nodeid 0 can reduce bitstuffing of
the id field in common configurations.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
b725d971db
bed_screws: report status
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-28 20:43:19 -04:00
c29e190696
docs: fixes typo on heater_bed
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-28 20:37:34 -04:00
3796a31959
stm32: Add CCRDY check to stm32g0 adc
...
The stm32g0 specification states that it is required to wait for the
CCRDY flag to be raised after changing the channel configuration.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-25 10:21:29 -04:00
3387a9c23d
config: Use printer-creality-ender3-s1-2021.cfg for both s1 and s1 pro.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-24 08:49:25 -04:00
282d1113e4
manual_probe: report status
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-21 22:03:31 -04:00
407be177d5
config: Fix wording of serial port selection on recent creality configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-21 21:56:46 -04:00
0c74b3d8bf
config: Integrate configuration file for Creality Sermoon V1. ( #5621 )
...
Configuration for the stock Creality Sermoon V1.
Signed-off-by: Du Chengyao <hbyls@live.com>
2022-07-21 21:45:05 -04:00
a151aa8c7a
spi_flash: Add board definition for Mellow FLY Gemini V2 ( #5651 )
...
Signed-off-by: Tobias Schröder <schroedt@live.de>
2022-07-20 21:57:08 -04:00
e9c83d66e0
config: Fix screw typo in printer-creality-cr10-v3-2020.cfg
...
Reported by @TonyRouse.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-19 13:46:50 -04:00
dd03cca49b
config: Change of alias for heater_fan in multiple configs ( #5632 )
...
This PR serves to fix a longstanding misnomer in some config files. Many configs state a nozzle_cooling_fan alias for what is usually a "hotend cooling fan". This causes ambiguity and confusion with the parts fan. I have identified all 24 files with this and changed them here.
Signed-off-by: James Hartley <james@hartleyns.com>
2022-07-19 13:02:51 -04:00
6be114d728
docs: fix rawparams example by truncating comments
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-19 12:48:16 -04:00
50b4d4c43c
config: Note 25Mhz clock in generic-bigtreetech-skr-3.cfg
...
Reported by @kingtricky and confirmed by @bigtreetech.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-19 12:44:18 -04:00
d91939c4bf
docs: Add BIGTREETECH to Sponsors.md file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 23:17:30 -04:00
75c4b1238e
lib: Update to latest can2040 code
...
Simplify tx state tracking.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 21:08:58 -04:00
2f9fe49cb8
docs: Add a Sponsors.md file
...
Add a documentation page with information on how to support Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 10:48:10 -04:00
8a038c6941
workflows: Fix spurious path in klipper3d-deploy.yaml
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 10:45:26 -04:00
06022b305f
mkdocs-requirements: Force markdown==3.3.7
...
A new release of markdown (v3.4.1) breaks the website deployment
scripts. Force the existing version.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 10:43:53 -04:00
36887ce6fe
lib: Update to the latest can2040 code
...
Rename to "match" state machine instead of "ack".
Minor simplification to tx_note_crc_start().
Call pio_match_clear() from report functions.
Add pio_match_calc_key() helper function.
Raise irq after 6 passive eof bits for faster rx message notification.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-16 09:57:12 -04:00
24a1b50e51
config: Added Anet alt-wiring display example ( #5605 )
...
Signed-off-by: Vladimir Serov <cab404@mailbox.org>
2022-07-06 15:56:02 -04:00
a283e0f7d4
webhooks: Close clients that become unresponsive
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-06 09:54:44 -04:00
7b9583391e
webhooks: Use reactor to watch for writable fds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-06 09:54:44 -04:00
02dd0742c4
reactor: Add support for waiting on fds becoming writable
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-06 09:54:44 -04:00
be503b2b9b
rp2040: Add support for USB to CANbus bridge mode
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-06 00:28:48 -04:00
a831254e83
rp2040: Initial support for CANbus
...
Add support for CANbus on the rp2040 using the can2040 "software
canbus" implementation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-06 00:28:48 -04:00
f10fd7c2fa
lib: Add can2040 code
...
The "can2040" project implements "software canbus" support on rp2040
micro-controllers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-06 00:28:48 -04:00
1636a9759b
stm32: stm32g0/h7 usb_dfu_bootloader support ( #5596 )
...
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-30 13:58:00 -04:00
167736ad1c
respond: No forced spaces ( #5152 )
...
Signed-off-by: Adrian Joachim <adi.joachim12@gmail.com>
2022-06-30 13:56:35 -04:00
a8f08b08ca
test: Fix ordering of printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-29 19:37:52 -04:00
4404c98637
test: Add printer-biqu-b1-se-plus-2022.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-29 18:10:47 -04:00
e952b021e8
config: Create printer-biqu-b1-se-plus.cfg ( #5477 )
...
Signed-off-by: Bruno Melo <brunomelo81@gmail.com>
2022-06-29 18:07:26 -04:00
790ff4d8d7
usb_canbus: Initial support for USB to CAN bridge mode
...
Support a USB interface that shows up as a canbus adapter to linux.
Route both local and real canbus packets over that interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-27 10:50:23 -04:00
c8cc98ce5d
canserial: Rename canbus.c to canserial.c
...
Rename the canbus.c code to canserial.c and introduce new wrapper
functions in canbus.c that connect the low-level canbus hardware code
to the high-level canserial.c code.
This is in preparation for adding "usb to canbus bridge mode".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-27 10:50:23 -04:00
11828387d9
usb_cdc_ep: Change default endpoint numbers
...
Change the default endpoint numbers to make it possible to implement
the "gs_usb" canbus protocol.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-27 10:50:23 -04:00
f5d5f53914
stm32: Add support for disabling the canbus filter
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-27 10:50:23 -04:00
84b2bfe313
stm32: Add MCU temp for Stm32h7 ( #5606 )
...
Added mcu temperature to the stm32h7 processor.
Signed-off-by: Aaron DeLyser <bluwolf@gmail.com>
2022-06-27 10:16:09 -04:00
045455648a
klippy: properly set log level when logging to stderr
...
The `logging.basicConfig` does not reconfigure default logger.
This results in printing only warnings/errors to stderr
instead of also info (or debug).
This fixes the issue by setting log level on root logger.
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
2022-06-27 10:14:27 -04:00
6ad6e39ad2
docs: add SET_DISPLAY_TEXT documentation
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-27 10:09:02 -04:00
a431900f7f
display_status: Implement SET_DISPLAY_TEXT command
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-27 10:09:02 -04:00
ae17b66a88
docs: remove FAQ ToC ( #5585 )
...
Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
2022-06-27 09:58:48 -04:00
Kevin O'Connor
Pedro Lamas
S1NH
s6t
JamesH1978
Cabia Rangris
BIGTREETECH
chestwood96
Bruno Melo
adelyser
Kamil Trzciński
Eric Callahan
Yifei Ding