Commit Graph

353 Commits

Author SHA1 Message Date
Arksine 69491e2dab filament_switch_sensor: update documentation
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2019-03-01 00:45:51 -05:00
Kevin O'Connor c8d7e28a35 atsamd: Add support for programming SERCOM pins
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:40:44 -05:00
Kevin O'Connor 8446f28850 config: Add buttons to printer-tronxy-x5s-2018.cfg
Reported by @blackyarr.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:09:30 -05:00
Douglas Hammond b6589406d4 temperature_sensor: Add generic temperature sensor support
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-26 13:15:56 -05:00
Douglas Hammond 3887ad4fce heater: Support generic gcode_id registration for sensors
Support reading a "gcode_id" parameter from heater/sensor config
sections.

Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-26 12:07:00 -05:00
Arksine f7d8854587 bed_mesh: simplify configuration
The 'bed_shape' option has been removed.  The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'.  When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-02-25 13:34:14 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-24 00:49:47 -05:00
Kevin O'Connor 834b9e3d92 config: Warn that cycle_time may not match when using hardware_pwm
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-19 13:19:32 -05:00
Kevin O'Connor cc4ecef88b mcp4018: Add initial support for the mcp4018 digipot
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-16 08:16:37 -05:00
nopbit 0f674ef407 tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132)
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.

Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
2019-02-14 10:13:48 -05:00
KevinOConnor c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater
Generic Heater Support
2019-02-14 10:08:26 -05:00
John Jardine 6316b2c1b6 Generic Heater Support
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
2019-02-14 01:15:11 +00:00
Boffgithub a03e31809f config: Example config file for a stock 250mm build VORON2 printer
Example config file for a stock 250mm build VORON2 printer that
matches the manual diagrams exactly for the controller layout and pins
used.

Signed-off-by: Ben Warren <boffdroid@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 12:07:20 -05:00
Kevin O'Connor 98ed462865 spi_software: Implementation of software spi
Signed-off-by: Matt Janus <FragginRight@variabl.es>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 11:52:20 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:38:13 -05:00
AxMod 3D Print cd6a181429 config: Azteeg X5 mini config (#1193)
Signed-off-by: Ax Smith-Laffin <ax@darknetweb.co.uk>
2019-02-08 15:00:23 -05:00
Kevin O'Connor 161cde4c5c config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
Marlin examples use the "ATC Semitec 104GT-2" thermistor for the CR10,
CR10S, and CR10mini.  Reported by @dovcharov.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-08 12:20:16 -05:00
Kevin O'Connor 6c10e4bcef config: Update generic-fysetc-f6.cfg display section
Reported by @bruce356 and @nandinho84.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-07 18:23:17 -05:00
Tschipel 33c6c8b803 config: Update generic-bigtreetech-skr-v1.1 (#1209)
Add "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays

Signed-off-by: Mario Frost <waschbaerbauch75@ist-einmalig.de>
Co-Authored-By: Jens <malgangda@users.noreply.github.com>
2019-02-07 18:16:07 -05:00
Kevin O'Connor 345a5f4e1f bltouch: Increase default pin_move_time from 200ms to 675ms
Use the same pin move time that Marlin uses.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-04 18:02:53 -05:00
Arksine cdcc320710 bed_mesh: add support for round beds
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2019-02-02 23:29:00 -05:00
Arksine 893cbbab83 pause_resume: update documentation
Add updates to example-extras.cfg and G-Codes.md documenting pause_resume.  Also add M600 (filament change) to sample-macros.cfg.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2019-01-28 11:23:52 -05:00
Ales Stimec 0d4544e72a config: Added example config file for Geeetech gt2560 controller.
Signed-off-by: Ales Stimec <ales.stimec@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-28 11:20:01 -05:00
Kevin O'Connor 7327394c50 adc_temperature: Add support for linear interpolation of resistances
Add support for performing linear interpolation between a set of
measured temperature/resistance pairs.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-21 21:28:25 -05:00
Kevin O'Connor 8a97bc592b bltouch: Add a pin_up_touch_mode_reports_triggered config option
Rework the undocumented test_sensor_pin config option into a
pin_up_touch_mode_reports_triggered option and document it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-21 09:52:11 -05:00
Kevin O'Connor e36122797b bltouch: Attempt to verify that the probe raises after each probe attempt
Query the bltouch state during the pin_up command to try and verify
that the probe does actually retract.  This may be useful to detect if
the bltouch enters into an "error" state.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-21 09:52:11 -05:00
Rui Caridade 275df53b2e config: Generic board BIGTREETECH SKR V1.1 config
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-16 09:40:15 -05:00
Master92 a27838bc05 controller_fan: Add support for a fan cooling the controller-board (#1070)
Whenever a stepper driver or a heater becomes active, it is desirable to turn on a fan cooling the associated parts on the controller board. This module implements such a fan that turns on whenever a stepper or specified heater turns on, decelerates to a configurable speed when all of the watched parts turn off, and returns to an off-speed, when a user-defined timeout is met.

Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
2019-01-10 12:12:15 -05:00
SimoneBnc 15da5cc5aa config: Create generic-fysetc-f6.cfg
This is my current config file for Fysect F6 + TMC2208 running on my
Ender 3 with stock creality display.

Signed-off-by: Simone Bonacini <bonacini.simone@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-10 09:55:54 -05:00
Janar Sööt 0cbe851777 menu: enhancements
- changes that make easier to use menu as module UI
- new helper method for delayed callbacks
- method for getting the menu instance from display
- new action for sending menu:action events
- allow_without_selection option for cards

Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-01-07 21:39:50 -05:00
Janar Sööt 005cbe157a menu: allow names in card content and simplify define single card decks
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-01-07 21:38:53 -05:00
Janar Sööt b9cccc5959 menu: support for click button long press
- long press with timer (button release is not needed anymore)
- initial support for edit mode long press gcode

Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-01-07 21:38:45 -05:00
Kevin O'Connor e26d1a3567 i2ccmds: Pass the i2c address as a 7-bit number (0-127)
The sam3 i2c code and the linux code use a 7-bit i2c address, while
the avr, lpc176x, and samd21 i2c code uses an 8-bit address with the
least significant bit always zero.  A similar issue occurred in the
host code (sx1509.py and replicape.py use 7-bit addresses while
uc1701.py and mcp4451.py use 8-bit addresses).

Consistently use 7-bit addresses in all the code.  This breaks
compatibility between host and mcu software, so make a change to the
config_i2c command to force users to synchronize software updates.
This also breaks common Smoothieboard configs, so update the mcp4451
code to validate the i2c_address.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 20:00:44 -05:00
Yannic Schröder d015209388 docs: Add guide for sensorless homing (#1004)
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
2019-01-07 10:39:16 -05:00
Kevin O'Connor fac2d7817c config: Update sample-probe-as-z-endstop.cfg to use set_position_z=0
It's confusing to use a non-zero set_position_z as an example.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-07 10:26:04 -05:00
Patrick Balsiger bd410c22f7 config: pin mapping for ender 3 stock display and encoder on ramps (#1075)
Signed-off-by: Patrick Balsiger <patrick.balsiger@wirelos.net>
2019-01-06 11:51:27 -05:00
Master92 d0b1b23c9b config: Add default kill_pin to RAMPS' display-section
Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
2019-01-05 19:07:02 -05:00
Kevin O'Connor c2086796bf mcp4728: Add initial support for the mcp4728 i2c dac chip
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-02 18:17:56 -05:00
Graham Ambrose 0da064ccd9 config: Added encoder pins to radds example config
Signed-off-by: Graham Ambrose <graham.ambrose@gmail.com>
2019-01-02 17:46:06 -05:00
Alec B. Plumb 59e9b6562f respond: An extra for sending messages to the printer host. (#1053)
I have made one change to `gcode.py` to support quoted parameter
values.

I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.

Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
2019-01-02 17:45:35 -05:00
Kevin O'Connor 5dc74f3152 winch: Add experimental support for cable winch kinematics
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
Kevin O'Connor ec9cb3a1b3 polar: Experimental support for polar kinematics
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-24 11:38:59 -05:00
Kevin O'Connor a5cb74d58d config: Add a generic-minitronics1.cfg example config file
Information provided by @BKLronin.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-20 11:09:20 -05:00
Kevin O'Connor e820ea3141 config: Add printer-micromake-d1-2016.cfg example config file
Reported by IRC user "Xantos".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-18 20:59:43 -05:00
Kevin O'Connor 531575651c bltouch: Document that bltouch "clones" may not work correctly
There is concern that the bltouch.py module may not perform adequately
on some bltouch "clones".  Document that.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-18 17:12:44 -05:00
Kevin O'Connor ccc25a03d5 bltouch: Add a config option to disable the bltouch sensor test
It appears some bltouch "clones" do not report the probe as triggered
when put in "touch mode" while the pin is raised.  Add a config option
to allow users to disable the test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-16 11:06:41 -05:00
Uri Shaked 79d65d8ead config: Fix CR-20 click pin polarity
Signed-off-by: Uri Shaked <uri@urishaked.com>
2018-12-15 18:38:03 -05:00
Uri Shaked cc4227aec8 config: Add printer config for the CR-20 by Creality3D
Signed-off-by: Uri Shaked <uri@urishaked.com>
2018-12-15 17:42:23 -05:00
TronskiFPV ef4f84e3ae config: Update printer-creality-ender3-2018.cfg (#959)
Added options necessary for basic extruder calibration expected of a new install. Fixed bed size to correct 235x235. Removed 0.5 position_endstop setting as this crashes hot end into the bed on stock Ender 3's.

Signed-off-by: Troy nadeau <troyboy162@hotmail.com>
2018-12-05 16:43:14 -05:00
Kevin O'Connor 44aa5def73 bltouch: Allow the pin_move_time to be configured
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-12-04 10:34:54 -05:00
Arksine 581b1439f3 config: Update bed_mesh in example-extras.cfg
Update documentation about the fade options. Also inform the user that it is recommended to home toward the center of the print area when using a probe for z homing.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-11-30 11:37:21 -05:00
Kevin O'Connor 824e55d75a bltouch: Add initial support for a bltouch "extras" module
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:34:20 -05:00
Kevin O'Connor f01ced8ed4 config: Rework sample-bltouch.cfg into sample-probe-as-z-endstop.cfg
The example configuration information is more useful for general probe
as z_endstop than as a bltouch example.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-30 11:34:20 -05:00
ruevs b8f92c73ed config: Make the Anycubic delta configurations as similar as possible
Signed-off-by: Peter Ruevski <dpr@ruevs.com>
2018-11-25 17:14:16 -05:00
Kevin O'Connor 147d805231 mcp4451: Use bus.py helper code for i2c
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-24 00:33:22 -05:00
Kevin O'Connor e5150fe187 uc1701: Add support for SSD1306 in i2c mode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-23 22:04:06 -05:00
Kevin O'Connor e231ac7422 uc1701: Add support for SSD1306 displays
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-21 20:45:53 -05:00
Kevin O'Connor 9ba94ded9e tmc2660: Use bus.py helper code for spi
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-21 12:12:31 -05:00
Jiri Dobry e541466591 servo: This patch create ability to enable/disable attached servo. (#880)
Cheap mechanical servos have small flickering. When this servo stay on one position, this flickering slowly destroy internal potentiometer and make servo unusable. Many mechanisms need servo only to change position. Therefore I create this minor path to enable/disable servo. It stop pulses for this servo, that's all.

Corresponding G-code is:
SET_SERVO SERVO=config_name [WIDTH=] [ENABLE=<0|1>]
SET_SERVO SERVO=config_name [ANGLE=] [ENABLE=<0|1>]

For example:
SET_SERVO SERVO=touch ANGLE=80 ENABLE=1 ; enable servo and set position
G4 P200 ; wait 200ms
SET_SERVO SERVO=touch ENABLE=0 ; disable servo

This patch add one option to servo configuration:
enable: <False/True> # default True

It not have impact to user code existing already because it is optional parameter and default value is same as original behavior.

Signed-off-by: Jiri Dobry <jdobry@centrum.cz>
2018-11-14 09:38:09 -05:00
Kevin O'Connor 077280bb62 config: Use consistent advice on flashing the Melzi board
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 14:32:52 -05:00
ndupont-net ccb660a0ea config: sample-macros.cfg creation and M300
Implementation of M300 "Play Tone"

Signed-off-by: Nicolas Dupont <ndupont@ndupont.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 12:42:10 -05:00
Kevin O'Connor 22f7be8b74 config: Add printer-velleman-k8200-2013.cfg example config
Based on config from @PerLangkjaer.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 10:46:57 -05:00
Florian Heilmann 3da7697c66 config: Add generic duet2 config and tests (#834)
This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-31 09:58:43 -04:00
Florian Heilmann 4372d1812c Implement idle event support in the TMC2660 extra
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-28 18:45:49 -04:00
Kevin O'Connor 37b9a2442f config: Add lcd encoder pins to generic-rumba.cfg
Reported by @elJosho.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-28 14:34:22 -04:00
Florian Heilmann f57c29442c Add SX1509 extra
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-27 10:34:28 -04:00
Kevin O'Connor 24bbc43fd0 config: Add encoder pins to printer-anycubic-kossel-plus-2017.cfg
Reported by @obalado.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 21:34:49 -04:00
Kevin O'Connor 97590b8e0b extruder: Don't use max_extrude_cross_section in max_extrude_only defaults
Some users increase max_extrude_cross_section to avoid issues with
some slicers.  However, increasing that value also increases the
defaults for the max_extrude_only parameters which is not obvious.
Base the max_extrude_only defaults only on the configured nozzle
diameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
Kevin O'Connor ed13c5733d config: Update wording of extruder parameters in example.cfg
Try to improve the description of the extruder config limits.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
Florian Heilmann b6bf455155 tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816)
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-24 16:01:12 -04:00
Kevin O'Connor 7fac0de1f8 config: Add display buttons to printer-creality-cr10s-2017.cfg
Reported on IRC by gueee.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-20 19:27:53 -04:00
Jason Rahaim c7f0d039ac config: ADIMlab Add support for LCD knob and caselight
Signed-off-by: Jason Rahaim <jason@jasonr.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-19 11:10:32 -04:00
Kevin O'Connor 1e71909d02 endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
Kevin O'Connor def524bdf4 endstop_phase: Add support for detecting phase via TMC stepper drivers
The Trinamic stepper motor drivers are capable of reporting the
stepper phase - add support for using that capability to the
enddstop_phases module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Kevin O'Connor a2df01b88e endstop_phase: Move endstop phase homing code to new "extras" module
Move the endstop phase tracking code from stepper.py to a new
extras/endstop_phase.py module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Jason R dd5695405f config: Add ADIMLab 3d printer (#781)
Configuration for ADIMLab printer. tested and working including LCD support. 

This printer was previously known as the HCmaker7

Signed-off-by: Jason Rahaim <jason@jasonr.com>
2018-10-16 12:07:47 -04:00
Kevin O'Connor f7a7223b30 cartesian: Use homing_speed for homing retract speed
Commit b0d859f2 introduced a second_homing_speed parameter, and it
also changed the retract speed.  Revert the retract speed change (use
homing_speed when the head retracts).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:17:39 -04:00
Chris Whiteford c5d94a74a5 servo: Adding support for startup value for servos (#676)
Signed-off-by: Chris Whiteford <github@chrisandtennille.com>
2018-10-05 14:35:38 -04:00
Chris Whiteford b0d859f220 stepper: Adding support for a second_homing_speed parameter (#677)
Signed-off-by: Chris Whiteford <chris@chrisandtennille.com>
2018-10-04 18:55:58 -04:00
LazaroFilm 822616ae7f docs: Spelling error corrected in bed mesh comment (#735)
The comment for the algorithm setting had a spelling error, it said:
[...]May be either "langrange"[...]
Removed the n.

Signed-off-by: Victor Lazaro <lazarofilm@gmail.com>
2018-10-04 12:48:27 -04:00
Kevin O'Connor 1940ba7062 config: Minor indentation fix to comments in example-extras.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor a698aef29b config: Note probe activate/deactivate must not move the toolhead
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor c5d4e14298 probe: Infer position_endstop when using probe:z_virtual_offset
Don't require (or permit) the user to specify a stepper_z
position_endstop when using the probe:z_virtual_offset mechanism.  In
that case the position_endstop should always equal the probe's
z_offset - so no need to have the user specify it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 31ec098577 config: The delta_calibrate bed radius uses nozzle coordinates
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 348a41c325 bed_tilt: Remove special probe:z_virtual_endstop handling
Remove the code to calculate and track the z_offset via
position_endstop updates.  It's simpler to always save and restore the
calculated z_adjust.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor 33887b8c39 probe: Support manual probing at runtime
Don't require the config file to specify manual probing.  Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
Kevin O'Connor d05aa81927 avr: Use generic usb_cdc code for usb serial support
Use the generic usb_cdc driver code instead of the "pjrc" usb driver
code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-30 22:55:21 -04:00
Nikolai Ugelvik 50a8efe0a5 config: Add encoder and click pins for CR-10 mini
Signed-off-by: Nikolai Ugelvik <nikolaiu@gmail.com>
2018-09-30 12:52:06 -04:00
Kevin O'Connor b112cac47a config: Fix typo in gcode_macro default_parameter description
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-30 12:11:07 -04:00
Janar Sööt 68dc28580f gcode_macro: default parameter values
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-30 11:53:10 -04:00
Kevin O'Connor cf79b3c342 config: Note gcode_macro string formatting in example-extras.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-26 08:25:44 -04:00
Kevin O'Connor 439f6684be config: Move some sections around in example-extras.cfg
Move the quad_gantry_level description closer to z_tilt section.  Move
the force_move section closer to the homing_override section.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-26 08:16:40 -04:00
Kevin O'Connor 95392595f6 config: Wanhao Duplicator 6 likely does not need "restart: command"
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 14:29:05 -04:00
Janar Sööt 5144c5f01e menu: new fast step rate feature
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-09-21 19:29:30 -04:00
Kevin O'Connor 174754299a heater: Add new TURN_OFF_HEATERS command
Add a command that will turn off all heaters in the printer.  Run this
command in the default idle_timeout action.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-18 16:01:07 -04:00
Clifford Raccani 67c6234907 config: Add printer-wanhao-duplicator-6-2016.cfg
Signed-off-by: Cliff Raccani <bramhall45@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-16 19:52:41 -04:00
Kevin O'Connor 32b763efb1 config: Fix generic-re-arm.cfg encoder pins
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 14:43:10 -04:00
Kevin O'Connor d459ae648d config: Update generic-re-arm.cfg with menu buttons
Reported by @J-charles-C.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 09:07:50 -04:00
Maks Zolin e3a49dc692 quad_gantry_level: Add gantry leveling (ruled hyperbolic parabola correction) (#631)
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2018-09-12 08:33:20 -04:00
Boffgithub 0c0087ce42 config: Update example-extras.cfg (#641)
Just correcting a couple of spelling errors I noticed.

Signed-off-by: Ben Warren <boffdroid@gmail.com>
2018-09-12 08:13:12 -04:00