Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

config: Minor indentation fix to comments in example-extras.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-09-26 19:50:56 -04:00 committed by KevinOConnor
parent a698aef29b
commit 1940ba7062
1 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
config/example-extras.cfg
View File

@ -59,11 +59,11 @@
# g-code command that may be used to calibrate appropriate x and y
# adjustment parameters.
#points:
# A list of X,Y coordinates (one per line; subsequent lines
# indented) that should be probed during a BED_TILT_CALIBRATE
# command. Specify coordinates of the nozzle and be sure the probe
# is above the bed at the given nozzle coordinates. The default is
# to not enable the command.
# A list of X,Y coordinates (one per line; subsequent lines
# indented) that should be probed during a BED_TILT_CALIBRATE
# command. Specify coordinates of the nozzle and be sure the probe
# is above the bed at the given nozzle coordinates. The default is
# to not enable the command.
#speed: 50
# The speed (in mm/s) of non-probing moves during the
# calibration. The default is 50.
@ -147,16 +147,16 @@
# extended G-Code command becomes available.
#[z_tilt]
#z_positions:
# A list of X,Y coordinates (one per line; subsequent lines
# indented) describing the location of each Z stepper. The first
# entry corresponds to stepper_z, the second to stepper_z1, the
# third to stepper_z2, etc. This parameter must be provided.
# A list of X,Y coordinates (one per line; subsequent lines
# indented) describing the location of each Z stepper. The first
# entry corresponds to stepper_z, the second to stepper_z1, the
# third to stepper_z2, etc. This parameter must be provided.
#points:
# A list of X,Y coordinates (one per line; subsequent lines
# indented) that should be probed during a Z_TILT_ADJUST
# command. Specify coordinates of the nozzle and be sure the probe
# is above the bed at the given nozzle coordinates. This parameter
# must be provided.
# A list of X,Y coordinates (one per line; subsequent lines
# indented) that should be probed during a Z_TILT_ADJUST command.
# Specify coordinates of the nozzle and be sure the probe is above
# the bed at the given nozzle coordinates. This parameter must be
# provided.
#speed: 50
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.