Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
2,551 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

2551 Commits

Author SHA1 Message Date
Kevin O'Connor 0b90337d59 config: Minor updates to printer-lulzbot-mini1-2016.cfg 
Add to printers.test test case.  Don't disable the
max_extrude_cross_section check by default (users should verify they
want that safety feature off).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-05 10:57:47 -05:00
Martin 51cf244617 config: Create printer-lulzbot-mini1-2016.cfg (#2129) 
Signed-off-by: Martin van Es <martin@mrvanes.com>
 2019-11-05 10:54:23 -05:00
Kevin O'Connor c11e4b74c2 config: Minor updates to printer-creality-cr20-pro-2019.cfg 
Don't specify a default for pressure_advance.  Don't specify values
that are already at their default.  Add to printers.test test case.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-05 10:50:19 -05:00
bskp 0cd808cfde config: Added config for Creality CR-20 Pro (#2135) 
Based on the configuration for the CR20-2018.
Added support for BLtouch, save z-homing and
automatic bed leveling.

Signed-off-by: Matthias Roggo <bskp@posteo.ch>
 2019-11-05 10:47:03 -05:00
clearchris 009d14fc3e stm32: adc for new stm32f0 common code (#2120) 
Derived from stm32/adc.c and stm32f0/adc.c with additional changes.

Tested on Monoprice Mini Delta (malyan) stm32f070xb board.

Signed-off-by: Chris Lombardi <clearchris@hotmail.com>
 2019-11-05 10:08:32 -05:00
Kevin O'Connor cf6e8a2eee stm32: Define PGx pins on stm32f103 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-02 11:35:27 -04:00
Kevin O'Connor 430ad0b658 virtual_sdcard: Only return from M25 after print confirmed paused 
Wait in the M25 command handler until the work_handler() background
timer fully exits.  This ensures that subsequent g-code commands (such
as M27 or M24) will correctly report a paused state.

Reported by @foosel.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-31 11:36:35 -04:00
Kevin O'Connor 40e2c64c82 clocksync: Fix typo in pause() call at connect time 
The initial clock measurement wasn't properly implementing a small
delay between clock queries.  Fix the pause() call so there is a small
delay between queries.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-31 11:36:35 -04:00
Kevin O'Connor 739583a21b test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 12:46:03 -04:00
radensb dcedd84fe1 config: Lulzbot TAZ6 w/ Dual v3 Toolhead Config (#2111) 
Signed-off-by: Ryan Densberger <magshooterz@gmail.com>
 2019-10-30 12:37:22 -04:00
Kevin O'Connor e2f5e2871c docs: Recommend OctoPrint v1.3.12 in Installation.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 11:02:03 -04:00
Kevin O'Connor d65f2e2861 docs: Minor cleanup to square_tower.scad 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-27 12:16:17 -04:00
Kevin O'Connor 43453131ac config: Only document thermistors in example.cfg 
Move the common temperature amplifier config descriptions to
example-extras.cfg.

Also, minor changes to wording of some example-extra.cfg sections.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-27 12:03:59 -04:00
Kevin O'Connor 1a69f38e6e flash_usb: Pass -t $CONFIG_MCU to flash_usb on all targets 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 18:48:00 -04:00
Kevin O'Connor 538d6ac3a2 flash_usb: Use "-s" option to specify flash offset on atsamd 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 18:33:00 -04:00
Kevin O'Connor c694da3753 flash_usb: Change dfu-util to reset the board after a flash on stm32f4 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 18:06:32 -04:00
Kevin O'Connor 4b4e309e1b flash_usb: Inform user to manually reset after stm32f4 flash 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 17:46:18 -04:00
Kevin O'Connor 5131ec5eb0 stm32: Add support for flashing over usb on stm32f042 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 17:11:04 -04:00
Kevin O'Connor 2ecc8d8f62 stm32: stm32f4 usb boot check only needed when CONFIG_USBSERIAL 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 16:56:33 -04:00
Kevin O'Connor 5da6a62759 stm32f4: Add support for flashing over USB 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 13:24:59 -04:00
Kevin O'Connor 0ba5819370 tmc_uart: Don't try to configure analog pins to -1 value 
Commit 6f5f2a3b incorrectly altered the analog mux pin config.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-26 11:33:30 -04:00
Kevin O'Connor 081c24326d atsam: sysio support is only available on sam4s 
Fix sam4e build error introduced in commit f723a314.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-24 22:21:47 -04:00
Kevin O'Connor f723a3141e atsam: Allow PB4-PB7,PB10-PB12 to be used as gpio on sam4 
A separate "sysio" register must be set in order to use some port B
pins on the sam4 mcu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-24 22:02:29 -04:00
Kevin O'Connor 6f5f2a3bc7 tmc_uart: Make sure to set analog mux pins after a restart 
Don't assume the analog mux pins are in a low state at startup.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-24 22:00:58 -04:00
Kevin O'Connor d6d2be66e4 config: The duet2 maestro uses a 2200 ohm pullup resistor 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-24 13:07:07 -04:00
Kevin O'Connor 9a11286327 stm32: Implement armcm_main() in arch specific code 
Move armcm_main() to stm32f0.c, stm32f1.c, and stm32f4.c.  This gives
the arch specific code more control on the early boot setup.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-24 11:35:18 -04:00
Kevin O'Connor faeaa54925 armcm_boot: Use armcm_main() instead of main() to start board code 
The main() function has a special meaning to gcc and using it can
result in different code generation.  Use armcm_main() to avoid that.

Also, invoke SystemInit() from the board specific armcm_main() code.
This gives the board code more control over board initialization.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-24 11:16:10 -04:00
Kevin O'Connor 632ff9e55a docs: Update benchmarks for stm32f0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:45:07 -04:00
Kevin O'Connor 0b0c47c566 stm32: Support PA11/PA12 pin remap on stm32f042 tsop20 chip 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:34:48 -04:00
Kevin O'Connor a6d90bb95e stm32: Support stm32f042 build from stm32/ directory 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:34:48 -04:00
Kevin O'Connor 2c535106ee stm32: Initial support for stm32f070 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:19:03 -04:00
Kevin O'Connor 7e090a996a lib: Add a copy of stm32f0 cmsis files from v1.10.0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:16:35 -04:00
Kevin O'Connor 7b792e40d5 stm32f0: Rename internal build symbol from MACH_STM32F0 to MACH_STM32F0_HAL 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:16:35 -04:00
Kevin O'Connor a46244057c stm32: Support 16bit packet memory access on usbfs controller 
The stm32f0 line uses 16bit packet memory reads/writes (as opposed to
the goofy 32bit accesses required on the stm32f103).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:16:35 -04:00
Kevin O'Connor c2881f7d15 stm32: Be explicit in layout of gpio banks in digital_regs variable 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:16:35 -04:00
Kevin O'Connor f160a3a824 docs: Reword Pressure_Advance.md paragraph on kinematic impact 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:50:51 -04:00
Kevin O'Connor ccbdb6c531 docs: Pressure_Advance.md should recommend setting ADVANCE_LOOKAHEAD_TIME 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:34:59 -04:00
Kevin O'Connor c794e11c67 docs: Update Pressure_Advance.md to use tuning tower 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:28:03 -04:00
Kevin O'Connor b8a6160646 docs: Update example openocd config in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:05:04 -04:00
Kevin O'Connor f07292084b docs: Remove outdated stm32f1.md document 
The stm32f103 has become popular in the "skr mini" series of boards.
As a result, the stm32f1.md document is no longer relevant.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 18:53:11 -04:00
Kevin O'Connor e0afc74cc7 config: Fix EXP1 comment in generic-bigtreetech-skr-e3-dip.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 16:07:08 -04:00
Kevin O'Connor b91993d6a4 config: Add generic-bigtreetech-skr-e3-dip.cfg config 
Reported by @salimvanak.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:59:26 -04:00
Kevin O'Connor 40d076cce5 stm32: Use stm32f103xe header for stm32f103 line 
Use the "e" revision so that the SPI3 device is available for use.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:49:00 -04:00
Kevin O'Connor ef142af785 config: Rename config to generic-bigtreetech-skr-mini-e3-v1.0.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:04:15 -04:00
Kevin O'Connor 48530db50e test: Add generic-bigtreetech-skr-mini-e3-v1.2.cfg to config tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:01:34 -04:00
epandi c7fe338bfb config: Skr mini e3 v1.2 template (#2069) 
Signed-off-by: Eelco Pandelaar <epandi@gmail.com>
 2019-10-23 14:57:00 -04:00
nhchiu 9cd6273d52 scripts: Use current username in install-ubuntu-18.04.sh 
Set KLIPPER_USER to $USER instead of "octoprint".

Signed-off-by: Nathan Chiu <nhchiu2009@gmail.com>
 2019-10-23 14:54:31 -04:00
Arksine dd12c981ef temperature_fan: add get_status() function 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-10-22 22:10:13 -04:00
Arksine d85b395a9c bed_mesh: fix error reporting 
Fix invalid string formatting in the parse_pair() helper.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-10-22 22:09:33 -04:00
Kevin O'Connor abdfd92e99 docs: Update release notes for v0.8.0 release 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-21 22:30:04 -04:00