mirror of https://github.com/Desuuuu/klipper.git
config: Create printer-lulzbot-mini1-2016.cfg (#2129)
Signed-off-by: Martin van Es <martin@mrvanes.com>
This commit is contained in:
Martin
KevinOConnor
parent
c11e4b74c2
commit
51cf244617
|
|
@ -0,0 +1,215 @@
|
|||
#This file contains pin mappings for the Lulzbot Mini 1 using RAMBo Mini and SingleExtruder
|
||||
#To use this config, the firmware should be compiled for the AVR atmega2560.
|
||||
|
||||
# See the example.cfg file for a description of available parameters.
|
||||
|
||||
#-------------------------------------------------------------------------------------------------
|
||||
# LULZBOT Mini 1 SingleExtruder (RAMBoMini)
|
||||
# defines are copied from Marlin pins_MINIRAMBO.h
|
||||
# pin conversion was found in fastio_1280.h
|
||||
#-------------------------------------------------------------------------------------------------
|
||||
[stepper_x]
|
||||
#define X_STEP_PIN 37
|
||||
step_pin: PC0
|
||||
#define X_DIR_PIN 48
|
||||
dir_pin: PL1
|
||||
#define X_ENABLE_PIN 29
|
||||
enable_pin: !PA7
|
||||
# 1/100
|
||||
step_distance: .010000
|
||||
#define X_MIN_PIN 12
|
||||
endstop_pin: ^!PB6
|
||||
position_endstop: -3
|
||||
position_min: -3
|
||||
position_max: 159
|
||||
homing_speed: 50
|
||||
homing_retract_dist: 2.0
|
||||
second_homing_speed: 5
|
||||
|
||||
[stepper_y]
|
||||
#define Y_STEP_PIN 36
|
||||
step_pin: PC1
|
||||
#define Y_DIR_PIN 49
|
||||
dir_pin: !PL0
|
||||
#define Y_ENABLE_PIN 28
|
||||
enable_pin: !PA6
|
||||
# 1/100
|
||||
step_distance: .010000
|
||||
#define Y_MIN_PIN 11
|
||||
endstop_pin: ^!PB5
|
||||
position_endstop: -7
|
||||
position_min: -7
|
||||
position_max: 173
|
||||
homing_speed: 50
|
||||
homing_retract_dist: 2.0
|
||||
second_homing_speed: 5
|
||||
|
||||
[stepper_z]
|
||||
#define Z_STEP_PIN 35
|
||||
step_pin: PC2
|
||||
#define Z_DIR_PIN 47
|
||||
dir_pin: PL2
|
||||
#define Z_ENABLE_PIN 27
|
||||
enable_pin: !PA5
|
||||
# 1/1600
|
||||
step_distance: 0.000625
|
||||
#define Z_MAX_PIN 23
|
||||
endstop_pin: ^!PA1
|
||||
# I have replaced the original nozzle with
|
||||
# a hardened steel one that make the extruder
|
||||
# 1-1.5mm longer, so this may be a little too low
|
||||
position_endstop: 161.5
|
||||
position_max: 161.5
|
||||
position_min: -2.0
|
||||
homing_speed: 7
|
||||
homing_retract_dist: 2.0
|
||||
second_homing_speed: 2
|
||||
|
||||
[extruder]
|
||||
#define E0_STEP_PIN 34
|
||||
step_pin: PC3
|
||||
#define E0_DIR_PIN 43
|
||||
dir_pin: !PL6
|
||||
#define E0_ENABLE_PIN 26
|
||||
enable_pin: !PA4
|
||||
# 1/833
|
||||
step_distance: 0.001200480192076831
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 2.850
|
||||
#define HEATER_0_PIN 3
|
||||
heater_pin: PE5
|
||||
#The Extruder uses 100K thermistor - ATC Semitec 104GT-2 (#5) and PID control
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
# I can't explain this from Marlin
|
||||
sensor_pin: PF0
|
||||
control: pid
|
||||
pid_Kp: 28.79
|
||||
pid_Ki: 1.91
|
||||
pid_Kd: 108.51
|
||||
min_temp: 0
|
||||
max_temp: 280
|
||||
min_extrude_temp: 160
|
||||
max_extrude_cross_section: 8
|
||||
max_extrude_only_velocity: 500
|
||||
max_extrude_only_accel: 2000
|
||||
# pressure_advance: 0.1
|
||||
# pressure_advance_lookahead_time: 0.010
|
||||
|
||||
[heater_bed]
|
||||
#define HEATER_BED_PIN 4
|
||||
heater_pin: PG5
|
||||
# The Heater Bed uses Honeywell 100K 135-104LAG-J01 temp sensor (#7) and PID control
|
||||
sensor_type: Honeywell 100K 135-104LAG-J01
|
||||
# I can't explain this from Marlin
|
||||
sensor_pin: PF2
|
||||
control: pid
|
||||
pid_Kp: 294.0
|
||||
pid_Ki: 65.0
|
||||
pid_Kd: 382.0
|
||||
min_temp: 0
|
||||
max_temp: 130
|
||||
|
||||
[fan]
|
||||
#define FAN_PIN 8
|
||||
pin: PH5
|
||||
|
||||
[heater_fan nozzle_cooling_fan]
|
||||
#define FAN1_PIN 6
|
||||
pin: PH3
|
||||
|
||||
[output_pin stepper_xy_current]
|
||||
#define MOTOR_CURRENT_PWM_XY_PIN 46
|
||||
pin: PL3
|
||||
pwm: True
|
||||
scale: 2.0
|
||||
cycle_time: .000030
|
||||
hardware_pwm: True
|
||||
static_value: 1.300
|
||||
|
||||
[output_pin stepper_z_current]
|
||||
pin: PL4
|
||||
pwm: True
|
||||
scale: 2.0
|
||||
cycle_time: .000030
|
||||
hardware_pwm: True
|
||||
static_value: 1.630
|
||||
|
||||
[output_pin stepper_e_current]
|
||||
pin: PL5
|
||||
pwm: True
|
||||
scale: 2.0
|
||||
cycle_time: .000030
|
||||
hardware_pwm: True
|
||||
static_value: 1.250
|
||||
|
||||
[static_digital_output stepper_config]
|
||||
# Microstepping pins
|
||||
#define X_MS1_PIN 40
|
||||
#define X_MS2_PIN 41
|
||||
#define Y_MS1_PIN 69
|
||||
#define Y_MS2_PIN 39
|
||||
#define Z_MS1_PIN 68
|
||||
#define Z_MS2_PIN 67
|
||||
#define E0_MS1_PIN 65
|
||||
#define E0_MS2_PIN 66
|
||||
pins:
|
||||
PG1, PG0,
|
||||
PK7, PG2,
|
||||
PK6, PK5,
|
||||
PK3, PK4
|
||||
|
||||
[static_digital_output yellow_led]
|
||||
#define LED_PIN 13
|
||||
pins: !PB7
|
||||
|
||||
[mcu]
|
||||
serial: /dev/ttyACM0
|
||||
|
||||
[printer]
|
||||
kinematics: cartesian
|
||||
max_velocity: 300
|
||||
max_accel: 2000
|
||||
max_z_velocity: 7
|
||||
max_z_accel: 500
|
||||
|
||||
[homing_override]
|
||||
gcode:
|
||||
G91
|
||||
G28 Z
|
||||
G0 Z-5
|
||||
G28 X Y
|
||||
G0 X3 Y7
|
||||
G90
|
||||
|
||||
[probe]
|
||||
#define Z_MIN_PROBE_PIN 10
|
||||
pin: ^!PB4
|
||||
# z_offset equals washer thickness ~= 1.377
|
||||
z_offset: 1.377
|
||||
speed: 5.0
|
||||
samples: 2
|
||||
sample_retract_dist: 1.0
|
||||
samples_result: average
|
||||
samples_tolerance: 0.200
|
||||
samples_tolerance_retries: 2
|
||||
|
||||
[bed_tilt]
|
||||
# Enable bed tilt measurments using the probe we defined above
|
||||
# Probe points using X0 Y0 offsets @ 0.01mm/step
|
||||
points: -2,-6
|
||||
156,-6
|
||||
156,158
|
||||
-2,158
|
||||
speed: 75
|
||||
horizontal_move_z: 2
|
||||
|
||||
[firmware_retraction]
|
||||
retract_length: 2
|
||||
retract_speed: 200
|
||||
unretract_extra_length: 0
|
||||
unretract_speed: 200
|
||||
|
||||
[gcode_macro G29]
|
||||
# Preform the ABL by running G29 in the start GCODE script
|
||||
gcode:
|
||||
BED_TILT_CALIBRATE
|
||||
Loading…
Reference in New Issue