stm32: adc for new stm32f0 common code (#2120)

Derived from stm32/adc.c and stm32f0/adc.c with additional changes.

Tested on Monoprice Mini Delta (malyan) stm32f070xb board.

Signed-off-by: Chris Lombardi <clearchris@hotmail.com>
This commit is contained in:
clearchris 2019-11-05 09:08:32 -06:00 committed by KevinOConnor
parent cf6e8a2eee
commit 009d14fc3e
4 changed files with 144 additions and 3 deletions

View File

@ -6,7 +6,7 @@ config STM32_SELECT
bool
default y
select HAVE_GPIO
select HAVE_GPIO_ADC if !MACH_STM32F0
select HAVE_GPIO_ADC
select HAVE_GPIO_I2C if !MACH_STM32F0
select HAVE_GPIO_SPI
select HAVE_GPIO_BITBANGING

View File

@ -26,12 +26,13 @@ src-y += stm32/watchdog.c stm32/gpio.c generic/crc16_ccitt.c
src-y += generic/armcm_boot.c generic/armcm_irq.c generic/armcm_reset.c
src-$(CONFIG_MACH_STM32F0) += ../lib/stm32f0/system_stm32f0xx.c
src-$(CONFIG_MACH_STM32F0) += generic/timer_irq.c stm32/stm32f0_timer.c
src-$(CONFIG_MACH_STM32F0) += stm32/stm32f0.c
src-$(CONFIG_MACH_STM32F0) += stm32/stm32f0.c stm32/stm32f0_adc.c
src-$(CONFIG_MACH_STM32F1) += ../lib/stm32f1/system_stm32f1xx.c
src-$(CONFIG_MACH_STM32F1) += stm32/stm32f1.c generic/armcm_timer.c
src-$(CONFIG_MACH_STM32F1) += stm32/adc.c
src-$(CONFIG_MACH_STM32F4) += ../lib/stm32f4/system_stm32f4xx.c
src-$(CONFIG_MACH_STM32F4) += stm32/stm32f4.c generic/armcm_timer.c
src-$(CONFIG_HAVE_GPIO_ADC) += stm32/adc.c
src-$(CONFIG_MACH_STM32F4) += stm32/adc.c
src-$(CONFIG_HAVE_GPIO_I2C) += stm32/i2c.c
src-$(CONFIG_HAVE_GPIO_SPI) += stm32/spi.c
usb-src-$(CONFIG_HAVE_STM32_USBFS) := stm32/usbfs.c

View File

@ -156,6 +156,16 @@ hsi48_setup(void)
#endif
}
// Enable high speed internal 14Mhz clock for ADC
static void
hsi14_setup(void)
{
// Enable HSI14 for ADC
RCC->CR2 = RCC_CR2_HSI14ON;
while (!(RCC->CR2 & RCC_CR2_HSI14RDY))
;
}
// Main entry point - called from armcm_boot.c:ResetHandler()
void
armcm_main(void)
@ -179,6 +189,9 @@ armcm_main(void)
else
pll_setup();
// Turn on hsi14 oscillator for ADC
hsi14_setup();
// Support alternate USB pins on stm32f042
#ifdef SYSCFG_CFGR1_PA11_PA12_RMP
if (CONFIG_STM32F042_USB_PIN_SWAP) {

127
src/stm32/stm32f0_adc.c Normal file
View File

@ -0,0 +1,127 @@
// ADC functions on STM32
//
// Copyright (C) 2019 Kevin O'Connor <kevin@koconnor.net>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include "board/irq.h" // irq_save
#include "board/misc.h" // timer_from_us
#include "command.h" // shutdown
#include "compiler.h" // ARRAY_SIZE
#include "generic/armcm_timer.h" // udelay
#include "gpio.h" // gpio_adc_setup
#include "internal.h" // GPIO
#include "sched.h" // sched_shutdown
DECL_CONSTANT("ADC_MAX", 4095);
static const uint32_t adc_pins[][2] = {
{GPIO('A', 0), ADC_CHSELR_CHSEL0},
{GPIO('A', 1), ADC_CHSELR_CHSEL1},
{GPIO('A', 2), ADC_CHSELR_CHSEL2},
{GPIO('A', 3), ADC_CHSELR_CHSEL3},
{GPIO('A', 4), ADC_CHSELR_CHSEL4},
{GPIO('A', 5), ADC_CHSELR_CHSEL5},
{GPIO('A', 6), ADC_CHSELR_CHSEL6},
{GPIO('A', 7), ADC_CHSELR_CHSEL7},
{GPIO('B', 0), ADC_CHSELR_CHSEL8},
{GPIO('B', 1), ADC_CHSELR_CHSEL9},
{GPIO('C', 0), ADC_CHSELR_CHSEL10},
{GPIO('C', 1), ADC_CHSELR_CHSEL11},
{GPIO('C', 2), ADC_CHSELR_CHSEL12},
{GPIO('C', 3), ADC_CHSELR_CHSEL13},
{GPIO('C', 4), ADC_CHSELR_CHSEL14},
{GPIO('C', 5), ADC_CHSELR_CHSEL15}
};
struct gpio_adc
gpio_adc_setup(uint32_t pin)
{
// Find pin in adc_pins table
int chan;
for (chan=0; ; chan++) {
if (chan >= ARRAY_SIZE(adc_pins))
shutdown("Not a valid ADC pin");
if (adc_pins[chan][0] == pin)
break;
}
// Determine which ADC block to use
ADC_TypeDef *adc = ADC1;
uint32_t adc_base = ADC1_BASE;
// Enable the ADC
if (!is_enabled_pclock(adc_base)) {
enable_pclock(adc_base);
// 100: 41.5 ADC clock cycles
adc->SMPR |= (~ADC_SMPR_SMP_Msk | ADC_SMPR_SMP_2 );
adc->CFGR2 |= ADC_CFGR2_CKMODE;
adc->CFGR1 &= ~ADC_CFGR1_AUTOFF;
adc->CFGR1 |= ADC_CFGR1_EXTSEL;
// do not enable ADC before calibration
adc->CR &= ~ADC_CR_ADEN;
while (adc->CR & ADC_CR_ADEN)
;
while (adc->CFGR1 & ADC_CFGR1_DMAEN)
;
// start calibration and wait for completion
adc->CR |= ADC_CR_ADCAL;
while (adc->CR & ADC_CR_ADCAL)
;
// if not enabled
if (!(adc->CR & ADC_CR_ADEN)){
adc->ISR |= ADC_ISR_ADRDY;
adc->CR |= ADC_CR_ADEN;
while (!(ADC1->ISR & ADC_ISR_ADRDY))
;
}
}
gpio_peripheral(pin, GPIO_ANALOG, 0);
return (struct gpio_adc){ .adc = adc, .chan = adc_pins[chan][1] };
}
// Try to sample a value. Returns zero if sample ready, otherwise
// returns the number of clock ticks the caller should wait before
// retrying this function.
uint32_t
gpio_adc_sample(struct gpio_adc g)
{
ADC_TypeDef *adc = g.adc;
if ((adc->ISR & ADC_ISR_EOC) && (adc->CHSELR == g.chan)){
return 0;
}
if (adc->CR & ADC_CR_ADSTART){
goto need_delay;
}
adc->CHSELR = g.chan;
adc->CR |= ADC_CR_ADSTART;
need_delay:
return timer_from_us(10);
}
// Read a value; use only after gpio_adc_sample() returns zero
uint16_t
gpio_adc_read(struct gpio_adc g)
{
ADC_TypeDef *adc = g.adc;
adc->ISR &= ~ADC_ISR_EOSEQ;
return adc->DR;
}
// Cancel a sample that may have been started with gpio_adc_sample()
void
gpio_adc_cancel_sample(struct gpio_adc g)
{
ADC_TypeDef *adc = g.adc;
irqstatus_t flag = irq_save();
if (!(adc->ISR & ADC_ISR_EOC) && (adc->CHSELR == g.chan)){
adc->CR |= ADC_CR_ADSTP;
}
irq_restore(flag);
}