klipper-dgus/test/klippy
laurienzu 4c8d1b813c
config: Updated and created new TwoTrees configs to avoid confusion (#5365)
* Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg

I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed.

-Added detailed instructions for flashing in the header.
-Corrected rotation distances for axes, it was wrong.
-Added gear ratio for extruder that is useful for future changes.
-Added heater fan to HE1 pins for automatic shutdown with temp.
-Reduced speed and accel for Z since a 2mm screw is used.

* Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg

I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change.

The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option.

Signed-off-by:  Lorenzo Cascone <laurienzudesign@gmail.com>
2022-04-13 11:07:13 -04:00
..
sdcard_loop loop_sdcard: Add loopable SD card file sections 2021-05-26 11:57:57 -04:00
bed_screws.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
bed_screws.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
bltouch.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
bltouch.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
commands.test docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
delta.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
delta_calibrate.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
delta_calibrate.test test: Add new delta_calibrate test case 2019-12-05 14:48:52 -05:00
dual_carriage.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
dual_carriage.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
extruders.cfg extruder_stepper: Do not default to synching with "extruder" at startup 2022-03-04 13:38:59 -05:00
extruders.test extruder: Add new SYNC_EXTRUDER_MOTION command 2022-02-10 13:24:21 -05:00
gcode_arcs.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
gcode_arcs.test gcode_arcs: Add back in support for E moves in absolute extrude mode 2020-06-04 15:25:17 -04:00
input_shaper.cfg test: Add an input_shaper module test case 2021-10-26 20:01:33 -04:00
input_shaper.test test: Add an input_shaper module test case 2021-10-26 20:01:33 -04:00
led.cfg test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs 2022-03-31 13:08:12 -04:00
led.test test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs 2022-03-31 13:08:12 -04:00
macros.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
macros.test test: Add a macros.test test case for testing gcode_macro 2019-06-04 09:50:30 -04:00
manual_stepper.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
manual_stepper.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
move.gcode winch: Add experimental support for cable winch kinematics 2018-12-24 11:38:59 -05:00
multi_z.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
multi_z.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
out_of_bounds.test docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
polar.test polar: Add initial support for multiple bed rotations 2019-06-28 10:00:40 -04:00
printers.test config: Updated and created new TwoTrees configs to avoid confusion (#5365) 2022-04-13 11:07:13 -04:00
pwm.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
pwm.test test: Add pwm tests 2020-09-26 20:26:44 -04:00
quad_gantry_level.test test: Flush moves in quad_gantry_level and z_tilt_adjust tests 2019-06-12 15:36:32 -04:00
rotary_delta_calibrate.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
rotary_delta_calibrate.test rotary_delta: Initial support for rotary delta kinematics 2020-01-06 11:52:42 -05:00
screws_tilt_adjust.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
screws_tilt_adjust.test screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant. 2021-04-28 11:53:18 -04:00
sdcard_loop.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
sdcard_loop.test loop_sdcard: Add loopable SD card file sections 2021-05-26 11:57:57 -04:00
temperature.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
temperature.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
tmc.cfg test: Update test cases to use rotation_distance 2021-10-24 20:53:36 -04:00
tmc.test tmc: Configure "intpol" field from TMCMicrostepHelper 2019-06-28 16:59:26 -04:00
z_tilt.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
z_tilt.test test: Flush moves in quad_gantry_level and z_tilt_adjust tests 2019-06-12 15:36:32 -04:00
z_virtual_endstop.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
z_virtual_endstop.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00