Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/test/klippy
History
Manuel Fichtner 5d52a3b19f
config: Anycubic Vyper (#4740) 
This commit contains a configuration for the Anycubic Vyper printer from 2021.
It uses a clone of the STM32F103 chip named GD32F103.
There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has
been tested with the v0.0.6 only. It should probably work for v0.0.5 as well
since there are no different changes in the Anycubic Marlin firmware.
The LCD is not supported yet (might work, but didn't try yet).

Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw>
Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>
 		2021-10-11 16:26:14 -04:00
..
sdcard_loop loop_sdcard: Add loopable SD card file sections 2021-05-26 11:57:57 -04:00
bed_screws.cfg bed_screws: Add a helper tool for leveling bed screws 2019-02-24 00:49:47 -05:00
bed_screws.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
bltouch.cfg test: update sample configs and test configs with new bed_mesh options 2020-01-09 14:14:13 -05:00
bltouch.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
commands.test docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
delta.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
delta_calibrate.cfg test: Add new delta_calibrate test case 2019-12-05 14:48:52 -05:00
delta_calibrate.test test: Add new delta_calibrate test case 2019-12-05 14:48:52 -05:00
dual_carriage.cfg gcode: Remove builtin T0/T1/T2/... command support 2019-12-10 14:24:32 -05:00
dual_carriage.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
extruders.cfg extruder_stepper: Initial support for synchronized extruder steppers 2020-01-06 11:03:05 -05:00
extruders.test stepper: No need to pass stepper_kinematics to set_step_dist() 2020-03-28 10:06:02 -04:00
gcode_arcs.cfg test: Add initial test case for gcode_arcs support 2019-09-13 12:05:15 -04:00
gcode_arcs.test gcode_arcs: Add back in support for E moves in absolute extrude mode 2020-06-04 15:25:17 -04:00
macros.cfg test: Add a configfile test with unicode characters 2021-10-09 19:57:55 -04:00
macros.test test: Add a macros.test test case for testing gcode_macro 2019-06-04 09:50:30 -04:00
manual_stepper.cfg manual_stepper: Add support for moves with acceleration 2019-03-03 13:38:10 -05:00
manual_stepper.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
move.gcode winch: Add experimental support for cable winch kinematics 2018-12-24 11:38:59 -05:00
multi_z.cfg test: Add multi_z test case 2018-06-17 09:47:34 -04:00
multi_z.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
out_of_bounds.test docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
polar.test polar: Add initial support for multiple bed rotations 2019-06-28 10:00:40 -04:00
printers.test config: Anycubic Vyper (#4740) 2021-10-11 16:26:14 -04:00
pwm.cfg test: Add pwm tests 2020-09-26 20:26:44 -04:00
pwm.test test: Add pwm tests 2020-09-26 20:26:44 -04:00
quad_gantry_level.test test: Flush moves in quad_gantry_level and z_tilt_adjust tests 2019-06-12 15:36:32 -04:00
rotary_delta_calibrate.cfg stepper: Calculate step_distance from rotation_distance 2020-12-18 10:30:32 -05:00
rotary_delta_calibrate.test rotary_delta: Initial support for rotary delta kinematics 2020-01-06 11:52:42 -05:00
screws_tilt_adjust.cfg test: update sample configs and test configs with new bed_mesh options 2020-01-09 14:14:13 -05:00
screws_tilt_adjust.test screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant. 2021-04-28 11:53:18 -04:00
sdcard_loop.cfg loop_sdcard: Add loopable SD card file sections 2021-05-26 11:57:57 -04:00
sdcard_loop.test loop_sdcard: Add loopable SD card file sections 2021-05-26 11:57:57 -04:00
temperature.cfg adc_temperature: Add builtin definition for PT1000 sensors 2020-03-05 11:46:01 -05:00
temperature.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00
tmc.cfg tmc2209: Add support for sensorless homing 2019-08-19 12:05:09 -04:00
tmc.test tmc: Configure "intpol" field from TMCMicrostepHelper 2019-06-28 16:59:26 -04:00
z_tilt.cfg test: Add quad_gantry_level and z_tilt_adjust test cases 2019-06-12 13:49:27 -04:00
z_tilt.test test: Flush moves in quad_gantry_level and z_tilt_adjust tests 2019-06-12 15:36:32 -04:00
z_virtual_endstop.cfg test: update sample configs and test configs with new bed_mesh options 2020-01-09 14:14:13 -05:00
z_virtual_endstop.test test: Rename atmega2560-16mhz.config to atmega2560.config 2019-03-22 12:36:18 -04:00