f035de264f
tmc: Add support for periodic checking of driver status
...
Check the status of all Trinamic stepper motor drivers once a second.
If the driver reports an error then invoke a shutdown. Also log any
serious warnings.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-27 10:39:47 -05:00
c7688c6bca
tmc2130: Add spi daisy chain support
...
This patch adds the ability to daisy-chain multiple tmc2130 and
tmc5160 drivers.
Signed-off-by: Marco D'Alessio <marco@wrecklab.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-26 10:54:47 -05:00
6b6ab45bac
docs: Use BME280 (uppercase) in Config_Reference.md ( #3896 )
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2021-02-22 15:42:14 -05:00
2aa2e91f2c
Revert "bme280: Rename sensor_type from BME280 to bme280"
...
This reverts commit ac61f8b726
2021-02-20 15:39:03 -05:00
ac61f8b726
bme280: Rename sensor_type from BME280 to bme280
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 09:23:39 -05:00
c29585f7f3
temperature_host: Rename "path" config to "sensor_path"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-20 09:23:13 -05:00
3d35c003db
temperature_host: Rename rpi_temperature and add support for custom paths
...
Signed-off-by: Evgenii Shavrin <shavrin0591@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-19 18:44:28 -05:00
bc2f6faa17
probe: Add last_z_result to get the latest z result in an Macro ( #3835 )
...
Signed-off-by: Christian Schnellrieder <schnello.android@gmail.com>
2021-02-18 22:03:32 -05:00
83cc6039c5
docs: Fix typo in Sensorless_Homing.md
...
Reported by @stefanfoulis.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-18 20:14:18 -05:00
5db0b3d474
docs: Update PRU command dispatch benchmark
...
The PRU command dispatch benchmark was primarily limited by the speed
of the console.py tool on the slow beaglebone processor. Add a note
on how to account for that and restate the PRU benchmark.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-12 14:08:33 -05:00
4b32067565
docs: Fix typo in Sensorless_Homing.md ( #3916 )
...
Signed-off-by: Jordan Woyak <jordan.woyak@gmail.com>
2021-02-11 14:52:46 -05:00
03b62ca04f
docs: Add SDCard_Updates.md to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-10 13:00:57 -05:00
5769a9072b
docs: Minor wording change to Pressure_Advance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-08 11:46:40 -05:00
ff264bf241
docs: Reformat Pressure_Advance.md to improve Jekyll rendering
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-08 11:41:15 -05:00
bb564ff58d
docs: Minor update to Pressure_Advance.md
...
Update e-steps link to new Rotation_Distance.md
Make it clear how to update the pressure_advance setting in the config
file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-08 11:37:43 -05:00
a7b50b6002
docs: add documentation for SD Card firmware updates
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-02-05 19:37:56 -05:00
6bd78ecee4
docs: Update Contact.md to clarify use of mailing list
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-05 19:01:17 -05:00
7d4df65920
ds18b20: new module for 1-wire temperature sensor ( #3462 )
...
Initial commit of code to support 1-wire (Dallas) sensors such
as the DS18B20. Requires Linux kernel drivers to create a file
in /sysfs which is read by this module, and temperature
typically returned to a temperature_fan.
Signed-off-by: Alan Lord <alanslists@gmail.com>
Signed-off-by: Josh Headapohl <joshhead@gmail.com>
2021-02-02 14:34:56 -05:00
19397a0a2b
temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command ( #3873 )
...
Allows setting min_speed and max_speed at runtime, rather than updating the config and restarting.
Signed-off-by Lane Roberts <nolatari@vandarin.net>
2021-02-02 14:30:04 -05:00
b45b0162bf
docs: Some clarifications for resonances measurements and tuning
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-02-02 14:13:24 -05:00
d136b1e41a
resonance_tester: Increase test max_accel to 10K and max_freq to 133 Hz
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-02-02 14:13:24 -05:00
a8b282d67a
resonance_tester: Disable input shaping for resonance testing
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-02-02 14:13:24 -05:00
0fb2449be0
adxl345: Add accelerometer chip name to the raw data file name
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-02-02 14:13:24 -05:00
60e4cddf36
hd44780: Add hd44780 protocol init config
...
LDO OLED needs a different init string.
Fixes : #3722
Signed-off-by: Thomas Kroll <t.kroll@outlook.com>
2021-01-31 19:35:40 -05:00
58cd8da5d1
docs: Updates to Contact.md and use of github issues
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-31 19:13:47 -05:00
c9420ee3c0
docs: Add a link in Overview.md to Bed_Mesh.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 10:47:15 -05:00
b32166c8a0
Docs: resonance testing fixup ( #3804 )
...
Chip names are now correct for bed slingers.
Added some notes about testing with >1 chip
Signed-off-by: Jarad Olson <brotherdust@gmail.com>
2021-01-24 10:22:18 -05:00
8cc1d84180
configfile: Add printer.configfile.settings command template parameter
...
Make available the parsed value (or default value) for config options
to command templates and to the api server.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-20 16:25:25 -05:00
8a6619d18e
mcu: Add a get_status() callback with micro-controller info and stats
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-19 23:12:41 -05:00
ef40e71fe1
docs: Minor reword to Rotation_Distance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 11:09:45 -05:00
2ae732a13a
docs: Note the BMG extruder is actually 50:17 and not 3:1
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-10 10:59:43 -05:00
e68cf08d15
kinematics: report all axis limits (min/max)
...
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-12-28 10:19:57 -05:00
a5ebe5825a
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command ( #3674 )
...
Signed-off-by: Justin Schuh <code@justinschuh.com>
2020-12-24 11:34:26 -05:00
1a9218532b
heaters: Add MAXIMUM option to TEMPERATURE_WAIT command
...
Signed-off-by: Justin Schuh <code@justinschuh.com>
2020-12-23 18:16:46 -05:00
ac98d0ea7e
docs: Note step_distance deprecated in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-22 19:56:36 -05:00
ab93ee9293
docs: Limiting max_smoothing for input shaper autocalibration
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-12-22 18:37:41 -05:00
a59461e20e
docs: Minor formatting change to Rotation_Distance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-21 18:37:04 -05:00
ec1bd77cc2
docs: Fix klipper3d.org rendering of Rotation_Distance.md
...
The Jeykll rendering doesn't like block quoted text that wraps lines.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-21 18:04:47 -05:00
5b31080e77
docs: Add a Rotation_Distance.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:30:32 -05:00
96eba9f2df
endstop_phase: Obtain phases directly from stepper microsteps config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:30:32 -05:00
7dcc778b6c
stepper: Calculate step_distance from rotation_distance
...
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:30:32 -05:00
4a41d228eb
docs: Input Shaper and Resonances docs improvements ( #3627 )
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-12-17 17:44:46 -05:00
77add95675
heaters: add last pwm value to heater.get_status ( #3621 )
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2020-12-13 20:08:16 -05:00
43a6d18f13
docs: Fix board_pins link in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 12:36:14 -05:00
89183edbda
manual_probe: Use configfile note_valid=False when inspecting Z position_endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:41:40 -05:00
2d6b44152a
bltouch: Recommend using a pullup on the sensor_pin
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-11 11:01:44 -05:00
f3c5be0f00
gpiocmds: Merge digital output and soft pwm code
...
The digital output commands implement a subset of the software pwm
commands. Change the host code to just use the software pwm commands
and simplify the micro-controller code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 12:06:26 -05:00
a1baefc2c2
temperature_mcu: Add enhanced support for monitoring mcu temperature
...
Add a "temperature_mcu" tool that can monitor builtin micro-controller
temperature sensors.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 02:39:06 -05:00
6bbfc869a1
docs: Improve spi and i2c description in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-08 08:53:18 -05:00
6fe2ee0380
docs: Minor wording change to thermistors in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 12:12:21 -05:00
e83801daab
heaters: Add a TEMPERATURE_WAIT command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 09:57:13 -05:00
654cbeb286
docs: Group temperature sensors together in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-05 18:16:20 -05:00
fc8ac8fe25
docs: Move micro-controller information together in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-05 14:39:37 -05:00
19a96346a8
gpiocmds: Use move queue for software pwm
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
9cdf9bb6ec
gpiocmds: Use move queue for digital output pins
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
e8ec1801ff
pwmcmds: Use move queue for hard PWM
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
086f0fafde
gpiocmds: Send soft pwm cycle_time separately from schedule_soft_pwm_out
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
21a3a8559d
docs: Add indentation to generated table-of-contents on klipper3d.org site
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 19:24:40 -05:00
1f9516ad7f
docs: Simplify javascript link modification for external references
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 18:44:31 -05:00
14952ccef5
docs: Add links to default display.cfg and menu.cfg in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 18:11:29 -05:00
6e48ee537f
docs: Fix "github pages" rendering of pictures in Resonance_Compensation.md
...
The "github pages" service wont properly render a table with
"|:--:|:--:|" and no table contents. In contrast, normal github
markdown contents wont show the table without it. For now, remove the
line as the normal github markdown contens look okay even if the
content isn't rendered as a table.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 15:27:38 -05:00
1f2d9c051c
docs: Use relative links for files outside the docs/ directory
...
Use javascript to fixup the "github pages" rendering of links to files
outside the docs/ directory. Then use normal relative links in the
documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 15:06:58 -05:00
a2d1e03b91
docs: Yet again try to fix github-pages rendering of Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:41:47 -05:00
23f547169c
rpi_temperature: Don't read min_temp/max_temp directly from config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:37:56 -05:00
b911db4c0d
rpi_temperature: New module to monitor RPi temperature ( #3587 )
...
Module to monitor RPi cpu temperature
Signed-off-by: Al Crate <aleph@al3ph.org>
2020-12-03 12:35:37 -05:00
a1ae548766
docs: Fix github-pages rendering of Command_Templates.md (again)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:28:35 -05:00
5ddb093421
docs: Fix github-pages error in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:27:02 -05:00
d7053f6e71
save_variables: Support saving variables to a disk file
...
Signed-off-by: Dushyant Ahuja dusht.ahuja@gmail.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:19:47 -05:00
91de1560a7
menu: modifications ( #3262 )
...
- remove lot of helper methods
- differentiate class instantiate from config or directly
- don't use 'enable' template rendering when static value is used.
- new element 'disabled'
- other internal adjustments
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-12-03 10:46:55 -05:00
422386e94c
docs: Clean up example values in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-02 08:44:37 -05:00
d42930e232
docs: Update Command_Templates.md to note printer.controller_fan.speed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 12:51:49 -05:00
88c7bf830f
G-Codes: Minor formatting fix
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-23 11:52:46 -05:00
111f084c6a
docs: Add additional command reference links to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-23 11:27:01 -05:00
d1173d59c9
docs: Add more links to G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-23 11:25:19 -05:00
c6f870a655
docs: Update RPi_microcontroller.md links to render correctly on klipper3d.org
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-22 20:33:49 -05:00
fcb78e50e5
hd44780: allow to configure line length ( #3543 )
...
This allows to use 16x4 displays rather than only 20x4.
Signed-off-by: Martin Hierholzer <hier@beta-centauri.de>
2020-11-20 14:49:38 -05:00
c6f0884140
docs: Add some additional links to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 14:22:13 -05:00
6c0c05774b
docs: Fix quad_gantry_level header in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 14:02:59 -05:00
e2528c13fa
docs: Add more links to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 13:34:50 -05:00
bdd938b578
board_pins: Use an explicit parameter to specify mcu name(s)
...
Add an 'mcu' option to the board_pins config and use that to specify
the name of the mcu to apply the aliases to. Support applying the
aliases to multiple mcus.
Add support for any number of options starting with an "aliases_"
prefix.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 12:00:36 -05:00
37b475815e
docs: Move replicape reference from generic-replicate.cfg to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 11:57:18 -05:00
15b5dbaf8f
docs: Move config reference information to new Config_Reference.md
...
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-18 20:10:21 -05:00
bdaca32707
docs: Note the change in "print_stats.duration"
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-11-13 20:48:15 -05:00
fc0a18f891
docs: Document "register_remote_method" endpoint
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-11-04 18:32:30 -05:00
7ad36a2164
github: Run continuous integration tests using "github actions"
...
Use "github actions" instead of "travis ci" for the automatic build
regression tests.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-30 15:23:42 -04:00
7263077db5
neopixel: Add support for RGBW LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-29 12:00:25 -04:00
56004c0228
mcu: Don't default serial config option to /dev/ttyS0
...
If the mcu config section is omitted, it leads to confusing error
messages. Don't default the serial config option to /dev/ttyS0 to
improve the error reporting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-28 15:35:08 -04:00
106d1d2a2a
docs: Note the release of v0.9.1
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-28 10:55:21 -04:00
2bcf06a295
docs: Update release notes for v0.9.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-20 19:40:32 -04:00
1b471b482d
docs: Note PROBE_CALIBRATE results invalidated on motion system update
...
Any hardware change to the hotend or probe, change to the kinematics,
or change to the bed tilt is likely to invalidate the results of
PROBE_CALIBRATE. Try to warn the user of that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-20 19:26:24 -04:00
abb0d8801c
docs: Note screws_tilt_adjust nozzle/probe coordinates in Manual_Level.md
...
The screws_tilt_adjust takes nozzle coordinates, but the goal is for
the Z probe to be above the screws.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 19:24:54 -04:00
ac57b6522e
docs: Minor formatting change to Probe_Calibrate.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 18:48:43 -04:00
6b23dd9ff1
docs: Provide response_template in subscription examples in API_Server.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 10:59:21 -04:00
bfcd5536fc
docs: Add initial API_Server.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 10:41:14 -04:00
a87e5616a0
docs: Add Measuring_Resonances.md to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-16 21:32:33 -04:00
cf6d302ac3
docs: Update Command_Templates.md with available get_status() fields
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-15 13:29:50 -04:00
c0eefc0076
docs: Recommend disable "dynamic acceleration control" during tuning
...
Note that "dynamic acceleration control" should be disabled in the
pressure advance and input shaper tests.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-15 12:07:10 -04:00
f8c4f90c04
resonance_tester: Resonance testing and input shaper auto-calibration ( #3381 )
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-10-14 20:08:10 -04:00
d53365f996
docs: Updates to Features.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-13 16:38:32 -04:00
55e20f2c19
mcu: Add support for changing cycle_time in set_pwm()
...
Signed-off-by: Guy Shapira <gayuha@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-26 20:55:56 -04:00
27cefb2b38
gpiocmds: Add soft-pwm frequency modulation support
...
Signed-off-by: Guy Shapira <gayuha@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-26 20:51:38 -04:00
3ac636b33e
docs: document additions to BED_MESH_CALIBRATE
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-09-15 20:36:55 -04:00
063f9a2c02
docs: Fix "QUERY_STATUS" typo in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 23:11:24 -04:00
5a2f406fd1
probe: add get_status wrapper to probe for last_query from query_probe command ( #3296 )
...
Add get_status wrapper with last_query status for macros It is sometimes useful to determine the state of the probe from a macro. If the probe is connected to an endstop pin, the results can be obtained via QUERY_ENDSTOPS but if a physical endstop is in use in addition to the probe the probe state cannot be obtained. This change allows one to use QUERY_PROBE and then access the printer.probe.last_query object to obtain the state.
Signed-off-by: Paul McGowan <mental405@gmail.com>
2020-09-09 23:10:35 -04:00
9197975625
docs: Note that FORCE_MOVE can lead to "No next step" errors in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-08 10:18:28 -04:00
3405095f0a
adxl345: Add support for adxl345 accelerometer
...
Add support for taking measurements from an adxl345 accelerometer via
SPI interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-05 09:11:04 -04:00
c3e9999e0c
docs: Update OctoPrint and OctoPi versions in Installation.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 21:24:26 -04:00
37d7742468
spi_temperature: fix MAX31865 temperature conversion ( #3274 )
...
Signed-off-by: Adrian Keet <arkeet@gmail.com>
2020-09-02 09:32:30 -04:00
2bb6b0f58f
docs: Expand on host computer restrictions in the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-26 10:11:21 -04:00
1286d3006c
gcode_move: Move GCodeMove class from gcode.py to new extras module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
b691e013f0
docs: Document printer.gcode_move variables in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
4c5e93d51d
gcode: Split G0/G1 command handling to new gcode_move class
...
Split up the main GCodeParser class into GCodeDispatch and GCodeMove
classes. The GCodeMove class is now available using the "gcode_move"
printer object name. This split simplifies the gcode.py code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
5f47a91464
docs: Add idle_timeout get_status() info to Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
b2c78d71b0
gcode: Remove "action_" commands from get_status() calls
...
Rename printer.gcode.action_emergency_stop() to
action_emergency_stop(), printer.gcode.action_respond_info() to
action_respond_info(), and printer.gcode.action_respond_error() to
action_raise_error() in command templates.
This simplifies the get_status() interface, as returning callable
functions from that interface was confusing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
1bdf705524
hall_filament_width_sensor: Fix Flow update before next pending_position #3184 ( #3198 )
...
After reading the first item of self.filament_array, filament_width is updated back to self.nominal_filament_dia or self.diameter instead of retaining the value until next pending_position.
Updated Filament Menu Template.
Signed-off-by: Nicola Falciani <nicola.fal@gmail.com>
2020-08-19 18:58:49 -04:00
04bd48ca9d
adc_temperature: add support for AD597 ( #3164 )
...
The AD597 thermocouple amplifier is used in the Raise3D N2+ (and
possibly others).
Signed-off-by: Bryan Boettcher <bryan.boettcher@gmail.com>
2020-08-09 21:06:43 -04:00
864d172b68
docs: Note menu change in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-09 09:37:54 -04:00
efebbb9a2f
tmc5160: diag0 support ( #3159 )
...
Allow for diag0 only hardware to use sensorless homing.
Signed-off-by: Trevor Jones <trevorjones141@gmail.com>
2020-08-09 08:17:51 -04:00
c9e7119a93
fan_generic: Add support for named fans and gcode to control them ( #3054 )
...
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
2020-08-07 11:39:44 -04:00
605c32fc98
docs: Move and reword the Resonance_Compensation.md link in Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-05 23:28:54 -04:00
74c0e3a484
docs: document changes to the virtual_sdcard module
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-08-05 13:46:24 -04:00
fe84968bdc
docs: Add uninstall notes to faq
...
From comments in https://github.com/KevinOConnor/klipper/issues/1084
This documents the script added in 0ba1f5109d
2020-08-03 14:16:34 -04:00
d33a34614f
docs: Add RPi_microcontroller.md link in Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-01 13:09:09 -04:00
f3b980c1b2
docs: Suggested improvements to Input Shaper tuning guide
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-29 21:28:18 -04:00
b944666bb1
docs: ringing_tower model for input shapers tuning
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-29 21:28:18 -04:00
b62a0d5db5
docs: First version of documentation for Input Shaper tuning
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-29 21:28:18 -04:00
25a9a32ecb
docs: Move SET_TEMPERATURE_FAN_TARGET to its own section in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-26 10:41:43 -04:00
ab923883f7
docs: Update G-Codes.md for SET_TEMPERATURE_FAN_TARGET ( #3122 )
...
Added extended G-Code documentation for SET_TEMPERATURE_FAN_TARGET
Signed-off-by: Martin Nowroth <madnoth@gmail.com>
2020-07-26 10:39:53 -04:00
428a8d4881
servo: Remove servo ENABLE parameter
...
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-25 11:39:39 -04:00
53092a6474
docs: Add link to config/sample-macros.cfg in Slicers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-16 13:04:00 -04:00
e4d0044be8
docs: Add a "hardware pin type" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-16 13:04:00 -04:00
4bdc11a8b3
input_shaper: Initial support of input shaping ( #3032 )
...
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-05 20:54:38 -04:00
09a3d018a8
docs: Fix broken links in RPi_microcontroller.md
...
Also add a note regarding "Permission denied" errors.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-07-05 20:48:12 -04:00
b3298d8992
hall_filament_width_sensor: Added width logging ( #2981 )
...
Signed-off-by: Denis Ignatenko deniss979@gmail.com
2020-06-16 13:36:49 -04:00
35bbd989e4
docs: LinuxMCU doc & script ( #2956 )
...
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
2020-06-12 20:32:12 -04:00
467e8e6f40
display: Default DISPLAY=display in SET_DISPLAY_GROUP command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-09 12:19:53 -04:00
68fcbe2a62
display: add SET_DISPLAY_GROUP command ( #2969 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2020-06-09 12:07:25 -04:00
d94dd8e9fd
docs: Note changes to glyph names
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-08 16:55:09 -04:00
b0e8e84d6e
docs: Add linux mcu test results to Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-07 09:27:55 -04:00
518fe023b4
extruder_stepper: Support changing synced extruder on the fly ( #2824 )
...
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
2020-06-06 14:30:58 -04:00
967fe1c01c
HallFilamentWidthSensor: Use current width instead of nomal width while delay is not over ( #2907 )
...
Option for using the current diameter instead of nominal while the first measurement isn't in place
Signed-off-by: Matthias Pabel <matthias.pabel@hs-augsburg.de>
2020-06-06 14:19:00 -04:00
a6f2fc7179
docs: Minor reword to latest Config_Changes.md update
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-06 12:51:36 -04:00
b7699d374a
linux: Ability to use multiple GPIO chips ( #2935 )
...
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
2020-06-06 12:47:11 -04:00
7912c39f9e
docs: Add a "why does klipper report errors" section to FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-05 17:04:02 -04:00
2a66286d1c
display: Do not show time remaining in default 16x4 display
...
The time remaining estimation is wildy inaccurate. Only show the time
elapsed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-04 15:02:18 -04:00
ea9eac6c38
Kconfig: Change the default usb vendor/product id
...
Change the product/vendor id to 0x1d50/0x614e, which has been reserved
for Klipper (thanks to the openmoko project).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-31 21:05:04 -04:00
a9426d045b
docs: Update bootloaders.md with HID bootloader documentation
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-05-28 14:44:51 -04:00
686d557863
tmc5160: Change the default for the pwm_freq field to zero
...
The tmc5160 spec shows a default of zero, so use that same default for
Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-24 23:58:48 -04:00
5afa5d3fbb
docs: Fix typo in Contact.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-24 15:26:00 -04:00
f0c394de81
docs: Add stow_on_each_sample description to BL-Touch.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-11 12:46:25 -04:00
eebd7e6579
docs: Update bltouch probe_with_touch_mode documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-11 12:46:25 -04:00
f88117c7e4
docs: Update HallFilamentWidthSensor.md ( #2827 )
...
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
2020-05-05 17:45:26 -04:00
1eb2d4da90
docs: Clarify that Probe_Calibrate uses the speed variable for XY as well ( #2735 )
...
Signed-off-by: Dushyant Ahuja <dusht.ahuja@gmail.com>
2020-05-05 09:03:39 -04:00
bf6f84b82d
docs: Note that printer.heater got changed to printer.heaters
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-26 17:30:57 -04:00
ee9657bbf6
docs: Note __test menu removed in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-18 12:08:57 -04:00
b2a29c6349
docs: Update BLTouch.md initial tests for users with a regular z endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-02 17:34:15 -04:00
5d0658b91b
docs: Add BLTouch.md section describing clone config options
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-02 17:34:15 -04:00
291fbe0801
docs: Add touch_mode sensor test to BLTouch.md
...
Describe how to test the sensor pin using the BLTouch touch_mode.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-02 17:34:15 -04:00
3c01b60a88
docs: Update FAQ with TMC2208 "standalone" mode workaround
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-29 11:08:49 -04:00
d4bf61262e
Extruder: Add g-code to set extruder step_distance ( #2598 )
...
Signed off by: David Smith <davidosmith@gmail.com>
2020-03-28 09:52:46 -04:00
849cc075dc
docs: Fix typo in MANUAL_STEPPER command line
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-23 15:06:32 -04:00
6be552f6e6
Allow manual_stepper to run in parallel than an other stepper
...
Signed-off-by: Jeremy Briffaut <kakou@kakou.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-23 14:43:34 -04:00
0c9eb519ff
docs: Update Manual_Level.md Z_ENDSTOP_CALIBRATE instructions
...
The endstop must not be triggered at the start of Z_ENDSTOP_CALIBRATE.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-22 11:18:31 -04:00
7543876487
docs: Add info on S3D "extra retract distance" to Slicers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-22 11:00:02 -04:00
5e39d346ed
display: Use the active extruder in the default 16x4 screen layout
...
Change the default layout to show the active extruder (not always the
first extruder).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-13 21:50:38 -04:00
0ba83c5b04
docs: clarify behavior of M204 with only one of P or T ( #2564 )
...
Signed-off-by: Garth Snyder <garth@garthsnyder.com>
2020-03-11 13:03:48 -04:00
3850b3d27a
docs: Fix date of menu change in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-08 17:42:22 -04:00
d39c4fe628
menu: Disable support for "deck" and "card" menu items
...
Disable support for customizing the main lcd display content via the
menu system. Advise users to use the new display_data config sections
as a replacement.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-08 17:38:24 -04:00
63ba7d231e
docs: Minor updates to Code_Overview.md
...
Minor indentation change. Update for change to stepcompress_append().
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-02 21:54:22 -05:00
f84542cd20
hall_filament_width_sensor: Added virtual runout sensor ( #2535 )
...
Signed-off-by: Denis Ignatenko deniss979@gmail.com
2020-03-01 22:05:12 -05:00
26523d77ba
docs: Minor wording change to Endstop_Phase.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-03-01 11:40:13 -05:00
16ecf15a91
bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands ( #2540 )
...
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
2020-02-23 22:32:07 -05:00
15f21be5ec
manual_stepper: Support ignoring errors on STOP_ON_ENDSTOP
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-19 13:38:22 -05:00
01d985a739
docs: Recommend RPi 2 or later in Installation.md
...
Reported by @patrickkettner.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-17 20:49:32 -05:00
9a65a4569b
hall_filament_width_sensor: Add new filament sensor
...
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
2020-02-14 13:14:34 -05:00
c3899cefa8
configfile: Add get_status() to export raw config file information
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-13 22:04:40 -05:00
512ad4b3a4
query_endstops: Add get_status() method that reports the last query state
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-02-12 19:32:48 -05:00
596f5e3e3a
stepper_enable: Add SET_STEPPER_ENABLE gcode command ( #2463 )
...
Signed-off-by: David Smith <davidosmith@gmail.com>
2020-02-10 22:34:11 -05:00
c36fe76d69
probe: Add support for configuring lift_speed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-31 15:47:06 -05:00
2f8ad5e6ac
docs: Update Config_Changes.md with actual bed_mesh merge date
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-09 14:17:51 -05:00
46d0c6bdfc
docs: Update Config_Changes.md to reflect bed_mesh changes
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-01-09 14:14:13 -05:00
edae40c36f
docs: Update documentation to reflect bed_mesh changes
...
Also add new bed_mesh.md documentation.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-01-09 14:14:13 -05:00
3fb0b7e4bc
docs: Update Command_templates.md - numbers in gcode_macro name must be at end
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-07 20:58:39 -05:00
005cfea5c3
gcode: Fix detection of some "extended" g-code commands
...
Fix typo that resulted in _get_extended_params() being called for all
commands. Allow "extended" g-code commands to contain numbers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-07 19:17:20 -05:00
6972b6303d
docs: Updates for gcode_macro naming ( #2317 )
...
Add note about numbers in macro names. Add note about variable name case restriction. Add set variable example.
Signed-off-by: David O Smith <davidosmith@gmail.com>
2020-01-06 10:59:40 -05:00
baa0d2ff8c
docs: Minor formatting change to Config_checks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-06 10:45:53 -05:00
5ff45636d9
docs: Minor FAQ updates
...
Fix rendering of Patreon URL in FAQ. Use same "ls" command to find
the serial port that Installation.md uses. Note Raspberry Pi 4 is
supported. Note problems with ModemManager. Point to Bed_Level.md in
Z position_endstop question. Link to Config_checks.md in "Z
screaching" FAQ.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-01-06 10:45:48 -05:00
dabffcc22c
kin_extruder: Convert pressure advance to use "weighted average"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-20 12:21:58 -05:00
b921b8a1c1
docs: Document support for M204 P and T parameters
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-18 16:34:45 -05:00
0a86190bae
display: Revert "display: Add ST7567 display support ( #1540 )"
...
This reverts commit 1b92af6078
2019-12-18 12:30:20 -05:00
7532e4ccea
scripts: Replicape pru update start scripts ( #2277 )
...
Signed-off-by: Trevor Wilson <altocoey@hotmail.com>
2019-12-18 12:11:40 -05:00
254789f4c5
neopixel: Add support for delaying updates in SET_LED command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-15 23:24:17 -05:00
1d05a34cd7
docs: Update Kinematics.md document with "smooth pressure advance"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-13 17:52:51 -05:00
91bade5824
docs: Update Config_Changes.md with pointer to sample multi extruder configs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-13 12:33:13 -05:00
2721211456
heater: Add PrinterHeater get_status() function
...
Provide a list of available heater and sensor names to
gcode macro templates through the printer.heater.available_heaters
and printer.heater.available_sensors variables
Signed-off-by: Simon Kühling <mail@simonkuehling.de>
2019-12-13 10:45:04 -05:00
fcee27fc19
gcode: Remove builtin T0/T1/T2/... command support
...
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers. Remove the command and encourage users to
define individual gcode_macros for each Tn instance.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:24:32 -05:00
c06618193d
extruder: Add an ACTIVATE_EXTRUDER command
...
Add support for an extended g-code command to change the currently
active extruder.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:23:13 -05:00
ab2d302b7e
gcode: Remove support for the M206 command
...
The M206 command isn't particularly standardized and isn't issued by
default from 3rd party software in their standard configurations.
Encourage users to use the more powerful SET_GCODE_OFFSET command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 14:23:10 -05:00
8663bc8192
docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 13:51:47 -05:00
205da598fd
docs: Move upgrade instructions to the last item in the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-10 13:39:49 -05:00
10270dc7ef
docs: Fix another typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 12:26:45 -05:00
f82a85aad0
docs: Fix typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 12:17:13 -05:00
e17f2bac96
docs: Minor "coordinate system" wording change to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 12:05:31 -05:00
e557f2d0c0
docs: Add information on coordinate systems to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-04 11:09:22 -05:00
8e87ab0939
gcode: Remove support for "G4 S1" style commands
...
The S parameter is not a standard and was not commonly used. The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-02 19:31:20 -05:00
43bb45a1d3
docs: Minor update to Config_Changes.md
...
Use same "ls /dev/serial/by-id/*" command used in Installation.md.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 14:25:40 -05:00
935088ddff
docs: Clarify recent usb device name change in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 10:29:15 -05:00
e80ced5568
usb_cdc: Report MCU type on all boards
...
Always report the "product id" as the MCU type (instead of as "Klipper
firmware").
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-26 08:45:20 -05:00
401f7a879c
atsam: Enable chipid as usb serial number
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-26 08:42:14 -05:00
d7ec5505a6
atsamd: Enable chipid as usb serial number
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-25 19:30:31 -05:00
8f6efe5a7b
stm32: Enable chipid as usb serial number
...
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-25 19:30:31 -05:00
0b0e5a911e
docs: Minor wording change in Pressure_Advance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-25 11:48:41 -05:00
3aad25eab9
docs: Recommend normal slicer settings in Pressure_Advance.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-25 11:35:39 -05:00
3683273936
toolhead: Report which axes are homed via get_status()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-24 20:21:13 -05:00
282af0220e
toolhead: Report the current extruder from the get_status() method
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-24 20:21:13 -05:00
982567a69a
config: Rename avrsim.cfg to generic-simulavr.cfg
...
Rename the file to be more similar to the naming of other files.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-24 20:21:13 -05:00
c188aa982f
docs: Kinematics.md updates for extruder instantaneous corner velocity
...
As of commit 5f5896ad
2019-11-22 17:04:14 -05:00
6d0c55b6c1
extruder: Initial support for "smoothed pressure advance"
...
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-21 13:18:19 -05:00
430b8d0e52
usb_cdc: Report the MCU name instead of "Klipper firmware"
...
Change the "product id" from the redundant "Klipper firmware" to the
CONFIG_MCU value. For now, only make this change on boards that have
CONFIG_HAVE_CHIPID set.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-21 11:56:31 -05:00
9055e9f9b5
docs: Update SAMD51 benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-18 12:49:05 -05:00
224574da4a
stepper: Add get/set_tag_position() and convert calc_position()
...
Rename calc_position() to calc_tag_position() and have it calculate
the value of the position from the last stepper set_tag_position()
call. This enables the calc_tag_position() code to be more flexible
as it can be run with arbitrary positions.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-13 19:00:17 -05:00
0bf4ab66da
docs: Add get_status() to list of kinematics methods in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-12 22:47:10 -05:00
6116a5d48f
stepper_enable: Remove ability to use a list of pins in enable_pin
...
Now that the tmc drivers perform automatic soft stepper enabling,
there is no need to be able to list multiple pins in the enable_pin
config setting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-12 18:45:31 -05:00
77dff35fae
tmc: Remove virtual_enable support and replace with automatic support
...
Automatically detect if the stepper has a dedicated enable line. If
it does not, then automatically enable virtual enable support.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-12 18:45:31 -05:00
bfb34e0701
stepper_enable: Move motor_off() logic to stepper_enable.py
...
Directly disable all the stepper motors on a global motor_off() from
the StepperEnable() class in stepper_enable.py. This simplifies the
toolhead and kinematic classes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-12 17:32:18 -05:00
0bfb655f66
query_adc: Add a new module to help query and debug analog pins
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 19:28:27 -05:00
3665e9fc53
docs: Recommend safe_z_home over homing_override
...
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 16:50:52 -05:00
ed610a6600
extruder: Consistently use "extruder" for the primary extruder
...
No longer allow the primary extruder to be named "extruder0". This
avoids internal and external confusion between the printer objects and
config section names.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 16:28:47 -05:00
29b5961d9f
docs: Note gcode_arcs and firmware_retraction commands in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 15:44:25 -05:00
72735b4552
docs: Update Code_Overview.md with new trapq system
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 10:42:12 -05:00
3f338c08c1
docs: Minor micro-controller updates to Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 10:08:21 -05:00
e2f5e2871c
docs: Recommend OctoPrint v1.3.12 in Installation.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-30 11:02:03 -04:00
d65f2e2861
docs: Minor cleanup to square_tower.scad
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-27 12:16:17 -04:00
632ff9e55a
docs: Update benchmarks for stm32f0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 21:45:07 -04:00
f160a3a824
docs: Reword Pressure_Advance.md paragraph on kinematic impact
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 19:50:51 -04:00
ccbdb6c531
docs: Pressure_Advance.md should recommend setting ADVANCE_LOOKAHEAD_TIME
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 19:34:59 -04:00
c794e11c67
docs: Update Pressure_Advance.md to use tuning tower
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 19:28:03 -04:00
b8a6160646
docs: Update example openocd config in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 19:05:04 -04:00
f07292084b
docs: Remove outdated stm32f1.md document
...
The stm32f103 has become popular in the "skr mini" series of boards.
As a result, the stm32f1.md document is no longer relevant.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-23 18:53:11 -04:00
abdfd92e99
docs: Update release notes for v0.8.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-21 22:30:04 -04:00
dd9259aaf3
docs: Minor wording changes to Manual_level.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-16 16:48:50 -04:00
4811b58b39
docs: Update Manual_Level.md with recent config changes
...
The sample count and associated settings are no longer in the
screws_tilt_adjust config section - they are now in the probe config
section. Remove them from the guide.
Reported by @theopensourcerer.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-16 16:35:32 -04:00
dd77b46de9
docs: Note AD849x support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-15 13:08:43 -04:00
4ef0db5087
docs: Update Config_Change.md with safe_z_homing change
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-03 18:09:01 -04:00
27717440aa
docs: Update Sensorless_Homing.md with new TMCs ( #1958 )
...
Signed-off-by: Nils Schulte <git@nilsschulte.de>
2019-10-03 17:56:40 -04:00
698159921f
tuning_tower: Tool for tuning parameters based on print Z height
...
This adds a testing tool that can run a command on each Z layer of a
print.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-01 14:46:24 -04:00
1b8a007969
docs: Add a square_tower.scad and stl print object
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-01 14:46:24 -04:00
0c247e55e6
probe: Add range to probe accuracy results ( #2015 )
...
Signed-off-by: Julien Lirochon <julien@lirochon.net>
2019-09-29 16:56:46 -04:00
3a37d4a208
safe_z_home: Hop only if necessary and add option to move xy back
...
Once a hop is performed, it will only be re-issued if the z-axis has been
moved in the meantime. Usually it is only moved by a z-homing so doing so
will cause safe_z_home to do the hop on the next homing action.
When z-axis is homed, x and y positions are known. When setting this
boolean option, these are set back to their last positions.
Whenever a hop is specified it is re-issued after the Z axis has been
homed. This is especially necessary when a pressure-based probe is used.
Also, the module decides if a hop is necessary, based on either a known
Z position or a flag that is set whenever the motors are disabled.
Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
2019-09-18 09:37:33 -04:00
a78329d0b2
docs: Add additional "no delay" benchmarks to Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 10:37:25 -04:00
3a2d71038f
docs: Update stm32f103 benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 09:27:37 -04:00
7580fa2354
docs: Update sam4s8c benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 09:13:51 -04:00
8211415231
docs: Update sam4s8c step benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 01:12:11 -04:00
d90116ef39
docs: Use tables for tick rates in Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-08 00:48:01 -04:00
a344f6d2ad
docs: Update AVR benchmarks to use gcc v5.4.0
...
Current versions of OctoPi ship with avr-gcc v5.4.0, so update the
benchmarks to use that version.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-06 13:24:20 -04:00
f8b25a0104
docs: Update USB transfer benchmarks
...
It appears that the faster micro-controllers may have their transfer
speeds limited by the host USB controller. Rerun the usb transfer
benchmarks using a high-speed hub.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-06 13:07:08 -04:00
01d2183f59
docs: Add STM32F407 benchmarks to Features.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-09-05 22:42:48 -04:00
f00c50a893
docs: Add stm32f407 benchmarks to Benchmarks.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-31 20:51:26 -04:00
7598660542
docs: Sort transfer rate benchmark by rate
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 13:55:21 -04:00
d3bd4f9622
docs: Update benchmarks with stm32f446 usb test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-15 22:27:58 -04:00
43ab8e7113
docs: Fix typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 00:13:34 -04:00
4c09d8bf02
dotstar: Initial support for "dotstar" LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 19:44:32 -04:00
30bd7c0e47
docs: Update stm32f1.md document
...
Several restrictions documented in the stm32f1.md no longer apply.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:40:05 -04:00
485164b8b3
docs: Update MCU_Commands with schedule_soft_pwm_out changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-01 00:23:09 -04:00
7d4c475e52
docs: Update Features.md to note Duet2 Maestro support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 11:21:38 -04:00
a878831d5e
mcp4728: Update to better match printrbot revf requirements
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 11:02:56 -04:00
658088b753
docs: Add initial STM32F446 benchmark results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-25 18:18:42 -04:00
46041f5411
neopixel: Add support for daisy-chained chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-23 21:59:38 -04:00
197030c684
docs: Update FAQ to reference Bootloaders.md on "make flash" failure
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-22 10:07:34 -04:00
b7bc96c3b2
neopixel: Add initial support for "neopixel" leds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-12 21:44:01 -04:00
28aa2f507a
endstop: Rename mcu end_stop commands to endstop
...
Rename the commands.
The main reason for this change is to force a micro-controller code
updated (due to important bugfix in 7fefe52d
2019-07-12 08:10:53 -04:00
0343d0c73a
firmware_retract: Remove z_hop support
...
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.
The z_hop support is therefore being removed until these issues can be
fixed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 19:25:56 -04:00
364c22fe84
probe: Rework the PROBE_ACCURACY command parameters
...
Don't default to a Z location of 10, as that could cause damage if the
probe's z_offset is greater than 10. Instead, use the "retract
distance" method that is used for normal multi-sample probing.
Update the PROBE_ACCURACY command parameter names to use the same
parameter names as the PROBE command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-10 15:21:09 -04:00
d4d8bf795b
filament_switch_sensor: add SET_FILAMENT_SENSOR gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-07-10 09:57:46 -04:00
ea6f30bd99
docs: Update Protocol.md to use enumerations for pins
...
Now that pins use enumerations, update the set_digital_out command
examples.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-09 14:17:28 -04:00
e7dd313a96
docs: Add information on using OpenOCD to Bootloaders.md
...
Add information on using OpenOCD. Add information on flashing the
SAMD21 and SAMD51 with OpenOCD.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-09 13:37:17 -04:00
e19a41d0dd
docs: Add documentation for [delayed_gcode]
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-07-01 11:09:30 -04:00
57eb0e8975
docs: Update for latest changs to skew_correction
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-29 10:58:46 -04:00
3a3dfd51b9
docs: Add CLEAR_PAUSE to G-Codes.md
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-28 12:44:49 -04:00
d9d94c858a
docs: Add skew_correction.md to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-27 09:50:17 -04:00
a3b4543c97
skew_correction: add documentation
...
Signed-Off-By: Eric Callahan <arksine.code@gmail.com>
2019-06-26 20:16:35 -04:00
d9bddc35a1
docs: Add information on running the regression suite locally
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 17:59:23 -04:00
a2c7fd369c
docs: Note tmc2209 and tmc5160 support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:28:39 -04:00
ba27e0aa02
docs: Warn against using "PreloadVE" on KISSlicer
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:18:24 -04:00
83e6c01ada
probe: Allow probe parameters to be specified as g-code parameters
...
Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE,
SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE
command (and to commands that indirectly invoke a probe).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-21 14:44:28 -04:00
8cce3cc8e7
graphstats: Add support for interactive graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-19 21:12:26 -04:00
8b00580884
gcode_macro: Parse variable_X parameters using ast.literal_eval()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-07 19:33:31 -04:00
a541c2f60e
docs: Update Config_Changes.md with "samples" move to probe config section
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:15:47 -04:00
97adca18c4
docs: Update Delta_Calibrate.md with probe location bias info
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
e061029b3a
docs: Update Probe_Calibrate.md with information on common probe errors
...
Add a section describing PROBE_ACCURACY, describing probe location
bias, and describing probe temperature bias.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
5989f7a8a6
firmware_retraction: Implementation of tuneable G10/G11 firmware retraction ( #1617 )
...
This supports getting and setting of retraction parameters without
having to restart klippy.
Signed-off-by: Len Trigg <lenbok@gmail.com>
2019-06-06 09:10:09 -04:00
3f96c0abd8
docs: Minor wording change to Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 10:39:43 -04:00
962c48ecf7
docs: Fix github pages "liquid" rendering of Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 10:31:03 -04:00
94c1ad7241
docs: Add an initial Command_Templates.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
a68f577adf
gcode_macro: Add support for SET_GCODE_VARIABLE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
ac8f6dfe20
gcode_macro: Rename "status" helper to "printer"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
a238ec6f98
idle_timeout: Add SET_IDLE_TIMEOUT gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-04 09:46:26 -04:00
c54b8da530
gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands
...
Add commands to save and restore the current g-code state.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:23:56 -04:00
d6b69938ab
gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command
...
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command. (In particular,
when the following command is an extrude only move - as in
issue #1289.)
Don't apply the offset immediately. Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:19:15 -04:00
500f37821d
docs: Improve bltouch v3 documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:09:32 -04:00
c77285287b
docs: Try to be more clear that the "paper test" steps need to be run
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-24 22:44:00 -04:00
6c4c26c319
docs: Minor wording change to Bed_Level.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-23 19:31:44 -04:00
1856f95503
docs: Recommend OctoPrint 1.3.11 or later
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-20 23:01:04 -04:00
ad12ffa981
docs: Use markdown syntax for http links in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-20 17:19:33 -04:00
fd1dff3f02
docs: Fix numbering in FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-08 16:48:14 -04:00
73fd292637
docs: Update "avr restart=command" FAQ to point to bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-07 23:02:20 -04:00
8524602b6e
docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 23:10:32 -04:00
17dd6e5097
docs: Fix markdown table layout in html rendering
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:56:56 -04:00
b5f79d5e77
docs: Simplify main html page now that there is a logo
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:37:56 -04:00
57cf0759c0
docs: Add logos to web page
...
Also, move docs/index.md to docs/_layouts/home.html. Add a
docs/_layouts/README file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:35:35 -04:00
85c01d4b6a
docs: Minor node changes to klipper logo
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:42:40 -04:00
49b18a6be7
docs: Update logo so that edges overlap
...
Overlapping edges reduce the effects of anti-aliasing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:31:29 -04:00
9b960e63fb
docs: Add a Klipper logo
...
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:31:29 -04:00
6f34ba59cb
docs: Add an index page for the www.klipper3d.org website
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 22:00:35 -04:00
4739e28137
docs: Add a github pages html template
...
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 20:55:41 -04:00
64e7235e48
docs: Rewrite the Overview.md - just list documents by category
...
Replace the Overview.md document description with a list of documents
and a brief description of their contents. The goal is to make it
easier for users to find information.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 20:45:00 -04:00
cb04e4c45d
docs: Fix alignment of tmc2208.svg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 11:34:45 -04:00
c440c6b7aa
docs: Start of google pages _config.yml file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-15 11:04:23 -04:00
e3df39245f
docs: Fixup github pages
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 22:41:23 -04:00
8a6d415745
Update CNAME
2019-04-14 21:25:54 -04:00
b90a04a5cf
Create CNAME
2019-04-14 21:21:14 -04:00
63f8d8cc79
Set theme jekyll-theme-leap-day
2019-04-14 21:17:52 -04:00
8bc9f39c58
docs: Avoid using .. in markdown links
...
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 21:12:21 -04:00
04adde9a02
docs: Update Installation.md to point to list of supported ARM mcus
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-06 18:47:02 -04:00
de124677b0
docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:22:57 -04:00
9f9262cba8
docs: Minor wording changes to BLTouch.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:20:21 -04:00
54a2c5d58e
BLTouch: Use G90 in the BLTouch.md homing_override example
...
Reported by @sgtnoodle.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:49:58 -04:00
a5a6ae83ff
docs: Wrap BLTouch.md to 80 columns.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:48:51 -04:00
6318bdc99b
docs: Note the python software dependency update in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 11:20:36 -04:00
0615ab5f89
docs: Note the use of bus enumerations in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:30:04 -04:00
be6b29fabf
sx1509: Convert code to use generic i2c bus support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:30 -04:00
9bd3e80421
docs: Note that graphstats.py can produce different types of graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 22:24:45 -04:00
2980c2e12c
docs: Minor wording change in MCU_Commands.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 22:04:56 -04:00
c30a6f2e6b
docs: Update Protocol documentation with enumerations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 21:41:33 -04:00
b35e07ca2b
docs: STM32F0 benchmarks ( #1462 )
...
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
2019-03-29 09:38:54 -04:00
c105adc80b
temperature_fan: Fix. Temperature fan min speed should be used ( #1405 )
...
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-03-28 14:07:40 -04:00
c7330e07a4
stm32f0: Various fixes according to comment: ( #1453 )
...
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
2019-03-28 10:21:51 -04:00
312cabc3f7
docs: Move benchmark information from Debugging.md to new Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-28 09:52:06 -04:00
de7444ca69
docs: Remove spurious executable flag from documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-24 12:17:12 -04:00
b79db3e3d6
docs: Documentation draft for STM32F0
...
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
2019-03-24 12:10:11 -04:00
9aadc3c7fa
docs: Also note that driver_VSENSE was removed from tmc2660 driver
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 22:40:42 -04:00
efab177645
docs: Note tmc2660 driver_HEND default change from 6 to 3
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 20:41:32 -04:00
0980b7e4ec
tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands ( #1419 )
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-22 20:37:03 -04:00
06c0463d44
Update sensorless homing documentation to disable second home
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-19 10:55:59 -04:00
b28e95ca1a
command: Always pass a string to the DECL_CONSTANT() macro
...
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
12f6513ba2
docs: Recommend OctoPi v0.16.0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-11 22:13:04 -04:00
96c4e1c5a0
docs: Update atsam usb transfer benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 21:59:18 -04:00
d3f6dad853
controller_fan: Allow multiple controller_fan sections to be defined
...
It may be necessary to define multiple fans, so allow each config
section to be named.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
5c0a2479be
screws_tilt_adjust: Add new screws_tilt_adjust tool ( #1367 )
...
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
2019-03-08 11:47:17 -05:00
563bc37073
tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL
...
Use the field names from the trinamic specification. This makes the
field similar to all the other driver_XXX config options.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:25:19 -05:00
Kevin O'Connor
Marco D'Alessio
Stefan Dej
Evgenii
Christian S
Jordan Woyak
Arksine
Alan Lord
Lane Roberts
Dmitry Butyugin
Thomas Kroll
Jarad Olson
Janar Sööt
Justin Schuh
Pascal Pieper
Al
Martin Hierholzer
Guy Shapira
Paul McGowan
Adrian Keet
alocin73
Bryan Boettcher
Trevor Jones
bondus
Elton Law
Martin Nowroth
Denis Ignatenko
Lucio Tarantino
Florian Heilmann
theophile
matpab
Dushyant Ahuja
David Smith
Jeremy Briffaut
Garth Snyder
FanDjango
BlackStump
Simon Kühling
Nils Schulte
Julien Lirochon
Master92
Len Trigg
Eugene Krashtan
Douglas Hammond
Eugene Krashtan
amblidex
Frank Kang
Rui Caridade