This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work)
Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
Introduce support for the stock Creality CR10 v3 printer, including the filament runout sensor. It also supports the optional BLTouch.
Signed-off-by: Luís Palma Nunes Mendes <luis.p.mendes@gmail.com>
Create configuration file for Fly-Gemini-v1 motherboard
Add stm32f405 and generic-mellow-fly-gemini-v1.cfg to test cases
Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
* Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg
I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed.
-Added detailed instructions for flashing in the header.
-Corrected rotation distances for axes, it was wrong.
-Added gear ratio for extruder that is useful for future changes.
-Added heater fan to HE1 pins for automatic shutdown with temp.
-Reduced speed and accel for Z since a 2mm screw is used.
* Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg
I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change.
The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option.
Signed-off-by: Lorenzo Cascone <laurienzudesign@gmail.com>
This file includes the build instructions and generic configuration for the TH3D EZBoard Lite v2.0 3d printer control board.
Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
This commit contains a configuration for the Anycubic Vyper printer from 2021.
It uses a clone of the STM32F103 chip named GD32F103.
There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has
been tested with the v0.0.6 only. It should probably work for v0.0.5 as well
since there are no different changes in the Anycubic Marlin firmware.
The LCD is not supported yet (might work, but didn't try yet).
Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw>
Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>
This config I created and fully tested on my own printer Anycubic 4Max Pro 2.0. This works fine! Please note that this printer is different from the Anycubic 4MAX.
Signed-off-by: Alexander Usachev <int_0x21@protonmail.com>
This config was a community effort and was author and tested by sihawken, 3D.Subzwari & dapostol73.
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
Information and some lines verbatim were sourced from the official BigTreeTech Octopus
GitHub repository to make this configuration as well as existing configurations in the same
folder as this one
Signed-off-by: Charles Pickering <charles.pickering@live.com>
Adds Duet3 Mini Config with support for expansion header
Signed-off-by: Luke Ashley <Luke@Lukeslab.online>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add support for the Creality CR-30 'PrintMill', and its base board,
the Creality v4.2.10.
Add them to the `test/klippy/printers.test` test suite
Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
Rui Carmo
Kevin O'Connor
S1NH
CoreRasurae
Fisheiyy
kluoyun
laurienzu
iblue
SyrasX
Spencer Owen
Apulo
just-trey
Lorenzo
adelyser
gjsmo
Manuel Fichtner
Peter Pan's Techland
int_0x03
Pedro Lamas
Demetrius Apostolopoulos
charlespick
charlespick
Joseph Orduna
github@matthewlloyd.net
Luke's Lab
Jason S. McMullan
Tircown
George Fu