mirror of https://github.com/Desuuuu/klipper.git
config: Creality CR10 v3 with BLTouch support config. (#5533)
Introduce support for the stock Creality CR10 v3 printer, including the filament runout sensor. It also supports the optional BLTouch. Signed-off-by: Luís Palma Nunes Mendes <luis.p.mendes@gmail.com>
This commit is contained in:
CoreRasurae
GitHub
parent
c61db45613
commit
31f9bbf105
|
|
@ -0,0 +1,169 @@
|
|||
# This file contains common pin mappings for the 2020 Creality
|
||||
# CR-10 V3. The mainboard is a Creality 3D v2.5.2 (8-bit mainboard
|
||||
# with ATMega2560).
|
||||
# To use this config, the firmware should be compiled for the
|
||||
# AVR atmega2560.
|
||||
#
|
||||
# To flash do "make flash" and if it does not and avrdude also
|
||||
# does not work then one may need to flash a bootloader to the
|
||||
# board - see the Klipper docs/Bootloaders.md file for more
|
||||
# information.
|
||||
#
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
#
|
||||
# For better compatibility with GCodes generated for Marlin, you
|
||||
# may wish to add the following section, if you have BLTouch:
|
||||
#[gcode_macro G29]
|
||||
#gcode:
|
||||
# BED_MESH_CALIBRATE
|
||||
#
|
||||
#
|
||||
[stepper_x]
|
||||
step_pin: PF0 #ar54
|
||||
dir_pin: PF1 #ar55
|
||||
enable_pin: !PD7 #!ar38
|
||||
microsteps: 16
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PE5 #^ar3
|
||||
position_endstop: 0
|
||||
position_max: 300
|
||||
homing_speed: 50
|
||||
|
||||
[stepper_y]
|
||||
step_pin: PF6 #ar60
|
||||
dir_pin: PF7 #ar61
|
||||
enable_pin: !PF2 #!ar56
|
||||
microsteps: 16
|
||||
rotation_distance: 40
|
||||
endstop_pin: ^PJ1 #^ar14
|
||||
position_endstop: 0
|
||||
position_max: 300
|
||||
homing_speed: 50
|
||||
|
||||
[stepper_z]
|
||||
step_pin: PL3 #ar46
|
||||
dir_pin: !PL1 #!ar48
|
||||
enable_pin: !PK0 #!ar62
|
||||
microsteps: 16
|
||||
rotation_distance: 8
|
||||
position_max: 400
|
||||
#Uncomment if you have a BL-Touch:
|
||||
#position_min: -4
|
||||
#endstop_pin: probe:z_virtual_endstop
|
||||
#and comment the follwing lines:
|
||||
position_endstop: 0.0
|
||||
endstop_pin: ^PD3 #ar18
|
||||
|
||||
[safe_z_home]
|
||||
home_xy_position: 104.25,147.6
|
||||
speed: 80
|
||||
z_hop: 10
|
||||
z_hop_speed: 10
|
||||
|
||||
[extruder]
|
||||
step_pin: PA4 # ar26
|
||||
dir_pin: !PA6 # !ar28
|
||||
enable_pin: !PA2 # !ar24
|
||||
microsteps: 16
|
||||
rotation_distance: 7.7201944 # 16 microsteps * 200 steps/rotation / steps/mm
|
||||
#Correction formula is new_rotation_distance = old_rotation_distance * mmsExtracted / 100.0
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
heater_pin: PB4 #ar10
|
||||
sensor_type: EPCOS 100K B57560G104F
|
||||
sensor_pin: PK5 #analog13
|
||||
control: pid
|
||||
pid_kp: 22.107
|
||||
pid_ki: 1.170
|
||||
pid_kd: 104.458
|
||||
min_temp: 0
|
||||
max_temp: 255
|
||||
|
||||
[heater_bed]
|
||||
heater_pin: PH5 #ar8
|
||||
sensor_type: ATC Semitec 104GT-2
|
||||
sensor_pin: PK6 #analog14
|
||||
control: pid
|
||||
#Stock PID configuration taken from Marlin
|
||||
pid_Kp: 201.86
|
||||
pid_Ki: 10.67
|
||||
pid_Kd: 954.96
|
||||
min_temp: 0
|
||||
max_temp: 130
|
||||
|
||||
[fan]
|
||||
pin: PH6 #ar9
|
||||
|
||||
[mcu]
|
||||
serial: /dev/ttyUSB0
|
||||
|
||||
[printer]
|
||||
kinematics: cartesian
|
||||
max_velocity: 300
|
||||
max_accel: 3000
|
||||
max_z_velocity: 5
|
||||
max_z_accel: 100
|
||||
|
||||
[display]
|
||||
lcd_type: st7920
|
||||
cs_pin: PH1 #ar16
|
||||
sclk_pin: PA1 #ar23
|
||||
sid_pin: PH0 #ar17
|
||||
encoder_pins: ^PC4, ^PC6 #^ar33, ^ar31
|
||||
click_pin: ^!PC2 #^!ar35
|
||||
|
||||
|
||||
#Uncomment the following lines if you have a BL-Touch
|
||||
#[bltouch]
|
||||
#sensor_pin: ^PD2 #^ar19
|
||||
#control_pin: PB5 #ar11
|
||||
#set_output_mode: 5V
|
||||
#pin_move_time: 0.4
|
||||
#stow_on_each_sample: False
|
||||
#probe_with_touch_mode: False
|
||||
#x_offset: 45.75
|
||||
#y_offset: -3.40
|
||||
#z_offset: 3.28
|
||||
#samples: 2
|
||||
#sample_retract_dist: 2
|
||||
#samples_result: average
|
||||
|
||||
#Uncomment the following lines if you have a BL-Touch
|
||||
#[bed_mesh]
|
||||
#speed: 50
|
||||
#horizontal_move_z: 6
|
||||
#mesh_min: 46.50,0.75
|
||||
#mesh_max: 253.5,295.85
|
||||
#probe_count: 7,7
|
||||
#algorithm: bicubic
|
||||
|
||||
[pause_resume]
|
||||
recover_velocity: 50
|
||||
|
||||
[filament_switch_sensor fil_runout_sensor]
|
||||
pause_on_runout: True
|
||||
switch_pin: PE4 #ar2
|
||||
|
||||
[bed_screws]
|
||||
screw1: 33,29
|
||||
screw1_name: front left screw
|
||||
screw2: 273,29
|
||||
screw2_name: front right screw
|
||||
screw3: 273,269
|
||||
screw3_name: rear right screw
|
||||
screw4: 33,269
|
||||
screw4_name: rear right screw
|
||||
|
||||
#Uncomment the following lines if you have a BL-Touch
|
||||
#[screws_tilt_adjust]
|
||||
#screw1: 0,29
|
||||
#screw1_name: front left screw
|
||||
#screw2: 228,29
|
||||
#screw2_name: front right screw
|
||||
#screw3: 228,269
|
||||
#screw3_name: rear right screw
|
||||
#screw4: 0,269
|
||||
#screw4_name: rear right screw
|
||||
#speed: 50
|
||||
#horizontal_move_z: 10
|
||||
#screw_thread: CW-M3
|
||||
|
|
@ -57,6 +57,7 @@ CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
|
|||
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
|
||||
CONFIG ../../config/printer-wanhao-duplicator-6-2016.cfg
|
||||
CONFIG ../../config/printer-wanhao-duplicator-9-2018.cfg
|
||||
CONFIG ../../config/printer-creality-cr10-v3-2020.cfg
|
||||
|
||||
# Printers using the atmega1280
|
||||
DICTIONARY atmega1280.dict
|
||||
|
|
|
|||
Loading…
Reference in New Issue