Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config/printer-wanhao-duplicator-9...

109 lines
1.8 KiB
INI
Raw Permalink Normal View History

config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
# This file contains pin mappings for the Wanhao Duplicator 9 MK1,
# also sold as the Monoprice Maker Pro MK1. To use this config,
# the firmware should be compiled for the AVR atmega2560.
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 00:47:32 +01:00
# See docs/Config_Reference.md for a description of parameters.
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
[stepper_x]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PF7
dir_pin: !PK0
enable_pin: !PF6
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 40
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
endstop_pin: ^!PF0
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
position_endstop: 0
position_max: 295
homing_speed: 30.0
[stepper_y]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PK2
dir_pin: PK3
enable_pin: !PE4
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 40
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
endstop_pin: ^!PA2
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
position_endstop: 0
position_max: 290
homing_speed: 30.0
[stepper_z]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PK5
dir_pin: PK7
enable_pin: !PK4
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 8
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
endstop_pin: probe:z_virtual_endstop
position_max: 370
position_min: -0.99
[extruder]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PF4
dir_pin: PF5
enable_pin: !PF3
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 31.936
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
nozzle_diameter: 0.4
filament_diameter: 1.75
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
heater_pin: PG5
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
sensor_type: EPCOS 100K B57560G104F
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
sensor_pin: PF1
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
control: pid
pid_Kp: 33.41
pid_Ki: 1.47
pid_Kd: 189.27
min_temp: 0
max_temp: 315
[heater_bed]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
heater_pin: PE5
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
sensor_type: EPCOS 100K B57560G104F
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
sensor_pin: PK6
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
control: pid
pid_Kp: 64.095903
pid_Ki: 1.649830
pid_Kd: 622.531455
min_temp: 0
max_temp: 120
[fan]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
pin: PE3
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
[probe]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
pin: !PH3
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
x_offset: 27
y_offset: 3
z_offset: 1.4
speed: 5.0
samples: 2
sample_retract_dist: 2.0
samples_result: average
[mcu]
serial: /dev/ttyUSB0
[printer]
kinematics: cartesian
max_velocity: 3000
max_accel: 450
max_z_velocity: 225
max_z_accel: 30
square_corner_velocity: 15.0
[bed_mesh]
speed: 120
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
mesh_min: 27, 3
mesh_max: 270, 290
probe_count: 5, 3
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
horizontal_move_z: 10
[bed_screws]
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
screw1: 5, 5
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
screw1_name: front left screw
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
screw2: 295, 0
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
screw2_name: front right screw
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
screw3: 295, 290
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
screw3_name: back right screw
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
screw4: 0, 290
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
screw4_name: back left screw
probe_height: 0