Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config/printer-wanhao-duplicator-9...

109 lines
1.8 KiB
INI
Raw Normal View History

config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
# This file contains pin mappings for the Wanhao Duplicator 9 MK1,
# also sold as the Monoprice Maker Pro MK1. To use this config,
# the firmware should be compiled for the AVR atmega2560.
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 00:47:32 +01:00
# See docs/Config_Reference.md for a description of parameters.
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
[stepper_x]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PF7
dir_pin: !PK0
enable_pin: !PF6
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 40
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
endstop_pin: ^!PF0
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
position_endstop: 0
position_max: 295
homing_speed: 30.0
[stepper_y]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PK2
dir_pin: PK3
enable_pin: !PE4
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 40
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
endstop_pin: ^!PA2
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
position_endstop: 0
position_max: 290
homing_speed: 30.0
[stepper_z]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PK5
dir_pin: PK7
enable_pin: !PK4
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 8
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
endstop_pin: probe:z_virtual_endstop
position_max: 370
position_min: -0.99
[extruder]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
step_pin: PF4
dir_pin: PF5
enable_pin: !PF3
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 31.936
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
nozzle_diameter: 0.4
filament_diameter: 1.75
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
heater_pin: PG5
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
sensor_type: EPCOS 100K B57560G104F
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
sensor_pin: PF1
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
control: pid
pid_Kp: 33.41
pid_Ki: 1.47
pid_Kd: 189.27
min_temp: 0
max_temp: 315
[heater_bed]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
heater_pin: PE5
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
sensor_type: EPCOS 100K B57560G104F
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
sensor_pin: PK6
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
control: pid
pid_Kp: 64.095903
pid_Ki: 1.649830
pid_Kd: 622.531455
min_temp: 0
max_temp: 120
[fan]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
pin: PE3
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
[probe]
config: Don't use arduino mega aliases in example config files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-19 17:52:21 +01:00
pin: !PH3
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
x_offset: 27
y_offset: 3
z_offset: 1.4
speed: 5.0
samples: 2
sample_retract_dist: 2.0
samples_result: average
[mcu]
serial: /dev/ttyUSB0
[printer]
kinematics: cartesian
max_velocity: 3000
max_accel: 450
max_z_velocity: 225
max_z_accel: 30
square_corner_velocity: 15.0
[bed_mesh]
speed: 120
config: add mesh_min to printer-wanhao-duplicator-9-2018.cfg (#2525) This is a small change I forgot to make when copying my config to this template. Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-18 02:59:08 +01:00
mesh_min: 27,3
config: Add Wanhao Duplicator 9 MK1 (#2497) Also applies to the Monoprice Maker Pro MK1. This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis) found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I only had to change a few things: - updated key names for min_point and max_point to mesh_min and mesh_max - enabled PID control - tweaked bounds to allow movement during mesh leveling - removed all comments - decreased homing speed slightly - sane bed mesh sample defaults In response to Kevin O'Connor: - remove pressure_advance setting from extruder section - remove respond section - remove pause_resume section Signed-off-by: Matt Shirley <mdshw5@gmail.com>
2020-02-14 02:52:31 +01:00
mesh_max: 270,290
probe_count: 5,3
horizontal_move_z: 10
[bed_screws]
screw1: 5,5
screw1_name: front left screw
screw2: 295,0
screw2_name: front right screw
screw3: 295,290
screw3_name: back right screw
screw4: 0,290
screw4_name: back left screw
probe_height: 0