This commit replaces all `with_stub` calls and
explicitly calls `make_stub` instead.
The `with_stub` helper does not add much clarity
hence we now use scoped stub objects instead.
This de-indents some blocks where scoping isn't
required, for example when there is a single
stub object inside a `run_test` function.
With this change, we also need to explicitly
assert `num_calls`.
These are still kind of a mess.
The old code combined the worst of both worlds:
- we had one monolithic test
- we called the events multiple times,
verifying a different stub each time
Now I make the tests more granular.
We could actually re-combine the tests, but
in a nicer way, so that we just set
up multiple stubs and verify that all stubs
get correctly invoked.
We still need to write to these globals with set_global because the
code being tested reads from them, but the tests themselves should
never need to read from them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We now use the same code in all places to
get the bucket of user_ids that correspond
to a stream, and we consistently treat
a stream as having zero subscribers, not
an undefined number of subscribers, in
the hypothetical case of us asking about
a stream that we're not tracking.
The behavior for untracked streams has
always been problematic, since if a
stream is untracked, all bets are off.
So now if we don't "track" the stream,
the subscriber count is zero. None of
our callers distinguish between undefined
and zero.
And we just consider the stream to be subscribed
by a user when add_subscriber is called,
even if we haven't been told by stream_data
to track the stream. (We also stop
returning true/false from add_subscriber,
since only test code was looking at it.)
We protect against the most likely source
of internal-to-the-frontend bugs by adding
the assert_number() call.
We generally have to assume that the server
is sending us sensible data at page load
time, or all bets are off.
And we have good protections in place
for unknown ids in our dispatch code
for peer_add/peer_remove events.
This de-clutters stream_data a bit. Since our
peer data is our biggest performance concern,
I want to contain any optimizations to a fairly
well-focused module.
The name `peer_data` is a bit of a compromise,
since we already have `subs.js` and we use
`sub` as a variable name for stream records
throughout our code, but it's consistent with
our event nomenclature (peer/add, peer/remove)
and it's short while still being fairly easy
to find with grep.
This sets us up to use better system-wide data structures
for tracking subscribers.
Basically, instead of storing subscriber data on the
"sub" objects in stream_data.js, we instead have a
parallel data structure called stream_subscribers.
We also have stream_create, stream_edit, and friends
use helper functions rather than accessing
sub.subscribers directly.
ES and TypeScript modules are strict by default and don’t need this
directive. ESLint will remind us to add it to new CommonJS files and
remove it from ES and TypeScript modules.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Prior to commit eb4a2b9d4e the center
area of the navbar was based on a structure that appended crumbs or
"tabs" as <li>s, forming a tab_bar and a tab_list.
However, in eb4a2b9d4e we apply a new
style and structure to the navbar which lets go of the convention of
tabs. Hence, we'd like to purge the tab_bar and tab_list labels from
our code base.
We purged tab_list in 1267caf5009118875f47fdafe312880af08024e1.
This commit purges tab_bar, it includes:
- A blanket search and replace of tab_bar with message_view_header.
- Splitting a single line comment in
tab_bar.js / message_view_header.js.
- The renaming of tab_bar.js to message_view_header.js.
- The renaming of tab_bar.hbs to message_view_header.hbs.
- A blanket search and replace of tab_data with
message_view_header_data.
- Replacing the single occurrence of tabbar with message_view_header
(it was within a comment.)
This forces us to more explicitly document at the
top of the file what dependencies we are stubbing,
plus it's less magical.
Also, we may want to do occasional audits of
set_global to clean up places where we mock
things like stream_data, which are probably just
easier to use the real version of now that we
have cleaner APIs to set up stream data.
The modules most affected by this change are our
dispatch-oriented tests--basically, all the
modules that test handling of Zulip events
plus hotkey.js.
Prettier would do this anyway, but it’s separated out for a more
reviewable diff. Generated by ESLint.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Prettier would do this anyway, but it’s separated out for a more
reviewable diff. Generated by ESLint.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Previously, the navbar sub count would not live update as users
subscribed or unsubscribed, this commit adds the relevant calls in
stream events.
It would have been better to just have a single call within
server_events_dispatch but it seems difficult due to the way of
mark_subscribed and mark_unsubscribed are structured.
stream_events.mark_unsubscribed conditionally calls
subs.update_settings_for_unsubscribed which calls
subs.rerender_subscriptions_settings and as such handles the update
for the subscriptions modal on its own. Hence, we simply rely on the
stream_data.update_calculated_fields to ensure the subscriber counts
are updated and make a call to
tab_bar.maybe_rerender_title_area_for_stream(sub).
stream_events.mark_subscribed is similar.
Previously, we were overriding narrow_state.is_for_stream_id() to make
sure we test the functions we intend to.
In this commit we:
* zrequire('narrow_state')
* set the filter to "stream:frontend" before the test cases which
were overriding is_for_stream_id to return true (and remove the
overrides).
* reset_current_filter() at the end of the above cases (and remove
the lines overriding is_for_stream_id to return false)
This is a prep commit to adding live update for sub_count in the
navbar.
Thsi commit changes stream_data.add_subscriber to use stream_id
instead of stream name. We are using stream ids so that we can
avoid bugs related to live update after stream rename.
This commit adds message retention policy details in the subscription_type
text below the stream description.
We do not show any text when realm-level settings is set to forever and
stream-level is set to either forever or realm_default.
This commit adds frontend support for setting and updating message
retention days of a stream from stream settings.
Message retention days can be changed from stream privacy modal of the
stream and can be set from stream_creation_form while creating streams.
Only admins can create streams with message_retention_days value other
than realm_default.
This commit also contains relevant changes to docs.
The stream_events tests were kinda messy, but
I mostly just consolidated a few sections of
code so that we didn't have to keep
re-stubbing the same functions.
For the actual code, I extracted add_sidebar_row
and then removed the unnecessarily complicated
jQuery trigger mechanisms.
The UI in the `#settings/notifications` page is updated similarly
to what is done in the `update_global_notifications` path present
in the `server_events_dispatch` file.
Explicitly stubbing i18n in 48 different files
is mostly busy work at this point, and it doesn't
provide much signal, since often it's invoked
only to satisfy transitive dependencies.
We just get the stream_name from the sub struct now.
This mostly affects node tests.
The only place in real code where we called add_sub()
was when we initialized data from the server.
This commit includes a new `stream_post_policy` setting,
by replacing the `is_announcement_only` field from the Stream model,
which is done by mirroring the structure of the existing
`create_stream_policy`.
It includes the necessary schema and database migrations to migrate
the is_announcement_only boolean field to stream_post_policy,
a smallPositiveInteger field similar to many other settings.
This change is done to allow organization administrators to restrict
new members from creating and posting to a stream. However, this does
not affect admins who are new members.
With many tweaks by tabbott to documentation under /help, etc.
Fixes#13616.
Adds required API and front-end changes to modify and read the
wildcard_mentions_notify field in the Subscription model.
It includes front-end code to add the setting to the user's "manage
streams" page. This setting will be greyed out when a stream is muted.
The PR also includes back-end code to add the setting the initial state of
a subscription.
New automated tests were added for the API, events system and front-end.
In manual testing, we checked that modifying the setting in the front end
persisted the change in the Subscription model. We noticed the notifications
were not behaving exactly as expected in manual testing; see
https://github.com/zulip/zulip/issues/13073#issuecomment-560263081 .
Tweaked by tabbott to fix real-time synchronization issues.
Fixes: #13429.
This commit was originally automatically generated using `tools/lint
--only=eslint --fix`. It was then modified by tabbott to contain only
changes to a set of files that are unlikely to result in significant
merge conflicts with any open pull request, excluding about 20 files.
His plan is to merge the remaining changes with more precise care,
potentially involving merging parts of conflicting pull requests
before running the `eslint --fix` operation.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Delete trailing newlines from all files, except
tools/ci/success-http-headers.txt and tools/setup/dev-motd, where they
are significant, and static/third, where we want to stay close to
upstream.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Add `name` attribute to stream settings `input` elements
and change `id` attribute corresponding to name.
`name` attribute stores value of settings name which is
stored in frontend data sets.
Previously, when a new stream was created on a client other than the
current one, the browser would first receive the "stream_created"
event, and make up a client-side display color at that time to use in
the "stream settings" view (it doesn't yet know the color that was
selected when the user was actually subscribed, because it doesn't
even know yet that the user is being subscribed to this stream), and
then moments after it'll receive a "susbcribe" event letting the
client know that the user is subscribed (and specifying the color to
use).
However, due to an argument not being passed through properly and a
missing rerender, we were not properly updating either the data
structures or doing a stream colors rerender in order to show the new
color.
This fixes the issue reported in
https://chat.zulip.org/#narrow/stream/48-mobile/subject/stream.20colors/near/660170
Abhijeet Prasad Bodas
Steve Howell
Anders Kaseorg
Priyank Patel
YashRE42
sahil839
clarammdantas
Ryan Rehman
Steve Howell
Nat1405
Anders Kaseorg
Yashashvi Dave
Tim Abbott