I only renamed references that I thought were absolutely necessary
and only if the resulting sentence structure wasn't awkward.
If the renaming resulted in awkward structure, I replaced the term
"webhook" with "integration" (but only in some very obvious cases).
Fixes#9500.
The big changes here are:
* Making the install instructions easier to copy/paste.
* Adding numbering for the IRc integration. We probably want to do a
similar thing with Matrix, too.
Makes the i18n strings in this file much easier to translate by splitting
them into smaller chunks (which avoids having a lot of code in the tagged
strings), and adds a string that was missing as well.
Based on an original version written by Rishi, but this has been
basically rewritten by tabbott.
We also clean up one confusing part of our Slack docs.
The Botserver uses section headers in the flaskbotrc to
determine which bot to run. Silently setting the section
headers to a bot's username is confusing and makes it
harder for Botserver users to figure out how to get the
Botserver to run the bots they want. This commit empties
all flaskbotrc section headers and thus makes the assignment
of bots explicit and mandatory.
Previously, the Botserver determined which bot to run for an
outgoing webhook by dispatching on a different URL endpoint
for each bot. Now, instead, the Botserver determines which bot
to run by the section header of the bot in the flaskbotrc.
This commit makes the frontend provide the new flaskbotrc
and updates the setup steps for the Botserver in the docs.
Fixes#9516.
Scrollbar appeared in the subdomain input box while registering an
org. This is a hacky solution to the problem and doesn't work for
long domain names. A proper fix for the same should be provided in
the future.
This should significantly improve the user experience for creating
additional accounts on zulipchat.com.
Currently, disabled in production pending some work on visual styling.
UnexpectedWebhookEventType is a generic exception that we may
now raise when we encounter a webhook event that is new or one
that we simply aren't aware of.
This adds a tour of Zulip to the bottom of the homepage.
In order to get the carousel nave, we use Bootstrap 2 from a CDN on
this page; this isn't ideal in the medium term, but upgrading
Bootstrap across the project is too much work for now.
Fixes#9433.
Extra bottom margin was observed when using `compose_error` which
was caused by paragraphs in bootstrap having a bottom margin of 10px.
The paragraph tag has been replaced by a span tag.
Fixes#9182. Adds a link to the keyboard shortcuts popup at the
bottom-right corner of the right sidebar. A tooltip saying
`Keyboard Shortcuts(?)` has been added to the icon. The icon is
positioned using `position: fixed`.
We were devoting too much space/text to documenting our Markdown
macro. It is much more concise to just have a description and a
link to an example doc for each major macro.
This fixes several super-confusing things in these docs. Bot services
aren't a user-facing concept, and also, you need the URL before
creating the bot users.
The Python bindings (which are used for bots, amongst other things) can
be configured either with a .zuliprc file or with environment variables
in the host machine.
This new page in the user docs explains how to set the bindings up using
both techniques, and is a good reference on the setup required by Zulip
bots.
This commit moves the stylesheets under the archive bundle in
the Django pipeline to being compiled by webpack instead. It
also removes a remaining call to a portico stylesheet that no
longer exists.
This commit transitions landing-page.css from the Django pipeline
to being compiled by webpack as landing-page.scss under the
'landing-page' and 'integration' bundles.
This commit transitions all styles in app.css in the Django pipeline
to being compiled by webpack in an app-styles bundle, and renames the
various files to now be processed as SCSS.
To implement this transition, we move the old CSS file refernces in
settings.py and replace them with a bundle declared in
`webpack.assets.json` and includedn in the index.html template
Tweaked by tabbott to keep the list of files in `app.css` in
`webpack.assets.json`, and to preserve the ordering from the old
`settings.py`.
This is done because the current column-left and column-right were
actually just floating left and right and making use of float-left
and float-right makes more sense. This also helps with the upcoming
public archives feature which will try to include portico content
with main app content.
We haven't seen significant traffic from the legacy desktop app in
over a year, and users using it get a warning to upgrade since last
summer, so it's probably OK to stop providing special fonts for it.
Combines, both portico js and css into one bundle. This for now solve
the issue of an empty js bundle being generated by webpack for the
portico-styles stylesheet.
It's actually "subscription" and "message" (neither is plural).
While we're at it, we should also remove the "pointer" event type,
since that's of generally low interest.
static/styles/scss/portico.scss is now compiled by webpack
and supports SCSS syntax.
Changed the server-side templates to render the portico-styles
bundle instead of directly requiring the portico stylesheet. This
allows webpack to handle stylesheet compilation and minification.
We use the mini-css-extract-plugin to extract out css from the
includes in webpack and let webpacks production mode handle
minification. Currently we're not able to use it for dev mode
because it does not support HMR so we use style-loader instead.
Once the plugin supports HMR we can go on to use it for both
dev and prod.
The downside of this is that when reloading pages in the development
environment, there's an annoying flash of unstyled content :(.
It is now possible to make a change in any of the styles included
by static/styles/scss/portico.scss and see the code reload live
in the browser. This is because style-loader which we currently
use has the module.accept code built-in.
We started doing this for install docs in de2a2d0df, because `latest`
wasn't suitable and because I didn't know about readthedocs's `stable`
feature. The result has been that even with a checklist item, we
don't reliably update the link.
Instead, use the special `stable` version identifier on readthedocs to
link automatically to the highest version it knows about.
Tweaked by tabbott to add a test and fix a super subtle issue with the
relative_settings_link variable having been set once the first time a
/help article was rendered.
A common path is a new user goes to realm_uri, which redirects to
realm_uri/login, and clicks the google auth button thinking it is a
registration button.
This commit just changes the wording on the page they land on to be
friendlier for that use case.
Apparently, essentially every one of our landing pages extending
portico.html had two copies of portico.css included in their head
section; one from porticocustomhead (or the super of customhead) and
the other directly included.
Clean this up by removing all these duplicate inclusions of the
portico stylesheet.
We use the attrs property provided by render_bundle function of
django-webpack-loader to add `nonce="<csp_nonce_val_here>" to
js scripts being rendered by webpack.
This should make it easier to find the templates that are actually
part of the core webapp, instead of having them all mixed together
with the portico pages.
The main change here is to send a proper confirmation link to the
frontend in the `confirm_continue_registration` code path even if the
user didn't request signup, so that we don't need to re-authenticate
the user's control over their email address in that flow.
This also lets us delete some now-unnecessary code: The
`invalid_email` case is now handled by HomepageForm.is_valid(), which
has nice error handling, so we no longer need logic in the context
computation or template for `confirm_continue_registration` for the
corner case where the user somehow has an invalid email address
authenticated.
We split one GitHub auth backend test to now cover both corner cases
(invalid email for realm, and valid email for realm), and rewrite the
Google auth test for this code path as well.
Fixes#5895.
`<td>` elements are fixed-width, so we refactor the entire
`<table>` structure for responsive design.
This fixes a bug with how the `To:` block looks in other languages.
Fixes#9152.
In this commit:
Two new URLs are added, to make all realms accessible for server
admins. One is for the stats page itself and another for getting
chart data i.e. chart data API requests.
For the above two new URLs corresponding two view functions are
added.
This doesn't look amazing, but it's better than not linking to the
blog, and adding a 6th line both makes the footer excessive and also
breaks some styling in pages like /login that assume a fixed footer
height.
This is important because we intent to start using CSP in our main
app which means dropping of any inline event handlers
(onclick="...", onerror="...") and <a href="javascript:...">
links that can be used to run scripts.
We make some specific cases of tags use 2 space indents.
The case description:
* A tag with opening tag spread over multiple lines and closing tag
on the same line as of the closing angle bracket of the opening tag.
* A tag with opening tag spread over multiple lines and closing tag
not on the same line as of the closing angle bracket of the opening
tag.
Example:
Case 1:
Not linted:
<button type="button"
class="btn btn-primary btn-small">{{t "Yes" }}</button>
After linting:
<button type="button"
class="btn btn-primary btn-small">{{t "Yes" }}</button>
Case 2:
Before linting:
<div class = "foo"
id = "bar"
role = "whatever">
{{ bla }}
</div>
After linting:
<div class = "foo"
id = "bar"
role = "whatever">
{{ bla }}
</div>
* Removes the confusing notes about supporting only the Slack standard
plan.
* Removes the confusing notes about importing users from a
different organization.
* Clarifies a few sections, improves formatting, etc.
Still some errors (e.g. "Hover over a message to replace the message's
timestamp with its message actions" is no longer correct), and a lot of
other improvements to be made, but just doing a quick fix of a few things I
noticed.
Now that we have support for displaying custom profile fields, this
adds administrator-level support for creating them.
Tweaked by tabbott to fix a few small bugs and clean up the commit message.
Fixes#1760.
An integration with RSS can be much easier to set up with Zapier.
Since the current RSS integration predates Zapier, we should at
least mention that there is an easier way to set it up via
Zapier!
webhook-errors.log file is cluttered with Stream.DoesNotExist
errors, which hides the errors that we actually need to see. So,
since check_message already sends the bot_owner a PM if the webhook
bot tries to send a message to a non-existent stream, we can ignore
such exceptions.
It's possible that this won't work with some versions of the
third-party backend, but tabbott has tested carefully that it does
work correctly with the Apache basic auth backend in our test
environment.
In this commit we start to support redirects to urls supplied as a
'next' param for the following two backends:
* GoogleOAuth2 based backend.
* GitHubAuthBackend.
This commit adds a generic function called check_send_webhook_message
that does the following:
* If a stream is specified in the webhook URL, it sends a stream
message, otherwise sends a PM to the owner of the bot.
* In the case of a stream message, if a custom topic is specified
in the webhook URL, it uses that topic as the subject of the
stream message.
Also, note that we need not test this anywhere except for the
helloworld webhook. Since helloworld is our default example for
webhooks, it is here to stay and it made sense that tests for a
generic function such as check_send_webhook_message be tested
with an actual generic webhook!
Fixes#8607.
We now include whether the message was a private or group private
message; this is particularly important with the new setting to
disable including any message content in these emails (since in that
case, one doesn't know anything about the message types).
@brockwhittaker wrote the original prototype for having
pills in the recipient box when users compose PMs (either
1:1 or huddle). The prototype was test deloyed on our
main realm for several weeks.
This commit includes all the original CSS and HTML from
the prototype.
After some things changed with the codebase after the initial
test deployment, I made the following changes:
* In prior commits I refactored out a module called
`user_pill.js` that implemented some common functions
against a more streamlined version of `input_pill.js`,
and this commit largely integrates with that.
* I made changes in a prior commit to handle Zephyr
semantics (emails don't get validated) and tested
this commit with zephyr.
* I fixed a reload bug by extracting code out to
`compose_pm_pill.js` and re-ordering some
calls to `initialize`.
There are still two flaws related to un-pill-ified text in the
input:
* We could be more aggressive about trying to pill-ify
emails when you blur or tab away.
* We only look at the pills when you send the message,
instead of complaining about the un-pill-ified text.
(Some folks may consider that a feature, but it's
probably surprising to others.)
Add `translate_emoticons` to `prop_types` and `expected_keys`.
Furthermore, create a emoji-translating Markdown inline pattern.
Also use a JavaScript version of `translate_emoticons` and then use
this function during Markdown previews and as a preprocessor. This
is only needed for previews, because usually emoticon translation
happens on the backend after sending.
Add tests for emoticon translation, a settings UI, and a /help/ page
as well.
Tweaked by tabbott to fix various test failurse as well as how this
handles whitespace, requiring emoticons to not have adjacent
characters.
Fixes#1768.
Now, the fixtures.json file:
* Has all keys sorted alphabetically.
* Has a space after every `:`.
The file was generated using json.dumps with the appropriate
formatting parameters.
Note that this is one of the few fixtures that isn't tested against
a running server. But it still makes sense to move it to fixtures.json so
that it is rendered with indenting and a space after every `:` by
the api_code_example extension.
This works simimlar to the "n" key for next topics.
This commit does a few things:
* It wires up the hotkey to an existing function
that could change narrows.
* It adds documentation.
* It adds logic to make sure the compose box does
not open.
@showell helped a bit with the wording of comments here.
Fixes#4874
This commit:
* Removes the unnecessary screenshot.
* Reorders the instructions and combines them in to 4 steps.
* Improves the contents of the webhook-url-with-bot-email-indented.md
macro and makes it more consistent with create-bot-construct-url.md.
* Sets the recommended stream name to "commits", since that's what
the webhook function for Beanstalk expects in
zerver/webhooks/beanstalk/view.py. This allows us to use the
create-stream.md macro.
Previously, we used to raise an exception if the direct dev login code
path was attempted when:
* we were running under production environment.
* dev. login was not enabled.
Now we redirect to an error page and give an explanatory message to the
user.
Fixes#8249.
This commit adds a test for the sample fixture for when an invalid
stream name is passed to a query that expects a valid stream name
as an argument. This is the case with almost all of our queries
documented under the sidebar heading "Streams".
EDIT: Actually, I was wrong. This payload is highly specific to
get-stream-id, so it shouldn't be a part of common-error-payloads
at all.
In templates/zerver/api/delete-queue.md, we have a sample fixture
for when the queue_id passed to client.deregister_queue is not
valid or the event queue in question has already been deleted.
This commit tests that fixture.
Note that this error payload is specific to client.deregister_queue.
In templates/zerver/api/create-user.md, we have a sample fixture
for when a client attempts to create a user with the same email
as an existing user. This commit adds a test for that fixture.
Note that this error payload is specific to client.create_user
and this error payload isn't generated anywhere else.
In templates/zerver/api/add-subscriptions, we have a sample fixture
for when the user being subscribed is already subscribed to a
stream. This commit tests that fixture against a running server.
This commit adds tests for the fixture for when a user is not
authorized (perhaps because the query requires the use of admin
privileges) for a particular query.
In templates/zerver/api/update-message.md, we have a sample fixture
for when a zulip.Client does not have the permission to update/edit
a particular message. This commit adds a test for that fixture.
Also, tools/test-api now also uses a non-admin client for this test,
which might come in handy in the future.
This commit adds tests for the sample fixture for when a required
request argument is missing. Also, it moves the sample fixture
to common-error-payloads.md, since this is an error payload that
is common to most requests (except the ones that don't take any
arguments).
In templates/zerver/api/private-message.md, we have a sample fixture
for when the email address of the PM's recipient is invalid. This
commit makes sure that fixture is tested against a running server.
In templates/zerver/api/stream-message.md, we have a sample fixture
for when the target stream does not exist. This commit adds a test
for that sample fixture.
We make request to check availibity of subdomain which also checks the
subdomain for illegal characters. Duplicating the backend logic in
frontend in this case is thus no longer necessary.
We have a good "Help Center" section in the footer, where a user
may already expect to look for help/support related requests, so
we can replace the navbar spot there with the "Why Zulip" page link.
This commit modifies the Markdown extension in bugdown/api_code_examples.py
to support rendering code examples in multiple languages by specifying
the language like so:
{generate_code_example(python)|doc.md|example}
This makes us one step closer towards adding support for testable
JavaScript code examples.
In this commit we add support for some tags which are also called
void-elements according to
http://w3c.github.io/html/syntax.html#void-elements to be parsed by
our template parser and get tagged as singleton_html_tags.
Fixes: #8387.
This is the first step in cleaning up the bot edit code.
Since the bot edit form appears dynamically, we remove
it from the static HTML scaffold, of which settings_sidebar
is a part of.
We now have a separate page for common error payloads, for example,
the payload for when the client's API key is invalid. All error
payloads that are presented on this page will be tested similarly
to our other non-error sample fixtures.
To generate a code exammple,
{generate_code_example|<api_doc_md>|example} sounds better and
more intuitive than,
{generate_code_example|<api_doc_md>|method}
Users having only account in one realm will not be distracted by realm
name in subject lines of every email. Users who have multiple
accounts in realms can turn this setting on and receive a
corresponding realm name in email's subject.
Tweaked by tabbott to rebase and address a few small issues.
Fixes#5489.
Also refactor the "panels"/banner code to be a bit clearer about how
it's supposed to generically work, using [data-process] as a uniquely
identifying marker.
Fixes: #8166.
[greg: rebased and squashed a series of fixup commits.]
Fixes improper katex rendering in markdown help template. The
rendering was originally correct, but was broken when we upgraded to a
new version of KaTeX with a different HTML/CSS interface.
"Sign up" -- pretty important for people to be able to read that!
There's also the "or" that gets rendered as a big "OR" in a divider --
but that styling is too brittle, so that if "or" becomes e.g. "oder",
the lines stay the length they should be for "or" and the lot of them
wrap. Yuck. Better to leave it as "or" until that's fixed.
If there was a realm on the base URL, its logo and name were being
displayed when registering a new realm (i.e. the page where realm details
are entered, after confirming email). This commit prevents the realm
details from being displayed.
Fixes#8186
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested
in zerver/lib/api_test_helpers.
Eeshan Garg
Steve Howell
Shubham Dhama
Rhea Parekh
Yashashvi Dave
novokrest
Tim Abbott
Robert Hönig
Shubham Padia
Yago González
Vishnu Ks
Rishi Gupta
Lyla Fischer
vaibhav
Max Nussenbaum
Nikhil Kumar Mishra
Joshua Pan
Aditya Bansal
Aastha Gupta
Armaan Ahluwalia
Priyank Patel
Umair Khan
gooca
Rohitt Vashishtha
Greg Price
Cynthia Lin
Akash Nimare
Preston Hansen
Balaji2198
Anurag Sharma
sinwar
Anupam-dagar
Shivam Gera
amanagr
Marco Burstein
Utkarsh Patil
Weronika Grzybowska
Viraat Chandra
Abhishek Sharma
Abhigyan Khaund
Vaida Plankyte
Brock Whittaker
Aman Jain
Priscilla
Roman Godov
VishalCR7
rht
Tarun Kumar
Aditya Shridhar Hegde