We were using `code` to pass around messages.
The `code` field is designed to be a code, not
a human-readable message.
It's possible that we don't actually need two
flavors of messages for these type of validations,
but I didn't want to change that yet.
We **definitely** don't need to put two types of
message in the exception, so I fix that. Instead,
I just have the caller ask what level of detail
it needs.
I added a non-verbose message for the case of
system bots.
I removed the non-translated version of the message
for deactivated accounts, which didn't have test
coverage and is slightly more prone to leaking
email info that we don't want to leak.
In the prep commits leading up to this, we split
out two new helpers:
validate_email_is_valid
get_errors_for_new_emails
Now when we validate invites we use two separate
loops to filter our emails.
Note that the two extracted functions map to two
of the data structures that used to be handled
in a single loop, and now we break them out:
errors = validate_email_is_valid
skipped = get_errors_for_new_emails
The first loop checks that emails are even valid
to begin with.
The second loop finds out whether emails are already
in use.
The second loop takes advantage of this helper:
get_errors_for_new_emails
The second helper can query all potential new emails
with a single round trip to the database.
This reduces our query count.
We are trying to kill off `validate_email`, so
we no longer call it from these tests.
These tests are already kind of low-level in
nature, so testing the more specific helpers
here should be fine.
Note that we also make the third parameter
to `validate_email` non-optional in this commit,
to preserve 100% coverage. This is really just
refactoring noise--we will soon eliminate the
entire function, but I didn't want to do everything
in a huge commit.
This has two goals:
- sets up a future commit to bulk-validate
emails
- the extracted function is more simple,
since it just has errors, and no codes
or deactivated flags
This commit leaves us in a somewhat funny
intermediate state where we have
`action.validate_email` being a glorified
two-line function with strange parameters,
but subsequent commits will clean this up:
- we will eliminate validate_email
- we will move most of the guts of its
other callee to lib/email_validation.py
To be clear, the code is correct here, just
kinda in an ugly, temporarily-disorganized
intermediate state.
We now use the `get_realm_email_validator()`
helper to build an email validator outside
the loop of emails in our invite list.
This allows us to perform RealmDomain queries
only once per request, instead of once per
email.
Without the fix here, you will get an exception
similar to below if you try to invite one of the
cross realm bots. (The actual exception is
a bit different due to some rebasing on my branch.)
File "/home/zulipdev/zulip/zerver/lib/request.py", line 368, in _wrapped_view_func
return view_func(request, *args, **kwargs)
File "/home/zulipdev/zulip/zerver/views/invite.py", line 49, in invite_users_backend
do_invite_users(user_profile, invitee_emails, streams, invite_as)
File "/home/zulipdev/zulip/zerver/lib/actions.py", line 5153, in do_invite_users
email_error, email_skipped, deactivated = validate_email(user_profile, email)
File "/home/zulipdev/zulip/zerver/lib/actions.py", line 5069, in validate_email
return None, (error.code), (error.params['deactivated'])
TypeError: 'NoneType' object is not subscriptable
Obviously, you shouldn't try to invite a cross
realm bot to your realm, but we want a reasonable
error message.
RESOLUTION:
Populate the `code` parameter for `ValidationError`.
BACKGROUND:
Most callers to `validate_email_for_realm` simply catch
the `ValidationError` and then report a more generic error.
That's also what `do_invite_users` does, but it has the
somewhat convoluted codepath through `validate_email`
that triggers this code:
try:
validate_email_for_realm(user_profile.realm, email)
except ValidationError as error:
return None, (error.code), (error.params['deactivated'])
The way that we're using the `code` parameter for
`ValidationError` feels hacky to me. The intention
behind `code` is to provide a descriptive error to
calling code, and it's not intended for humans, and
it feels strange that we actually translate this in
other places. Here are the Django docs:
https://docs.djangoproject.com/en/3.0/ref/forms/validation/
And then here's an example of us actually translating
a code (not part of this commit, just providing context):
raise ValidationError(_('%s already has an account') %
(email,), code = _("Already has an account."),
params={'deactivated': False})
Those codes eventually get put into InvitationError, which
inherits from JsonableError, and we do actually display
these errors in the webapp:
if skipped and len(skipped) == len(invitee_emails):
# All e-mails were skipped, so we didn't actually invite anyone.
raise InvitationError(_("We weren't able to invite anyone."),
skipped, sent_invitations=False)
I will try to untangle this somewhat in upcoming commits.
We allow folks to invite emails that are
associated with a mirror_dummy account.
We had a similar test already for registration,
but not invites.
This logic typically affects MIT realms in the
real world, but the logic should apply to any
realm, so I use accounts from the zulip realm
for convenient testing. (For example, we might
run an IRC mirror for a non-MIT account.)
I use a range here because there's some leak
from another test that causes the count to
vary. Once we get this a bit more under control,
we should be able to analyze the leak better.
The substantive improvement here is to use
a strange casing for Hamlet's email, which
will prevent future casing bugs.
I also log in as Cordelia to prevent confusion
that the test has something to do with
inviting yourself. It's more typical for
somebody to invite another person to a realm
(not realizing they're already there).
I also made two readability tweaks.
Previously, the input:
====================
- One
- Two
Two continued
====================
Would produce the same output as:
====================
- One
- Two
```
Two continued
```
====================
This was because our CodeBlockProcessor had a higher priority than
the ListIndentProcessor. This issue was discussed here:
https://chat.zulip.org/#narrow/stream/9-issues/topic/continuation.20paragraphs.20in.20list.20items.
/delete_topic endpoint could be used to request the deletion of a topic,
that would cause do_delete_messages to be called with an empty set in
these cases:
1. Requesting deletion of an empty stream.
2. Requesting deletion of a topic in a private stream with history not
public to subscribers, if the requesting admin doesn't have access to
any of the messages in that topic.
We were only checking error handling before, not
the happy path. The structure of the code
made it so that we effectively tested most of the
logic for this use case (since all the other flags
are sort of just filters on top of this), but
obviously we want explicit coverage here. Also,
we weren't testing the is-admin-but-not-api-super-user
error checking until this commit.
For historical reasons we were creating Recipient
objects at some point in the typing-notifications
codepath. Now we just work with UserProfiles.
This removes some queries, as indicated by
the change to `len(queries)` in a couple of the
tests.
The one subtle thing that changes here is huddles.
If user 10 sends a typing notification that they
are talking to users 20 and 30, there might not
actually be a huddle for users 10/20/30, but
we were actually creating huddles on the fly!
There is no need to create huddles just for
typing notifications, since we don't even
share huddle ids with our clients. The clients
just infer the huddles.
Some of the code that gets killed off here as
somewhat "collateral damage" is some
defensive code related to formerly supporting streams
in typing indicators. The support for streams
was killed off almost as soon as we released
the feature, and the codepath is pretty clearly
user-centric at this point.
The only clients that should use the typing
indicators endpoint are our internal clients,
and they should send a JSON-formatted list
of user_ids.
Unfortunately, we still have some older versions
of mobile that still send emails.
In this commit we fix non-user-facing things
like docs and tests to promote the user_ids
interface that has existed since about version
2.0 of the server.
One annoyance is that we documented the
typing endpoint with emails, instead of the
more modern user_ids, which may have delayed
mobile converting to user_ids (and which
certainly caused confusion). It's trivial
to update the docs, but we need to short
circuit one assertion in the openapi tests.
We also clean up the test structure for the
typing tests:
TypingHappyPathTest.test_start_to_another_user
TypingHappyPathTest.test_start_to_multiple_recipients
TypingHappyPathTest.test_start_to_self
TypingHappyPathTest.test_start_to_single_recipient
TypingHappyPathTest.test_stop_to_another_user
TypingHappyPathTest.test_stop_to_self
TypingValidateOperatorTest.test_invalid_parameter
TypingValidateOperatorTest.test_missing_parameter
TypingValidateUsersTest.test_argument_to_is_not_valid_json
TypingValidateUsersTest.test_bogus_user_id
TypingValidateUsersTest.test_empty_array
TypingValidateUsersTest.test_missing_recipient
TypingValidationHelpersTest.test_recipient_for_user_ids
TypingValidationHelpersTest.test_recipient_for_user_ids_non_existent_id
TypingLegacyMobileSupportTest.test_legacy_email_interface
Users who are using ZulipDesktop or haven't managed to auto-update to
ZulipElectron should be strongly encouraged to upgrade.
We'll likely want to move to something even stricter that blocks
loading the app at all, but this is a good start.
This field wasn't accessed by any clients and was a less robust
version of the user_id field. Any client hoping to be interested in
who did message edits should be able to handle working with user IDs
rather than email addresses.
We should not need so many queries here,
although a couple of the queries are just
standard things that apply to all requests.
I will reduce the number of queries in a
later commit.
This is mostly refactoring, but we also prevent a new
type of value error (list of non-int-or-string). The
new test code helps enforce that.
Cleanup includes:
- Use early-exit for email case.
- Rename helpers to get_validate_*.
- Avoid clumsy rebuilding of lists in helpers.
- Avoid the confusing `recipient` name (which
can be confused with the model by the same
name).
- Just delegate duplicate-id/email-removal to
the helpers.
The cleaner structure allows us to elminate a couple
mypy workarounds.
Credits to @xpac1985 for reporting, debugging and proposing fix to the
issue. The proposed fix was modified slightly by @hackerkid to set the
correct value for max_invites and upload_quota_gb. Tests added by
@hackerkid.
Fixes#13974
This gives them cache-compatible URLs, and also avoids some extra
copies of the sprite sheet images.
Comments on the Octopus emoji added by tabbott.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This fixes a confusing aspect of how our automated tests worked
previously, where we'd almost all HTTP requests in the unlikely
configuration with no User-Agent string specified.
We need to adjust query counts in a few tests that now are a bit
cheaper because they now can take advantage of a Client object created
in server_initialization.py in `process_client`.
There was some duplicated code to test config error pages for
different auths which could be handled with less duplicated code
by adding those functions to `SocialAuthBase`.
Also moving the other tests makes it easier to access tests related
to a backend auth when they are in the same file.
Original idea was that KeyError was only going to happen there in case
of user passing bad input params to the endpoint, so logging a generic
message seemed sufficient. But this can also happen in case of
misconfiguration, so it's worth logging more info as it may help in
debugging the configuration.
Create a new page for desktop auth flow, in which
users can select one from going to the app or
continue the flow in the browser.
Co-authored-by: Mateusz Mandera <mateusz.mandera@protonmail.com>
To avoid some hidden bugs in tests caused by every ldap user having the
same password, we give each user a different password, generated based
on their uids (to avoid some ugly hard-coding in a bunch of places).
This avoids using `.save()` directly for editing stream properties,
and also uses the API in _send_and_verify_message to avoid confusing
logic around which user is doing what request.
Fixes part of #13823
This adds the OpenAPI format data for /users/{user_id} endpoint
and also removes 'users/{user_id}' from 'pending_endpoints' in
zerver/tests/test_openapi.py .
A sloppy implementation of the main has_request_variables wrapper
function meant that it did two very inefficient things:
* To combine together the GET and POST parameters, it would make a
copy of the request.GET QueryDict object, which combined with the
fact that these objects are slow to access, consumed about 90us per
argument.
* Doing this in a loop (one time per argument), rather than once,
which resulted in us doing this 11 times for a `GET /events` query.
Fixing this to just make a dictionary and combine things with some
small loops saved about 1 millisecond from the total runtime of GET
/events (for comparison, the total actual work of that view function
is about 700ms).
We need to fix at least one test that used a bad mock HttpRequest
object that didn't have a .GET property.
Django 2.2.x is the next LTS release after Django 1.11.x; I expect
we'll be on it for a while, as Django 3.x won't have an LTS release
series out for a while.
Because of upstream API changes in Django, this commit includes
several changes beyond requirements and:
* urls: django.urls.resolvers.RegexURLPattern has been replaced by
django.urls.resolvers.URLPattern; affects OpenAPI code and related
features which re-parse Django's internals.
https://code.djangoproject.com/ticket/28593
* test_runner: Change number to suffix. Django changed the name in this
ticket: https://code.djangoproject.com/ticket/28578
* Delete now-unnecessary SameSite cookie code (it's now the default).
* forms: urlsafe_base64_encode returns string in Django 2.2.
https://docs.djangoproject.com/en/2.2/ref/utils/#django.utils.http.urlsafe_base64_encode
* upload: Django's File.size property replaces _get_size().
https://docs.djangoproject.com/en/2.2/_modules/django/core/files/base/
* process_queue: Migrate to new autoreload API.
* test_messages: Add an extra query caused by .refresh_from_db() losing
the .select_related() on the Realm object.
* session: Sync SessionHostDomainMiddleware with Django 2.2.
There's a lot more we can do to take advantage of the new release;
this is tracked in #11341.
Many changes by Tim Abbott, Umair Waheed, and Mateusz Mandera squashed
are squashed into this commit.
Fixes#10835.
This makes it possible to create a Zulip account from the mobile or
desktop apps and have the end result be that the user is logged in on
their mobile device.
We may need small changes in the desktop and/or mobile apps to support
this.
Closes#10859.
webpack optimizes JSON modules using JSON.parse("{…}"), which is
faster than the normal JavaScript parser.
Update the backend to use emoji_codes.json too instead of the three
separate JSON files.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This code was very useful when first implemented to help catch errors
where our backend templates didn't render, but has been superceded by
the success of our URL coverage testing (which ensures every URL
supported by Zulip's urls.py is accessed by our tests, with a few
exceptions) and other tests covering all of the emails Zulip sends.
It has a significant maintenance cost because it's a bit hacky and
involves generating fake context, so it makes sense to remove these.
Any future coverage issues with templates should be addressed with a
direct test that just accessing the relevant URL or sends the relevant
email.
In python 3.5-3.6, generic types had an __origin__ attribute which
indicated which generic they originated from; the code was reflecting on
that value to check types against the openapi spec. In python3.7, this
changed, and there's no longer an immediately simple way to get this
information in all cases. __origin__ appears to be the implementing
class now, returning `list` or `collections.abc.Iterator` rather than
`typing.List` and `typing.Iterator`. This adds a sloppy-but-effective
mechanism for inferring if a type maps to the List/Dict/Iterator/Mapping
types and gets the test suite passing again.
We now validate streams with a separate
function from PM recipients.
It's confusing enough all the ways you can
encode a stream or encode the PM recipients,
but trying to do it all in one function was
hard to reason about and led to at least one
bug.
In particular, there was a bug where streams
with commas in them would get split. Now
we just don't ever split on commas inside
of `extract_stream_indicator`.
Fixes#13836
After removing internal_send_message() in a recent
commit, we now have only two callers for
extract_recipients, and they are both related
to our REQ mechanism that always passes strings
to converters. (If there are default values,
REQ does not call the converters.)
We therefore make two changes:
- use the more strict annotation of "str"
for the `s` parameter
- don't bother with the isinstance check
Note that while the test mocks the actual message
send, we now have a `get_stream` call in the queue
worker, so we have to set up a real stream for
testing (or we could have mocked that as well, but
it didn't seem necessary). The setup queries add
to the amount of queries reported by the test,
plus the `get_stream` call. I just made the
query count a digits regex, which is a little bit
lame, but I don't think it's worth risking test
flakes for this.
This index is intended to optimize the performance of the very
frequently run query of "what is the presence status of all users in a
realm?".
Main changes:
- add realm_id to UserPresence
- add index for realm_id
- backfill realm_id for old rows
- change all writes to UserPresence to include
realm_id
The index is of this form:
"zerver_userpresence_realm_id_5c4ef5a9" btree (realm_id)
We will create an index on (realm_id, timestamp) in a
future commit, but I think it's a bit faster if you do
the backfill before the index.
There's also a minor tweak to the populate_db script.
Instead of having `notify_new_user` delegate
all the heavy lifting to `send_signup_message`,
we just rename `send_signup_message` to be
`notify_new_user` and remove the one-line
wrapper.
We remove a lot of obsolete complexity:
- `internal` was no longer ever set to True
by real code, so we kill it off as well
as well as killing off the internal_blurb code
and the now-obsolete test
- the `sender` parameter was actually an
email, not a UserProfile, but I think
that got past mypy due to the caller
passing in something from settings.py
- we were only passing in NOTIFICATION_BOT
for the sender, so we just hard code
that now
- we eliminate the verbose
`admin_realm_signup_notifications_stream`
parameter and just hard code it to
"signups"
- we weren't using the optional realm
parameter
There's also a long ugly comment in
`get_recipient_info` related to this code
that I amended for now.
We should try to take action in a subsequent
commit.
I am trying to optimize a query in this endpoint.
I don't think I'll actually reduce the number of
queries, but I wanted to capture the query and
this was the easiest way to do it, so might as
well check in the code! :)
This adds a new API endpoint for querying basic data on a single other
user in the organization, reusing the existing infrastructure (and
view function!) for getting data on all users in an organization.
Fixes#12277.
This commit includes a new `stream_post_policy` setting,
by replacing the `is_announcement_only` field from the Stream model,
which is done by mirroring the structure of the existing
`create_stream_policy`.
It includes the necessary schema and database migrations to migrate
the is_announcement_only boolean field to stream_post_policy,
a smallPositiveInteger field similar to many other settings.
This change is done to allow organization administrators to restrict
new members from creating and posting to a stream. However, this does
not affect admins who are new members.
With many tweaks by tabbott to documentation under /help, etc.
Fixes#13616.
This flag affects page_params and the
payload you get back from POSTs to this
url:
users/me/presence
The flag does not yet affect the
presence events that get sent to a
client.
This applies rate limiting (through a decorator) of authenticate()
functions in the Email and LDAP backends - because those are the ones
where we check user's password.
The limiting is based on the username that the authentication is
attempted for - more than X attempts in Y minutes to a username is not
permitted.
If the limit is exceeded, RateLimited exception will be raised - this
can be either handled in a custom way by the code that calls
authenticate(), or it will be handled by RateLimitMiddleware and return
a json_error as the response.
Tests require adjusting, because the class-based view has an additional
redirect - through /uid/set-password/ and the token is read from the
session. See Django code of PasswordResetConfirmView.
This modifies get_cross_realm_dicts in zerver.lib.users to call
format_user_row. This is done to remove current and prevent future
inconsistencies between in the dictionary formats for get_raw_user_data
and get_cross_realm_dicts.
Implementation substantially rewritten by tabbott.
Fixes#13638.
In addition to making our schema check stricter, it also makes it
possible for us to extend check_events_dict to do additional
validation that's only expected for the full event object.
Now that we have the type situation of having anchor support passing a
string, this is a much more natural way to implement
use_first_unread_anchor.
We still support the old interface to avoid breaking compatibility
with legacy versions of the mobile apps.
A wart that has long been present inin Zulip's get_messages API is how
to request "the latest messages" in the API. Previously, the
recommendation was basically to pass anchor=10000000000000000 (for an
appropriately huge number). An accident of the server's implementation
meant that specific number of 0s was actually important to avoid a
buggy (or at least wasteful) value of found_newest=False if the query
had specified num_after=0 (since we didn't check).
This was the cause of the mobile issue
https://github.com/zulip/zulip-mobile/issues/3654.
The solution is to allow passing a special value of anchor='newest',
basically a special string-type value that the server can interpret as
meaning the user precisely just wants the most recent messages. We
also add an analogous anchor='oldest' or similar to avoid folks
needing to write a somewhat ugly anchor=0 for fetching the very first
messages.
We may want to also replace the use_first_unread_anchor argument to be
a "first_unread" value for the anchor parameter.
While it's not always ideal to make a value have a variable type like
this, in this case it seems like a really clean way to express the
idea of what the user is asking for in the API.
This fixes a bug where that clients using the legacy approach of a
"very large anchor" value with the intent to only get the most recent
messages would only get found_newest=True if they used the specific
value LARGER_THAN_MAX_MESSAGE_ID. Now any value at least that large
will work.
In upcoming commits, we plan to replace this with passing the string
"last", but it seems worth removing the buggy "special value" behavior
while we're touching this code.
This is required for the upcoming type behavior of the "anchor"
parameter.
This change is the minimal work required to have our OpenAPI code not
fail when checking a union-type value of this form. We'll likely want
to, in the future, do something nicer, but it'd require more extensive
infrastructure for parsing of OpenAPI data that it's worth with our
current approach (we may want to switch to using a library).
Previously, we didn't track opening and closing fences separately,
with led to bugs like not parsing a list that was immediately after
a quoted fence; we treated each ``` as a new fence.
This commit rewrites the function to maintain a stack of currently
open fences. If any of the parent fences is a code fence, we do not
insert a new line before a list.
We also add some test cases specifically to test this behavior with
complexly nested lists.
Fixes#13745.
Adding invited users to the notifications stream unconditionally isn't
a correct behaviour for guest users, where the previous behavior of
including the notifications stream no longer makes sense. Therefore,
while inviting a new user, the notifications stream is listed along
with other streams with a message "recieves notifications for new
streams" in order to distinguish it from other streams.
Fixes#13645.
The desktop otp flow (to be added in next commits) will want to generate
one-time tokens for the app that will allow it to obtain an
authenticated session. log_into_subdomain will be the endpoint to pass
the one-time token to. Currently it uses signed data as its input
"tokens", which is not compatible with the otp flow, which requires
simpler (and fixed-length) token. Thus the correct scheme to use is to
store the authenticated data in redis and return a token tied to the
data, which should be passed to the log_into_subdomain endpoint.
In this commit, we replace the "pass signed data around" scheme with the
redis scheme, because there's no point having both.
This extracts a function for computing show_invites and
show_add_streams, for better readability and testability.
This commit was substantially cleaned up by tabbott.
This legacy cross-realm bot hasn't been used in several years, as far
as I know. If we wanted to re-introduce it, I'd want to implement it
as an embedded bot using those common APIs, rather than the totally
custom hacky code used for it that involves unnecessary queue workers
and similar details.
Fixes#13533.
authenticate_remote_user already takes care of calling the authenticate
with the dummy backend. Also, return_data is not used and catching
DoesNotExist exception is not needed, as the dummy backend just returns
None if user isn't found.
This updates our error handling of invalid Slack API tokens (and other
networking error handling) to mostly make sense:
* A token that doesn't start with `xoxp-` gives an extended error early.
* An AssertionError for the codebase is correctly declared as such.
* We check for token shape errors before querying the Slack API.
We could still do useful work to raise custom exception classes here.
Thanks to @stavrospat for raising this issue.
responses is an module analogous to httpretty for mocking external
URLs, with a very similar interface (potentially cleaner in that it
makes use of context managers).
The most important (in the moment) problem with httpretty is that it
breaks the ability to use redis in parts of code where httpretty is
enabled. From more research, the module in general has tendency to
have various troublesome bugs with breaking URLs that it shouldn't be
affecting, caused by it working at the socket interface layer. While
those issues could be fixed, responses seems to be less buggy (based
on both third-party reports like ckan/ckan#4755 and our own experience
in removing workarounds for bugs in httpretty) and is more actively
maintained.
If an email is sent with the .prefer-html option, but it has no html
body, it's better to fall back to plaintext content instead of treating
it as a user error.
Closes#13484.
These options tell zulip whether to prefer the plaintext or html version
of the email message. prefer-text is the default behavior, so including
the option doesn't change anything as of now, but we're adding it to
prepare to potentially change the default behavior in the future.
Since the intent of our testing code was clearly to clear this cache
for every test, there's no reason for it to be a module-level global.
This allows us to remove an unnecessary import from test_runner.py,
which in combination with DEFAULT_REALM's definition was causing us to
run models code before running migrations inside test-backend.
(That bug, in turn, caused test-backend's check for whether migrations
needs to be run to happen sadly after trying to access a Realm,
trigger a test-backend crash if the Realm model had changed since the
last provision).
Zulip has had a small use of WebSockets (specifically, for the code
path of sending messages, via the webapp only) since ~2013. We
originally added this use of WebSockets in the hope that the latency
benefits of doing so would allow us to avoid implementing a markdown
local echo; they were not. Further, HTTP/2 may have eliminated the
latency difference we hoped to exploit by using WebSockets in any
case.
While we’d originally imagined using WebSockets for other endpoints,
there was never a good justification for moving more components to the
WebSockets system.
This WebSockets code path had a lot of downsides/complexity,
including:
* The messy hack involving constructing an emulated request object to
hook into doing Django requests.
* The `message_senders` queue processor system, which increases RAM
needs and must be provisioned independently from the rest of the
server).
* A duplicate check_send_receive_time Nagios test specific to
WebSockets.
* The requirement for users to have their firewalls/NATs allow
WebSocket connections, and a setting to disable them for networks
where WebSockets don’t work.
* Dependencies on the SockJS family of libraries, which has at times
been poorly maintained, and periodically throws random JavaScript
exceptions in our production environments without a deep enough
traceback to effectively investigate.
* A total of about 1600 lines of our code related to the feature.
* Increased load on the Tornado system, especially around a Zulip
server restart, and especially for large installations like
zulipchat.com, resulting in extra delay before messages can be sent
again.
As detailed in
https://github.com/zulip/zulip/pull/12862#issuecomment-536152397, it
appears that removing WebSockets moderately increases the time it
takes for the `send_message` API query to return from the server, but
does not significantly change the time between when a message is sent
and when it is received by clients. We don’t understand the reason
for that change (suggesting the possibility of a measurement error),
and even if it is a real change, we consider that potential small
latency regression to be acceptable.
If we later want WebSockets, we’ll likely want to just use Django
Channels.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Fixes#13416
We used to search only one level in depth through the MIME structure,
and thus would miss attachments that were nested deeper (which can
happen with some email clients). We can take advantage of message.walk()
to iterate through each MIME part.
Previously, if you tried to invite a user whose account had been
deactivated, we didn't provide a clear path forward for reactivating
the users, which was confusing.
We fix this by plumbing through to the frontend the information that
there is an existing user account with that email address in this
organization, but that it's deactivated. For administrators, we
provide a link for how to reactivate the user.
Fixes#8144.
This experimental setting disables sending private messages in Zulip
in a crude way (i.e. users get an error when they try to send one).
It makes no effort to adjust the UI to avoid advertising the idea of
sending private messages.
Fixes#6617.
We should take adventage of the recipient field being denormalized into
the Stream model. We don't need to make queries to figure out a stream's
recipient id, so we take advantage of that to eliminate some of
those redundant queries and simplify StreamRecipientMap.
Addresses point 1 of #13533.
MissedMessageEmailAddress objects get tied to the specific that was
missed by the user. A useful benefit of that is that email message sent
to that address will handle topic changes - if the message that was
missed gets its topic changed, the email response will get posted under
the new topic, while in the old model it would get posted under the
old topic, which could potentially be confusing.
Migrating redis data to this new model is a bit tricky, so the migration
code has comments explaining some of the compromises made there, and
test_migrations.py tests handling of the various possible cases that
could arise.
For cross realm bots, explicitly set bot_owner_id
to None. This makes it clear that the cross realm
bots have no owner, whereas before it could be
misdiagnosed as the server forgetting to set the
field.
These tests had a lot of very repetetive, identical mocking, in some
tests without even doing anything with the mocks. It's cleaner to put
the mock in the one relevant, common place for all the tests that need
it, and remove it from tests who had no use for the mocking.
Fixes#13504.
This commit is purely an improvement in error handling.
We used to not do any validation on keys before passing them to
memcached, which meant for invalid keys, memcached's own key
validation would throw an exception. Unfortunately, the resulting
error messages are super hard to read; the traceback structure doesn't
even show where the call into memcached happened.
In this commit we add validation to all the basic cache_* functions, and
appropriate handling in their callers.
We also add a lot of tests for the new behavior, which has the nice
effect of giving us decent coverage of all these core caching
functions which previously had been primarily tested manually.
QueueProcessingWorker and LoopQueueProcessingWorker are abstract classes
meant to be subclassed by a class that will define its own consume()
or consume_batch() method. ABCs are suited for that and we can tag
consume/consume_batch with the @abstractmethod wrapper which will
prevent subclasses that don't define these methods properly to be
impossible to even instantiate (as opposed to only crashing once
consume() is called). It's also nicely detected by mypy, which will
throw errors such as this on invalid use:
error: Only concrete class can be given where "Type[TestWorker]" is
expected
error: Cannot instantiate abstract class 'TestWorker' with abstract
attribute 'consume'
Due to it being detected by mypy, we can remove the test
test_worker_noconsume which just tested the old version of this -
raising an exception when the unimplemented consume() gets called. Now
it can be handled already on the linter level.
LoopQueueProcessingWorker can handle exceptions inside consume_batch in
a similar manner to how QueueProcessingWorker handles exceptions inside
consume.
Our ldap integration is quite sensitive to misconfigurations, so more
logging is better than less to help debug those issues.
Despite the following docstring on ZulipLDAPException:
"Since this inherits from _LDAPUser.AuthenticationFailed, these will
be caught and logged at debug level inside django-auth-ldap's
authenticate()"
We weren't actually logging anything, because debug level messages were
ignored due to our general logging settings. It is however desirable to
log these errors, as they can prove useful in debugging configuration
problems. The django_auth_ldap logger can get fairly spammy on debug
level, so we delegate ldap logging to a separate file
/var/log/zulip/ldap.log to avoid spamming server.log too much.
A block of LDAP integration code related to data synchronization did
not correctly handle EMAIL_ADDRESS_VISIBILITY_ADMINS, as it was
accessing .email, not .delivery_email, both for logging and doing the
mapping between email addresses and LDAP users.
Fixes#13539.
In 3892a8afd8, we restructured the
system for managing uploaded files to a much cleaner model where we
just do parsing inside bugdown.
That new model had potentially buggy handling of cases around both
relative URLs and URLS starting with `realm.host`.
We address this by further rewriting the handling of attachments to
avoid regular expressions entirely, instead relying on urllib for
parsing, and having bugdown output `path_id` values, so that there's
no need for any conversions between formats outside bugdowm.
The check_attachment_reference_change function for processing message
updates is significantly simplified in the process.
The new check on the hostname has the side effect of requiring us to
fix some previously weird/buggy test data.
Co-Author-By: Anders Kaseorg <anders@zulipchat.com>
Co-Author-By: Rohitt Vashishtha <aero31aero@gmail.com>
This closes an open redirect vulnerability, one case of which was
found by Graham Bleaney and Ibrahim Mohamed using Pysa.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Our open graph parser logic sloppily mixed data obtained by parsing
open graph properties with trusted data set by our oembed parser.
We fix this by consistenly using our explicit whitelist of generic
properties (image, title, and description) in both places where we
interact with open graph properties. The fixes are redundant with
each other, but doing both helps in making the intent of the code
clearer.
This issue fixed here was originally reported as an XSS vulnerability
in the upcoming Inline URL Previews feature found by Graham Bleaney
and Ibrahim Mohamed using Pysa. The recent Oembed changes close that
vulnerability, but this change is still worth doing to make the
implementation do what it looks like it does.
For new user onboarding, it's important for it to be easy to verify
that Zulip's mobile push notifications work without jumping through
hoops or potentially making mistakes. For that reason, it makes sense
to toggle the notification defaults for new users to the more
aggressive mode (ignoring whether the user is currently actively
online); they can set the more subtle mode if they find that the
notifications are annoying.
With the recipient field being denormalized into the UserProfile and
Streams models, all current uses of get_stream_recipients can be done
more efficiently, by simply checking the .recipient_id attribute on the
appropriate objects.
With the recipient field being denormalized into the UserProfile and
Streams models, all current uses of bulk_get_recipients can be done more
efficient, by simply checking the .recipient_id attribute on the
appropriate objects.
The flow in recipient_for_user_profiles previously worked by doing
validation on UserProfile objects (returning a list of IDs), and then
using that data to look up the appropriate Recipient objects.
For the case of sending a private message to another user, the new
UserProfile.recipient column lets us avoid the query to the Recipient
table if we move the step of reducing down to user IDs to only occur
in the Huddle code path.
Previously, if the user had interacted with the Zulip mobile app in
the last ~140 seconds, it's likely the mobile app had sent presence
data to the Zulip server, which in turns means that the Zulip server
might not send that user mobile push notifications (or email
notifications) about new messages for the next few minutes.
The email notifications behavior is potentially desirable, but the
push notifications behavior is definitely not -- a private message
reply to something you sent 2 minutes ago is definitely something you
want a push notification for.
This commit partially addresses that issue, by ignoring presence data
from the ZulipMobile client when determining whether the user is
currently engaging with a Zulip client (essentially, we're only
considering desktop activity as something that predicts the user is
likely to see a desktop notification or is otherwise "online").
This removes the last of the messy use of regular expressions outside
bugdown to make decisions on whether a message contains an attachment
or not. Centralizing questions about links to be decided entirely
within bugdown (rather than doing ad-hoc secondary parsing elsewhere)
makes the system cleaner and more robust.
This commit wraps up the work to remove basic regex based parsing
of messages to handle attachment claiming/unclaiming. We now use
the more dependable Bugdown processor to find potential links and
only operate upon those links instead of parsing the full message
content again.
Previously, we would naively set has_attachment just by searching
the whole messages for strings like `/user_uploads/...`. We now
prevent running do_claim_attachments for messages that obviously
do not have an attachment in them that we previously ran.
For example: attachments in codeblocks or
attachments that otherwise do not match our link syntax.
The new implementation runs that check on only the urls that
bugdown determines should be rendered. We also refactor some
Attachment tests in test_messages to test this change.
The new method is:
1. Create a list of potential_attachment_urls in Bugdown while rendering.
2. Loop over this list in do_claim_attachments for the actual claiming.
For saving:
3. If we claimed an attachment, set message.has_attachment to True.
For updating:
3. If claimed_attachment != message.has_attachment: update has_attachment.
We do not modify the logic for 'unclaiming' attachments when editing.
We register ZulipRemoteUserBackend as an external_authentication_method
to make it show up in the corresponding field in the /server_settings
endpoint.
This also allows rendering its login button together with
Google/Github/etc. leading to us being able to get rid of some of the
code that was handling it as a special case - the js code for plumbing
the "next" value and the special {% if only_sso %} block in login.html.
An additional consequence of the login.html change is that now the
backend will have it button rendered even if it isn't the only backend
enabled on the server.
This commit builds a more complete concept of an "external
authentication method". Our social backends become a special case of an
external authentication method - but these changes don't change the
actual behavior of social backends, they allow having other backends
(that come from python-social-auth and don't use the social backend
pipeline) share useful code that so far only serviced social backends.
Most importantly, this allows having other backends show up in the
external_authentication_methods field of the /server_settings endpoint,
as well as rendering buttons through the same mechanism as we already
did for social backends.
This moves the creation of dictonaries describing the backend for the
API and button rendering code away into a method, that each backend in
this category is responsible for defining.
To register a backend as an external_authentication_method, it should
subclass ExternalAuthMethod and define its dict_representation
classmethod, and finally use the external_auth_method class decorator to
get added to the EXTERNAL_AUTH_METHODS list.
This commit has a side-effect that we also now allow mixed lists,
but they have different syntax from the commonmark implementation
and our marked output. For example, without the closing li tags:
Input Bugdown Marked
-------------------------------------
<ul>
- Hello <li>Hello <ul><li>Hello</ul>
+ World <li>World <ul><li>World
+ Again <li>Again <li>Again</ul>
* And <li>And <ul><li>And
* Again <li>Again <li>Again</ul>
</ul>
The bugdown render is in line with what a user in #13447 requests.
Fixes#13477.
Adds required API and front-end changes to modify and read the
wildcard_mentions_notify field in the Subscription model.
It includes front-end code to add the setting to the user's "manage
streams" page. This setting will be greyed out when a stream is muted.
The PR also includes back-end code to add the setting the initial state of
a subscription.
New automated tests were added for the API, events system and front-end.
In manual testing, we checked that modifying the setting in the front end
persisted the change in the Subscription model. We noticed the notifications
were not behaving exactly as expected in manual testing; see
https://github.com/zulip/zulip/issues/13073#issuecomment-560263081 .
Tweaked by tabbott to fix real-time synchronization issues.
Fixes: #13429.
Previously, get_recent_private_messages could take 100ms-1s to run,
contributing a substantial portion of the total runtime of `/`.
We fix this by taking advantage of the recent denormalization of
personal_recipient into the UserProfile model, allowing us to avoid
the complex join with Recipient that was previously required.
The change that requires additional commentary is the change to the
main, big SQL query:
1. We eliminate UserMessage table from the query, because the condition
m.recipient_id=%(my_recipient_id)d
implies m is a personal message to the user being processed - so joining
with usermessage to check for user_profile_id and flags&2048 (which
checks the message is private) is redundant.
2. We only need to join the Message table with UserProfile
(on sender_id) and get the sender's personal_recipient_id from their
UserProfile row.
Fixes#13437.
This is adds foreign keys to the corresponding Recipient object in the
UserProfile on Stream tables, a denormalization intended to improve
performance as this is a common query.
In the migration for setting the field correctly for existing users,
we do a direct SQL query (because Django 1.11 doesn't provide any good
method for doing it properly in bulk using the ORM.).
A consequence of this change to the model is that a bit of code needs
to be added to the functions responsible for creating new users (to
set the field after the Recipient object gets created). Fortunately,
there's only a few code paths for doing that.
Also an adjustment is needed in the import system - this introduces a
circular relation between Recipient and UserProfile. The field cannot be
set until the Recipient objects have been created, but UserProfiles need
to be created before their corresponding Recipients. We deal with this
by first importing UserProfiles same way as before, but we leave the
personal_recipient field uninitialized. After creating the Recipient
objects, we call a function to set the field for all the imported users
in bulk.
A similar change is made for managing Stream objects.
Fixes#13452.
The migration from UserProfile.is_realm_admin/UserProfile.is_guest in
e10361a832 broke our LDAP-based support
for setting a user's role via LDAP properties, which relied on setting
those fields. Because the django-auth-ldap feature powering that only
supports booleans (and in any case, we don't want to expose constants
like `ROLE_REALM_ADMINISTRATOR` to the LDAP configuration interface),
it makes sense to provide setters for these legacy fields for
backwards-compatibility.
We lint against using these setters directly in Zulip's codebase
directly. The issue with using these is that when changing user's
.role we want to create appropriate RealmAuditLog entries and send
events. This isn't possible when using these setters - the log entries
and events should be created if the role change in the UserProfile is
actually save()-ed to the database - and on the level of the setter
function, it's not known whether the change will indeed be saved.
It would have to be somehow figured out on the level of post_save
signal handlers, but it doesn't seem like a good design to have such
complexity there, for the sake of setters that generally shouldn't be
used anyway - because we prefer the do_change_is_* functions.
The purpose of this change is narrowly to handle use cases like the
setattr on these boolean properties.
We used to specify the securityScheme for each REST operation seperately.
This is unecessary as the securityScheme can be specified in root level
and would be automatically applied to all operations. This also prevents
us accidentally not specifying the securityScheme for some operations and
was the case for /users/me/subscriptions PATCH endpoint. The root level
securityScheme can be also overriden in the operational level when
necessary.
swagger.io/docs/specification/authentication/#security
We use the plumbing introduced in a previous commit, to now raise
PushNotificationBouncerRetryLaterError in send_to_push_bouncer in case
of issues with talking to the bouncer server. That's a better way of
dealing with the errors than the previous approach of returning a
"failed" boolean, which generally wasn't checked in the code anyway and
did nothing.
The PushNotificationBouncerRetryLaterError exception will be nicely
handled by queue processors to retry sending again, and due to being a
JsonableError, it will also communicate the error to API users.
We add PushNotificationBouncerRetryLaterError as an exception to signal
an error occurred when trying to communicate with the bouncer and it
should be retried. We use JsonableError as the base class, because this
signal will need to work in two roles:
1. When the push notification was being issued by the queue worker
PushNotificationsWorker, it will signal to the worker to requeue the
event and try again later.
2. The exception will also possibly be raised (this will be added in the
next commit) on codepaths coming from a request to an API endpoint (for
example to add a token, to users/me/apns_device_token). In that case,
it'll be needed to provide a good error to the API user - and basing
this exception on JsonableError will allow that.
If a message begins with /me, we do not have any cases where the
rendered content would not begin with `<p>/me`. Thus, we can safely
remove the redundant checks both on the backend and frontend.
It appears we forgot to make identical changes to the backend
in #11089 while adding support for multiline /me messages,
resulting in any messages that didn't end in a paragraph getting
rendered as a regular message instead.
Fixes#13454.
In configurations with LDAP_APPEND_DOMAIN, we don't want people creating
non-ldap accounts with emails matching the ldap domain.
So in the registration flow, if the email isn't found in LDAP, but
matches LDAP_APPEND_DOMAIN, we stop, rather than proceeding with account
creation. In case of emails not matching LDAP_APPEND_DOMAIN, we will
still continue to make a normal, non-ldap account.
The problem was that, for example, given a configuration of social
backend + LDAPPopulator, if a user that's not in ldap was being
registered, the Full Name field in the registration form would be
empty instead of getting prefilled with the name provided by the
social backend.
This fixes it - first we try to get the name from ldap. If that
succeeds, a form is created pre-filled with that name. Otherwise, we
proceed to attempt to pre-fill with other means.
This also has a nice side effect of reorganizing most of the logic to
be more parallel between LDAP and other sources of name data.
This is a performance optimization, since we can avoid doing work
related to wildcard mentions in the common case that the message can't
have any. We also add a unit test for adding wildcard mentions in a
message edit.
We also switch the underlying exctact_mention_text method to use
a regular for loop, as well as make the related methods return
tuples of (names, is_wildcard). This abstraction is hidden from the
MentionData callers behind mention_data.message_has_wildcards().
Concerns #13430.
Previously, the LDAP code for syncing user data was not
multiple-realm-aware, resulting in errors trying to sync data for an
LDAP user present in multiple realms.
Tweaked by tabbott to add some extended comments.
Fixes#11520.
For a long time, we've been only doing the zxcvbn password strength
checks on the browser, which is helpful, but means users could through
hackery (or a bug in the frontend validation code) manage to set a
too-weak password. We fix this by running our password strength
validation on the backend as well, using python-zxcvbn.
In theory, a bug in python-zxcvbn could result in it producing a
different opinion than the frontend version; if so, it'd be a pretty
bad bug in the library, and hopefully we'd hear about it from users,
report upstream, and get it fixed that way. Alternatively, we can
switch to shelling out to node like we do for KaTeX.
Fixes#6880.
A bug in Zulip's new user signup process meant that users who
registered their account using social authentication (e.g. GitHub or
Google SSO) in an organization that also allows password
authentication could have their personal API key stolen by an
unprivileged attacker, allowing nearly full access to the user's
account.
Zulip versions between 1.7.0 and 2.0.6 were affected.
This commit fixes the original bug and also contains a database
migration to fix any users with corrupt `password` fields in the
database as a result of the bug.
Out of an abundance of caution (and to protect the users of any
installations that delay applying this commit), the migration also
resets the API keys of any users where Zulip's logs cannot prove the
user's API key was not previously stolen via this bug. Resetting
those API keys will be inconvenient for users:
* Users of the Zulip mobile and terminal apps whose API keys are reset
will be logged out and need to login again.
* Users using their personal API keys for any other reason will need
to re-fetch their personal API key.
We discovered this bug internally and don't believe it was disclosed
prior to our publishing it through this commit. Because the algorithm
for determining which users might have been affected is very
conservative, many users who were never at risk will have their API
keys reset by this migration.
To avoid this on self-hosted installations that have always used
e.g. LDAP authentication, we skip resetting API keys on installations
that don't have password authentication enabled. System
administrators on installations that used to have email authentication
enabled, but no longer do, should temporarily enable EmailAuthBackend
before applying this migration.
The migration also records which users had their passwords or API keys
reset in the usual RealmAuditLog table.
This change makes it possible for users to control the notification
settings for wildcard mentions as a separate control from PMs and
direct @-mentions.
This includes adding a new endpoint to the push notification bouncer
interface, and code to call it appropriately after resetting a user's
personal API key.
When we add support for a user having multiple API keys, we may need
to add an additional key here to support removing keys associated with
just one client.
Since years ago, this field hasn't been used for anything other than
some logging that would be better off logging the user ID anyway.
It existed in the first place simply because we weren't passing the
user_profile_id to Tornado at all.
Then, find and fix a predictable number of previous misuses.
With a small change by tabbott to preserve backwards compatibility for
sending `yes` for the `forged` field.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The original/legacy emoji reactions endpoints made use of HTTP PUT and
didn't have an API that could correctly handle situations where the
emoji names change over time. We stopped using the legacy endpoints
some time ago, so we can remove them now.
This requires straightforward updates to older tests that were still
written against the legacy API.
Fixes#12940.
The function only used the user's realm anyway, so this is a cleaner
API.
This should also make it more convenient to permanently delete
messages manually, since one doesn't have to fetch a random user in
the realm in order to delete a message using the management shell.
No functional change.
When creating realm with the ldap backend, the registration flow didn't
properly handle some things - the user wouldn't be set as realm admin,
initial subscriptions and messages weren't created, and the redirect
wasn't happening properly in the case of subdomains.
Steve Howell
Rohitt Vashishtha
Mateusz Mandera
Tim Abbott
Vishnu KS
Anders Kaseorg
Dinesh
harshavardhanpb
vsvipul
Ryan Rehman
akashaviator
rht
Chris Heald
Greg Price
Hashir Sarwar
Abhishek-Balaji
Tlazypanda
dustinheestand
Nat1405
Matheus Melo
Gloria Elston