Support a USB interface that shows up as a canbus adapter to linux.
Route both local and real canbus packets over that interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Rename the canbus.c code to canserial.c and introduce new wrapper
functions in canbus.c that connect the low-level canbus hardware code
to the high-level canserial.c code.
This is in preparation for adding "usb to canbus bridge mode".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The `logging.basicConfig` does not reconfigure default logger.
This results in printing only warnings/errors to stderr
instead of also info (or debug).
This fixes the issue by setting log level on root logger.
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
Calling python functions can have high overhead. Inline the
twos_complement code in the _extract_samples() inner loop.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The MPU9250CommandHelper() class is nearly a duplicate of
ADXL345CommandHelper(). Rename ADXL345QueryHelper() to
AccelCommandHelper and remove user facing references to "adxl345". Use
it directly from mpu9250.py .
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The mpu9250.ClockSyncRegression() class is a duplicate of
adxl345.ClockSyncRegression(). Remove the duplicate copy and use the
code from adxl345.py .
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The MPU9250QueryHelper() class is a duplicate of ADXL345QueryHelper().
Rename ADXL345QueryHelper() to AccelQueryHelper() and use it directly
from mpu9250.py .
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Adds a save_config_pending_items to the status reported by
configfile reflecting the items and values that a future
SAVE_CONFIG would actually persist.
Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
Move the uuid hash calculation to canbus.c and call canbus_set_uuid()
from src/stm32/chipid.c . This simplifies the low-level canbus
hardware code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Previously the code had canbus_read() which was called from task
context (for admin messages), and canbus_process_data() which was
called from irq context (used for data messages). Change that to a
single canbus_process_data() function that is called from irq context
(used for all messages). This simplifies the low-level hardware
specific canbus code and should make it easier to support other
hardware implementations.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Create a single CanData global variable to track the canbus state.
ARM micro-controllers generally produce better code when global
variables are in a struct.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Use a USB hex id to indicate that the device is already in bootloader
mode. This makes the rp2040 flashing code similar to the other
boards.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Introduce support for the stock Creality CR10 v3 printer, including the filament runout sensor. It also supports the optional BLTouch.
Signed-off-by: Luís Palma Nunes Mendes <luis.p.mendes@gmail.com>
The rp2040 USB may not connect after a reset. Implementation the
recommended workaround.
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
The CanBoot bootloader can often fit in 4KiB and that may be useful
for some devices with small flash sizes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
BIGTREETECH
chestwood96
Kevin O'Connor
Bruno Melo
adelyser
Kamil Trzciński
Eric Callahan
Yifei Ding
Dmitry Butyugin
Kurt Haenen
Andreas Fröhlke
bluesforte
CoreRasurae
Stefan Dej
Devin Fritz
Aart Röst