Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
4,488 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

4488 Commits

Author SHA1 Message Date
Kevin O'Connor 9136a29196 dotstar: Update to use LEDHelper class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 8b8818c0f7 neopixel: Update to use LEDHelper class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 96795def9c led: Add support for PWM controlled LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-31 13:08:12 -04:00
Kevin O'Connor 3340bb2ffd docs: Add explicit Jinja2 prerequisite to mkdocs-requirements.txt 
Avoid build failures by adding explicit Jinja2 version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:40:48 -04:00
Kevin O'Connor c08f83ff47 pid_calibrate: Improve Python3 compatibility in debug file output 
Reported by @kpishere.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:37:03 -04:00
Kevin O'Connor 4d1c3478ab angle: Add support for reading tle5012b chip registers (for debugging) 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 1275281ab6 angle: Initialize tle5012b chip variants to same configuration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 1b08553a42 angle: Report tle5012b temperature 
Export the tle5012b temperature readings when performing measurements.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor f9d505e376 sensor_angle: Support TLE5012b frame counter for timing 
Use the tle5012b internal frame counter to calculate the time of each
measurement.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 76558168d9 motan: Add support for analyzing "angle" sensor data 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor aec742ece4 angle: Initial support for angle sensor calibration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Kevin O'Connor 74937326d3 sensor_angle: Add support for bulk querying of spi angle sensors 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-29 20:34:46 -04:00
Alex Maclean 91ba9c00e3 atsam: Fix typo in sam4e_afec 
Accidentally introduced in 8049243221,
renders the AFE non-functional on SAME70. Should have had little impact
on SAM4E.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
 2022-03-28 10:19:58 -04:00
Alex Maclean 8049243221 atsam: Add support for SAM E70 
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
 2022-03-26 11:59:27 -04:00
Alex Maclean 99c2bf0ded lib: Add Atmel SAM E70 headers 
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
 2022-03-26 11:59:27 -04:00
Kevin O'Connor befb503cf0 workflows: Add comment when adding reviewer-needed label to idle ticket 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-26 11:42:40 -04:00
Charles Pickering 7e654aed2f docs: Fix config snippet for polar 
Previously the section for stepper_bed was intertwined with printer. This commit makes it match (../config/example-polar.cfg).

Signed-off-by: Charles Pickering <me@charlespick.xyz>
 2022-03-20 11:43:32 -04:00
SyrasX 3e0c0e9ccf
config: Added Config for Creality Ender 5 Pro 2020 (#4836) 
Signed-off-by:  Maxim Schessler <maxim.schessler@gmail.com>
 2022-03-18 20:42:15 -04:00
Justin Schuh 1390b4d600 virtual_sdcard: Allow spaces in file path for M23 
Also makes M23 work normally with rename_existing.

Signed-off-by: Justin Schuh <code@justinschuh.com>
 2022-03-18 11:44:33 -04:00
Kevin O'Connor b4b19b8fc1 docs: Add a link to Rotation_Distance.md in Example_Configs.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-17 21:50:33 -04:00
Kevin O'Connor 98d3fffd79 palette2: Fix typo (gmcd vs gcmd) 
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-17 20:53:07 -04:00
Kevin O'Connor a43973b0e0 skew_corrections: Fix typo (gmcd vs gcmd) 
Reported by @Ludy87.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-17 20:52:10 -04:00
Spencer Owen 743c766f47
config: Adds Ender 2 Pro config (#5359) 
Adds a default config for Ender 2 Pro. Printer uses creality 4.2.3 board

Signed-off-by: Spencer Owen <owenspencer@gmail.com>
 2022-03-17 20:43:55 -04:00
Kevin O'Connor d7f8bf351f docs: Fix section headers of [display] sections in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-16 12:04:41 -04:00
Kevin O'Connor 81283423f4 test: Minor file ordering change to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-14 14:50:20 -04:00
Apulo 1ccebfce1b
config: generic-th3d-ezboard-lite-v2.0.cfg (#5247) 
This file includes the build instructions and generic configuration for the TH3D EZBoard Lite v2.0 3d printer control board.

Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
 2022-03-14 14:48:22 -04:00
Ricardo Alcântara 0761026e36
pca9632: LED module for FlashForge Dreamer 3D printer (#4654) 
Added PCA9632 LED module support using software I2C from MCP4018
modulo drive the LED strip of a FlashForge Dreamer 3D printer.
Based on the PCA9533 module. 

Signed-off-by: Ricardo Alcantara <ricardo@vulcanolabs.xyz>
 2022-03-14 14:28:42 -04:00
Blinker73 df79893dbc
linux: Update i2c.c (#5295) 
Similarly to commit 8cf1b512 for SPI, the Rpi4 has more i2c busses to offer
This change allows klipper to use up to I2c bus 6
/boot/configtxt 
dtparam=i2c_arm=on
dtoverlay=i2c6

and 

pi@fluiddpi:~ $ ls -1 /dev/i2c*
/dev/i2c-1
/dev/i2c-6

Signed-off-by: Sylvain Dansereau <brutus_dansereau@hotmail.com>
 2022-03-14 14:24:27 -04:00
Kevin O'Connor 082d773e2e test: Add printer-monoprice-select-mini-v1-2016.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-14 14:20:24 -04:00
jace c27a9182f3
config: Config for Monoprice Select Mini v1 (#5243) 
Signed-off-by: Jace Wiseman <jwiseman@gmail.com>
 2022-03-14 14:17:32 -04:00
Miklós Tusz c8cc2a1e27 scripts: Migrate `check_whitespace.py` to python3 
Modified strings used in pattern matching to b-strings as are expected
with python3.

Signed-off-by: Miklos Tusz <miklos@aon3d.com>
 2022-03-14 13:53:21 -04:00
Stefan Dej 12e304fbec temperature_fan: add missing round function to get_status temperature 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2022-03-14 13:48:38 -04:00
Ofir Petrushka 5d0d6d5a32
config: Adding bed_screws to Ender 3 (#5252) 
Signed-off-by: Ofir Petrushka <ofir.petrushka@gmail.com>
 2022-03-14 13:38:05 -04:00
just-trey 352f735297
config: Elegoo Neptune 2 config update (#5213) 
Signed-off-by: Trey Wentz <trey.wentz@gmail.com>
 2022-03-14 12:50:38 -04:00
electron2410 02d770ae3c
neopixel: add BGR for neopixel (#5160) 
Signed-off-by: Thomas Liebold <electron2410@gmail.com>
 2022-03-14 12:30:58 -04:00
Kevin O'Connor 7731c30422 stm32: Allow 32KiB bootloader to be specified for all STM32F4 builds 
Reported by @GerogeFu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-14 12:26:41 -04:00
Kevin O'Connor 30098db22a docs: Fix typo in RPi_microcontroller.md 
Reported by @bradengel.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-14 00:38:25 -04:00
Kevin O'Connor 5e91c5de28 workflows: Update invalid-label-bot.yaml to use actions/github-script@v6 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:14:43 -04:00
Kevin O'Connor 021459e53e workflows: Update stale-issue-bot.yaml to use actions/github-script@v6 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:13:56 -04:00
Kevin O'Connor 2f8f99acae workflows: Mark inactive github PRs with "reviewer needed" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:13:56 -04:00
Kevin O'Connor 341e56dcea workflows: Automatically close PRs with "reviewer needed" that become stale 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:13:56 -04:00
Kevin O'Connor cc3c4c81e9 workflows: Add github tool to add a comment to PRs marked "reviewer needed" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:13:55 -04:00
Kevin O'Connor 1de0d75079 docs: Move "benefits" review section up in CONTRIBUTING.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-13 17:13:55 -04:00
Kevin O'Connor e3beafbdb4 stm32: Clarify CCIPR2 setting in stm32g0.c 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-11 14:12:11 -05:00
Fritz Webering 24e7bbf0df
docs: Add missing bltouch lift_speed option to Config_Reference.md (#5344) 
Signed-off-by: Fritz Webering <fritz@webering.eu>
 2022-03-11 13:35:08 -05:00
Kevin O'Connor 4ce2d379bb stm32: Simplify CCIPR2 register assignment on stm32g0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-09 13:28:00 -05:00
BIGTREETECH d75154d695
stm32: USB clock source from PLLQCLK on stm32g0 (#5341) 
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
 2022-03-09 13:11:04 -05:00
Kevin O'Connor c721c20c97 docs: Improve G-Codes.md description of extruder commands 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-08 15:34:11 -05:00
Kevin O'Connor c067d4df73 klipper3d-deploy: Temporarily disable translations on klipper3d.org 
Temporarily disable support for multiple languages on the main
klipper3d.org site.  The search functionality isn't working correctly
with translations.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2022-03-08 14:58:36 -05:00
Pedro Lamas 38b992532a display_status: stops M73 from setting progress to 0 if P missing 
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
 2022-03-08 14:20:35 -05:00