77add95675
heaters: add last pwm value to heater.get_status ( #3621 )
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2020-12-13 20:08:16 -05:00
43a6d18f13
docs: Fix board_pins link in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 12:36:14 -05:00
89183edbda
manual_probe: Use configfile note_valid=False when inspecting Z position_endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:41:40 -05:00
2d6b44152a
bltouch: Recommend using a pullup on the sensor_pin
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-11 11:01:44 -05:00
f3c5be0f00
gpiocmds: Merge digital output and soft pwm code
...
The digital output commands implement a subset of the software pwm
commands. Change the host code to just use the software pwm commands
and simplify the micro-controller code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 12:06:26 -05:00
a1baefc2c2
temperature_mcu: Add enhanced support for monitoring mcu temperature
...
Add a "temperature_mcu" tool that can monitor builtin micro-controller
temperature sensors.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 02:39:06 -05:00
6bbfc869a1
docs: Improve spi and i2c description in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-08 08:53:18 -05:00
6fe2ee0380
docs: Minor wording change to thermistors in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 12:12:21 -05:00
e83801daab
heaters: Add a TEMPERATURE_WAIT command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 09:57:13 -05:00
654cbeb286
docs: Group temperature sensors together in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-05 18:16:20 -05:00
fc8ac8fe25
docs: Move micro-controller information together in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-05 14:39:37 -05:00
19a96346a8
gpiocmds: Use move queue for software pwm
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
9cdf9bb6ec
gpiocmds: Use move queue for digital output pins
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
e8ec1801ff
pwmcmds: Use move queue for hard PWM
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
086f0fafde
gpiocmds: Send soft pwm cycle_time separately from schedule_soft_pwm_out
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
21a3a8559d
docs: Add indentation to generated table-of-contents on klipper3d.org site
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 19:24:40 -05:00
1f9516ad7f
docs: Simplify javascript link modification for external references
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 18:44:31 -05:00
14952ccef5
docs: Add links to default display.cfg and menu.cfg in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 18:11:29 -05:00
6e48ee537f
docs: Fix "github pages" rendering of pictures in Resonance_Compensation.md
...
The "github pages" service wont properly render a table with
"|:--:|:--:|" and no table contents. In contrast, normal github
markdown contents wont show the table without it. For now, remove the
line as the normal github markdown contens look okay even if the
content isn't rendered as a table.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 15:27:38 -05:00
1f2d9c051c
docs: Use relative links for files outside the docs/ directory
...
Use javascript to fixup the "github pages" rendering of links to files
outside the docs/ directory. Then use normal relative links in the
documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 15:06:58 -05:00
a2d1e03b91
docs: Yet again try to fix github-pages rendering of Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:41:47 -05:00
23f547169c
rpi_temperature: Don't read min_temp/max_temp directly from config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:37:56 -05:00
b911db4c0d
rpi_temperature: New module to monitor RPi temperature ( #3587 )
...
Module to monitor RPi cpu temperature
Signed-off-by: Al Crate <aleph@al3ph.org>
2020-12-03 12:35:37 -05:00
a1ae548766
docs: Fix github-pages rendering of Command_Templates.md (again)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:28:35 -05:00
5ddb093421
docs: Fix github-pages error in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:27:02 -05:00
d7053f6e71
save_variables: Support saving variables to a disk file
...
Signed-off-by: Dushyant Ahuja dusht.ahuja@gmail.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:19:47 -05:00
91de1560a7
menu: modifications ( #3262 )
...
- remove lot of helper methods
- differentiate class instantiate from config or directly
- don't use 'enable' template rendering when static value is used.
- new element 'disabled'
- other internal adjustments
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-12-03 10:46:55 -05:00
422386e94c
docs: Clean up example values in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-02 08:44:37 -05:00
d42930e232
docs: Update Command_Templates.md to note printer.controller_fan.speed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 12:51:49 -05:00
88c7bf830f
G-Codes: Minor formatting fix
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-23 11:52:46 -05:00
111f084c6a
docs: Add additional command reference links to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-23 11:27:01 -05:00
d1173d59c9
docs: Add more links to G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-23 11:25:19 -05:00
c6f870a655
docs: Update RPi_microcontroller.md links to render correctly on klipper3d.org
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-22 20:33:49 -05:00
fcb78e50e5
hd44780: allow to configure line length ( #3543 )
...
This allows to use 16x4 displays rather than only 20x4.
Signed-off-by: Martin Hierholzer <hier@beta-centauri.de>
2020-11-20 14:49:38 -05:00
c6f0884140
docs: Add some additional links to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 14:22:13 -05:00
6c0c05774b
docs: Fix quad_gantry_level header in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 14:02:59 -05:00
e2528c13fa
docs: Add more links to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 13:34:50 -05:00
bdd938b578
board_pins: Use an explicit parameter to specify mcu name(s)
...
Add an 'mcu' option to the board_pins config and use that to specify
the name of the mcu to apply the aliases to. Support applying the
aliases to multiple mcus.
Add support for any number of options starting with an "aliases_"
prefix.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 12:00:36 -05:00
37b475815e
docs: Move replicape reference from generic-replicate.cfg to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-20 11:57:18 -05:00
15b5dbaf8f
docs: Move config reference information to new Config_Reference.md
...
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-18 20:10:21 -05:00
bdaca32707
docs: Note the change in "print_stats.duration"
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-11-13 20:48:15 -05:00
fc0a18f891
docs: Document "register_remote_method" endpoint
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-11-04 18:32:30 -05:00
7ad36a2164
github: Run continuous integration tests using "github actions"
...
Use "github actions" instead of "travis ci" for the automatic build
regression tests.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-30 15:23:42 -04:00
7263077db5
neopixel: Add support for RGBW LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-29 12:00:25 -04:00
56004c0228
mcu: Don't default serial config option to /dev/ttyS0
...
If the mcu config section is omitted, it leads to confusing error
messages. Don't default the serial config option to /dev/ttyS0 to
improve the error reporting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-28 15:35:08 -04:00
106d1d2a2a
docs: Note the release of v0.9.1
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-28 10:55:21 -04:00
2bcf06a295
docs: Update release notes for v0.9.0 release
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-20 19:40:32 -04:00
1b471b482d
docs: Note PROBE_CALIBRATE results invalidated on motion system update
...
Any hardware change to the hotend or probe, change to the kinematics,
or change to the bed tilt is likely to invalidate the results of
PROBE_CALIBRATE. Try to warn the user of that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-20 19:26:24 -04:00
abb0d8801c
docs: Note screws_tilt_adjust nozzle/probe coordinates in Manual_Level.md
...
The screws_tilt_adjust takes nozzle coordinates, but the goal is for
the Z probe to be above the screws.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 19:24:54 -04:00
ac57b6522e
docs: Minor formatting change to Probe_Calibrate.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 18:48:43 -04:00
6b23dd9ff1
docs: Provide response_template in subscription examples in API_Server.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 10:59:21 -04:00
bfcd5536fc
docs: Add initial API_Server.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-17 10:41:14 -04:00
a87e5616a0
docs: Add Measuring_Resonances.md to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-16 21:32:33 -04:00
cf6d302ac3
docs: Update Command_Templates.md with available get_status() fields
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-15 13:29:50 -04:00
c0eefc0076
docs: Recommend disable "dynamic acceleration control" during tuning
...
Note that "dynamic acceleration control" should be disabled in the
pressure advance and input shaper tests.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-15 12:07:10 -04:00
f8c4f90c04
resonance_tester: Resonance testing and input shaper auto-calibration ( #3381 )
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-10-14 20:08:10 -04:00
d53365f996
docs: Updates to Features.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-13 16:38:32 -04:00
55e20f2c19
mcu: Add support for changing cycle_time in set_pwm()
...
Signed-off-by: Guy Shapira <gayuha@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-26 20:55:56 -04:00
27cefb2b38
gpiocmds: Add soft-pwm frequency modulation support
...
Signed-off-by: Guy Shapira <gayuha@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-26 20:51:38 -04:00
3ac636b33e
docs: document additions to BED_MESH_CALIBRATE
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-09-15 20:36:55 -04:00
063f9a2c02
docs: Fix "QUERY_STATUS" typo in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 23:11:24 -04:00
5a2f406fd1
probe: add get_status wrapper to probe for last_query from query_probe command ( #3296 )
...
Add get_status wrapper with last_query status for macros It is sometimes useful to determine the state of the probe from a macro. If the probe is connected to an endstop pin, the results can be obtained via QUERY_ENDSTOPS but if a physical endstop is in use in addition to the probe the probe state cannot be obtained. This change allows one to use QUERY_PROBE and then access the printer.probe.last_query object to obtain the state.
Signed-off-by: Paul McGowan <mental405@gmail.com>
2020-09-09 23:10:35 -04:00
9197975625
docs: Note that FORCE_MOVE can lead to "No next step" errors in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-08 10:18:28 -04:00
3405095f0a
adxl345: Add support for adxl345 accelerometer
...
Add support for taking measurements from an adxl345 accelerometer via
SPI interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-05 09:11:04 -04:00
c3e9999e0c
docs: Update OctoPrint and OctoPi versions in Installation.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-04 21:24:26 -04:00
37d7742468
spi_temperature: fix MAX31865 temperature conversion ( #3274 )
...
Signed-off-by: Adrian Keet <arkeet@gmail.com>
2020-09-02 09:32:30 -04:00
2bb6b0f58f
docs: Expand on host computer restrictions in the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-26 10:11:21 -04:00
1286d3006c
gcode_move: Move GCodeMove class from gcode.py to new extras module
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
b691e013f0
docs: Document printer.gcode_move variables in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
4c5e93d51d
gcode: Split G0/G1 command handling to new gcode_move class
...
Split up the main GCodeParser class into GCodeDispatch and GCodeMove
classes. The GCodeMove class is now available using the "gcode_move"
printer object name. This split simplifies the gcode.py code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
5f47a91464
docs: Add idle_timeout get_status() info to Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
b2c78d71b0
gcode: Remove "action_" commands from get_status() calls
...
Rename printer.gcode.action_emergency_stop() to
action_emergency_stop(), printer.gcode.action_respond_info() to
action_respond_info(), and printer.gcode.action_respond_error() to
action_raise_error() in command templates.
This simplifies the get_status() interface, as returning callable
functions from that interface was confusing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-20 21:03:22 -04:00
1bdf705524
hall_filament_width_sensor: Fix Flow update before next pending_position #3184 ( #3198 )
...
After reading the first item of self.filament_array, filament_width is updated back to self.nominal_filament_dia or self.diameter instead of retaining the value until next pending_position.
Updated Filament Menu Template.
Signed-off-by: Nicola Falciani <nicola.fal@gmail.com>
2020-08-19 18:58:49 -04:00
04bd48ca9d
adc_temperature: add support for AD597 ( #3164 )
...
The AD597 thermocouple amplifier is used in the Raise3D N2+ (and
possibly others).
Signed-off-by: Bryan Boettcher <bryan.boettcher@gmail.com>
2020-08-09 21:06:43 -04:00
864d172b68
docs: Note menu change in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-09 09:37:54 -04:00
efebbb9a2f
tmc5160: diag0 support ( #3159 )
...
Allow for diag0 only hardware to use sensorless homing.
Signed-off-by: Trevor Jones <trevorjones141@gmail.com>
2020-08-09 08:17:51 -04:00
c9e7119a93
fan_generic: Add support for named fans and gcode to control them ( #3054 )
...
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
2020-08-07 11:39:44 -04:00
605c32fc98
docs: Move and reword the Resonance_Compensation.md link in Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-05 23:28:54 -04:00
74c0e3a484
docs: document changes to the virtual_sdcard module
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-08-05 13:46:24 -04:00
fe84968bdc
docs: Add uninstall notes to faq
...
From comments in https://github.com/KevinOConnor/klipper/issues/1084
This documents the script added in 0ba1f5109d
2020-08-03 14:16:34 -04:00
d33a34614f
docs: Add RPi_microcontroller.md link in Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-01 13:09:09 -04:00
f3b980c1b2
docs: Suggested improvements to Input Shaper tuning guide
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-29 21:28:18 -04:00
b944666bb1
docs: ringing_tower model for input shapers tuning
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-29 21:28:18 -04:00
b62a0d5db5
docs: First version of documentation for Input Shaper tuning
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-29 21:28:18 -04:00
25a9a32ecb
docs: Move SET_TEMPERATURE_FAN_TARGET to its own section in G-Codes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-26 10:41:43 -04:00
ab923883f7
docs: Update G-Codes.md for SET_TEMPERATURE_FAN_TARGET ( #3122 )
...
Added extended G-Code documentation for SET_TEMPERATURE_FAN_TARGET
Signed-off-by: Martin Nowroth <madnoth@gmail.com>
2020-07-26 10:39:53 -04:00
428a8d4881
servo: Remove servo ENABLE parameter
...
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-25 11:39:39 -04:00
53092a6474
docs: Add link to config/sample-macros.cfg in Slicers.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-16 13:04:00 -04:00
e4d0044be8
docs: Add a "hardware pin type" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-16 13:04:00 -04:00
4bdc11a8b3
input_shaper: Initial support of input shaping ( #3032 )
...
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-05 20:54:38 -04:00
09a3d018a8
docs: Fix broken links in RPi_microcontroller.md
...
Also add a note regarding "Permission denied" errors.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2020-07-05 20:48:12 -04:00
b3298d8992
hall_filament_width_sensor: Added width logging ( #2981 )
...
Signed-off-by: Denis Ignatenko deniss979@gmail.com
2020-06-16 13:36:49 -04:00
35bbd989e4
docs: LinuxMCU doc & script ( #2956 )
...
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
2020-06-12 20:32:12 -04:00
467e8e6f40
display: Default DISPLAY=display in SET_DISPLAY_GROUP command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-09 12:19:53 -04:00
68fcbe2a62
display: add SET_DISPLAY_GROUP command ( #2969 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2020-06-09 12:07:25 -04:00
d94dd8e9fd
docs: Note changes to glyph names
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-08 16:55:09 -04:00
b0e8e84d6e
docs: Add linux mcu test results to Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-07 09:27:55 -04:00
518fe023b4
extruder_stepper: Support changing synced extruder on the fly ( #2824 )
...
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
2020-06-06 14:30:58 -04:00
967fe1c01c
HallFilamentWidthSensor: Use current width instead of nomal width while delay is not over ( #2907 )
...
Option for using the current diameter instead of nominal while the first measurement isn't in place
Signed-off-by: Matthias Pabel <matthias.pabel@hs-augsburg.de>
2020-06-06 14:19:00 -04:00
a6f2fc7179
docs: Minor reword to latest Config_Changes.md update
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-06 12:51:36 -04:00
Stefan Dej
Kevin O'Connor
Pascal Pieper
Al
Janar Sööt
Martin Hierholzer
Arksine
Dmitry Butyugin
Guy Shapira
Paul McGowan
Adrian Keet
alocin73
Bryan Boettcher
Trevor Jones
bondus
Elton Law
Martin Nowroth
Denis Ignatenko
Lucio Tarantino
Florian Heilmann
theophile
matpab