6e79152f47
htu21d: Implement support for min_temp/max_temp checks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-01 11:30:27 -05:00
a15952770b
bme280: Implement support for min_temp/max_temp checks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-01 11:27:16 -05:00
74244ab0eb
spi_temperature: Improve handling of min_temp/max_temp overflows
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-01 10:37:19 -05:00
333f8c210f
lm75: Implement support for min_temp/max_temp checks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-01 10:37:19 -05:00
7775e0ed54
lm75: Use getfloat() for reading the lm75_report_time parameter
...
Reported by @theopensourcer.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-02-01 10:26:14 -05:00
60e4cddf36
hd44780: Add hd44780 protocol init config
...
LDO OLED needs a different init string.
Fixes : #3722
Signed-off-by: Thomas Kroll <t.kroll@outlook.com>
2021-01-31 19:35:40 -05:00
5d960aef37
htu21d: Fix time reporting of temperature measurements
...
The temperature callback takes a "print time" not a "system time".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 15:38:16 -05:00
8de86ad51f
rpi_temperature: Fix time reporting of temperature measurements
...
The temperature callback takes a "print time" not a "system time".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 15:37:37 -05:00
bded15b743
temperature_mcu: Improve handling when in debug output mode
...
Call mcu_adc.setup_minmax() even in debug output mode so that the
debugging output contains a more accurate configuration.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 15:28:16 -05:00
04179f3eae
bme280: Disable bme280 when using debug output
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 15:19:43 -05:00
c3e3b2280a
rpi_temperature: Fix missing get_report_time_delta() callback
...
Reported by @ronald5555.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 14:00:41 -05:00
cf8d5a6606
rpi_temperature: Disable rpi_temperature when using debug output
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 13:59:09 -05:00
29831a2f69
rpi_temperature: Minor formatting changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 13:58:54 -05:00
db86a4edcb
temperature_mcu: Disable the temperature_mcu when using debug output
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-24 13:56:57 -05:00
b9899a23a3
menu: Update menu.cfg sd_card menu enable condition ( #3826 )
...
Change SD card enable condition and add Cancel printing option.
Signed-off-by: John Smith <login721@gmail.com>
2021-01-24 10:35:05 -05:00
1e2eb9a4de
hall_filament_width_sensor: Fix race condition ( #3790 )
...
Fix race condition of filament width sensor
Added fix to similar code of TSL1401CL filament width sensor
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
2021-01-22 13:41:34 -05:00
8cc1d84180
configfile: Add printer.configfile.settings command template parameter
...
Make available the parsed value (or default value) for config options
to command templates and to the api server.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-20 16:25:25 -05:00
023a985bfc
gcode_macro: Use deepcopy() on get_status() results
...
If a get_status() method returns a mutable object (such as a list or
dict) then it would be possible for a gcode command template to
incorrectly alter the program's internal state. Perform a deepcopy()
operation on all get_status() return results to avoid that.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-20 16:25:25 -05:00
8a6619d18e
mcu: Add a get_status() callback with micro-controller info and stats
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-19 23:12:41 -05:00
611b76369f
winch: Improve python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-17 22:54:16 -05:00
0e9cb2abac
save_variables: Import ConfigParser as configparser for better Python3 support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-17 22:46:04 -05:00
dac0fba50d
menu: Update menu.cfg ( #3778 )
...
Update min/max in move menu to printer variables.
Signed-off-by: Alex Zellner <alexander.zellner@googlemail.com>
2021-01-17 22:39:54 -05:00
9278f56e36
webhooks: Fix use of deprecated Exception.message attribute ( #3781 )
...
Since Python 2.6, the BaseException.message attribute is deprecated (PEP-352[1])
in favor of e.args[0] or str(e). This commit replaces e.message with str(e).
[1] https://www.python.org/dev/peps/pep-0352/
Signed-off-by: Maël Kerbiriou <m431.kerbiriou@gmail.com>
2021-01-17 22:37:41 -05:00
c57352a336
homing: Fix references to CommandError()
...
Commit ea85d419
2021-01-11 10:01:14 -05:00
8260a3a0c3
homing: Make homing.py an "extras" module
...
Move klippy/homing.py to klippy/extras/homing.py and convert the code
to an "extras" modules.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-08 14:01:34 -05:00
ea85d419de
gcode: Move definition of CommandError and Coord from homing.py to gcode.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-08 12:07:45 -05:00
c8434ec54b
kinematics: Calculate axis_minimum/axis_maximum in advance
...
Calculate the get_status() axis_minimum and axis_maximum fields in
advance so that they don't need to be calculated on each get_status()
call.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-01-08 11:52:28 -05:00
e68cf08d15
kinematics: report all axis limits (min/max)
...
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-12-28 10:19:57 -05:00
a5ebe5825a
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command ( #3674 )
...
Signed-off-by: Justin Schuh <code@justinschuh.com>
2020-12-24 11:34:26 -05:00
1a9218532b
heaters: Add MAXIMUM option to TEMPERATURE_WAIT command
...
Signed-off-by: Justin Schuh <code@justinschuh.com>
2020-12-23 18:16:46 -05:00
16963a8e1a
configfile: Improve error message when a required option is missing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-22 20:07:39 -05:00
ca8e6ad89b
configfile: Minor line wrapping changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-22 20:06:15 -05:00
1b1a97e8bd
shaper_calibrate: Choose input shapers accounting smoothing
...
Improved algorithm to choose the 'optimal' shaper frequency taking
shaper smoothing into account. This may choose a frequency with
slightly more vibrations but less smoothing. Also allow users to
limit the maximum input shaper smoothing.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-12-22 18:37:41 -05:00
a637c2f110
heaters: Fix TEMPERATURE_WAIT command with extruder and heater_bed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-22 15:22:13 -05:00
f84a570dde
temperature_mcu: Fix slope on stm32f070
...
The stm32f070 has a negative temperature slope.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-19 11:19:44 -05:00
e0395c69aa
temperature_mcu: Fix slope on stm32f1
...
The stm32f103 has a negative temperature slope.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-19 10:38:50 -05:00
96eba9f2df
endstop_phase: Obtain phases directly from stepper microsteps config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:30:32 -05:00
7dcc778b6c
stepper: Calculate step_distance from rotation_distance
...
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-18 10:30:32 -05:00
e786748f18
heaters: Always register heater pin as a pwm pin
...
There's no need to sometimes register the pin as a 'digital_out' pin
instead of as a 'pwm' pin.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-15 12:21:04 -05:00
77add95675
heaters: add last pwm value to heater.get_status ( #3621 )
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2020-12-13 20:08:16 -05:00
0923450286
tmc: Use configfile note_valid=False when inspecting stepper step_distance
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:42:25 -05:00
14fd40e3f9
safe_z_home: Use configfile note_valid=False when inspecting z position_max
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:42:25 -05:00
b25520795d
probe: Use configfile note_valid=False when inspecting z position_min
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:42:25 -05:00
89183edbda
manual_probe: Use configfile note_valid=False when inspecting Z position_endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:41:40 -05:00
65a49d17dd
hd44780: Make the 4-bit init sequence more robust
...
The previous init sequence relied on the display ignoring commands if
they are sent faster than 40us. Some displays may not have this
limit.
Rework the init to make it more robust to command transmission times.
The new init should still transition the display into 4-bit mode even
if the display processes commands faster than 40us.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-12 10:07:53 -05:00
f3c5be0f00
gpiocmds: Merge digital output and soft pwm code
...
The digital output commands implement a subset of the software pwm
commands. Change the host code to just use the software pwm commands
and simplify the micro-controller code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 12:06:26 -05:00
a1baefc2c2
temperature_mcu: Add enhanced support for monitoring mcu temperature
...
Add a "temperature_mcu" tool that can monitor builtin micro-controller
temperature sensors.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 02:39:06 -05:00
e83801daab
heaters: Add a TEMPERATURE_WAIT command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 09:57:13 -05:00
c4a37756ea
temperature_sensor: Report temperature in stats
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-06 21:55:26 -05:00
9e293be5e0
pca9685: Use move queue for pwm updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
Kevin O'Connor
Thomas Kroll
Chip
Pascal P
Alex Zellner
Maël Kerbiriou
Janar Sööt
Justin Schuh
Dmitry Butyugin
Stefan Dej