Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
2,811 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

497 Commits

Author SHA1 Message Date
test3210-d 9a65a4569b hall_filament_width_sensor: Add new filament sensor 
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
 2020-02-14 13:14:34 -05:00
Kevin O'Connor 049d8c2a94 config: Update description of z_hop in safe_z_home 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-14 12:42:21 -05:00
Kevin O'Connor fd6baa3d16 config: Minor wording change to gcode_macro rename_existing description 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-13 21:52:00 -05:00
Matt Shirley b0b950b7e1
config: Add Wanhao Duplicator 9 MK1 (#2497) 
Also applies to the Monoprice Maker Pro MK1.
This config is based on the version from Chris Barnes (https://www.facebook.com/Jarannis)
found on https://pastebin.com/raw/wm8PQezy. This config was mostly working and I
only had to change a few things:

  - updated key names for min_point and max_point to mesh_min and mesh_max
  - enabled PID control
  - tweaked bounds to allow movement during mesh leveling
  - removed all comments
  - decreased homing speed slightly
  - sane bed mesh sample defaults

In response to Kevin O'Connor:

- remove pressure_advance setting from extruder section
- remove respond section
- remove pause_resume section

Signed-off-by: Matt Shirley <mdshw5@gmail.com>
 2020-02-13 20:52:31 -05:00
Kevin O'Connor 9818055ac3 gcode_macro: Support overriding of builtin g-code commands 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-12 20:42:03 -05:00
FanDjango 4d9a36b34f
homing: Ability to set retract speed between homing moves (#2487) 
On the retract move between homing moves, use a different speed (typically a faster one).

Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-12 10:09:39 -05:00
FanDjango cb042e749d
homing_heaters: Turn off heaters during homing/probing (#2486) 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-12 10:08:30 -05:00
Kevin O'Connor 2336d2d6ab config: Fix generic-fysetc-f6.cfg stepper_z cs_pin 
Reported by @jourjine

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-03 15:45:46 -05:00
Kevin O'Connor c36fe76d69 probe: Add support for configuring lift_speed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-31 15:47:06 -05:00
Junliang Yan f29022499e config: Add Skr v1.4 configuration (#2423) 
Signed-off-by: John Yan <john.yan1019@gmail.com>
 2020-01-28 12:13:54 -05:00
mtw3d 2b3ea29f30 config: Add example printer-mtw-create-2015.cfg config file 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-24 09:28:03 -05:00
Kevin O'Connor 6e020123c6 test: Add printer-monoprice-mini-delta-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 23:29:32 -05:00
Kevin O'Connor 196210cad2 config: Fix file permissions of generic-flyboard.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 22:25:42 -05:00
Kevin O'Connor 2ea3631222 delta: Add print_radius option to customize valid XY radius 
Add ability to override the default XY move checking radius.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 21:14:09 -05:00
Kevin O'Connor 8bf3e56301 config: Add example generic-flyboard.cfg config file 
Reported by @DJDOUBLEG.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 19:23:00 -05:00
Kevin O'Connor fc6d045ded config: Add example generic-archim2.cfg config 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:32:52 -05:00
Kevin O'Connor 0160a7db9a config: Add an example generic-mks-sgenl.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:07:34 -05:00
Kevin O'Connor ff0324b0c2 config: Add generic-mightyboard.cfg 
Reported by @fragginright.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 17:49:10 -05:00
chris-hammond dd77a2ec16 config: Adding a config file for the monoprice mini delta (#2392) 
A default config file for Monoprice Mini Delta printers.
Works when firmware is flashed via ST-Link V2 and when a
10A power supply is available. Lots of comments about wanting
to try pressure advance on the FB group, so I figured it was
a good time to get this added.

Signed-off-by: Chris Hammond <chammond@georgefox.edu>
 2020-01-14 10:33:38 -05:00
Arksine b562328bd0 config: add BME280 documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-13 22:29:50 -05:00
Hywelmartin b28df43b26 config: Fix thermistor association in generic-bigtreetech-skr-pro.cfg (#2390) 
Signed-off-by: Martin Malmqvist <hywelmartin@gmail.com>
 2020-01-13 18:23:03 -05:00
Arksine edae40c36f docs: Update documentation to reflect bed_mesh changes 
Also add new bed_mesh.md documentation.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Arksine dc51788f9a test: update sample configs and test configs with new bed_mesh options 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor 005cfea5c3 gcode: Fix detection of some "extended" g-code commands 
Fix typo that resulted in _get_extended_params() being called for all
commands.  Allow "extended" g-code commands to contain numbers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-07 19:17:20 -05:00
Kevin O'Connor ac863a95b6 rotary_delta: Initial support for rotary delta kinematics 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:52:42 -05:00
Simo Apell 90bc1679a2 extruder_stepper: Initial support for synchronized extruder steppers 
Signed-off-by: Simo Apell <simo.apell@live.fi>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:03:05 -05:00
David Smith 6972b6303d docs: Updates for gcode_macro naming (#2317) 
Add note about numbers in macro names.  Add note about variable name case restriction. Add set variable example.

Signed-off-by: David O Smith <davidosmith@gmail.com>
 2020-01-06 10:59:40 -05:00
Tobias Weiß 61bcb6b47f config: Update generic-fysetc-s6.cfg (#2293) 
SPI communication with TMC drivers is possible with hardware SPI using the "spi1" bus.

Signed-off-by: Tobias Weiß <t.weiss@bk.ru>
 2019-12-18 15:54:56 -05:00
Kevin O'Connor 0a86190bae display: Revert "display: Add ST7567 display support (#1540)" 
This reverts commit 1b92af6078.

The standard "uc1701" lcd_type can now be used in place of the custom
"st7567" lcd_type.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 12:30:20 -05:00
Tobias Weiß 58abd2925e config: Fysetc S6 generic configuration (#2220) 
Signed-off-by: Tobias Weiß <t.weiss@bk.ru>
 2019-12-18 11:13:25 -05:00
Georgios Karnas 9c25f42f4a config: Flash instructions for printrboard (#2278) 
Signed-off-by: Georgios Karnas <kargeor@gmail.com>
 2019-12-17 10:03:57 -05:00
Kevin O'Connor 9628d9b1ac config: Minor wording change in example-extras.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-16 22:54:21 -05:00
Kevin O'Connor 7c81a16bd3 config: Update example-extras.cfg - extruder.activate_gcode was removed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-16 21:27:55 -05:00
Kevin O'Connor ab5540bd34 config: Add printer-anet-a4-2018.cfg config file 
Reported by @Alkarasu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 22:12:58 -05:00
Kevin O'Connor cff24b0220 config: Add multi extruder sample files 
Add sample-multi-extruder.cfg and sample-idex.cfg files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:34 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
David Smith d1f4f18810 config: Add example for including a parameter in a macro call (#2251) 
Add description to default_parameter of g-code macro description of method to call macro with a non-default value.

Signed-off-by: David Smith <davidosmith@gmail.com>
 2019-12-10 14:01:41 -05:00
Kevin O'Connor 8f1753c8ce config: Update "Fysetc Mini 12864Panel" in sample-lcd.cfg 
Use the more standard "lcd_type: uc1701" and reverse the encoder pins.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 09:13:46 -05:00
Kevin O'Connor 8e296db410 test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-03 13:34:46 -05:00
Puffy 3c526a71f9 config: Basic config for Wanhao Duplicator i3 mini (#2238) 
Signed-off-by: Grant Gordon <grant.gordon@imaginet.co.za>
 2019-12-03 13:32:43 -05:00
Kevin O'Connor 2d97e0e218 uc1701: Add support for rst_pin 
Add support for an optional uc1701 rst_pin.  Use the same reset pin
code handling with the SSD1306 code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-02 10:25:30 -05:00
Jakub Kruszona-Zawadzki 41dd53f62c config: fixes in anycubic delta plus default config file (#2176) 
Signed-off-by: Jakub Kruszona-Zawadzki <acid@moosefs.com>
 2019-12-01 18:51:46 -05:00
Kevin O'Connor 7bd96950cb config: Minor comment changes to example-extras.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-28 10:34:59 -05:00
Matt Baker 8d93d1a8ef uc1701: add config option for sh1106 type with up to 132 columns. 
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
 2019-11-26 19:40:39 -05:00
Kevin O'Connor 982567a69a config: Rename avrsim.cfg to generic-simulavr.cfg 
Rename the file to be more similar to the naming of other files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 86b074e1ee config: Rename example-multi-mcu.cfg to sample-multi-mcu.cfg 
Rename the sample file to be more similar to the naming of other
files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Justin Schuh 93f1e6dd86 FAN: Kick start fan when the increase is more than 50% (#2085) 
Large increases in fan speed can suffer from acceleration lag, so this
change kick starts the fan for a change of 50% or more in the same way
that starting the fan from 0% does.

Signed-off-by: Justin Schuh <code@justinschuh.com>
 2019-11-24 18:37:30 -05:00
Kevin O'Connor 5f5896ad71 extruder: Add support for instantaneous corner velocity 
Add mechanism to perform look-ahead between moves with different
extrusion ratios.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 13:18:21 -05:00
Kevin O'Connor 6d0c55b6c1 extruder: Initial support for "smoothed pressure advance" 
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 13:18:19 -05:00
Kevin O'Connor 6116a5d48f stepper_enable: Remove ability to use a list of pins in enable_pin 
Now that the tmc drivers perform automatic soft stepper enabling,
there is no need to be able to list multiple pins in the enable_pin
config setting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 18:45:31 -05:00