mirror of https://github.com/Desuuuu/klipper.git
config: Basic config for Wanhao Duplicator i3 mini (#2238)
Signed-off-by: Grant Gordon <grant.gordon@imaginet.co.za>
This commit is contained in:
parent
99a74d9f07
commit
3c526a71f9
|
@ -0,0 +1,77 @@
|
|||
# This file contains pin mappings for the Wanhao Duplicator i3 mini.
|
||||
# (circa 2017) To use this config, the firmware should be compiled
|
||||
# for the AVR atmega2560.
|
||||
# Pin numbers and other parameters were extracted from the official
|
||||
# Marlin source available at: https://github.com/garychen99/i3Mini
|
||||
|
||||
# See the example.cfg file for a description of available parameters.
|
||||
|
||||
[stepper_x]
|
||||
step_pin: ar22
|
||||
dir_pin: !ar23
|
||||
enable_pin: !ar57
|
||||
step_distance: 0.0125
|
||||
endstop_pin: ^!ar19
|
||||
position_endstop: 120
|
||||
position_max: 120
|
||||
homing_speed: 30.0
|
||||
|
||||
[stepper_y]
|
||||
step_pin: ar25
|
||||
dir_pin: ar26
|
||||
enable_pin: !ar24
|
||||
step_distance: 0.0125
|
||||
endstop_pin: ^!ar18
|
||||
position_endstop: 0
|
||||
position_max: 135
|
||||
homing_speed: 30.0
|
||||
|
||||
[stepper_z]
|
||||
step_pin: ar29
|
||||
dir_pin: ar39
|
||||
enable_pin: !ar28
|
||||
step_distance: 0.0025
|
||||
endstop_pin: ^!ar38
|
||||
position_endstop: 0.5
|
||||
position_max: 100
|
||||
|
||||
[extruder]
|
||||
step_pin: ar55
|
||||
dir_pin: !ar56
|
||||
enable_pin: !ar54
|
||||
step_distance: 0.010638298
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.750
|
||||
heater_pin: ar4
|
||||
sensor_type: NTC 100K MGB18-104F39050L32
|
||||
sensor_pin: analog13
|
||||
control: pid
|
||||
pid_Kp: 22.2
|
||||
pid_Ki: 1.08
|
||||
pid_Kd: 114
|
||||
min_temp: 1
|
||||
max_temp: 265
|
||||
|
||||
[fan]
|
||||
pin: ar12
|
||||
|
||||
[mcu]
|
||||
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
|
||||
baud: 250000
|
||||
pin_map: arduino
|
||||
|
||||
[printer]
|
||||
kinematics: cartesian
|
||||
max_velocity: 300
|
||||
max_accel: 3000
|
||||
max_z_velocity: 5
|
||||
max_z_accel: 100
|
||||
|
||||
[display]
|
||||
lcd_type: uc1701
|
||||
cs_pin: ar41
|
||||
a0_pin: ar40
|
||||
rst_pin: ar27
|
||||
click_pin: ^!ar5
|
||||
encoder_pins: ^ar3, ^ar2
|
||||
kill_pin: ar64
|
Loading…
Reference in New Issue