From 3c526a71f9e920c3ddb9ca656a023e29a3149550 Mon Sep 17 00:00:00 2001
From: Puffy <admin@puffy.za.net>
Date: Tue, 3 Dec 2019 20:32:43 +0200
Subject: [PATCH] config: Basic config for Wanhao Duplicator i3 mini (#2238)

Signed-off-by: Grant Gordon <grant.gordon@imaginet.co.za>
---
 ...printer-wanhao-duplicator-i3-mini-2017.cfg | 77 +++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 config/printer-wanhao-duplicator-i3-mini-2017.cfg

diff --git a/config/printer-wanhao-duplicator-i3-mini-2017.cfg b/config/printer-wanhao-duplicator-i3-mini-2017.cfg
new file mode 100644
index 00000000..eb6c2569
--- /dev/null
+++ b/config/printer-wanhao-duplicator-i3-mini-2017.cfg
@@ -0,0 +1,77 @@
+# This file contains pin mappings for the Wanhao Duplicator i3 mini.
+# (circa 2017) To use this config, the firmware should be compiled
+# for the AVR atmega2560.
+# Pin numbers and other parameters were extracted from the official
+# Marlin source available at: https://github.com/garychen99/i3Mini
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_x]
+step_pin: ar22
+dir_pin: !ar23
+enable_pin: !ar57
+step_distance: 0.0125
+endstop_pin: ^!ar19
+position_endstop: 120
+position_max: 120
+homing_speed: 30.0
+
+[stepper_y]
+step_pin: ar25
+dir_pin: ar26
+enable_pin: !ar24
+step_distance: 0.0125
+endstop_pin: ^!ar18
+position_endstop: 0
+position_max: 135
+homing_speed: 30.0
+
+[stepper_z]
+step_pin: ar29
+dir_pin: ar39
+enable_pin: !ar28
+step_distance: 0.0025
+endstop_pin: ^!ar38
+position_endstop: 0.5
+position_max: 100
+
+[extruder]
+step_pin: ar55
+dir_pin: !ar56
+enable_pin: !ar54
+step_distance: 0.010638298
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: ar4
+sensor_type: NTC 100K MGB18-104F39050L32
+sensor_pin: analog13
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 1
+max_temp: 265
+
+[fan]
+pin: ar12
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+baud: 250000
+pin_map: arduino
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[display]
+lcd_type: uc1701
+cs_pin: ar41
+a0_pin: ar40
+rst_pin: ar27
+click_pin: ^!ar5
+encoder_pins: ^ar3, ^ar2
+kill_pin: ar64