We want to make sure that the system groups, once created, will always
have the GroupGroupMemberships fully set up.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Note that we use the DjangoJSONEncoder so that we have builtin support
for parsing Decimal and datetime.
During this intermediate state, the migration that creates
extra_data_json field has been run. We prepare for running the backfilling
migration that populates extra_data_json from extra_data.
This change implements double-write, which is important to keep the
state of extra data consistent. For most extra_data usage, this is
handled by the overriden `save` method on `AbstractRealmAuditLog`, where
we either generates extra_data_json using orjson.loads or
ast.literal_eval.
While backfilling ensures that old realm audit log entries have
extra_data_json populated, double-write ensures that any new entries
generated will also have extra_data_json set. So that we can then safely
rename extra_data_json to extra_data while ensuring the non-nullable
invariant.
For completeness, we additionally set RealmAuditLog.NEW_VALUE for
the USER_FULL_NAME_CHANGED event. This cannot be handled with the
overridden `save`.
This addresses: https://github.com/zulip/zulip/pull/23116#discussion_r1040277795
Note that extra_data_json at this point is not used yet. So the test
cases do not need to switch to testing extra_data_json. This is later
done after we rename extra_data_json to extra_data.
Double-write for the remote server audit logs is special, because we only
get the dumped bytes from an external source. Luckily, none of the
payload carries extra_data that is not generated using orjson.dumps for
audit logs of event types in SYNC_BILLING_EVENTS. This can be verified
by looking at:
`git grep -A 6 -E "event_type=.*(USER_CREATED|USER_ACTIVATED|USER_DEACTIVATED|USER_REACTIVATED|USER_ROLE_CHANGED|REALM_DEACTIVATED|REALM_REACTIVATED)"`
Therefore, we just need to populate extra_data_json doing an
orjson.loads call after a None-check.
Co-authored-by: Zixuan James Li <p359101898@gmail.com>
This in-progress feature was started in 2018 and hasn't
been worked on much since. It's already in a broken state,
which makes it hard to iterate on the existing search bar
since it's hard to know how those changes will affect search
pills.
We do still want to add search pills eventually, and when
we work on that, we can refer to this diff to readd the
changes back.
An implicit coercion from an untyped dict to the TypedDict was hiding
a type error: CapturedQuery.sql was really str, not bytes. We should
always prefer dataclass over TypedDict to prevent such errors.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This adds support to accepting extra_data being dict from remote
servers' RealmAuditLog entries. So that it is forward-compatible with
servers that have migrated to use JSONField for RealmAuditLog just in
case. This prepares us for migrating zilencer's audit log models to use
JSONField for extra_data.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This prepares for the audit log migration which requires us to populate
a JSONField from the extra_data field. "data" is not representative of
the actual extra_data field for RealmAuditLog entries of event types
in SYNC_BILLING_EVENTS.
We intentionally leave the test cases unchanged without bothering to
verify if the extra_data arrives as-is to keep this change minimal.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
It turns out that for some some deployments, there exists a second,
duplicate, foreign key constraint for user_profile_id. The logic below
would try to rename both to the same name, which would fail on the
second:
```
psycopg2.errors.DuplicateObject: constraint "zerver_userpresenceo_user_profile_id_d75366d6_fk_zerver_us" for relation "zerver_userpresence" already exists
```
Eliminate the duplicate constraint, rather than attempting to rename
it. Also add a block, in case of future reuse of this pattern, which
caveats that this approach will not work in the presence of
explicitly-named indexes. UserPresence happens to not have any, so
this technique is safe in this instance.
Co-authored-by: Alex Vandiver <alexmv@zulip.com>
Before this commit our docs mentioned `string[]` data type for
`submessages` field on the `message` object. This commit changes the
type to `object[]` and correctly mentions all fields of the `submessage`
object.
This code clearly meant to return host and returning realm.host is a
mistake. realm.host is not accessible in a migration due to being a
@property-decorated method. The code constructs the host var value just
above this line.
Revises the API changelog entry for feature level 161 to document
the changes to `DELETE /users/me/subscriptions` and to explain
more clearly what the new `can_remove_subscribers_group_id`
parameter does.
Updates the feature level 161 changes notes and related descriptions
to include links and also more clearly explain the updates.
Also, updates the `GET /user_groups` example to better reflect what
is returned for system groups since this is now referenced in the
`can_remove_subscribers_group_id` parameter description.
The original API feature level 161 API documentation changes were
made in commit c3759814be and commit 73f11853ec.
Updates the scheduled_message_id parameter for deleting scheduled
messages to use the to_non_negative_int converter function for
validation, which is used in other endpoints/views with an ID in
the request path.
This commit adds the missing 'UNMUTED' visibility policy
to the documentation for 'api/get-events' and 'api/register-queue'.
It replaces INHERIT with NONE for a clearer name
in the 'api/update-user-topic' documentation.
Other smaller changes in wording to improve readability.
Twitter removed their v1 API. We take care to keep the existing cached
results around for now, and to not poison that cache, since we might
be able replace this with something that can still use the existing
cache.
Part of splitting creating and editing scheduled messages.
Final commit. Should be merged with previous commits in series.
Updates the API documentation for the new endpoint for editing
scheduled messages.
Part of splitting creating and editing scheduled messages.
Should be merged with final commit in series. Breaks tests.
Splits out editing an existing scheduled message into a new
view function and updated `edit_scheduled_message` function.
Part of splitting creating and editing scheduled messages.
Should be merged with final commit in series. Breaks tests.
Removes `scheduled_message_id` parameter from the create scheduled
message path.
Prep commit for splitting create/edit endpoint for scheduled
messages.
Because of `test-api` runs the tests in alphabetical order based on
the `operationId`, we need two scheduled messages in the test database.
The first for the curl example delete (delete-scheduled-message) and
the second for the curl example update (update-scheduled-message).
Adds API changelog feature level 1 and associated Changes notes
for when the `stream_id` parameter in the `PATCH /messages/message_id`
was added, and for when the `prev_stream` field was added to edit
history information for messages.
We're adding these to the Zulip 3.0 feature level 1 because
commit 843345dfee that introduced this field and this parameter
to the server / backend code was merged before the commit that added
the API feature level tracking, commit e3b90a5ec8, at level 1.
Updates the descriptions of the `avatar_url` field in message and
user objects to be clear that the current user must have access
to the other user's real email address in order for the value to
ever be `null`.
Also adds a bullet point to the API changelog feature level 163
entry about this change.
Clarifies additional areas of the API documentation where a user's
email is mentioned / used where it could be useful to clarify
that the email in question is the "Zulip API email".
This commit removes realm_community_topic_editing_limit_seconds
field from register response since topic edit limit is now
controlled by move_messages_within_streams_limit_seconds
setting.
We also remove DEFAULT_COMMUNITY_TOPIC_EDITING_LIMIT_SECONDS
constant since it is no longer used.
In the register response properties deprecated at feature level 89,
update the descriptions to link to the client_capabilities parameter
when referenced.
Also, moves the enter_send property to be in the same section of the
register response as other properties deprecated at this feature level.
These descriptions were originally added to these properties in
commit e6f828a8e2.
As the relevant comment elaborates - what happens next in the test in
simulating the step that happens in the desktop app. Thus a new session
needs to be used. Otherwise, the old session created normally in the
browser pollutes the state and can give falsely passing tests.
This should be happening for all social auth tests using this, not just
in that one SAML test, thus moving it inside the helper method.
This is a useful improvement in general for making correct
LogoutRequests to Idps and a necessary one to make SP-initiated logout
fully work properly in the desktop application. During desktop auth
flow, the user goes through the browser, where they log in through their
IdP. This gives them a logged in browser session at the IdP. However,
SAML SP-initiated logout is fully conducted within the desktop
application. This means that proper information needs to be given to the
the IdP in the LogoutRequest to let it associate the LogoutRequest with
that logged in session that was established in the browser. SessionIndex
is exactly the tool for that in the SAML spec.
This gives more flexibility on a server with multiple organizations and
SAML IdPs. Such a server can have some organizations handled by IdPs
with SLO set up, and some without it set up. In such a scenario, having
a generic True/False server-wide setting is insufficient and instead
being able to specify the IdPs/orgs for SLO is needed.
Closes#20084
This is the flow that this implements:
1. A logged-in user clicks "Logout".
2. If they didn't auth via SAML, just do normal logout. Otherwise:
3. Form a LogoutRequest and redirect the user to
https://idp.example.com/slo-endpoint?SAMLRequest=<LogoutRequest here>
4. The IdP validates the LogoutRequest, terminates its own user session
and redirects the user to
https://thezuliporg.example.com/complete/saml/?SAMLRequest=<LogoutResponse>
with the appropriate LogoutResponse. In case of failure, the
LogoutResponse is expected to express that.
5. Zulip validates the LogoutResponse and if the response is a success
response, it executes the regular Zulip logout and the full flow is
finished.
Expands the main description for the `/update-message` documentation
to include a list of the realm settings in the API that are relevant
to when users can update a message's content, topic or stream.
Adjusts the descriptions of realm_linkifiers (and deprecated
realm_filters) events and register response fields so that the
description of the current API is complete without the feature
level 176 **Changes** notes.
Adds examples of the regex pattern and old URL string format to
the deprecated `realm_filters` event and register response field.
The examples are in the prose description since the events are
no longer sent and therefore no longer tested.
Revises API changelog entry for missing endpoint method and to
clarify the overall text.
Updates Changes notes for feature level 176 to not have repetitive
text, so that the updates were clearer and more concise.
The original commit with the changes related to this API changelog
entry is commit 268f858f39.
This commit updates the API to check the permission to subscribe other
users while inviting. The API will error if the user passes the
"stream_ids" parameter (even when it contains only default streams)
and the calling user does not having permission to subscribe others to
streams.
For users who do not have permission to subscribe others, the
invitee will be subscribed to default streams at the time of
accepting the invite.
There is no change for multiuse invites, since only admins are allowed
to send them, and admins always have the permission to subscribe
others to streams.
Since 74dd21c8fa in Zulip Server 2.1.0, if:
- ZulipLDAPAuthBackend and an external authentication backend (any aside
of ZulipLDAPAuthBackend and EmailAuthBackend) are the only ones
enabled in AUTHENTICATION_BACKENDS in /etc/zulip/settings.py
- The organization permissions don't require invitations to join
...then an attacker can create a new account in the organization with
an arbitrary email address in their control that's not in the
organization's LDAP directory.
The impact is limited to installations which have the specific
combination of authentication backends described above, in addition to
having the "Invitations are required for joining this organization
organization" permission disabled.
This argument was added with the default incorrectly set to `True` in
bb0eb76bf3 - despite
`maybe_send_to_registration` only ever being called in production code
in a single place, with `password_required=False` explicitly. And then
it just got carried forward through refactors.
`maybe_send_to_registration` was/is also called twice in tests, falling
back to the default, but the `password_required` value is irrelevant to
the tests - and if anything letting it use the `True` has been wrong,
due to not matching how this function is actually used.
This prevents `get_user_profile_by_api_key` from doing a sequential
scan.
Doing this requires moving the generation of initial api_key values
into the column definition, so that even bare calls to
`UserProfile.objects.create` (e.g. from tests) call appropriately
generate a random initial value.
Adds an API changelog note to 2.1 for the addition of
realm_default_external_accounts to the `/register-queue` response.
Also adds a Changes note to the field in the endpoint's response
API documentation.
The original commit that added it to that endpoint's response was
commit d7ee2aced1.
The default for Javascript reporting is that Sentry sets the IP
address of the user to the IP address that the report was observed to
come from[^1]. Since all reports come through the Zulip server, this
results in all reports being "from" one IP address, thus undercounting
the number of affected unauthenticated users, and making it difficult
to correlate Sentry reports with server logs.
Consume the Sentry Envelope format[^2] to inject the submitting
client's observed IP address, when possible. This ensures that Sentry
reports contain the same IP address that Zulip's server logs do.
[^1]: https://docs.sentry.io/platforms/python/guides/logging/enriching-events/identify-user/
[^2]: https://develop.sentry.dev/sdk/envelopes/
Updates the descriptions and examples for there only being two key
values: "website" and "aggregated".
Also, clarifies that email keys are the Zulip display email.
And removes any descriptive text that says presence objects have
information about the clients the user is logged into.
Deleting a message can race with sending a push notification for it.
b47535d8bb handled the case where the Message row has gone away --
but in such cases, it is also possible for `access_message` to
succeed, but for the save of `user_message.flags` to fail, because the
UserMessage row has been deleted by then.
Take a lock on the Message row over the accesses of, and updates to,
the relevant UserMessage row. This guarantees that the
message's (non-)existence is consistent across that transaction.
Partial fix for #16502.
As of commit 38f6807af1, we accept only stream and user IDs for
the recipient information for scheduled messages, which means we
can simplify the type for `message_to` in `check_schedule_message`.
In commit 38f6807af1, we updated the `POST /scheduled_messages`
endpoint to only accept user IDs for direct messages. The endpoint
alread only accepted a stream ID for stream messages.
But the API documentation was not updated for the errors returned
when either a stream or user with the specified ID does not exist.
Updates the API documentation for the correct error responses.
Realm exports may OOM on deployments with low memory; to ensure
forward progress, log the start time in the RealmAuditLog entry, and
key off of the existence of that to prevent re-attempting an export
which was already tried once.
We previously hard-coded 6 threads for the realm export; in low-memory
environments, spawning 6 threads for an export can lean to an OOM,
which kills the process and leaves a partial export on disk -- which
is then tried again, since the export was never completed. This leads
to excessive disk consumption and brief repeated outages of all other
workers, until the failing export job is manually de-queued somehow.
Lower the export to only use on thread if it is already running in a
multi-threaded environment. Note that this does not guarantee forward
progress, it merely makes it more likely that exports will succeed in
low-memory deployments.
This makes it less likely we will accidentally fail to include a class
if the subclassing of QueueProcessingWorker changes, and lets mypy
more accurately understand the typing.
We now allow users to change email address visibility setting
on the "Terms of service" page during first login. This page is
not shown for users creating account using normal registration
process, but is useful for imported users and users created
through API, LDAP, SCIM and management commands.
We now set tos_version to "-1" for imported users and the ones
created using API or using other methods like LDAP, SCIM and
management commands. This value will help us to allow users to
change email address visibility setting during first login.
For cases of `name=value` in descriptions in the API documentation,
update to either use JSON style of `"name": value` when correct or
revise the descriptive text.
Creates a custom linter rule for `zerver/openapi/zulip.yaml` to
only allow lowercase versions of "true", "false" and "null".
Updates existing documentation for new rules.
With the private messages -> direct messages migration, we should
rename the "Starting a new private thread" help center article.
- Renames article to "Starting a new direct message"
- Updates relevant section in /help/getting-started-with-zulip
- Fixes typo in /help/send-group-dm
- Updates file names and adds URL redirect.
Fixes#25506.
Backfill subscription realm audit log SUBSCRIPTION_CREATED events for
users which are currently subscribed but don't have any subscription
events, presumably due to some historical bug. This is important
because those rows are necessary when reactivating a user who is
currently soft-deactivated.
For each stream, we find the subscribed users who have no
subscription-related realm audit log entries, and create a
`backfill=True` subscription audit log entry which is the latest it
could have been, based on UserMessage rows. We then optionally insert
a `DEACTIVATION` if the current subscription is not active.
Earlier when a user who is not allowed to add subscribers to a
stream because of realm level setting "Who can add users to streams"
is subscribing other users while creating a new stream than new stream
was created but no one is subscribed to stream.
To fix this issue this commit makes changes in the API used
for adding subscriptions. Now stream will be created only when user
has permissions to add other users.
With a rewrite of the test by Tim Abbott.
The immediate application of this will be for SAML SP-initiated logout,
where information about which IdP was used for authenticating the
session needs to be accessed. Aside of that, this seems like generally
valuable session information to keep that other features may benefit
from in the future.
This is nicer that .pop()ing specified keys - e.g. we no longer will
have to update this chunk of code whenever adding a new key to
ExternalAuthDataDict.
Adds the `failed` boolean from the ScheduledMessage to the API dict
returned by scheduled message events and register response, and by
fetching the user's scheduled messages.
`failed` will only be true when the server has tried to send the
scheduled message and failed due to an error.
In the case of a user editing a scheduled message that the server
had failed to send at the scheduled time due to an error, we want
to update the `failed` and `failure_message` fields as the intent
is for the server to retry to send the scheduled message based on
the updated information provided by the user.
In the case that there is an error when sending a scheduled message,
we now send a message from the notification bot to the user who
scheduled the message about the failure/error.
The notification message is not sent if the error when sending the
scheduled message was due to the realm or sender being deactivated.
This commit adds a new test to check how the visibility policy updates
when moving messages to a topic that didn't exist previously.
This test also helps us adding coverage for the code which just
skips setting visibility_policy if there is no need to update the
value because both previous and new value of visibility policy
is INHERIT. The "actions/message_edit.py" file has 100% coverage
now and thus is removed from "not_yet_fully_covered" list.
The code for updating visibility policy values on moving messages
had two bugs.
- There was a typo in elif condition where "user_profile" was being
used instead of "user_profile_with_policy".
This commit fixes the typo.
- It was assumed that there would be no UserTopic rows for target
topic if the target topic didn't exist. But there can be such case
where some messages were sent to that topic and the user muted
the topic. But then the messages in that topic was deleted. In
such case there can be UserTopic rows for a stream-topic pair
that does not exist.
This commit fixes the code to handle such case as well and set
the visibility policy of new topic to what was set for the original
topic. This change simplifies the condition to just check whether
new_visibility_policy is equal to target_topic_visibility_policy
and skip if so, and update the visibility policy otherwise.
Due to this change, we now do not try to mute the already muted
topic if the topic is moved to a topic which didn't exist
previously and thus we modify the existing test to not expect
any INFO logs.
This commit adds tests to cover the case of message editing
not allowed due to allow_message_editing set to False and
the case when there is no limit set when moving all messages
in a topic.
The "actions/message_edit.py" file does not have 100% coverage
still and it will be addressed in the next commit.
We do not pass "email_address_visibility" to do_create_realm
anymore. It was passed before to set the setting for realms in
development database, but it has been changed since we changed
email_address_visibility to be a user-level setting instead
of realm-level setting since now it is set on RealmUserDefault
table.
Adds test coverage for the error sent for editing a scheduled
message that was successfully sent.
`zerver/actions/scheduled_messages.py` now has 100% test coverage
again.
We were missing a few checks for raw_unread_msgs being present before
trying to parse and update it.
The test only covers 2/3 of the cases, but I wasn't convinced it was
worth adding another test just for the corner case of removing a
message flag; this seems fairly unlikely to regress.
We now allow users to invite without specifying any stream to join.
In such cases, the user would join the default streams, if any, during
the process of account creation after accepting the invite.
It is also fine if there are no default streams and user isn't
subscribed to any stream initially.
We do not add user to the default streams if the streams list passed
while sending the invite (both email and multi-use) was empty since
invite explicitly selected to not subscribe the user to default
streams.
Previously, it seemed possible for the scheduled messages API to try
to send infinite copies of a message if we had the very poor luck of a
persistent failure happening after a message was sent.
The failure_message field supports being able to display what happened
in the scheduled messages modal, though that's not exposed to the API
yet.
The previous logic would attempt to send a large number of unrelated
messages in a single transaction, which is just asking for trouble in
the event that one of the attempts fails.
For scheduled stream messages, we already limited the `to`
parameter to be the stream ID, but here we return a JsonableError
in the case of a ValueError when the passed value is not an integer.
For scheduled direct messages, we limit the list for the `to`
parameter to be user IDs. Previously, we accepted emails like
we do when sending messages.
Test coverage for `zerver/actions/message_delete.py`.
Both callers of this function would already return if there were
no Messages specified to delete, which is why existing tests did
not cover this.
Doing so causes the "username resolved this topic" or "this topic was
moved by username" notifications to be attributed to a random user who
had a visibility policy on the topic.
The comment was outdated, currently we import UserProfiles before
realm_tables - because some models in realm_tables have a dependency on
UserProfile.
Also makes sense to elaborate a bit more in the comment that it's just
an outline of the ordering, not an exhaustive list.
Fixes#25414.
We add Attachment.scheduled_messages relation to track ScheduledMessages
which reference the attachment.
The import bits can be done after merging this, by updating #25345.
This was doing bulk_create in a loop for each realm, which is too slow
on very large servers. Just do a single bulk_create with a reasonable
batch_size at the end.
Because education organizations and users have slightly specialized
use cases, we update the Welcome Bot message content sent to new
users and new organization owners for these types of organizations
to link to help center articles/guides geared toward these users
and organizations.
Also, updates the demo organization warning to only go to the new
demo organization owner because the 30 day deletion text is only
definitely accurate when the organization is created.
Fixes#21694.
In commit fc58c35c0, we added a check in various emails for the
settings.CORPORATE_ENABLED value, but that context is only always
included for views/templates with a request.
Here we add that to common_context, which is often used when there
is not a request (like with emails). And we manually add it to the
email context in various cases when there is not a user account to
call with common_context: new user invitations, registration emails,
and realm reactivation emails.
Adds API changelog update for the new endpoint added for creating
or editing scheduled messages, for the events sent for scheduled
messages (add, update, delete), and for the `scheduled_messages`
field in the register response.
Adds a specific API markdown documentation file for the create
or update scheduled messages endpoint, so that the parameters in
the cURL examples are accurate for the type of message (direct or
stream) and action (create or edit).
Bumps the API feature level, adds Changes notes to API documentation
and adds the scheduled message endpoints to the API documentation
sidebar.
Prep commit for adding the scheduled-message endpoints to the API
documentation.
Adds a scheduled message for Iago in the test database so that it
can be deleted in the delete cURL example in the api-test suite.
This will help us remove scheduled message and reminder logic
from `/messages` code path.
Removes `deliver_at`/`defer_until` and `tz_guess` parameters. And
adds the `scheduled_delivery_timestamp` instead. Also updates the
scheduled message dicts to return `scheduled_delivery_timestamp`.
Also, revises some text in `/delete-scheduled-message` endpoint
and in the `ScheduledMessage` schema in the API documentation.
Updates the objects in the API for scheduled messages so that those
for stream messages return the `to` property as an integer since it
is always the unique stream ID and so that those for direct messages
do not have a `topic` property since direct messages never have a
topic.
Also makes small update so that web app scheduled messages overlay
has the correct stream ID.
This was previously called delete_event_notify_user_ids, which seemed
to narrow its purpose in a way that was confusing given that it's also
used for other calculations.
Further, calculate it as soon as we know it, not when we're first
going to use it.
Previously, entering an organization via 'accounts/go' with the
web-public stream enabled took the user to the web-public view
even if the user was not logged in.
Now, a user is always redirected to the 'login_page' with
the next parameter, if present.
The 'login_page' view is updated to redirect an authenticated
user based on the 'next' parameter instead of always redirecting
to 'realm.uri'.
Fixes#23344.
The "Resend" link for realm creation was not working correctly
because it is implemented by basically submiting the registration
form again which results in resending the email but all the
required parameters were not passed to the form after recent
changes in the realm creation flow.
This commit fixes it by passing all the required parameters -
email, realm name, realm type and realm subdomain, when submitting
form again by clicking on the "resend" link.
Fixes#25249.
This commit adds ORG_TYPE_IDS constant field to Realm class
such that it can be used when we want to validate the org_type
passed in request. This was previously defined in realm.py, but
we move it inside Realm class such that we can use it at other
places as well.
This commit places the email CSS into the `style` tag located in the
`head` section. This resolves the issue of being unable to apply
certain CSS styles that cannot be inlined, such as media queries and
pseudo-classes.
In #23380 we want to replace all occurrences of `uri` with `url`.
This commit replaces the occurrences appeared in a variable name
`tornado_uri` and a function name `get_tornado_uri`.
In #23380 we want to change all occurrences of `uri` with `url`.
This commit changes the occurrences in a context key `api_uri_context`
and a function name `add_api_uri_context`.
In #23380 we want to change all occurrences of `uri` with `url`.
This commit changes the names of two variables `external_uri_scheme`
and `main_site_uri`, who are constructed using `settings` constants.
In #23380 we want to change all ocurrences of `uri` to `url`. This
commit changes the ocurrences of `uri` appeared in files related to
email, including templates (`.html`, `.txt`) and backend (`.py`)
codes.
In `email.md`, `base_images_uri` is changed to `images_base_url` -
the words `base` and `images` are swapped and plural form is added
for `image`. This is becasue the former is not found anywhere in
the codebase while the later appears a lot. To reduce confusion,
this doccumentation changed accordingly.
Adds CSS formatting for `invalid_email.html`.
Uses the `white-box` style because this page is a redirect when
there is an error with the email the user provided during
registration.
Also, updates the text of this page for some grammar errors and
to clarify the language between an invalid email and an email that
is not allowed by the Zulip organization in question.
Finally, makes any references to the `realm_name` also link to
the Zulip organization with the `realm_uri`.
Adds CSS formatting for `no_spare_licenses.html`.
Uses the `white-box` style because this page is a redirect when
a user tries to register for a Zulip Cloud organization that does
not have any available licenses for new users.
Updates reference to `realm_name` to be a link to the `realm_uri`.
This also removes the error in one of these functions that was using a
different constant instead of
PRESENCE_LEGACY_EVENT_OFFSET_FOR_ACTIVITY_SECONDS.
This implements the core of the rewrite described in:
For the backend data model for UserPresence to one that supports much
more efficient queries and is more correct around handling of multiple
clients. The main loss of functionality is that we no longer track
which Client sent presence data (so we will no longer be able to say
using UserPresence "the user was last online on their desktop 15
minutes ago, but was online with their phone 3 minutes ago"). If we
consider that information important for the occasional investigation
query, we have can construct that answer data via UserActivity
already. It's not worth making Presence much more expensive/complex
to support it.
For slim_presence clients, this sends the same data format we sent
before, albeit with less complexity involved in constructing it. Note
that we at present will always send both last_active_time and
last_connected_time; we may revisit that in the future.
This commit doesn't include the finalizing migration, which drops the
UserPresenceOld table.
The way to deploy is to start the backfill migration with the server
down and then start the server *without* the user_presence queue worker,
to let the migration finish without having new data interfering with it.
Once the migration is done, the queue worker can be started, leading to
the presence data catching up to the current state as the queue worker
goes over the queued up events and updating the UserPresence table.
Co-authored-by: Mateusz Mandera <mateusz.mandera@zulip.com>
The migration to css-inline "fixed" the fact that styles from this
file previously were never applied to the internals of missed-message
emails.
Rewrite much of the CSS to more correctly scope to apply to the
appropriate elements, and document with comments the purpose of most
blocks.
Co-authored-by: Tim Abbott <tabbott@zulip.com>
Documents narrows now have support for new filters for direct messages:
`is:dm`, `dm`, and `dm-including`. Also documents that `is:private`,
`pm-with` and `group-pm-with` are now legacy aliases for these three
new filters respectively.
Note that API documentation references the help center documentation
for search/narrow filters.
Fixes#24806.
In a previous commit, the frontend of the web app was updated for
URLs with `#narrow/dm/...` for direct messages (group and 1-on-1).
Updates the URLs generated for email notifications and outgoing
webhook notification messages to use the new `/dm/...` format.
Adds backend support for `dm-including` operator. This will
deprecate the `group-pm-with` operator, but we keep support
for backwards-compatibility.
For testing updates, because the messages returned by these
two operators are different, most of the tests for `group-pm-with`
remain unchanged, but added comments about deprecated state.
Also, cleans up remaining instance of "PM" in `narrow.py` to
be "DM".
The general API changelog and documentation updates will be done
in a final commit in the series of commits that adds support for
the various new direct message narrows.
Adds backend support for `dm` operator. This will deprecate the
`pm-with` operator, but we keep support for backwards-compatibility.
For testing updates, updates the existing tests for `pm-with` to
use `dm`, and adds one basic test for `pm-with` in the `add_term`
tests as the two operators refer to the same `by_*` method.
The general API changelog and documentation updates will be done
in a final commit in the series of commits that adds support for
the various new direct message narrows.
Adds backend support for `is` operator with the `dm` operand. This
will deprecate the `is` operator with the `private` operand, but we
keep support for backwards-compatibility.
Note that there is some clean up of references to private messages
in the updated backend test. In commit 43ec7ed, the documentation
for `build_narrow_filter` wasn't updated for the rename of
`BuildNarrowFilterTest` to `NarrowLibraryTest`, so that's also
corrected in these changes.
The general API changelog and documentation updates will be done
in a final commit in the series of commits that adds support for
the various new direct message narrows.
This commit changes the assignee info to the correct one.
Earlier, the current assignee info of the issue was used
to create the message but when an issue was unassigned
this would give incorrect information if there are still
assignees left on the issue. Now, it uses the details of
the user who has been unassigned from the issue.
This commit removes the description from the Issue Assigned
event message that is sent by the Github Integration.
Previously when an issue was assigned, the message also had the
description of the issue, which is redundant as the description
has been already sent through the issue created event. After
this commit, the description no longer appears in the message.
Fixes#24554
Updates areas in the API documentation that reference the maximum
length of a stream message topic to note the `max_topic_length`.
Updates areas in the API documentation that reference the maximum
length of a stream name to note the `max_stream_name_length` and
areas that reference the maximum length of a stream description to
note the `max_stream_description_length`.
All of these maximum values are sent by the `POST /register`
response.
This removes the validator argument for 0423_realmfilter_url_template,
which do not really alter the database schema. It otherwise fails
the migration because the filter_format_validator function is removed.
Migration 0094_realm_filter_url_validator is modified because we can no
longer refer to filter_format_validator.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This is mainly updating the variable names and relevant docstrings
without actual change to the behavior of the command.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This swaps out url_format_string from all of our APIs and replaces it
with url_template. Note that the documentation changes in the following
commits will be squashed with this commit.
We change the "url_format" key to "url_template" for the
realm_linkifiers events in event_schema, along with updating
LinkifierDict. "url_template" is the name chosen to normalize
mixed usages of "url_format_string" and "url_format" throughout
the backend.
The markdown processor is updated to stop handling the format string
interpolation and delegate the task template expansion to the uri_template
library instead.
This change affects many test cases. We mostly just replace "%(name)s"
with "{name}", "url_format_string" with "url_template" to make sure that
they still pass. There are some test cases dedicated for testing "%"
escaping, which aren't relevant anymore and are subject to removal.
But for now we keep most of them as-is, and make sure that "%" is always
escaped since we do not use it for variable substitution any more.
Since url_format_string is not populated anymore, a migration is created
to remove this field entirely, and make url_template non-nullable since
we will always populate it. Note that it is possible to have
url_template being null after migration 0422 and before 0424, but
in practice, url_template will not be None after backfilling and the
backend now is always setting url_template.
With the removal of url_format_string, RealmFilter model will now be cleaned
with URL template checks, and the old checks for escapes are removed.
We also modified RealmFilter.clean to skip the validation when the
url_template is invalid. This avoids raising mulitple ValidationError's
when calling full_clean on a linkifier. But we might eventually want to
have a more centric approach to data validation instead of having
the same validation in both the clean method and the validator.
Fixes#23124.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This is implemented by replacing all matches of "%(var_name)s" in a URL
format string with "{var_name}". Since we do want to ensure that the
templates aren't broken after this migration, a RuntimeError is raised
to let the maintainer know that certain linkifier cannot be converted
automatically if it does not pass the uri_template.validate check.
Also, we need to escape "%%", which is used to represent "%" in the old
format string syntax, as well as "{" and "}", which is a part of the
URL template syntax.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This will later be used to expand matching linkifier patterns.
Making it nullable for now, but we will make it required in
the APIs.
As a part of this transition, we temporarily make url_format_string
nullable as well, which will be later removed. This allows us to
switch to populating url_template without caring about passing
url_format_string.
Note that the validators are imported in the migration because Django
otherwise diffs it and considers the schema to be different, generating
a migration, failing the "tools/test-migrations" test.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
208c0c3034 fixed this for new deleted users, but left existing users
with potentially invalid email addresses. This is problematic if the
realm is ever exported and re-imported, as the addresses will not
validate.
Add a migration which attempts to fix these invalid email addresses.
This commit updates the logic for migrating user_topic rows
during the move-messages operation when the target topic
already has messages.
Previously, the target_topic's visibility_policy was simply
set to the original_topic's visibility_policy,
and the original_topic's visibility_policy was set to INHERIT.
This commit updates the move-messages code path to determine
the new visibility_policy depending on the visibility policies
of the original and target topics.
The target_topic's visibility_policy is then updated.
The number of db queries has increased by two:
One query corresponds to determining if 'target_topic_has_messages'.
Another query corresponds to 'get_users_with_user_topic_visibility_policy'
to determine 'target_topic_user_profile_to_visibility_policy'.
This prep commit updates the lib function
'topic_has_visibility_policy' to add support for the case
when visibility_policy=INHERIT.
Previously, it had support for all the visibility policies
except INHERIT.
This commit refactors the move user_topic records
code block in 'do_update_message', resulting in
clean code.
We directly iterate over the dictionary items
instead of looping over the keys and fetching
values if the key exists.
Moves jwt_fetch_api_key endpoint to v1_api_mobile_patterns so
that tools/test-api detects it as an API endpoint that is pending
documentation.
Fixes#24982.
For endpoints with a `type` parameter to indicate whether the message
is a stream or direct message, `POST /typing` and `POST /messages`,
adds support for passing "direct" as the preferred value for direct
messages, group and 1-on-1.
Maintains support for "private" as a deprecated value to indicate
direct messages.
Fixes#24960.
Refactors instances of `message_type_name` and `message_type`
that are referring to API message type value ("stream" or
"private") to use `recipient_type_name` instead.
Prep commit for adding "direct" as a value for endpoints with a
`type` parameter to indicate whether the message is a stream or
direct message.
So far, we've used the BitField .authentication_methods on Realm
for tracking which backends are enabled for an organization. This
however made it a pain to add new backends (requiring altering the
column and a migration - particularly troublesome if someone wanted to
create their own custom auth backend for their server).
Instead this will be tracked through the existence of the appropriate
rows in the RealmAuthenticationMethods table.
If the ID of the scheduled message is passed by the client, we
edit the existing scheduled message instead of creating a new one.
However, this will soon be moved into its own API endpoint.
Tim Abbott
Zixuan James Li
Prakhar Pratyush
Zixuan Li
evykassirer
Anders Kaseorg
Mateusz Mandera
Lalit
dhruv302003
Lauryn Menard
rht
sbansal1999
Sahil Batra
Alya Abbott
Alex Vandiver
David Rosa
Aman Agrawal
Ujjawal Modi
Daniil Fadeev
AcKindle3
Tanmay Munjal
Joelute
Ruchir Harbhajanka