The `replying_to_message` field was used in some
early versions of compose fade, but it has no more
use in the current code.
The drafts implementation didn't really make any sense,
anyway, as we were claiming to reply to the same
message we were drafting.
A common source of confusion for new users is sending a message when
you're scrolled up in the message feed; in this case, it's nice to
communicate to the user why the message is not in view.
Fixes#10792.
Restructured by tabbott to replace overly complex logic for getting
the position of the new message with a `message_list.get_row()` call.
Now, we correctly avoid calling various password quality/strength
functions in the registration flow in the event that there isn't a
password form on the current page.
Before, some code wasn't inside a block at all, while other code was
using an incorrect check (an empty jQuery object is not falsey).
The overall result was that this would often crash on certain
pages/flows, stopping JS execution and causing various secondary
problems.
The first bug fixed here has been around for a long
time--we were redundantly updating unread counts
indirectly via muting_ui.initialize(). The
unread counts also get updated in
unread_ui.initialize(), when we have more valid
state. (And it's worth noting here that the unread
counts get updated yet again once message fetches
complete.)
The second bug was a very recent regression from
my recent stream name -> stream id cleanup in the
muting system. We now depend on stream_data to
initialize muting data, so we need to initialize
muting.js slightly later in the process.
These fixes are intertwined, because they were both
somewhat caused by the anti-pattern of having
muting_ui.js initialize unread_ui.js and muting.js,
instead of doing more direct, fine-grained initialization
from ui_init.js.
Essentially we replace this code:
exports.update_muted_topics = function (muted_topics) {
muting.set_muted_topics(muted_topics);
unread_ui.update_unread_counts();
};
with this:
exports.initialize = function () {
exports.set_muted_topics(page_params.muted_topics);
};
And the modules load like this:
stream_data
...
muting
...
unread_ui
And we don't need any page-load initialization for muting_ui,
which is mostly used for Settings/Muted topics.
This function used to be called initialize_from_page_params(),
and we called it indirectly through `subs.js`.
Now we call it directly from `ui_init.js`, which gives us a
bit more control over how things are initialized. In fact,
this sets us up for the next commit, where I fix a recent
regression I introduced.
The data attribute here has some value if you're
inspecting the HTML in the browser, but it's not
worth the extra code.
All the list items have data-stream-id, so there's
no need for the parent to have it.
The stream_list test that was fixed here was sort of
broken. It accomplished the main goal of verifying
what gets rendered, but now the data setup part is
more like the actual app code (and simpler, too).
This fixes the most core data structures inside of
muting.js. We still use stream names for incoming
data to set_muted_topics and outgoing data from
get_muted_topics.
This will make us more resilient to stream name changes.
Before, if you were logged on when a stream rename
occured, topics that were muted under that stream would
appear to be unmuted. (You could fix it with a reload,
but it can be jarring to have a bunch of unread messages
appear in your feed suddenly.)
Fixes#11033
The fixture changes are because self.upgrade formerly used to cause a page load
of /billing, which in turn calls Customer.retrieve.
If we ran the full test suite with GENERATE_STRIPE_FIXTURES=True, we would
likely see several more Customer.retrieve.N.json's being deleted. But
keeping them there for now to keep the diff small.
Like the other similar commits, we were doing the same work in all
code paths, just with a much more error-prone approach.
We can also now remove the now-unused finish_initial_narrow function.
Like the other commits in this series, we were already doing this in
all of the callers of load_messages; this centralizes that logic in a
less ad-hoc feeling way.
We no longer use or need the start_initial_narrow function.
Previously, each individual caller of load_messages that passed
num_before > 0 would do its own manual management of fetch_status;
now, we just do it inside load_messages.
Apparently, the older side of the FetchStatus object for home_msg_list
was incorrectly not being maintained. We got away with this, because
the do_backfill code path (which runs after we're done with the
load_more cycle) will correct the error for found_oldest. But we
didn't have proper handling for history_limited here.
When we're doing the load_more frontfill, we were not correctly
declaring that we were in the process of doing a fetch. Because the
next load_more call clears this state anyway, this was generally a
short race, off-screen, but it is still a data flow bug.
See the upcoming commits for a refactor that will eliminate the
possibility of this sort of bug.
When a user's name is edited, currently we still show the old name is
mentions (though clicking on the item does the right thing).
However, at present, it creates a new problem in search results, where
the highlighting is removed by this substitution.
This styles the avatar and username that show when the registering
user is importing their settings from an existing Zulip account.
Tweaked by tabbott to fix the test/linter failures, a bit of styling,
and tag strings for translation.
A bug caused background links to open even when a modal in the user
settings overlay was active in the foreground. This commit fixes this
by disabling mouse events for the background when the modal is active,
and restoring them as soon as the modal starts closing.
Fixes#10654.
This adds a line to static/js/hotkey.js for focusing the "Close"
button. Tweaked by tabbott to make more clear that we don't expect
there to ever be both a close button and a save button, since in that
case this code would be busted.
Fixes: #3830.
The stream/topic edit areas now have these ids:
#stream_message_recipient_stream
#stream_message_recipient_topic
They are pretty verbose, but being able to grep
for these without noise does have some value.
Also, add a new notification sound, "ding". It comes from
https://freesound.org, where the original Zulip notification sound comes
from as well. In the future, new sounds can be added by adding audio
files to the `static/audio/notification_sounds` directory.
Tweaked significantly by tabbott:
* Avoided removing static/audio/zulip.ogg, because that file is
checked for by old versions of the desktop app.
* Added a views check for the sound being valid + tests.
* Added additional tests.
* Restructured the test_events test to be cleaner.
* Removed check_bool_or_string.
* Increased max length of notification_sound.
* Provide available_notification_sounds in events data set if global
notifications settings are requested.
Fixes#8051.
The Casper code that I eliminated here seems to be
bogus, in that I don't think it really waited for
all the clicks.
I **think** the intent of the test was to verify that
when you leave settings and go back into it, it remembers
the panel. I was able to verify this manually.
We have an upcoming change that lets us use the
back button after going arrowing through multiple
settings pages.
Without first adding this commit, we would have an
infinite loop when you came back to '#settings' and
then '#settings' would rewrite the url with the current
hash.
Just replacing the browser state allows the browser
to do the right thing.
The history protocol is pretty well supported:
https://caniuse.com/#search=history
We can eliminate the janky `setup_page` methods
and just pass in section from `hashchanged`.
This sets us up to handle browser history more
nicely when you load '#settings' and we could essentially
redirect you to '#settings/your-account' (or similar
things). A future commit will address that.
We also use `launch` as the new entry point, which
is more consistent with other modules.
The prior name of this was a bit inaccurate, as we no
longer ever hide the menu item for non-admins. Also,
it belongs more naturally in `gear_menu.js` at this point.
Also, we remove one call to this, which was in a place
where it was no longer necessary.
We now run the code to disable widgets every time
we reload a section, which was the original intention
of the code, but the call to it only happened when
you first launched the page.
We also continue to run this logic for live updates
of is_admin, although it's worth noting that the
code still only handles the "demotion" case of going
from admin to non-admin. (If somebody makes you an
admin, you continue to need to reload to get
widgets enabled.)
This ensures the "account settings" UI for managing a user's own email
address uses the delivery email, since that's what users care most about.
Eventually, we'll need to add support for at least viewing both email
addresses in "account settings", but this is the right long-term
behavior.
This new setting is still hidden in the UI when not in the development
environment, because the feature isn't ready for production, but
merging this will help simplify future work on the feature.
When the list of recipients of a group private message conversation is
truncated due to being long in the "Private messages" area, we didn't
provide easy access to the full list of people. Fix this by adding a
title attribute for the area.
Fixes#10978.
This correctly shows guest users that they cannot interact with
anything in the "Organization" tab, though we preserve the read-only
access to it so that they can (e.g.) browse the organization's custom
emoji.
Previously, Topic editing was offered in the UI even to message
senders and organizations admins only if the message was no more than
one day old. This was correct for the "community topic editing" case,
but not for message senders and organization admins.
While we're at it, this also centralizes some previously haphazard
logic to always call message_edit.is_topic_editable().
Tweaked significantly by tabbott to fix the logic.
Closes#10568.
The goal here was to enforce 100% coverage on
parse_narrow, but the code has an unreachable line
and is overly tolerant of bogus urls. This will
be fixed in the next commit.
Also adds relevant tests and documentation. We currently
do not narrow to a new topic, and instead just narrow to
the stream. Similarly, we do not narrow to a PM if any of
the recipients are invalid.
We stopped setting this nearly five years ago, as part
of bd9cccffce
The big conditional that I removed here should have
always evaluated to false, as I understand the code.
Presumably either the browsers handle # -> '' redirects
better now, or we address this somewhere else in our
codebase.
We ignore keystrokes like alt-left-arrow and alt-right-arrow,
so that the browser can do back/forward.
We may need to refine the handling of ctrl/alt/shift in the
future, but now we only support single-key operations.
This change removes all the complexity around
get_hash_group(), and we now only go into the
"same overlay" logic within Settings or within
Manage Organization, but not between them.
This means if you're in Settings but hit the back
button to something under "#organization" we now
do "more stuff", since we want to err on the side
of reloading sections, etc.
There's not much flicker in my testing, and
this is not a super common transition, anyway.
This code brings the focus to the first input field with errors rather
than just the first input field present in the form after the sign up
form is rendered again after invalid data is submitted.
Note from tabbott: This still doesn't handle the ToS checkbox being
the source of the error, but that's an independent issue.
Fixes#10869.
Add a lock icon to the right of tabs on which nothing is editable
for normal users. Add lock next to Custom emoji option if only admin
can edit them.
Tweaked by tabbott to use title for the lock icons, rather than
aria-hidden, since they do convey useful information.
Fixes: #10893.
Positioning using flexbox makes life much easier for everyone. With
this change we make positioning of icon relative to the label in the
dropdown menu much easier to do and alter if required. We now no
longer need to fiddle with tedious pixel measurements for placing the
icon in the right place.
As a result of this commit we had to change a click event binding
back to be associated with .dropdown-toggle class rather than being
associated with the h3, i because of the re-arrangement of the
dropdown configs.
The integration categories dropdown was too wide in comparison to
the category lozenges and hence this commit attempts to smooth up
the UI a bit on that front.
Here we just fix the behaviour of angle icon which is present
in the integration categories dropdown. It used to change direction
from down to right only if "All" options from the dropdown was
selected (which is also the initial and default option). This behaviour
was pretty inconsistent and looked odd. Rather than having a direction
changing icon here, it migth be just better to stick with just the
down facing angle arrow. Arrow direction in general represents in
which direction the dropdown is gonna open up (in addition to the
fact that a dropdown exits here).
We make the integration categories dropdown gradually slide down/up
rather than appearing instantenously. I believe this gives a better
look to the dropdown and how it behaves.
We also fiddle a bit with the code relating to angle icon in the
dropdown. Basically though its behaviour was already buggy and
will be addressed in an upcoming commit, we try to maintain whatever
behaviour it had before introduction of the annimation effect.
Steve Howell
Tim Abbott
Vaibhav
Rishi Gupta
Vishnu Ks
Cynthia Lin
Max Nussenbaum
Aditya Jain
Akash Nimare
Amadeo234
Marco Burstein
Joshua Pan
Archit Kaushik
onkar shedge
Anders Kaseorg
Rohitt Vashishtha
Roger Souza
Abhinav Singh
varunvaruns9
Aditya Bansal