According to @showell:
> All the slow decorators can die. That was a failed experiment of
> mine from 2014 days. I have meaning to kill them for a couple years
> now. I wrote this with the best of intentions, but I believe it's
> now just cruft. We never made a "fast" mode, for one. And we kept
> writing more and more slow tests, haha.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Rename rest of function names, classes and comments containing bugdoown
to markdown in test_markdown.py. Also change the refactored classes and
functions occurences in other files.
This commit is part of series of commits aimed at renaming bugdown to
markdown.
Rename the file and all the refrences to file and module test_bugdown.py
to test_markdown.py.
This commit is part of series of commit that renames bugdown to markdown.
This commit is first of few commita which aim to change all the
bugdown references to markdown. This commits rename the files,
file path mentions and change the imports.
Variables and other references to bugdown will be renamed in susequent
commits.
Ubuntu 20.04 "focal" comes up to runlevel 5 several seconds before it
is able to successfully resolve hosts, causing `prepare-base` to fail
while fetching from the apt repositories.
Add an additional check to verify that outbound networking is running
before returning from `lxc-wait`.
As in the previous commit, we can no longer pre-install the wrong
version of postgres. Unfortunately, this leaves it out of the base
image and thus makes testing installs longer.
A generator that yields values without receiving or returning them is
an Iterator. Although every Iterator happens to be iterable, Iterable
is a confusing annotation for generators because a generator is only
iterable once.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Add arrow key navigation support for recent topics.
Simple jquery is used to allow navigation for filter buttons,
a grid system is used for navigation inside table.
Because of a security release that required a migration, there
are two migrations numbered 0261. To avoid breaking existing
installs renumbering the migrations, we skipped migration 0261
when running tools/renumber-migrations.
Previously, --interactive used to run tests from the start on a
repeated run triggered when tests failed and we decide to trigger
a re-run by pressing Enter key. Rerunning passed tests is of no interest.
It also used to run all tests in a loop even if all pass.
This commit fixes those both issues i.e it runs again from the
test that failed on pressing Enter and exits if all tests pass.
This fixes a bundle of issues where we were missing "" around
attributes coming from variables. In most cases, the variables were
integers or fixed constants from the Zulip codebase (E.g. the name of
an installed integration), but in at least one case it was
user-provided data that could potentially have security impact.
This adds support for a "spoiler" syntax in Zulip's markdown, which
can be used to hide content that one doesn't want to be immediately
visible without a click.
We use our own spoiler block syntax inspired by Zulip's existing quote
and math block markdown extensions, rather than requiring a token on
every line, as is present in some other markdown spoiler
implementations.
Fixes#5802.
Co-authored-by: Dylan Nugent <dylnuge@gmail.com>
The automated tests running in CircleCI don't actually use the `zulip`
db, so we can skip running migrations on it in some CircleCI shards to
save time.
NOTE: This only effects build jobs that run provision, except the
`production-build` job where we skip building the dbs altogether.
Migrations still run on `focal-backend` build job to ensure
we are testing all our development setup code.
These files can’t use f-strings yet because they need to run in Python
2 or Python 3.5.
Generated by pyupgrade.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The psycopg2.SQL API unfortunately doesn’t work with
django.db.migrations.RunSQL, so we need to take a detour into
PL/pgSQL for EXECUTE and format.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by pyupgrade --py36-plus --keep-percent-format.
Now including %d, %i, %u, and multi-line strings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Use read-only types (List ↦ Sequence, Dict ↦ Mapping, Set ↦
AbstractSet) to guard against accidental mutation of the default
value.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
There seems to have been a confusion between two different uses of the
word “optional”:
• An optional parameter may be omitted and replaced with a default
value.
• An Optional type has None as a possible value.
Sometimes an optional parameter has a default value of None, or None
is otherwise a meaningful value to provide, in which case it makes
sense for the optional parameter to have an Optional type. But in
other cases, optional parameters should not have Optional type. Fix
them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
To take screenshots, we log in as Desdemonia who doesn't seem
to have permissions to the streams where we capture screenshots.
This commit fixes it by logging in as Iago.
Also added a waitForNavigation until DOMContentLoaded to
avoid flakes that could occur because of us going to another URL
before Iago gets logged in.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The test_management_commands use in particular was causing pickling
errors when the test failed, because Python 3 filter returns an
iterator, not a list.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Run production suites on Ubuntu Focal.
Added separate success-http-headers files for Focal and Bionic.
Also excluded them from whitespace rules in lint.
memcached 1.5.22 in Ubuntu 20.04 has a bug where it looks for its SASL
configuration at /etc/sasl2/memcached.conf/memcached.conf instead of
/etc/sasl2/memcached.conf.
We already use a workaround for this while applying puppet configurations in
99e71f3786 but for docker builds we used
do memcached hack since we can not use systemd in docker containers.
This was written by Rishi for a very brief purpose a few years ago,
and it doesn't serve much purpose now other than to be a place we
update in code sweeps.
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Since we use this option in our docker-zulip project also
so rather than using it as a test suite option we made it
more specific i.e. --build-release-tarball-only.
arpit551
Aman Agrawal
Anders Kaseorg
Alex Vandiver
Priyank Patel
Gittenburg
Mohit Gupta
Vishnu KS
Tim Abbott
Felix
Aman Agrawal
Steve Howell
Clara Dantas
Dinesh
Sara Gulotta
Anders Kaseorg
Sharif Naas
Puneeth Chaganti