Without an explicit port number, the `stdout_logfile` values for each
port are identical. Supervisor apparently decides that it will
de-conflict this by appending an arbitrary number to the end:
```
/var/log/zulip/tornado.log
/var/log/zulip/tornado.log.1
/var/log/zulip/tornado.log.10
/var/log/zulip/tornado.log.2
/var/log/zulip/tornado.log.3
/var/log/zulip/tornado.log.7
/var/log/zulip/tornado.log.8
/var/log/zulip/tornado.log.9
```
This is quite confusing, since most other files in `/var/log/zulip/`
use `.1` to mean logrotate was used. Also note that these are not all
sequential -- 4, 5, and 6 are mysteriously missing, though they were
used in previous restarts. This can make it extremely hard to debug
logs from a particular Tornado shard.
Give the logfiles a consistent name, and set them up to logrotate.
Making this include "zulip-tornado" makes it clearer in supervisor
logs. Without this, one only sees:
```
2020-09-14 03:43:13,788 INFO waiting for port-9807 to stop
2020-09-14 03:43:14,466 INFO stopped: port-9807 (exit status 1)
2020-09-14 03:43:14,469 INFO spawned: 'port-9807' with pid 24289
2020-09-14 03:43:15,470 INFO success: port-9807 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
```
Calling `render()` in a middleware before LocaleMiddleware has run
will pick up the most-recently-set locale. This may be from the
_previous_ request, since the current language is thread-local. This
results in the "Organization does not exist" page occasionally being
in not-English, depending on the preferences of the request which that
thread just finished serving.
Move HostDomainMiddleware below LocaleMiddleware; none of the earlier
middlewares call `render()`, so are safe. This will also allow the
"Organization does not exist" page to be localized based on the user's
browser preferences.
Unfortunately, it also means that the default LocaleMiddleware catches
the 404 from the HostDomainMiddlware and helpfully tries to check if
the failure is because the URL lacks a language component (e.g.
`/en/`) by turning it into a 304 to that new URL. We must subclass
the default LocaleMiddleware to remove this unwanted functionality.
Doing so exposes a two places in tests that relied (directly or
indirectly) upon the redirection: '/confirmation_key'
was redirected to '/en/confirmation_key', since the non-i18n version
did not exist; and requests to `/stats/realm/not_existing_realm/`
incorrectly were expecting a 302, not a 404.
This regression likely came in during f00ff1ef62, since prior to
that, the HostDomainMiddleware ran _after_ the rest of the request had
completed.
This commit moves docs for users/{user_id}/subscriptions/{stream_id}
enndpoint to be after users/me/subscriptions/muted_topics docs.
We are rearranging the docs because after adding the new patch
endpoint for users/{user_id}/subscriptions/{stream_id}, openapi_core
validator tries to match 'users/me/subscriptions/muted_topics'
with 'users/{user_id}/subscriptions/{stream_id}' path in zulip.yaml
and thus gives error while running tests.
This is a bug in 'openapi_core' as it does not follows OpenAPI specs
to match concrete paths before their templated counterparts. Thus,
this commit rearranges the docs such that openapi_core validator
tries to match muted_topics endpoint with the correct path in
zulip.yaml docs.
When converting fenced code markdown, we add the language (if specified)
in a data-attribute by tweaking the HTML generated. Doing so, allows the
frontend to make use of this attr to display view-in-playground option
for codeblocks.
We use pygments to get the lexer subclass name and use that instead of
directly using the language in the data-attribute. Doing so, helps us
map different language aliases (like `js` and `javascript`) into a common
variable (like `JavaScript`) - and avoids the client from dealing with
multiple tags corresponding to the same language.
The html structure for a message like this:
``` js
..content..
```
would now be:
<div class="codehilite" data-codehilite-language="JavaScript">
<pre>..content..</pre>
</div>
Tests and fixtures amended.
Its functionality was added to Django upstream in 2.1. Also remove
the SESSION_COOKIE_SAMESITE = 'Lax' setting since it’s the default.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
`supervisorctl` starts and stops its arguments sequentially, in the
order they are passed[1]. Start them in the opposite order from the
order in which they were stopped -- this puts the dependencies first,
and the most core services (`zulip-django`) last.
While the only "dependency" here is currently thumbor, this sets us up
in case others are added later.
[1] https://github.com/Supervisor/supervisor/blob/master/supervisor/supervisorctl.py#L782
This supports running puppet to pick up new sharding changes, which
will warn of the need to finalize them via
`refresh-sharding-and-restart`, or simply running that directly.
This was a broken abstraction that returned to its caller within
multiple forked processes on exceptions, and encouraged ignoring the
error code (as all of its callers did).
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Fixes#16284.
Most of the work for this was done when we implemented correct
behavior for guest users, since they treat public streams like private
streams anyway.
The general method involves moving the messages to the new stream with
special care of UserMessage.
We delete UserMessages for subs who are losing access to the message.
For private streams with protected history, we also create UserMessage
elements for users who are not present in the old stream, since that's
important for those users to access the moved messages.
This undoes a small part of b8a2e6b5f8; namely, logs to
`zulip.zerver.webhooks`, which are all exceptions from webhooks except
UnsupportedWebhookEventType, should still be logged to the main error
loggers. This maintains the property that exceptions generating 500's
are all present in `errors.log`.
Previously, S3UploadBackend.delete_export_tarball failed to strip the
leading ‘/’ from the export path. This mistake is now caught by Moto
1.3.15. I expect it caused deletion failures in the real S3, although
I haven’t verified this.
We store export_path in the audit log with a leading ‘/’, but the
actual S3 keys do not have a leading ‘/’. Changing either system
would require a migration. So the new convention is that the
variables named ‘export_path’ have a leading ‘/’, while variables
named ‘path_id’ or ‘key’ do not.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Previously, the GitLab webhook code, namely the `get_objects_assignee`
method first tried to get a single assignee and if that failed then it
looks for multiple assignees and then it would return the first
assignee that it found (there's actually a code smell here - a loop
which would always return on the first iteration).
Instead, this commit will change that behavior to first check for
multiple assignees first then for a single assignee if we can't find
multiple assignees. Ultimately it will return a list of all of the
assignees (however many that might be [0, n]). This method has then
aptly been renamed to `get_assignees`.
Finally, we tweked the code using this method to always use it's
output as an "assignees" parameter to templates (there's also an
assignee parameter which we want to avoid here for consistency).
Signed-off-by: Hemanth V. Alluri <hdrive1999@gmail.com>
For some reasons, some of the fixtures had the +x bit set, while
some didn't. What this commit does is make sure that no fixture
is marked as "executable" (for anyone).
Signed-off-by: Hemanth V. Alluri <hdrive1999@gmail.com>
The previous code only worked by accident and hyperlink 20.0.0 breaks
it.
>>> hyperlink.parse("example.com").replace(scheme="https")
DecodedURL(url=URL.from_text('https:example.com'))
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Django treats path("<name>") like re_path(r"(?P<name>[^/]+)") and
path("<path:name>") like re_path(r"(?P<name>.+)").
This is more readable and consistent than the mix of slightly
different regexes we had before, and fixes various bugs:
• The r'apps/(.*)$' regex was missing a start anchor ^, so it
incorrectly matched all URLs that included apps/ as a substring
anywhere.
• The r'accounts/login/(google)/$' regex was missing a start anchor ^,
so it incorrectly matched all URLs that ended with
accounts/login/google/.
• The type annotation of zerver.views.realm_export.delete_realm_export
takes export_id as an int, but it was previously passed as a string.
• The type annotation of zerver.views.users.avatar takes medium as a
bool, but it was previously passed as a string.
• The [0-9A-Za-z]+ pattern for uidb64 was missing the - and _
characters that can validly be part of a base64url encoded
string (although I think the id is actually a decimal integer here,
in which case only 012345ADEIMNOQTUYcgjkwxyz are present in its
base64url encoding).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The clipboard tooltip for the "copy and close" button was incorrectly staying visible after the
copy event. Fix this by explicitly hiding tooltips in the click handler.
Fixes#16328.
The specification says “any sibling elements of a $ref are ignored”,
so their presence, although not invalid, indicates a mistake. yamole
incorrectly merges these siblings into the referenced object, but we
should not rely on this nonstandard behavior.
https://swagger.io/docs/specification/using-ref/#sibling
Signed-off-by: Anders Kaseorg <anders@zulip.com>
$ref siblings are ignored according to the OpenAPI specification, and
the referenced definitions already have examples.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Harsh Srivastava
Alex Vandiver
sahil839
Sumanth V Rao
Anders Kaseorg
Anders Kaseorg
Tim Abbott
Aman Agrawal
Ryan Rehman
Priyansh Garg
Hemanth V. Alluri
Mateusz Mandera
Aryan Shridhar
Thomas Güttler
palash