We've noticed that many production organizations don't set either an
organization description or profile picture, even large open source
organizations that could definitely take advantage of this feature.
This adds a top-of-page banner that bugs organization administrators
to add an organization description and profile picture, generally
starting on the second login (as we only do it on page load after
notifications are configured).
Significantly tweaked by tabbott to get the right user experience.
Fixes#14019.
We now use `wait_for_message_fully_processed`
to check that messages are fully rendered.
Before this, we had loopholes where messages
sent outside the view were effectively ignored.
Now we explicitly ignore the check for the
one place we do that.
The more important behavior is for messages
that get sent to the current view.
Before this change, the older version of this
function declared victory as soon as we put the
server version of a locally echoed message into
the current message list's data.
This fixes flaky behavior with 07-stars in
particular, since we need the star icon
on our last message to be there before
we click on it.
Because this function is more robust now, we
can remove some redundant checks in 08-edit.js.
I think we could write this test better, but it's not a big deal for
this to break in the rare even that we change/remove one of the 2
strings it interacts with.
When you select a typeahead, it shouldn't
immediately do the action for you; you should
have to hit enter first. Even though 99% of
the time you're gonna confirm the typeahead,
it's jarring when you don't expect it.
You can still add a bunch of default streams
quickly, using only the keyboard, because
we have always had support for the enter
key saving. (and tab and enter also works)
This is a full-stack change:
- server
- JS code
- templates
It's all pretty simple--just use stream_id instead
of stream_name.
I am 99% sure we don't document this API nor use it
in mobile, so it should be a safe change.
We now only use `page_params.realm_default_streams` during
initialization, and then after that we use `stream_data`
APIs to get default stream ids and related info. (And
for the event that replace the data, we just update our
internal data structures as well.)
Long term we should have the server just send us ids here,
since we are now hydrating info from stream data in all places.
We only used get_default_stream_names() in a
test, so now it's being replaced with a function
that just gets ids.
We'll have use for get_default_streams_ids()
in an upcoming commit.
Now if a default stream gets deleted, we just
redraw the table. We always have a small number
of default streams, and the way that we were removing
rows without the actual consent of `list_render` was
really janky (and just a vestige of pre-list-render
code that never got fully ported).
This also makes us consistent with how we handle
added streams (i.e. just call
`update_default_streams_table`).
ASIDE:
Ideally we will update `list_render` at some point to
have an API for adding and removing elements. It does
allow you now to call `data()` to reset its data, but
for now we just build a new `list_render` object every
time.
We stopped needing this with
0329b67048
(Dec 2016).
The function sets `bot.can_admin`,
which was only used in `bot_data.get_editable`.
We removed two tests (and then put back
some test setup that needed to leak down
to the last test).
This is code simplification motivated
by a recent bug that we fixed with some
server changes, but which was really
caused in some sense by our client code
using an overly finicky
condition to check falsiness.
For cross-realm bots, the value of
`user.bot_owner_id` may be `null`, or it
may simply be `undefined`, depending
on whether the server passes `None`
or simply omits the field.
We don't want out client code to be
coupled to that rather arbitrary
decision.
We were doing a `!== null` check instead
of checking for falsiness, which led to
blueslip errors in the past. Because a
bot owner id could be plausibly 0, a falsiness
check would be brittle in a different way.
Now we avoid that ugliness by calling
`get_bot_owner_user`, which either returns
an object or `undefined`.
And then the caller can just do a concise
check for whether `bot_owner` exists.
And we also fix up the crufty code that
was putting `bot_owner_full_name` on to
the object instead of using a local.
We have a bug report for this again, although
it might be on an old branch.
Fixes#13621.
Instead of having logical expressions in templates, it's always preferred
to calculating them in javascript and pass the results as a context. It
also enhances the readability of templates and testing of such logic is
easier in js over templates.
The use case for this are small or fixed tables, which do not need
filtering support. Thus we are able to not include the unnecessary
search input inside the html parent container.
It is not used at present, but will be required when we refactor
the settings pages.
We also split out exports.validate_filter function for
unit testing the above condition.
Before this commit, the reactions code would
take the `message.reactions` structure from
the server and try to "collapse" all the reactions
for the same users into the same reactions,
but with each reaction having a list of user_ids.
It was a strangely denormalized structure that
was awkward to work with, and it made it really
hard to reason about whether the data was in
the original structure that the server sent or
the modified structure.
Now we use a cleaner, normalized Map to keep
each reaction (i.e. one per emoji), and we
write that to `message.clean_reactions`.
The `clean_reactions` structure is now the
authoritatize source for all reaction-related
operations. As soon as you try to do anything
with reactions, we build the `clean_reactions`
data on the fly from the server data.
In particular, when we process events, we just
directly manipulate the `clean_reactions` data,
which is much easier to work with, since it's
a Map and doesn't duplicate any data.
This rewrite should avoid some obscure bugs.
I use `r` as shorthand for the clean reaction
structures, so as not to confuse it with
data from the server's message.reactions.
It also avoids some confusion where we use
`reaction` as a var name for the reaction
elements.
Fixes#14254
You can test this on dev:
* do "-stream:Verona" in the search bar (the minus
sign negates the search here)
* reload the browser
You should see the same search (all streams besides Verona).
Apparently, this test was not allowing the browser to run between the
keypress to start edit and checking to see if message_edit_content appeared.
I'm not sure if this is what has been causing recent flakes, but it
was definitely wrong Casper code.
We had this API:
people.add_in_realm = full-fledged user
people.add = not necessarily in realm
Now the API is this:
people.add = full-fledged user
people._add_user = internal API for cross-realm bots
and deactivated users
I think in most of our tests the distinction between
people.add() and people.add_in_realm() was just an
accident of history and didn't reflect any real intention.
And if I had to guess the intention in 99% of the cases,
folks probably thought they were just creating ordinary,
active users in the current realm.
In places where the distinction was obviously important
(because a test failed), I deactivated the user via
`people.deactivate`.
For the 'basics' test in the people test suite, I clean
up the test setup for Isaac. Before this commit I was
adding him first as a non-realm user then as a full-fledged
user, but this was contrived and confusing, and we
didn't really need it for test coverage purposes.
We want to move more logic to stream_data to facilitate
testing.
Both before and after this commit, we essentially build a
new list of users for typeahead, but now the new list
excludes subscribed users. We can do even better than
this in a follow-up commit.
Before this commit, presence used get_realm_count()
to determine whether a realm was "small" (and thus
should show all human users in the buddy list, even
humans that had not been active in a while).
The `get_realm_count` function--despite a very wrong,
misleading comment--was including bots in its count.
The new function truly counts only active humans
(and no bots).
Because we were overcounting users before this change,
we should technically adjust `BIG_REALM_COUNT` down
by some amount to reflect our original intention there
on the parameter. I'm leaving it alone for now, though,
since we've improved the performance of the buddy list
over time, and it's probably fine if a few "big" realms
get re-classified as small realms (and show more users)
by virtue of this change.
(Also note that this cutoff value only affects the
"normal" view of the buddy list; both small realms
and large realms will show long-inactive users if you
do searches.)
Fixes#14215
We now restrict emails on the zulip realm, and now
`email` and `delivery_email` will be different for
users.
This change should make it more likely to catch
errors where we leak delivery emails or use the
wrong field for lookups.
Given that can_mark_messages_read is called whenever the blue box
cursor stops on a message and that it is calculated purely on the
basis of sorted_term_types, it makes sense to cache the result.
If you were in the "Starred messages" narrow and
your pointer was on a message with the stream/topic
of "social/lunch", we wouldn't move you to the unread
messages for that topic.
I fixed this by removing the code that looked at
the current message's topic. Instead, we only look
at the active narrow to figure out the "next" topic
to go to.
Fixes#14120.
Original email address is shown to admin users in subscriber list when
email_address_visibilty is set to "Admins only" by passing delivery_email
at required places. Email address are not shown to non-admin users when
visibility is set to "Admins only".
Tweaked by tabbott to fix a few bugs and dead code.
Fixes a part of #13541.
This intent is that we'll be able to reuse this when editing streams
as well.
* Rename method: filter_with_new_topic to filter_with_new_param.
* Fix tests and method calls.
This extends our email address visibility settings to deny access to
user email addresses even to organization administrators.
At the moment, they can of course change the setting (which leaves an
audit trail), but in the future only organization owners will be able
to change that setting.
While we're at this, we rewrite the settings_data.js test to cover all
the cases in a more consistent way.
Fixes#14111.
The file populates `windows.i18n`, so now
the file name matches our convention.
Note that the module really just initializes
`i18next` and then does this:
window.i18n = i18next;
It doesn't really add any functionality to
third party library.
Before this test, we were validating the behavior
of `i18next`, but we weren't validating our light
layer that sits on top of `i18next`, which currently
resides in the slightly misnamed `translations.js`
file.
The translations module is now so small that I'll
just quote it verbatim here:
import i18next from 'i18next';
i18next.init({
lng: 'lang',
resources: {
lang: {
translation: page_params.translation_data,
},
},
nsSeparator: false,
keySeparator: false,
interpolation: {
prefix: "__",
suffix: "__",
},
returnEmptyString: false, // Empty string is not a valid translation.
});
window.i18n = i18next;
We now just do `zrequire('translations')` to initialize
the `i18next` library, which allows us to have simpler
test setup and to actually exercise the above call to
`i18next.init`.
This change now gives us 100% line coverage of `translations.js`,
which of course isn't that hard to acheive (see above).
This extracts a new module with three
functions, which we will test with 100%
line coverage:
- show_email
- email_for_user_settings
- get_time_preferences
The first two break several dependencies
in the codebase on `settings_org.js`. The
`get_time_preferences` breaks an annoying
dependency on `page_params` within people.
The module is pretty cohesive, in terms that
all three functions are just light wrappers
around `page_params` and/or `settings_config`.
Now all the modules that want to call show_email()
only have to require `settings_data`, instead of
having a dependency on the much heavier
`settings_org.js` module.
I also make some of the unit tests here be more
full-stack, where instead of stubbing show_email,
I basically just toggle `page_params.is_admin`.
Explicitly stubbing i18n in 48 different files
is mostly busy work at this point, and it doesn't
provide much signal, since often it's invoked
only to satisfy transitive dependencies.
This follows the convention of other code calling into
add_sub_to_table of checking whether the stream settings overlay is
open (and thus in the DOM) before trying to rerender it.
We add these two functions to the API,
so that we no longer have `alert_words_ui`
using private data from `alert_word`:
alert_words.has_alert_word()
alert_words.get_word_list()
And to initialize the data, we have a proper
`initialize` method that is passed in only
the parameters that it needs from `ui_init`.
(We also move the step of deleting `alert_words`
from `page_params` to the `ui_init` module.)
Because it's a bit less cumbersome to initialize
`alert_words`, we now just it directly in the
node tests for `alert_words_ui`.
This is follow up to da79fd206a
I accidentally skipped over pm_conversations. Same
ideas as the bigger previous commit--we pass in params
to the initialize function and do the delete cleanup
within ui_init.
Let's say you have module hello.js like so:
// hello.js
const hello_world = i18n.t('Hello world');
exports.get_greeting = () => hello_world;
And then two modules like this:
// apple.js
const hello = require('hello');
exports.foo = () => {
show_greeting(hello.get_greeting());
};
// banana.js
const hello = require('hello');
exports.foo = () => {
display_greeting(hello.get_greeting());
};
The test for apple.js could look like this,
and it won't crash due to the stub:
set_global('i18n', {t: () => {}});
zrequire('hello');
zrequire('apple');
Now let's say your write this broken version
of a test for banana.js:
zrequire('hello');
zrequire('banana');
If you run `./tools/test-js-with-node`, the
"banana" test will pass, because while it
does require "hello", it won't actually
*execute* the code that happens at require
time for "hello", because it's already in
the cache. Here is the code that gets
skipped:
const hello_world = i18n.t('Hello world');
But then if you try to run the banana test
individually, the above line of code will
cause the test to crash. And it will crash
even before you actually try to test the
meaningful code here:
exports.foo = () => {
display_greeting(hello.get_greeting());
};
This commit fixes this leak scenario by just
aggressively clearing out things from the
require cache.
This slows tests down by about 10%, which I think
is worth the extra safety here.
Jagan
Steve Howell
Tim Abbott
Pragati Agrawal
Ryan Rehman
YashRE42
sahil839
Wbert Adrian Castro Vera
Anders Kaseorg
Rohitt Vashishtha
Vaibhav Raj Singh