With webpack, variables declared in each file are already file-local
(Global variables need to be explicitly exported), so these IIFEs are
no longer needed.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
After migration to an ES6 module, `server_furthest_read` would no
longer be mutable from outside the module.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
When we're handling a single message that was locally echoed, there
will very likely be 0 messages not removed by
`echo.process_from_server`, and we can skip the unnecessary call to
`message_events.insert_new_messages`. This is a small performance
optimization and logical simplification when sending messages.
Show "sent to different narrow" notification and other such notification by
notifications.notify_local_mixes for non locally echoed message sent by
current client.
With significant new comments added by tabbott.
Fixes: #11488.
Apparently, we didn't have one of these, and thus had a moderate
number of generally very old violations in the codebase. Fix this and
clear the ones that exist..
When there is some error in connecting to server(more specifically to the
tornado server) the "Unable to connect to Zulip" connection error message
gets cleared as Django server could send the response of "get" request of
old messages and hence get_old_messages_success hides the error message
even though the connection is not properly established.
Fixes: #5599.
This is general fix that makes sure that we
apply all message-modifying events after we
apply the events for the initial incoming
messages.
The particular scenario that was reported here
was when you would have two tabs for Zulip,
with one of them open and in a PM view, and
with the open tab being at the bottom of the
feed, such that incoming messages would be
immediately visible.
Now suppose the other person in that PM
conversation sent you a message.
The open tab would properly immediately
mark the message as read, and notify
the server. The problem was that the closed
tab would not process the main message event
until it "woke up", by which time the flag-update
event was bundled into the same event batch
as the main message event. We'd then process
the flag-update first, which essentially was
a noop, since the actual message wasn't in
the message store yet. The user would then
see unread counts increment in the closed tab,
while the open tab didn't increment. This
was confusing.
Now `server_events.js` processes the actual
message first and does the flag-update as part of a
`post_message_events` loop.
We include events for updating message flags,
deleting messages, and attaching submessages
to messages in the `post_message_events` array.
This bug was a bit difficult to simulate in a dev
environment, since you needed your "open" tab
to be in focus to simulate the race, but as
soon as you tab to another place to deliver
a message (whether from the browser or otherwise),
the open tab is no longer in focus.
I did this in the console of my "open"
tab to work around it:
unread_ops.process_visible = unread_ops.mark_current_list_as_read;
This problem was easy to reproduce, but it wasn't
entirely consistent. I often needed to send
several messages in succession to trigger event
batching and force the race condition. (This wasn't
precisely a "race", as events actually arrive in the
correct order; it was having them arrive in the same
batch that triggered the bug.)
This is part of work to break some of our
nastier circular dependencies in preparation
for our es6 migration.
This commit should facilitate loading leaf-like
modules such as people.js before all of the things
that reload.js depends on.
This commit prepares the frontend code to be consumed by webpack.
It is a hack: In theory, modules should be declaring and importing the
modules they depend on and the globals they expose directly.
However, that requires significant per-module work, which we don't
really want to block moving our toolchain to webpack on.
So we expose the modules by setting window.varName = varName; as
needed in the js files.
We no longer set message.flags in the local echo path.
In the markdown parsing step, we just set message.mentioned
directly.
And then we change `insert_new_messages` to no longer
convert flags to booleans, and move that code to only
happen for incoming server message events.
We sometimes get blueslip errors from browsers that are clearly still
attempting to reload long after they should have. These browsers can
produce a lot of unnecessary presence update exceptions.
To solve that, we start checking reload_in_progress in the presence
code path.
While we're at it, we also add some blueslip logging for the reload
code path, in case it becomes useful when debugging future issues.
The issue has a lot of extra details, but in short, if several
messages were sent at very close to the same time, it's possible that
the event queues will receive the "new message" events out-of-order.
This, in turn, could cause `get_events` to return an incorrectly
sorted block of messages. These would then be passed into
`message_list.add_messages`, which doesn't handle that sort of
unsorted situation correctly (in short, the `self.first.id()`
comparison checks are not accurate for that situation, since we don't
update the boundaries after the first messages is processed).
The end result of this bug was that it was possible for the message
list to be out-of-order, which in turn would cause exceptions when
scrolling with the mouse.
Fixes#6948.
This commit extract send_messages.js to clean up code related
to the following things:
* sending data to /json/report_send_time
* restarting the event loop if events don't arrive on time
The code related to /json/report changes the following ways:
* We track the state almost completely in the new
send_messages.js module, with other modules just
making one-line calls.
* We no longer send "displayed" times to the servers, since
we were kind of lying about them anyway.
* We now explicitly track the state of each single sent
message in its own object.
* We now look up data related to the messages by local_id,
instead of message_id. The problem with message_id was
that is was mutable. Now we use local_id, and we extend
the local_id concept to messages that don't get rendered
client side. We no longer need to react to the
'message_id_changed' event to change our hash key.
* The code used to live in many places:
* various big chunks were scattered among compose.js,
and those were all moved or reduced to one-line
calls into the new module
* echo.js continues to make basically one-line calls,
but it no longer calls compose.report_as_received(),
nor does it set the "start" time.
* message_util.js used to report received events, but
only when they finally got drawn in the home view;
this code is gone now
The code related to restarting the event loop if events don't arrive
changes as follows:
* The timer now gets set up from within
send_messages.message_state.report_server_ack,
where we can easily inspect the current state of the
possibly-still-in-flight message.
* The code to confirm that an event was received happens now
in server_events.js, rather than later, so that we don't
falsely blame the event loop for a downstream bug. (Plus
it's easier to just do it one place.)
This change removes a fair amount of code from our node tests. Some
of the removal is good stuff related to us completing killing off
unnecessary code. Other removals are more expediency-driven, and
we should make another sweep at ramping up our coverage on compose.js,
with possibly a little more mocking of the new `send_messages` code
layer, since it's now abstracted better.
There is also some minor cleanup to echo.resend_message() in this
commit.
See #5968 for a detailed breakdown of the changes.
This fixes the original issue that #5598 was the root cause of; when
the user returns to a Zulip browser tab after they've been idle past
the timeout (10 min, per IDLE_EVENT_QUEUE_TIMEOUT_SECS), we now
correctly reload the page even if they're using Zulip in German or
another non-English language where we have a translation for the
relevant error message.
I pushed a bunch of commits that attempted to introduce
the concept of `client_message_id` into our server, as
part of cleaning up our codepaths related to messages you
sent (both for the locally echoed case and for the host
case).
When we deployed this, we had some strange failures involving
double-echoed messages and issues advancing the pointer that appeared
related to #5779. We didn't get to the bottom of exactly why the PR
caused havoc, but I decided there was a cleaner approach, anyway.
We now use a client-side message id to track the state of our
sent messages. This sets up future commits to start tracking
state earlier in the message's life cycle.
It also avoids ugly reify logic where we capture an event to
update our data structure to key on the server's message id
instead of the local id. That eliminates the node test as well.
Another node test gets deleted here, just because it's not
worth the trouble with upcoming refactorings.
This commit starts to decouple client_message_id from local_id.
We don't really take advantage of the decoupling in this
commit--in fact, it's a bit of a pain at first. But this should
be a fully working checkpoint commit.
We are deprecating local_id/local_message_id on the Python server.
Instead of the server knowing about the client's implementation of
local id, with the message id = 9999.01 scheme, we just send the
server an opaque id to send back to us.
This commit changes the name from local_id -> client_message_id,
but it doesn't change the actual values passed yet.
The goal for client_key in future commits will be to:
* Have it for all messages, not just locally rendered messages
* Not have it overlap with server-side message ids.
The history behind local_id having numbers like 9999.01 is that
they are actually interim message ids and the numerical value is
used for rendering the message list when we do client-side rendering.
When the emoji settings page was reopened after uploading a realm
emoji without doing a page refresh, the uploaded emoji disappeared
from the emoji list. This was so because the emoji settings page uses
`page_params.realm_emoji` to render the emojis which was not updated
when a emoji was added.
Fixes: #5130.
This makes it possible for Zulip administrators to delete messages.
This is primarily intended for use in deleting early test messages,
but it can solve other problems as well.
Later we'll want to play with the permissions model for this, but for
now, the goal is just to integrate the feature.
Note that it saves the deleted messages for some time using the same
approach as Zulip's message retention policy feature.
Fixes#135.
This is the first part of handling an annoying race that would cause
us to try drawing the right sidebar using (in part) users that we
haven't learned about yet (because we were offline/suspended when they
were created, and we haven't quite realized our event queue is gone yet).
This removes the old compose emoji picker in its entirety, changing
the few callbacks needed to launch the reactions-style emoji picker
instead and hook it up properly.
Callbacks for reactions and composing messages are distinguished by
selecting for, respectively, the .reaction and .composition classes.
Fixes#4122.
Note that this code is disabled until the infrastructure for the
feature can be finished.
Tweaked by tabbott to use slightly cleaner names for the various sets.
* reset the emoji popover in case of an event
regarding update of realm_emoji.
* test-node-with-js: Add dependency - popovers module;
In dispath.js to support popovers object.
This is mostly moving code, but we do add short-circuit logic
for some live-updating methods here.
Note that this affects two different sections of the admin app:
* Organization settings
* Authentication methods
We really want to move to one module per section, but there is some
legacy coupling that makes this difficult for now.
* Change the classes and ids of different widgets and modals
and make suitable changes in `admin.js`.
* Remove any other occurrences of `alias` or `realm_alias`
from admin.js.
This commit adds the backend support for a new style of tutorial which
allows for highlighting of multiple areas of the page with hotspots that
disappear when clicked by the user.
- Add message retention period field to organization settings form.
- Add css for retention period field.
- Add convertor to not negative int or to None.
- Add retention period setting processing to back-end.
- Fix tests.
Modified by tabbott to hide the setting, since it doesn't work yet.
The goal of merging this setting code now is to avoid unnecessary
merge conflicts in the future.
Part of #106.
This adds an organization description field to the Realm model, as well as
an input field to the organization settings template. Added three tests.
Set the max length of the field to 100 characters.
Fixes#3962.
Send typing notification events when user types in the compose box.
Listen for these events and display a notification.
Sending notifications: Notifications are throttled, so that start
notifications are sent every 10 seconds of active typing, and stop
notifications are sent 5 seconds after active typing stops or when the
compose box is closed.
Displaying notifications:
When a typing notification is received, if the current narrow is private
messages or is: pm-with and the user is not the sender,
"Othello is typing..." is displayed underneath the last message. This notification is
removed after 15 seconds. If another notification is received during this period, the
expiration is extended. When a stop notification is received the notification is removed.
Internally, a list of users currently typing is maintained for each
conversation (in a dict). When an event is received the list (for the appropriate
conversation) is updated and the notifications template is re-rendered
based on the narrow information. This template is also re-rendered when
the narrow changes.
Significantly modified by tabbott for clarity.
Fixes#150.
We pass in sub instead of stream_name, to support callers that
already do lookups by stream id.
And then we make the second optional argument be subscribers, since
that is all we were using from the old `attrs` argument.
If we get invalid events related to stream subscribers, we now
exit earlier to prevent ugly tracebacks. We may eventually
want to upgrade some of these warnings to errors, once we fix some
of our live-update bugs. In particular, we don't yet live-update
users when streams go from private to public, so if you add/remove
subscribers to a newly-public stream that a user still thinks is
private, they will not be able to handle the event through no
fault of the codepath that happens during the add/remove.
This currently only supports this in emoji reactions, not in actual
emoji in message bodies, but it's a great start for people who want a
text-only view.
Tweaked to update the text by tabbott.
Fixes#3169.
I noticed while reviewing #3807 that we still haven't fixed this;
because timestamps are primarily displayed in the message view, fixing
this is trivial.
Add neccesary UI in #administration and #settings for
changing the bot owner. The bot owner select control
is rendered dynamically in order to avoid performance
issues in case of large number of users.
Fixes: #2719.
When an admin deactivate a stream, we now remove the
appropriate row from the default streams tables for other
folks viewing default streams in the admin tables.
This is a fairly risky, invasive change that speeds up
stream deactivation by no longer sending subscription/remove
events for individual subscribers to all of the clients who
care about a stream. Instead, we let the client handle the
stream deactivation on a coarser level.
The back end changes here are pretty straightforward.
On the front end we handle stream deactivations by removing the
stream (as needed) from the streams sidebar and/or the stream
settings page. We also remove the stream from the internal data
structures.
There may be some edge cases where live updates don't handle
everything, such as if you are about to compose a message to a
stream that has been deactivated. These should be rare, as admins
generally deactivate streams that have been dormant, and they
should be recoverable either by getting proper error handling when
you try to send to the stream or via reload.
For our user administration, we now primarily work with user ids
that get put into data-user-id attributes. We still put emails in the
tags to make our Casper tests easy to maintain.
This requires a minor change to the back end to pass down user ids
for the /users endpoint (in get_members_backend).
If we get a realm_user update for a user that is **not**
changing their full name, we no longer call
admin.update_user_full_name().
This was probably a fairly minor bug.
This commit replaces the placeholder "clipboard" button with a reaction button.
This is done on any message that can't be edited. Also, on messages sent by
the user the actions popover (toggled by the down chevron icon) contains
an option to add a reaction.
When clicked, a popover with a search bar and a list of emojis is displayed.
If the right sidebar is collapsed (the viewport is small), the popover is placed
to the left of the button.
Focus is set to the search bar. Typing in the search bar filters emojis.
Emojis with which the user has reacted to this message are highlighted.
Clicking them sends an API request to remove that reaction.
Clicking on non-highlighted emojis sends an API request to add a reaction.
When the popover loses focus it is closed.
The frontend listens for reaction events. When an add-reaction event is
received, the emoji is displayed at the bottom of the message with a
count initialized to 1. If there was an existing reaction to the message with
the same emoji, the count is incremented.
Old messages fetched from the server contain reactions.
They are displayed (along with title and count) at the bottom
of each message.
When clicking the emoji reaction at the bottom of the message, if the
user has already reacted with that emoji to this message, the reaction
is removed and the count is decremented. Otherwise, a reaction is added
and the count is incremented.
Hovering over the emoji reaction at the bottom of the message displays
a list of users who have reacted with this emoji along with the
emoji name.
Hovering over the emoji reactions at the bottom of the message displays
a button to add a reaction.
Fixes#541.
This commit changes people.remove() to be people.deactivate(),
and it fixes a bug where deactivating users was causing tracebacks
in the PM list if somebody had PM'ed the deactivated user
recently.
This adds support for only allowing normal users with account age
equal or greater than a "waiting period" threshold to create streams;
this is useful for open organizations that want new members to
understand the community before creating streams.
If create_stream_by_admins_only setting is set to True, only admin users
were able to create streams. Now normal users with account age greater
or equal than waiting period threshold can also create streams.
Account age is defined as number of days passed since the user had
created his account.
Fixes: #2308.
Tweaked by tabbott to clean up the actual can_create_streams logic and
the tests.
Anders Kaseorg
Anders Kaseorg
Tim Abbott
Mohit Gupta
Shubham Dhama
Steve Howell
Armaan Ahluwalia
Rishi Gupta
Steve Howell
Greg Price
Cory Lynch
Harshit Bansal
K.Kanakhin
Jack Zhang
fionabunny
Tejas Kasetty
hackerkid
Brock Whittaker
Amy Liu
Ayush Jain
Sarah Stringer
Raghav Jajodia
Arpith Siromoney
Sourav Badami
Elliott Jin
paxapy
vaibhav
Rafid Aslam
Bojidar Marinov
lonerz
Tommy Ip
Vladislav Manchev