Since it's the initial migration, this can't have any useful effect.
I'm pretty sure the backstory is we did a manual squash of migrations
during the process of open-sourcing Zulip, and incorrectly didn't
remove this code.
It's not possible to directly upgrade from pre-5.3 versions to main,
since they do not have any supported OSes in common. Thus, this
dependency on the confirmation model, which risks creating a circular
dependency if we squash migrations, can be removed.
Adds some validation for changing the realm's max invites via the
support view so that it is not set below the default max for the
realm's plan type, and so that if it's currently set to the default
max it's not reset to that same value.
This commit adds a new `group_size` field to the `DirectMessageGroup`
model, and backfills its value to each of the existing direct message
groups.
Fixes part of #25713
Earlier, we were using 'send_event' in 'do_change_is_billing_admin'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_update_outgoing_webhook_service' which can lead to a
situation, if any db operation is added after the 'send_event'
in future, where we enqueue events but the action function fails
at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_set_push_notifications_enabled_end_timestamp' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_set_realm_stream' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_set_realm_authentication_methods' which can lead to a situation
where we enqueue events but there's an error at a later stage in
the codepath using this function.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_set_realm_user_default_setting
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_regenerate_api_key'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_change_full_name'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
The Slack API when returning the emoji records, returns the record for
its thumbsup_all emoji with the url ending with .png, even though the
file is a gif.
For that reason, we have to make that code correct file extensions based
on the response content-type. Emojis are the smallest set of images to
download, so for simplicity of implementation, we remove the
parallelization of the downloads in favor of just processing them
serially.
Ideally this would besplit up into two commits, but it's hard to split
into self-contained, atomic chunks now that this segment of the
import/export system is generally kind of broken after thumbnailing
system changes.
1. 3rd party export converters don't make .original image files.
Insteadthey provide a single file, which the import should treat as if
it's .original.
2. 3rd party converters create all the records with is_animated=False.
That's an issue, because without setting that correctly on the
RealmEmoji objects, Zulip doesn't know that it should use the "still"
thumbnail when the emoji is being used in a user's status. Which leads
to incorrectly displaying the user status with the distracting
animation.
The export tool was only exporting the already-thumbnailed emoji file,
omitting the original one. Now we make sure to export the .original file
too, like we do for avatars, and make the import tool process it
directly, to thumbnail it directly and generate a still in the case of
animated emojis.
Otherwise, the imported realm wouldn't have the <emoji>.png.original
file that we generally expect to have accessible, and stills for
animated emojis were completely missing.
Convert `message_send.py` use `typed endpoint`.
Disable `message_send` endpoint `to` parameter in the `openapi`
`validate_json_schema` check, because it is a special case where the
content type of the parameter is application/json but the
parameter may or may not be JSON encoded since previously we also
accepted a raw string and some ad-hoc bot might still depend on sending
a raw string.
Remove unused validators from `validator.py`.
This commit updates the db transaction to be durable for
do_update_user_custom_profile_data_if_changed to avoid
addition of any outer atomic block.
While adding any outer atomic block this will raise a runtime error
and we can replace the durable argument with 'savepoint=False'
otherwise we'll have to manually track down the action functions
getting called in that outer atomic block and set the savepoint=False
otherwise it'll lead to creation of savepoints which we don't want.
We can't set savepoint=False before hand to the outermost action
function because it leads to rollback of transaction in tests when
an error is raised in action function.
Earlier, we were using 'send_event' in
check_remove_custom_profile_field_value which can lead to a
situation where we enqueue events but the function fails at a
later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
There was a bug here that would trigger an exception inside
`sync_user_profile_custom_fields`, causing it to get logged with
logging.warning, when an attribute configured for SAML custom profile
field sync was missing from a SAMLResponse or had an empty value.
`sync_user_profile_custom_fields` expects valid values, and None is not
valid.
We could consider a slightly different behavior here instead - when an
attribute is sent with no value in the SAMLResponse, that means the attr
has no value in the IdP's user directory - so perhaps a better behavior
would be to also remove the custom profile field value in Zulip. However
there are two issues with that:
1. It's not necessarily the best behavior, because an organization might
want the "user doesn't have this attribute set at the IdP level" state
to just mean that the user should be free to set the value manually in
Zulip if they wish. And having that value get reset on every login would
then be an issue. The implementation in this commit is consistent with
this philosophy.
2. There's some implementation difficulty - upstream
`self.get_attr(...)`, which we use for reading the attr value from the
SAMLResponse, doesn't distinguish between an attribute being sent with
no value and the attribute not being sent at all - in both cases it
returns None. So we'd need some extra work here with parsing the
SAMLResponse properly, to be able to know when the custom profile field
should get cleared.
Replace the SOCIAL_AUTH_SYNC_CUSTOM_ATTRS_DICT with
SOCIAL_AUTH_SYNC_ATTRS_DICT, designed to support also regular user attrs
like role or full name (in the future).
Custom attributes can stay configured as they were and will get merged
into SOCIAL_AUTH_SYNC_ATTRS_DICT in computed_settings, or can be
specified in SOCIAL_AUTH_SYNC_ATTRS_DICT directly with "custom__"
prefix.
The role sync is plumbed through to user creation, so users can
immediately be created with their intended role as provided by the IdP
when they're creating their account, even when doing this flow without
an invitiation.
This commit make changes in code to include can_manage_group
field to UserGroup objects passed with response of various endpoints
including "/register" endpoint and also in the group object
send with user group creation event.
Earlier there was only a realm level setting for configuring
who can edit user groups. A new group level setting is also added
for configuring who can manage that particular group.
Now, a user group can be edited by a user if it is allowed from
realm level setting or group level setting.
This commit make changes to also use group level setting
in determining whether a group can be edited by user or not.
Also, updated tests to use api_post and api_delete helpers instead
of using client_post and client_delete helpers with different users
being logged in.
This commit adds a new group level setting can_manage_group
for configuring who can manage a group. This commit only adds
the field in database and make changes to automatically create
single user groups corresponsing to acting user
which will be the default value for this setting.
Fixes part of #25928.
Earlier there was a single backend test for testing group edit policy
for creating and deleting user group.This commit make changes in the test
and now there are two separate tests for testing group edit policy for
creating and deleting user groups.
This was done because in future commits we will be adding a
realm level setting for configuring who can create user groups.
Also, updated tests to use api_post and api_delete helpers instead
of using client_post and client_delete helpers with different users
being logged in.
Earlier there was a single decorator function to check whether
user can create and edit user groups. This commit adds a new
decorator function to check whether user has permissions to
create user groups.
This was done because in future commits we will be adding a
realm level setting for configuring who can create user groups.
This commit refactors code in user_groups_in_realm_serialized
such that we do not prefetch "can_mention_group__direct_members"
and "can_mention_group__direct_subgroups" using prefetch_related
and instead fetch members and subgroups for all groups in separate
queries and then use that data to find the members and subgroups
of the group used for that setting.
This change helps us in avoiding two prefetch queries for each
setting when we add more group settings.
Earlier, we were using 'send_event' in
do_change_stream_message_retention_days which can lead to a situation
where we enqueue events but the function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_change_stream_description
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_change_stream_post_policy
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
This commit adds a transaction.atomic decorator to the
'do_change_subscription_property' function to make
the db operations in the action function atomic.
Also, send_event is changed to send_event_on_commit.
Earlier, we were using 'send_event' in 'do_unmute_user'
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_mute_user' which
can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_update_message_flags
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Tim Abbott
Alex Vandiver
Lauryn Menard
afeefuddin
roanster007
Prakhar Pratyush
Mateusz Mandera
Kenneth Rodrigues
Ujjawal Modi
Sahil Batra
evykassirer