The RabbitMQ docs state ([1]):
RabbitMQ nodes and CLI tools (e.g. rabbitmqctl) use a cookie to
determine whether they are allowed to communicate with each
other. [...] The cookie is just a string of alphanumeric
characters up to 255 characters in size. It is usually stored in a
local file.
...and goes on to state (emphasis ours):
If the file does not exist, Erlang VM will try to create one with
a randomly generated value when the RabbitMQ server starts
up. Using such generated cookie files are **appropriate in
development environments only.**
The auto-generated cookie does not use cryptographic sources of
randomness, and generates 20 characters of `[A-Z]`. Because of a
semi-predictable seed, the entropy of this password is thus less than
the idealized 26^20 = 94 bits of entropy; in actuality, it is 36 bits
of entropy, or potentially as low as 20 if the performance of the
server is known.
These sizes are well within the scope of remote brute-force attacks.
On provision, install, and upgrade, replace the default insecure
20-character Erlang cookie with a cryptographically secure
255-character string (the max length allowed).
[1] https://www.rabbitmq.com/clustering.html#erlang-cookie
5c450afd2d, in ancient history, switched from `check_call` to
`check_output` and throwing away its result.
Use check_call, so that we show the steps to (re)starting the server.
Zulip writes a `rabbitmq.config` configuration file which locks down
RabbitMQ to listen only on localhost:5672, as well as the RabbitMQ
distribution port, on localhost:25672.
The "distribution port" is part of Erlang's clustering configuration;
while it is documented that the protocol is fundamentally
insecure ([1], [2]) and can result in remote arbitrary execution of
code, by default the RabbitMQ configuration on Debian and Ubuntu
leaves it publicly accessible, with weak credentials.
The configuration file that Zulip writes, while effective, is only
written _after_ the package has been installed and the service
started, which leaves the port exposed until RabbitMQ or system
restart.
Ensure that rabbitmq's `/etc/rabbitmq/rabbitmq.config` is written
before rabbitmq is installed or starts, and that changes to that file
trigger a restart of the service, such that the ports are only ever
bound to localhost. This does not mitigate existing installs, since
it does not force a rabbitmq restart.
[1] https://www.erlang.org/doc/apps/erts/erl_dist_protocol.html
[2] https://www.erlang.org/doc/reference_manual/distributed.html#distributed-erlang-system
This is required in order to lock down the RabbitMQ port to only
listen on localhost. If the nodename is `rabbit@hostname`, in most
circumstances the hostname will resolve to an external IP, which the
rabbitmq port will not be bound to.
Installs which used `rabbit@hostname`, due to RabbitMQ having been
installed before Zulip, would not have functioned if the host or
RabbitMQ service was restarted, as the localhost restrictions in the
RabbitMQ configuration would have made rabbitmqctl (and Zulip cron
jobs that call it) unable to find the rabbitmq server.
The previous commit ensures that configure-rabbitmq is re-run after
the nodename has changed. However, rabbitmq needs to be stopped
before `rabbitmq-env.conf` is changed; we use an `onlyif` on an `exec`
to print the warning about the node change, and let the subsequent
config change and notify of the service and configure-rabbitmq to
complete the re-configuration.
`/etc/rabbitmq/rabbitmq-env.conf` sets the nodename; anytime the
nodename changes, the backing database changes, and this requires
re-creating the rabbitmq users and permissions.
Trigger this in puppet by running configure-rabbitmq after the file
changes.
This reverts commit 889547ff5e. It is
unused in the Docker container, as the configurtaion of the `zulip`
user in the rabbitmq node is done via environment variables. The
Zulip host in that context does not have `rabbitmqctl` installed, and
would have needed to know the Erlang cookie to be able to run these
commands.
The Erlang `epmd` daemon listens on port 4369, and provides
information (without authentication) about which Erlang processes are
listening on what ports. This information is not itself a
vulnerability, but may provide information for remote attackers about
what local Erlang services (such as `rabbitmq-server`) are running,
and where.
`epmd` supports an `ERL_EPMD_ADDRESS` environment variable to limit
which interfaces it binds on. While this environment variable is set
in `/etc/default/rabbitmq-server`, Zulip unfortunately attempts to
start `epmd` using an explicit `exec` block, which ignores those
settings.
Regardless, this lack of `ERL_EPMD_ADDRESS` variable only controls
`epmd`'s startup upon first installation. Upon reboot, there are two
ways in which `epmd` might be started, neither of which respect
`ERL_EPMD_ADDRESS`:
- On Focal, an `epmd` service exists and is activated, which uses
systemd's configuration to choose which interfaces to bind on, and
thus `ERL_EPMD_ADDRESS` is irrelevant.
- On Bionic (and Focal, due to a broken dependency from
`rabbitmq-server` to `epmd@` instead of `epmd`, which may lead to
the explicit `epmd` service losing a race), `epmd` is started by
`rabbitmq-server` when it does not detect a running instance.
Unfortunately, only `/etc/init.d/rabbitmq-server` would respects
`/etc/default/rabbitmq-server` -- and it defers the actual startup
to using systemd, which does not pass the environment variable
down. Thus, `ERL_EPMD_ADDRESS` is also irrelevant here.
We unfortunately cannot limit `epmd` to only listening on localhost,
due to a number of overlapping bugs and limitations:
- Manually starting `epmd` with `-address 127.0.0.1` silently fails
to start on hosts with IPv6 disabled, due to an Erlang bug ([1],
[2]).
- The dependencies of the systemd `rabbitmq-server` service can be
fixed to include the `epmd` service, and systemd can be made to
bind to `127.0.0.1:4369` and pass that socket to `epmd`, bypassing
the above bug. However, the startup of this service is not
guaranteed, because it races with other sources of `epmd` (see
below).
- Any process that runs `rabbitmqctl` results in `epmd` being started
if one is not currently running; these instances do not respect any
environment variables as to which addresses to bind on. This is
also triggered by `service rabbitmq-server status`, as well as
various Zulip cron jobs which inspect the rabbitmq queues. As
such, it is difficult-to-impossible to ensure that some other
`epmd` process will not win the race and open the port on all
interfaces.
Since the only known exposure from leaving port 4369 open is
information that rabbitmq is running on the host, and the complexity
of adjusting this to only bind on localhost is high, we remove the
setting which does not address the problem, and document that the port
is left open, and should be protected via system-level or
network-level firewalls.
[1]: https://bugs.launchpad.net/ubuntu/+source/erlang/+bug/1374109
[2]: https://github.com/erlang/otp/issues/4820
mochiweb was renamed to web_dispatch in RabbitMQ 3.8.0, and the plugin
is not enabled. Nor does this control the management interface, which
would listen on port 15672.
Called the `decorate` function to update stream color in the compose
box on `change` instead of `blur`.
On clicking on a stream option, the input box for the stream name
remained in focus, hence decorate wasn't triggered on blur. Using
the change event instead, ensures that decorate will be called
anytime the stream is changed.
Fixes: #20871
The job name is just the constant `production_build`. Renaming it to
have the OS in the key ensures that it is not shared across OS'es (for
instance between `4.x` and `main`, which are now bionic and buster,
respectively), and also allows it to share caches with the install
step, which uses the OS name in that place.
This addresses the problems mentioned in the previous commit, but for
existing installations which have `authenticator = standalone` in
their configurations.
This reconfigures all hostnames in certbot to use the webroot
authenticator, and attempts to force-renew their certificates.
Force-renewal is necessary because certbot contains no way to merely
update the configuration. Let's Encrypt allows for multiple extra
renewals per week, so this is a reasonable cost.
Because the certbot configuration is `configobj`, and not
`configparser`, we have no way to easily parse to determine if webroot
is in use; additionally, `certbot certificates` does not provide this
information. We use `grep`, on the assumption that this will catch
nearly all cases.
It is possible that this will find `authenticator = standalone`
certificates which are managed by Certbot, but not Zulip certificates.
These certificates would also fail to renew while Zulip is running, so
switching them to use the Zulip webroot would still be an improvement.
Fixes#20593.
Installing certbot with --method=standalone means that the
configuration file will be written to assume that the standalone
method will be used going forward. Since nginx will be running,
attempts to renew the certificate will fail.
Install a temporary self-signed certificate, just to allow nginx to
start, and then follow up (after applying puppet to start nginx) with
the call to setup-certbot, which will use the webroot authenticator.
The `setup-certbot --method=standalone` option is left intact, for use
in development environments.
Fixes part of #20593; it does not address installs which were
previously improperly configured with `authenticator = standalone`.
Initialised `this.me` for the TaskData using a constructor to the
current user id.
The bug was caused due to `this.me` never being initialised, and hence
`idx` wasn't incremented on page reload, which resulted in duplicate
`data-key` attributes and hence new todos overwriting older todos with
the same `data-key`
Fixes: #20698
Adds a line break before the descriptive text for return
values and events in the api documentation in order to
help with readability of descriptions with multiple
paragraphs of descriptive text.
Adjustments made to the CSS of list items in unordered
lists to visually group the first paragraph of text
to any following paragraphs or unordered lists.
There was a bug where information overlay was not closing on clicking
"x" when some text was selected. This was due to document.getSelection().type
returning "Range" and we do not close the modal in that case as per the code
added in 081d74141b.
As the "x" icon was button, the document.getSelection().type was
still returning "Range" for the text selected, but when the "x"
icon is inside a span, as in settings overlay, clicking on "x"
deselects the already selected text and selection type is not
"Range" and thus modal is closed.
This commit also improves the vertical alignment of "x".
Fixes#20645.
As a consequence:
• Bump minimum supported Python version to 3.7.
• Move Vagrant environment to Debian 10, which has Python 3.7.
• Move CI frontend tests to Debian 10.
• Move production build test to Debian 10.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Navigation key presses like `Up` and `PageUp` with an empty recipient
boxes will now close the compose and propagate the keypress to the message
list or recent topics, depending upon the active view.
This extends behavior we've had for a long time with focus in the
compose box itself.
Alex Vandiver
N-Shar-ma
Anders Kaseorg
Anders Kaseorg
Alya Abbott
Lauryn Menard
Sahil Batra
Aman Agrawal
Ganesh Pawar