We split recent_topics module into recent_topics_(ui + data + util).
This allows us to reduce cyclical dependencies which were
created due to large list of imports in recent topics. Also, this
refactor on its own makes sense.
`user-profile-modal` is shown using `overlays.open_overlay` which
disables mouse pointer events. The user can't click anywhere while a
modal is present, except to close it.
We use `hide_all_except_sidebars` and `hide_all` to hide popovers.
But since the user can't interact while a modal is present,
closing it manually is redundant.
This commit fixes the invalid assert call in dispatch.js and also fixes the
invalid settings parameter of update_display_settings__default_view_all_messages
fixture in event.js, it should be all_messages instead of 1.
Fixes#18685.
We use css() pretty rarely in our codebase, and
it can sometimes be used mistakenly, when a better
alternative is to toggle a class for external css.
It's hard to support the full API in zjquery, so
we just punt and tell folks to create their own
stubs.
Most of the existing tests that were "fixed" here
weren't actually verifying the behavior of the css()
calls, and for those I just create no-op stubs.
In a few places I verify that css() was called as
expected.
This commit renames `delete_draft_after_send` to
`delete_active_draft` for two main reasons:
1) This function does the job of deleting the draft that we
are currently using in compose box and it is independent
of the message sending functionality.
2) This is prep refactoring for new drafts behavior where
we delete the draft if the compose box is cleared and
closed.
This commit divides the user_invite_restriction setting dropdown to
a checkbox and a dropdown.
The checkbox is used for 'realm_invite_required' setting and dropdown
for 'realm_invite_to_realm_policy'.
This separation of UI elements is fine as these two settings are
separate in database also and also helps in removing excess if-else
conditions and switch cases.
There was a lot of duplicate code in test_sync_realm_settings where
each value in common_policy_values was being tested for different
policies (create_stream_policy and invite_to_stream_policy).
This commit deduplicates is by using a for-loop for testing all
common_policy values and extracting the code as a function to test
different policies.
Previously, we had this complicated layering where the right sidebar
logic would display "Last active: foo" but the user popovers would
just display "foo", which doens't make any sense, since the two
settings have equal context about the string.
We deduplicate that and also arrange that the "Last active:" prefix is
used when it's not clear what we're talking about; i.e. all the values
except for "Active now".
There is no clear reason to not use a button element here. According
to the spec pharasing content, which includes the <span> element,
are allowed in the button element.
Manually tested both buttons to make sure it works and made sure all
the selectors are updated by grepping all the selector classes/id in
the handlebars templates that are parents of the button or are
present on the button.
(One of the jQuery handler code got reformatted due to it fitting
the line limit due to one character deletion for the selector)
This commit fixes a rare flake where it accidentally clicks
on "Subscribe to more streams" instead of "Verona"
(stream). This happens because `#stream_filters` list
was not completely updated, i.e. It still had "Venice" and
"Verona" on the list, when it searched for "ver".
When it decided to click on the "Verona", "Venice"
disappeared, which causes "Verona" to move up and
causing "Subscribe to more streams" to click.
Tested by the adding a console log to the handlers and typing Tab
and Enter in the group PM and stream compose box. This two event
handlers are attached to form#send_message_form which is the compose
box form.
The tests set keyCode to 42 previously, which does not represent a
valid key, so I assume they were trying to test a random key, and
replace it with "a".
There is no functionality change caused by this change. We turn the
event key to lowercase so hotkeys work even when Caps Lock is on as
it did before.
Tested by using the keybinds with and without Caps Lock in compose
box:
- "Ctrl + B" and "Ctrl + Shift + B",
- "Ctrl + I", and
- "Ctrl + Shift + L".
(Also tested that "Ctrl + Shift + I" and "Ctrl + L" do not work.)
Tested by doing the following in the compose box input for PMs:
- "Enter" works as expcected with and without input
- "Backspace" when there is no input deletes the last pill
- Left arrow in the input focuses last pill
- Comma works as expected for correct and incorrect input
- Left arrow, Right arrow and Backspace work correctly for pills.
The Event.which and Event.keyCode are deprecated as pointed out by
TypeScript intellisense based on the jQuery types. We use Event.key
instead which behaves similarly to Event.which & Event.keyCode for
our use case.
The only difference in functionality by this change is that the vim
keys won't work when Caps Lock is on. This is because, in this case,
the key property will be "J" instead of 'j'. We can fix this by
adding a mapping for this, however, I think we don't want to handle
this case so I left this change out. Tested by trying out the
everywhere keydown_util is used.
Finally, we also turn off the new-cap rule for tests since I think
it fine to only enforce it on real code and exempting test code is
fine.
In options that we pass to pill_typeahead.set_up we
specify if we want typeahead to support stream or
user_group pills, and use users as source by default.
Using users for source by default, can have unnecessary
suggestions in typeaheads where only user_groups or streams
are needed.
So to solve that, we specify if we want users pill in the input.
This is then utilized in further commits, to clean up hacky code
that deals with intializing source for typeahead.
We make the typeahead a little more nicer but only showing one alias
per language. For example if the user searches for prefix "j", then
the typeahead list should contain "javascript" only, and not "js" and
"javascript".
We now organize the pygment language codes into meaningful categories
- default, custom and aliases.
Further the `lang.json` list now contains a dataset extracted from the
"language" section of https://insights.stackoverflow.com/survey/2020
and is prioritized based on current language trends.
On slower systems it may take more than 4 seconds for the
stataus message to dissapear from the DOM, so it's better
to wait for the default duration of 30 seconds before
proceeding.
Thanks to @Riken-Shah for suggesting the fix.
Since this is currently only useful to interpret presence data, we
send this only if presence is requested.
I'm not sure that server_timestamp is the right name for this field,
but ultimately it should match the main presence API format.
When quoting a reply or mentioning a person having full name matching
wildcard mention, in such case, `get_mention_syntax` doesn't return
mention syntax of format: **full_name|user_id**.
As a result, a normal user can't mention such users and users who
can mention them may unwillingly trigger wildcard mention.
This commit fixes such issue.
Prior to this, we restricted to show any user group suggestions
if silent mention syntax is used. But with the addition of
user group silent mentions, there are cases where one may want to
refer to some user groups without actually notifying them.
So, we add typeahead logic for such cases.
Test cases for silent syntax (@_*) and non-silent syntax (@*)
are added.
Fixes this KaTeX warning:
Warning: KaTeX doesn't work in quirks mode. Make sure your website has
a suitable doctype.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This is pretty much a verbatim code move,
except that I inlined noop and reset_jquery
in the new file.
Also, in the last test, I no longer reset
the compose state.
We split them in the commit: c50dbf8297
because at that time we thought markdown_katex was gonna
require rewireproxy magic in the later commits.
But we later removed the rewiremock dependency in the
commit: 30c7108955.
So now, we can safely merge `markdown_katex.js` test file
with `markdown.js` test file.
The extracted logic is in linkifier.js.
We have decided to name it linkifier.js instead of realm_linkifier.js
because in future when we will add stream-level linkifiers, we'll
likely want them to be managed by this same file.
I'm not sure that settings UI is particularly worth having puppeteer
tests for, so it's possible we shouldn't bring these back at all. But
in any case, it's worth disabling them as they've been failing for
some time.
This commit solves a rare flake, where the `realm
_linkifier.ts` test was failing because there was no
appropriate wait call for the table
(`#admin_linkifiers_table`) to get updated after editing
the pattern.
The command:
codespell --skip='./locale,*.svg,./docs/translating,postgresql.conf.template.erb,.*fixtures,./yarn.lock,./docs/THIRDPARTY,./tools/setup/emoji/emoji_names.py,./tools/setup/emoji/emoji_map.json,./zerver/management/data/unified_reactions.json' --ignore-words=codespell_ignore_words.txt .
The content of codespell_ignore_words:
```
te
ans
pullrequest
ist
cros
wit
nwe
circularly
ned
ba
ressemble
ser
sur
hel
fpr
alls
nd
ot
```
This tests the basic mechanics of list_cursor
more directly than the activity node tests.
It also sets the stage to eliminate some
tests from activity.js while maintaining
100% coverage on list_cursor.
This is mostly moving tests from activity.js
into user_search.js, but it's not a verbatim
code move.
The new module continues to make sure that
the boundary between activity and user_search
is correct, as most of the testing uses
the configuration of UserSearch from
static/js/activity.js.
It does not use a real buddy_list, though,
which simplifies some tests.
I cleaned up some tests by making sure we
were testing both sides of conditions more
rigorously.
After this change we no longer need the
bloated activity.js tests to maintain full
coverage on static/js/user_search.js.
This commit adds the dropdown in 'Stream settings' section of organization
permissions page to control who can move messages between streams and
also hides the stream-edit UI in message-edit form accordingly.
Fixes#14499.
This commit extracts the logic for testing user_can_invite_others_to_realm
user_can_create_streams, and user_can_subscribe_other_users to a single
function test_policy and this function test_policy is called passing
different policies and validation functions as arguments.
This helps in removing a lot of duplicated code.
This also handles a few other places missed earlier like
narrow headings, beacuse they use the same function.
We already rerender the PM list for events, so there's no
need to do anything special when someone is muted/unmuted.
`people.get_full_names` is now only used in the settings pages
while creating ListWidgets etc, so we add a new test for
it to ensure coverage.
Long ago, we changed Zulip to inspect server-provided topic history in
our compose and search typeahead modules, but did not trigger a query
to the server to fetch data.
This could result in confusing experiences where someone thought that
a topic doesn't exist that just isn't present in recent history.
Once we merge this, we may want to adjust the messaging in typeahead
to advertise that the first option will create a new topic, since this
change may make it feel more like creating topics is a heavyweight
operation.
Fixes#9857.
Previously, the hook to save drafts when closing the compose box was a
focusout on #compose-textarea. This mostly worked, and was essentially
invisible to users (because the animation to notify you about saved
drafts was in the close_compose_ui widget that is hidden), but you'd
end up seeing the tooltip appear (in the wrong place) if you closed
the compose box immediately after sending a message with Tab+Enter.
The correct fix is for the drafts hook to be just before we start
clearing compose box state, inside hide_box.
This was difficult to catch in a development environment, since one
doesn't use that flow with "Enter sends" enabled.
We were apparently not using the ListWidget API for replacing the
content of a widget without removing the whole thing from the DOM and
replacing it.
Unless ListWidget has unexpected bugs, this should have the exact same
result as the previous logic, with much a nicer user experience.
We use styling same as that of the number shown for overflow
(e.g "+3") which has a gray background.
To keep these avatars up-to-date, we need to rerender the
recent topics view after receiving a `muted_users` event.
Also update the user documentation to mention this detail.
We deliberately avoid mentioning "recent topics" because
this applies to mobile too.
This seems more consistent with what users would expect; Recent topics
may be a better default view in general, but if a user has picked
another default view, we should use that where the default view is
desired.
The default label for empty narrows depends on whether it's a
stream/topic narrow or a PMs narrow.
We leave some default text in compose.hbs for reply label
because it take some time for the js to display the
correct label.
The browser seems to autofill the `Name` field of the add-playground
form. Most likely this behavior is a result of value of the `name`
input field being `name`, causing the browser do to something weird
here. This name is now changed to `playground_name`.
Share code between `safe_full_names` and `get_display_full_names`
functions, and rename `safe_full_names` to `get_full_names_for_poll`,
because that was the only place where this was used earlier.
This also has the nice side effect of showing "Muted user" instead
of the muted username in poll results.
The reason for this flake is it missed clicking on the Set
All button (`.subs_set_all_users`) because it calculated
its position before/during it starts scrolling.
There are two scrolling events caused by typing `ot`,
* First is due to internal focus call before typing
which scrolled down the page to bring input in the view.
* Second is after it typed `ot` the user list is updated to
one value, which caused the modal height to decrease rapidly.
Note: It theory, there is three scrolling event,
First is of course internal focus then, after it typed `o`
the list is updated to two values and one is after `t` the
list is updated to a single value.
But as puppeteer is very quick it directly jumped to the
scrolling event after it typed `ot`.
For a more detailed explanation read,
https://chat.zulip.org/#narrow/stream/43-automated-testing/topic/master.20failing/near/1173996.
This commit just temporarily fixes this flake, it's not the
best approach to use time-based delays as they can't be
robust (e.g If the machine is super slow then time-based
delays can fail.).
We don't want to rely on browser hash to check if RT is visible
because soon we want to display default_view without any hash
and RT may or may not be visible in that hash.
Active stream's hash look like this - `#streams/1/announce`
Since the stream_id is present where typically hash section
is for all other hashes, get_current_hash_section should return
the same result.
A modal is added to edit the realm linkifier which
supports ui_report error.
Puppeteer tests to verify linkifier update and an
invalid test to verify that linkifier error messages
are reported on the modal are added as well.
Previously, we used to hide 1:1 PMs with muted users everywhere
in the UI. This commit makes it so that such messages will now be
visible in `pm-with/<muted_user>` narrows, meaning these will not
be excluded from message lists, but will still be hidden under
the "This message was hidden." dialog implemented earlier.
* We hide 1:1 PMs from and to muted users throughout
the UI, because doing so will not lead to loss of
conversational context. The "to" part is also important,
because the last few messages sent to a user before
muting them would probably be asking them to stop
spamming.
* After this change, we will need to do filtering for either
user or topic muting in pretty much all narrows, so we need
to keep the `_all_items` list in MessageListData always
up-to-date.
* A further commit will relax this and make it possible to
view these messages only when in a `pm-with/muted_user`
narrow.
This basically reverts 4bd7ec7c36 and
3a9dfc02e6.
The plan earlier was to have compeletely different codepaths
for user and topic muting, so that we could call seperate
functions in the message list class on receiving the respective
events.
However, this cannot be done, because if we, for example, on
receiving a `muted_users` event, filter `_all_items` based on
just user mutes, and store the result in `_items`, then, that
result may still contain topic-muted messages, which is
undesirable. Hence whenever we filter messages, we must do so
based on both user as well as topic muting.
(The code for the former will be added in further commits.)
So, we will have a single function which will handle updating
the message lists for muting.
These mock objects did not buy any ease in testing, as
evident from the fact that this commit hardly contains
any changes to the tests themselves.
This commit also removes some unnecessary `filter: undefined`,
parameters sent to MessageList constructor.
Add a function which is called before every render to
get the number of items it can render. This can be used by
instance to load custom number of items as per its state.
We allow ListWidget instances to pass functions in opts that can
be called after scrolling to determine when to render.
Also, allow a callback function to be called pre render.
We move compose from being a part of message feed to
being a part of middle column which is a common parent of recent
topics and message feed. This allows us to use a common compose
box for both the views. Fortunately, compose actions were
independent of this change so there weren't any evident
side effects.
Fixes#17543
This corner case was reported in #17320, basically, the
issue was when two or more alert words were used
consecutively with a single space between them, it didn't
detect the even number word as `alert word`.
This button will allow users to avoid a distracting red banner across
their screen, while they wait for their sysadmin to do the upgrade
work.
Fixes: #18359
Since we don't process private messages yet, we don't
need to re-render when we receive a new private message
as it doesn't change any data related to recent_topics.
This will allow us to avoid duplication of array filtering
logic of the form-
`Array.filter((user_id) => !muting.is_user_muted(user_id))` and
`Array.filter((person) => !muting.is_user_muted(person.user_id))`
We want to exclude 1:1 PMs from muted users everywhere
except in `pm-with/<muted_user>`.
This method will help us determine whether we are in such
a narrow.
* We show a "Click here to reveal." hyperlink in the hidden
message dialog for user to click on and read a hidden message.
* The "reveal" action is temporary, in the sense that a revealed
message will again be hidden once the broswer tab reloads or
if the user renarrows.
* When a message is revealed, we make sure to show the sender
of that message, even if it isn't the first message of it's group.
This is because the first message of that message group (which
would have otherwise shown the sender) can still be hidden.
* Reactions and background color after revealing a message are
the same as if the message hadn'e been hidden at all in the
first place.
* We hide the sender and reactions on messages sent by muted
users, and replace the content with a "This message was hidden"
dialog.
* Ideally, we should collapse a series of consequetive
messages sent by muted users into one such dialog, but
that could break the cursor behaviour and `near/<message_id`
links, so we as of now show one dialog per muted message.
* Because we hide the sender, there is a chance of the first
hidden message in a group looking like it was sent by the
author of the message above it. To tackle this, we intentionally
make the hidden message dialog float-left, so that it is clear
that this is a special type of message.
* For context, we still show the timestamp of the message.
* Starring, editing, deleting etc a message still work just like
before.
A further commit will add the ability to reveal a
hidden message.
We also add a check to see if `message_feed_container` is visible,
since it is possible that recent topics could be visible which
was not a possibility when this logic was written.
The 'reply' button shows the stream>topic or recipient(s) of the
selected message, for better UX. It also expands to fill the
remaining horizontal space in the button bar -- this should help make
it easier for new users to figure out how to reply.
Finally, it uses "Message" instead of "Reply", to better match the
compose box.
Fixes#17940.
This test was wrong, in that it checked for the English status string
when the current language was expected to be German; this happened to
work until now because with i18next we were failing to include the
string in question in our translation data; and early today I did the
first translation data sync since our translators had translated that
string for German.
Replacing the group PMs icon with "fa fa-group" icon
drops the color class "fraction_present" logic. As there
is no more use of fraction_present class this commit
cleanups its all existence from the codebase.
As of now, editing a widget doesn't update the rendered content.
It's important to ensure that existing votes or options added later on
don't get deleted when rendered.
This seems more complex than it's worth.
For now, we just prevent edits to widgets.
This commit makes the UI clearer that editing widgets isn't allowed.
See also:
https://github.com/zulip/zulip/issues/14229https://github.com/zulip/zulip/issues/14799Fixes#17156
This commit fixes a rare flake which was most probably
caused when we clicked on the `Check All` button, and
we instantly cleared the filter when it was still marking
the user `checked`, which nullified the effect of clicking
on `Check All` button.
Currently, when there are some old starred messages
in a topic, it is possible that some of them won't be
unstarred on doing "Unstar all messages in topic".
This happens when those messages haven't been fetched
yet from the server, and we have no way to verify if
they actually belong to the topic.
This commit fixes that by changing this mechanism to
first fetch all starred messages in the topic from
the server, and then send their IDs back to the backend
to unstar them.
While doing this, we assume that the user does not
have more than 1000 starred messages in that topic.
Note that, we still depend on the local data to
decide whether or not the "Unstar all messages in
topic" option should be shown in the topic popover.
A method similar to the above cannot be used here, because
making server requests before opening the popover
could visually slow down the popover opening.
Using local data for the topic popover would probably
not be a big problem, because users would want to
unstar all messages in a topic probably after noticing
that there are a lot of them, meaning there was at least
one starred message from that topic which was already
fetched, which is sufficient for us to conclude that
we need to show the option in the topic popover.
Fixes#17790
This logic is already thoroughly tested in node tests for
the `MessageListData` class, and the `unmuted_messages`
method of `MessageList` only directly call the corresponding
method of the data class.
We hide a conversation from the top-left corner PM list if
it is-
* A 1:1 PM where the other user has been muted, or
* Huddle where all users have been muted.
* Extract out data as common variable so that it can
be reused in other tests in the future.
* Use consistent dummy user_ids across tests.
* Expand the data set to cover all possible cases-
- 1:1 PMs
- Huddles
- PMs with self
This commit adds code for live updating the role field of person
object on receiving role change event from server and thus enables
live update of role in users list of settings overlay.
This commit adds code to live update page_params.is_moderator and
person.is_moderator on receiving role change event.
The code for changing role to moderator and from moderator to any
other role was added in previous commit.
This commit modifies the code to show "Moderator" correctly for
realm moderators.
As, we show role using settings_config.user_role_values object and
the same is used for showing options in changing role dropdown, this
commit also adds the moderator option in that dropdown and thus allows
the user to change role to moderator and from moderator to any other
role from frontend.
But the code for live updating page_params.is_moderator and
person.is_moderator will be in further commit.
This commit adds 'admins and moderators' option in frontend for
invite_to_realm_policy.
The logic for moderator for checking whether user is allowed to invite
others or not was added in previous commit as we use common helper
user_has_permission for all policies.
But the test user_can_invite_others_to_relam is updated for including
moderator role in this commit.
Since, we now get role value in person objects sent from server, we
can simply user user_role_map to display role in different places
instead of having multiple if-else conditions to check flags like
is_admin, is_guest, etc.
This commit modifies the user objects returned by 'GET /users',
'GET /users/me', 'GET /users/{user_id}' and 'GET /users/{email}'
endpoints to include role field.
We also include role field in the page_params['realm_users'] dict
and in the person object sent in (type="realm_user", op="add")
event.
This help mobile and terminal clients understand whether a server
restart changed API feature levels or not, which in turn determines
whether they will need to resynchronize their data.
Also add tests and documentation for this previously undocumented
event type.
Fixes: #18205.
There were some changes that were lost/added by mistake
during a rebase of #17707 after #18154 was merged.
Fixes the GIF icon being hidden / displayed incorrectly
with respect to the settings.
These changes were originally part of
67527a2517 but
were lost during the rebase.
This commit adds 'user_can_create_streams' helper which is
used to check whether user can create streams or not and
replaces all the instances of 'page_params.can_create_streams'.
This change helps us to remove the complex logic of updating
'page_params.can_create_streams' for 'realm_update' event in
'server_events_dispatch.js', as we will always get the updated
values from the added helper for checking whether the users can
create streams or not.
This commit adds 'user_can_subscribe_other_users' helper in
settings_data.js amd this helper will replaced all the
instances of page_params.can_subscribe_other_users.
We also remove the incorrect code in server_events_dispatch.js
where we were updating page_params.can_invite_to_stream which
is actually not used in other parts of code and instead of it
page_params.can_subscribe_other_users is used to check whether
user is allowed to subscribe others or not. This code was
added in 272ed9068.
Though this could have been done in a different commit, but as
we are adding the code to use the correct updated value in this
commit only, this has been fixed here.
There is also no need of adding that complex logic to update the
correct 'page_params.can_subscribe_other_users' field on
'realm_update' event, as we are using user_can_subscribe_other_users
helper and thus we always use the updated values to check whether
the user is allowed to subscribe others or not.
This commit adds 'user_can_invite_others_to_realm' function
in settings_data.js which replaces all the instances of
'page_params.can_invite_others_to_realm'.
This change makes it possible to remove the complex logic of
updating 'page_params.can_invite_others_to_realm' on
'realm_update' event as we are using above added helper instead
of using page_params object and thus we always use the updated
value to check whether user can invite others or not.
The 'user_has_permission' helper will be used by functions added
for create_stream_policy and invite_to_stream_policy in further
commits and will help in avoiding code duplication.
This commit replaces different objects - create_stream_policy_values,
invite_to_realm_policy_values and invite_to_stream_policy_values,
with a single object common_policy_values.
Though invite_to_realm_policy do not use other fields of objects like
description, order, etc. but we can keep it as it is for now as we
would separate this setting from "Are invitations required...."
dropdown and these fields will be used then.
This is a prep commit for commits that will add helper functions in
settings_data for these policies replacing the usage of page_params
object.
This prevents the regex from requiring multiple spaces between
adjacent alert words by using lookahead and lookbehind (rather than
the before/after checks each needing to eat a whitespace character) so
that consecutive alert words (if any) can be highlighted.
With a frontend test covering adjacent corner cases by tabbott.
Fixes#17320
This extends the /json/typing endpoint to also accept
stream_id and topic. With this change, the requests
sent to /json/typing should have these:
* `to`: a list set to
- recipients for a PM
- stream_id for a stream message
* `topic`, in case of stream message
along with `op`(start or stop).
On receiving a request with stream_id and topic, we send
typing events to clients with stream_typing_notifications set
to True for all users subscribed to that stream.
Previously, we used to do a kind of "local echo"
whenever the user muted/unmuted a topic. Meaning,
we used to do most of the UI update work before making
the API call to mute the topic, instead of after
receiving the `muted_topics` event. This behavior
has been so since the beginning of time
(b4b6fa14d3) and isn't ideal because:
1. If the request fails on the backend, the UI
could end up in an incorrect state.
2. Adds code complexity.
3. Makes it difficult to catch bugs related to
live-update (like the one fixed by
f725711ff2).
4. Isn't consistent with other parts of the
codebase, which do the UI update while handling
events.
This commit makes it so that all the UI update
work is done only after recieving the `muted_topics`
event.
The only possible issue with this strategy could
be users sending another duplicate request in the small
time span before receiving the event. But that isn't
a big problem, because all requests involved here are
idempotent, and the worst that can happen is a HTTP 400.
Steve Howell
Aman Agrawal
Ganesh Pawar
Riken Shah
Anders Kaseorg
aryanshridhar
m-e-l-u-h-a-n
Palash Raghuwanshi
sahil839
Tim Abbott
Priyank Patel
Vishnu KS
Sumanth V Rao
akshatdalton
rht
Abhijeet Prasad Bodas
Ken Clary
Nikhil Maske
im-adithya
Dinesh