We add a new wildcard_mention_policy setting to handle wildcard
mentions in large streams, with a wide range of policies available to
organizations.
We set the default to the safe option for preventing accidental spam:
only stream administrators being able to use wildcard mentions in
large streams.
We now no longer define any schemas in test_events--all
of them are in event_schema, which helps our tooling
cross-check schemas for openapi and node tests.
It happens that whether you add a reaction or remove
a reaction, we send the exact same fields, just using
a different op code.
This sort of symmetry is actually kind of rare, as
usually "add" events have more fields, and "remove" events
might just send an id of something to remove.
Our openapi schema treats these as two seperate events,
so we are more consistent with it, and it helps our
schema-checking tooling for node fixtures, too.
Note that we now have to exempt the two events from
our openapi checks, due to the is_mirror_dummy field
in the deprecated user block. We can decide how to
handle this later--one possibility is to just add it
as an optional field on the event_schema side.
Note that we use value_type for value instead of
bool, since properties can be non-bool things
like color, which we just don't test now. We
should test them.
We more than compensate for this by checking
the actual value of the value in
check_subscription_update.
There is a legacy format where we send
singular "message_id" instead of plural
"message_ids".
Then there are different fields for "private"
and "stream" message types.
Note that we make the schema for profile_data
slightly more realistic, but it doesn't actually get
exercised by our current tests (apart from
making sure it's a dict), since we don't have
profile data for our test realm.
We also don't have the optional fields for bots,
since our tests don't exercise that, nor
delivery_email.
So we exempt realm_user_add_event from openapi
checks for now.
When we try to match the openapi specs better, we
will probably want to add a few tests to test_events.
Obviously getting good coverage for adding users
would be nice for all these scenarios:
* delivery_email matters
* bots
* realm has profile fields
This also forces us to create TupleType.
We exempt this from the openapi check,
since we haven't figured out how to model
tuples in openapi with the same precision
as event_schema (and it may be impossible).
Long term we just want to stop dealing in
tuples, of course.
We also make our schema in event_schema reflect this,
which in turn makes us match the already accurate
openapi spec, so we no longer need to exempt four
types of events from our sanity checks.
The `typing: stop` event did not have any tests in test_events
hence its documentation wasn't added. So add tests and relevant
documentation for the typing stop event. Also edit the documentation
of `typing: start` to include the fact that servers should use
their own timeout incase `stop` event event isn't received.
Fixes#16122.
The original commit was broken here:
b553507412
The intention was to run the same loop for all
settings, but instead, we did a funny loop of
just resetting schema_checker, and then we only
actually tested the last value of the loop.
In f8bcf39014, we fixed buggy
marshalling of Streams and similar data structures where we were
including the Stream object rather than its ID in dictionaries passed
to ujson, and ujson happily wrote that large object dump into the
RealmAuditLog.extra_data field.
This commit includes a migration to fix those corrupted RealmAuditLog
entries, and because the migration loop is the same, also fixes the
format of similar RealmAuditLog entries to be in a more natural format
that doesn't weirdly nest and duplicate the "property" field.
Fixes#16066.
Use `ujson.loads(ujson.dumps())` wrapper on events sent for OpenAPI
testing so that all tuples are converted into arrays as tuples aren't
valid in JSON.
Edit the function `validate_against_openapi_schema` and add some
helper functions to allow for validation of documented events.
Also add OpenAPI response validation in `verify_action` as it is
called in a large number of `/events` tests.
We also have the caller pass in the property name for an
additional sanity check.
Note that we don't yet handle the possibility of extra_data;
that will be a subsequent commit.
Also, the stream_id fields aren't in Realm.property_types,
so we specify their types in the checker.
This a pretty big commit, but I really wanted it
to be atomic.
All realm_user/update events look the same from
the top:
_check_realm_user_update = check_events_dict(
required_keys=[
("type", equals("realm_user")),
("op", equals("update")),
("person", _check_realm_user_person),
]
)
And then we have a bunch of fields for person that
are optional, and we usually only send user_id plus
one other field, with the exception of avatar-related
events:
_check_realm_user_person = check_dict_only(
required_keys=[
# vertical formatting
("user_id", check_int),
],
optional_keys=[
("avatar_source", check_string),
("avatar_url", check_none_or(check_string)),
("avatar_url_medium", check_none_or(check_string)),
("avatar_version", check_int),
("bot_owner_id", check_int),
("custom_profile_field", _check_custom_profile_field),
("delivery_email", check_string),
("full_name", check_string),
("role", check_int_in(UserProfile.ROLE_TYPES)),
("email", check_string),
("user_id", check_int),
("timezone", check_string),
],
)
I would start the code review by just skimming the changes
to event_schema.py, to get the big picture of the complexity
here. Basically the schema is just the combined superset of
all the individual schemas that we remove from test_events.
Then I would read test_events.py.
The simplest diffs are basically of this form:
- schema_checker = check_events_dict([
- ('type', equals('realm_user')),
- ('op', equals('update')),
- ('person', check_dict_only([
- ('role', check_int_in(UserProfile.ROLE_TYPES)),
- ('user_id', check_int),
- ])),
- ])
# ...
- schema_checker('events[0]', events[0])
+ check_realm_user_update('events[0]', events[0], {'role'})
Instead of a custom schema checker, we use the "superset"
schema checker, but then we pass in the set of fields that we
expect to be there. Note that 'user_id' is always there.
So most of the heavy lifting happens in this new function
in event_schema.py:
def check_realm_user_update(
var_name: str, event: Dict[str, Any], optional_fields: Set[str],
) -> None:
_check_realm_user_update(var_name, event)
keys = set(event["person"].keys()) - {"user_id"}
assert optional_fields == keys
But we still do some more custom checks in test_events.py.
custom profile fields: check keys of custom_profile_field
def test_custom_profile_field_data_events(self) -> None:
+ self.assertEqual(
+ events[0]['person']['custom_profile_field'].keys(),
+ {"id", "value", "rendered_value"}
+ )
+ check_realm_user_update('events[0]', events[0], {"custom_profile_field"})
+ self.assertEqual(
+ events[0]['person']['custom_profile_field'].keys(),
+ {"id", "value"}
+ )
avatar fields: check more specific types, since the superset
schema has check_none_or(check_string)
def test_change_avatar_fields(self) -> None:
+ check_realm_user_update('events[0]', events[0], avatar_fields)
+ assert isinstance(events[0]['person']['avatar_url'], str)
+ assert isinstance(events[0]['person']['avatar_url_medium'], str)
+ check_realm_user_update('events[0]', events[0], avatar_fields)
+ self.assertEqual(events[0]['person']['avatar_url'], None)
+ self.assertEqual(events[0]['person']['avatar_url_medium'], None)
Also note that avatar_fields is a set of four fields that
are set in event_schema.
full name: no extra work!
def test_change_full_name(self) -> None:
- schema_checker('events[0]', events[0])
+ check_realm_user_update('events[0]', events[0], {'full_name'})
test_change_user_delivery_email_email_address_visibilty_admins:
no extra work for delivery_email
check avatar fields more directly
roles (several examples) -- actually check the specific role
def test_change_realm_authentication_methods(self) -> None:
- schema_checker('events[0]', events[0])
+ check_realm_user_update('events[0]', events[0], {'role'})
+ self.assertEqual(events[0]['person']['role'], role)
bot_owner_id: no extra work!
- change_bot_owner_checker_user('events[1]', events[1])
+ check_realm_user_update('events[1]', events[1], {"bot_owner_id"})
- change_bot_owner_checker_user('events[1]', events[1])
+ check_realm_user_update('events[1]', events[1], {"bot_owner_id"})
- change_bot_owner_checker_user('events[1]', events[1])
+ check_realm_user_update('events[1]', events[1], {"bot_owner_id"})
timezone: no extra work!
- timezone_schema_checker('events[1]', events[1])
+ check_realm_user_update('events[1]', events[1], {"email", "timezone"})
Obviously, this file will soon grow--this
was the easiest way to start without introducing
noise into other commits.
It will soon be structurally similar
to frontend_tests/node_tests/lib/events.js--I
have some ideas there. But this should also
help for things like API docs.
We add the ability to supply optional_keys,
and we don't mutate the list of required
keys that gets passed into us.
We also enforce that there is a "type"
field.
(We will use optional_keys soon.)
This commit verify that error logging while testing data export in
test_notify_realm_export_on_failure using assertLogs so that the logs
do not spam test output.
A few major themes here:
- We remove short_name from UserProfile
and add the appropriate migration.
- We remove short_name from various
cache-related lists of fields.
- We allow import tools to continue to
write short_name to their export files,
and then we simply ignore the field
at import time.
- We change functions like do_create_user,
create_user_profile, etc.
- We keep short_name in the /json/bots
API. (It actually gets turned into
an email.)
- We don't modify our LDAP code much
here.
Log RealmAuditLog in do_set_realm_property and do_remove_realm_domain.
Tests for the changes are written in test_events because it will save
duplicate code for test_change_realm_property.
According to @showell:
> All the slow decorators can die. That was a failed experiment of
> mine from 2014 days. I have meaning to kill them for a couple years
> now. I wrote this with the best of intentions, but I believe it's
> now just cruft. We never made a "fast" mode, for one. And we kept
> writing more and more slow tests, haha.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
I also fix the code formatting so it's more
considerate of folks that have smaller monitors
or do side-by-side editing. And it's more
diff friendly as well.
I want to avoid creating the same scheme checkers
for multiple tests, and it's easiest to create the
schema checkers at module scope (and we possibly
even move them to another file eventually).
This will allow us to more easily instrument our
code to find duplicate schemas.
The goal here is to make test_events.py be
primarily focused on testing specific actions
and then validating:
- schemas
- apply_events logic
Then the new module here is a bit of a
kitchen sink of old tests, although it's
primarily focused on the actual mechanics
of the event system:
- logging
- register
- queue_ids
- fetching initial state
- client descriptors
The classes toward the bottom arguably
should go into more feature-specific
test modules, but the main goal now is
to purify test_events.py. (We may eventually
want to rename test_events.py to something
more like test_action_events.py, but the
current name has some doc references and
tribal knowledge around it.)
There is still some miscellaneous cleanup that
has to happen for things like analytics queries
and dead code in node tests, but this should
remove the main use of pointers in the backend.
(We will also still need to drop the DB field.)
This commit is first of few commita which aim to change all the
bugdown references to markdown. This commits rename the files,
file path mentions and change the imports.
Variables and other references to bugdown will be renamed in susequent
commits.
Change variable `name` to `date_sent` as `name` actually stores
the date sent. Also change the data types of `name` and `create_time`
to integer. As they actually have empty decimal value.
This avoids some code duplication as well
as adding some missing fields.
We also use check_dict_only to prevent
folks from adding new fields to the
relevant events without updating these
tests. (A bigger sweep comes later.)
As the code comment indicates, we just
use a strict check here rather than
pretending that the test exercises a
more complicated schema for the config
data, which is dynamic in nature.
Cleaning up config_data is outside the
scope of this PR; my main goal is to
eliminate check_dict calls (usually in favor
of check_dict_only).
Because of other validation on these values, I don't believe any of
these does anything different, but these changes improve readability
and likely make GitHub's code scanners happy.
We now have our muted topics use tuples internally,
which allows us to tighten up the annotation
for get_topic_mutes, as well as our schema
checking.
We want to deprecate sub_validator=None
for check_list, so we also introduce
check_tuple here. Now we also want to deprecate
check_tuple, but it's at least isolated now.
We will use this for data structures that are tuples,
but which are sent as lists over the wire. Fortunately,
we don't have too many of those.
The plan is to convert tuples to dictionaries,
but backward compatibility may be tricky in some
places.
With this implementation of the feature of the automatic theme
detection, we make the following changes in the backend, frontend and
documentation.
This replaces the previous night_mode boolean with an enum, with the
default value being to use the prefers-color-scheme feature of the
operating system to determine which theme to use.
Fixes: #14451.
Co-authored-by: @kPerikou <44238834+kPerikou@users.noreply.github.com>
Old: a validator returns None on success and returns an error string
on error.
New: a validator returns the validated value on success and raises
ValidationError on error.
This allows mypy to catch mismatches between the annotated type of a
REQ parameter and the type that the validator actually validates.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Two things were broken here:
* we were using name(s) instead of id(s)
* we were always sending lists that only
had one element
Now we just send "stream_id" instead of "subscriptions".
If anything, we should start sending a list of users
instead of a list of streams. For example, see
the code below:
if peer_user_ids:
for new_user_id in new_user_ids:
event = dict(type="subscription", op="peer_add",
stream_id=stream.id,
user_id=new_user_id)
send_event(realm, event, peer_user_ids)
Note that this only affects the webapp, as mobile/ZT
don't use this.
This adds a new client_capability that clients such as the mobile apps
can use to avoid unreasonable network bandwidth consumed sending
avatar URLs in organizations with 10,000s of users.
Clients don't strictly need this data, as they can always use the
/avatar/{user_id} endpoint to fetch the avatar if desired.
This will be more efficient especially for realms with
10,000+ users because the avatar URLs would increase the
payload size significantly and cost us more bandwidth.
Fixes#15287.
This commit adds backend support for setting message_retention_days
while creating streams and updating it for an existing stream. We only
allow organization owners to set/update it for a stream.
'message_retention_days' field for a stream existed previously also, but
there was no way to set it while creating streams or update it for an
exisiting streams using any endpoint.
Google has removed the Google Hangouts brand, thus we are removing
them as video chat provider option.
This commit removes Google Hangouts integration and make a migration
that sets all realms that are using Hangouts as their video chat
provider to the default, jitsi.
With changes by tabbott to improve the overall video call documentation.
Fixes: #15298.
This commit removes is_old_stream property from the stream objects
returned by the API. This property was unnecessary and is essentially
equivalent to 'stream_weekly_traffic != null'.
We compute sub.is_old_stream in stream_data.update_calculated_fields
in frontend code and it is used to check whether we have a non-null
stream_weekly_traffic or not.
Fixes#15181.
Fixes#15285
This event will be used more now for guest users when moving
topic between streams (See #15277). So, instead of deleting
messages in the topic as part of different events which is
very slow and a bad UX, we now handle the messages to delete in
bulk which is a much better UX.
This is designed to have no user-facing change unless the client
declares bulk_message_deletion in its client_capabilities.
Clients that do so will receive a single bulk event for bulk deletions
of messages within a single conversation (topic or PM thread).
Backend implementation of #15285.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Option to disable breadcrumb messages were given in both message edit
form and topic edit stream popover.
User now has the option to select which stream to send the notification
of stream edit of a topic via checkboxes in the UI.
This reimplements our Zoom video call integration to use an OAuth
application. In addition to providing a cleaner setup experience,
especially on zulipchat.com where the server administrators can have
done the app registration already, it also fixes the limitation of the
previous integration that it could only have one call active at a time
when set up with typical Zoom API keys.
Fixes#11672.
Co-authored-by: Marco Burstein <marco@marco.how>
Co-authored-by: Tim Abbott <tabbott@zulipchat.com>
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
This commit changes the person dict in event sent by do_change_user_role
to send role instead of is_admin or is_guest.
This makes things much more straightforward for our upcoming primary
owners feature.
mock is just a backport of the standard library’s unittest.mock now.
The SAMLAuthBackendTest change is needed because
MagicMock.call_args.args wasn’t introduced until Python
3.8 (https://bugs.python.org/issue21269).
The PROVISION_VERSION bump is skipped because mock is still an
indirect dev requirement via moto.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit merges do_change_is_admin and do_change_is_guest to a
single function do_change_user_role which will be used for changing
role of users.
do_change_is_api_super_user is added as a separate function for
changing is_api_super_user field of UserProfile.
I'm not sure exactly what series of history got us here, but we were
fetching the mobile_user_ids data for all users in the organization,
regardless of whether they were recently active (and thus relevant for
the main presence data set). And doing so in a sloppy fashion
(sending every user ID over the wire, rather than just having the
database join on Realm).
Fixing this saves a factor of 4-5 on the total runtime of a presence
request on organizations with 10Ks of users like chat.zulip.org; more
like 25% in an organization with 150. Since large organizations are
very heavily weighted in the overall cost of presence, this is a huge
win.
Fixes part of #13734.
The `email` field for identifying the user being modified in these
events was not used by either the webapp or other official Zulip
clients. Instead, it was legacy data from before we switched years
ago to sending user_id fields as the correct way to uniquely identify
a user.
When a user changes its avatar image, the user's avatar in popovers
wasn't being correctly updated, because of browser caching of the
avatar image. We added a version on the request to get the image in
the same format we use elsewhere, so the browser knows when to use the
cached image or to make a new request to the server.
Edited by Tim to preserve/fix sort orders in some tests, and update
zulip_feature_level.
Fixes: #14290
We remove the `owner` field from `page_params/realm_bots`
and bot-related events.
In the recent commit 155f6da8ba
we added `owner_id`, which we now use everywhere we need
bot owners for.
We also bump the `API_FEATURE_LEVEL` to 5 here. We
had already documented this in the prior commit to
add `owner_id`.
Note that we don't have to worry about mobile/ZT clients
here--we only deal with bot data in the webapp.
For the below payloads we want `owner_id` instead
of `owner`, which we should deprecate. (The
`owner` field is actually an email, which is
not a stable key.)
page_params.realm_bots
realm_bot/add
realm_bot/update
IMPORTANT NOTE: Some of the data served in
these payloads is cached with the key
`bot_dicts_in_realm_cache_key`.
For page_params, we get the new field
via `get_owned_bot_dicts`.
For realm_bot/add, we modified
`created_bot_event`.
For realm_bot/update, we modified
`do_change_bot_owner`.
On the JS side, we no longer
look up the bot's owner directly in
`server_events_dispatch` when we get
a realm_bot/update event. Instead, we
delegate that job to `bot_data.js`.
I modified the tests accordingly.
It's a preliminary step to enable message_retention_setting in org settings
UI, which is a non-limited plan only feature. So we require a page_param
property that tells us the limited-plan state of the Zulip realm.
Prior to this change, there were reports of 500s in
production due to `export.extra_data` being a
Nonetype. This was reproducible using the s3
backend in development when a row was created in
the `RealmAuditLog` table, but the export failed in
the `DeferredWorker`. This left an entry lying
about that was never updated with an `extra_data`
field.
To fix this, we catch any exceptions in the
`DeferredWorker`, and then update `extra_data` to
encode the failure. We also fix the fact that we
never updated the export UI table with pending exports.
These changes also negated the use for the somewhat
hacky `clear_success_banner` logic.
Previously, alert words were a JSON list of strings stored in a
TextField on user_profile. That hacky model reflected the fact that
they were an early prototype feature.
This commit migrates from that to a separate table, 'AlertWord'. The
new AlertWord has user_profile, word, id and realm(denormalization so
we can provide a nice index for fetching all the alert words in a
realm).
This transition requires moving the logic for flushing the Alert Words
caches to their own independent feature.
Note that this commit should not be cherry-picked without the
following commit, which fixes case-sensitivity issues with Alert Words.
Previously, the message and event APIs represented the user differently
for the same reaction data. To make this more consistent, I added a
user_id field to the reaction dict for both messages and events. I
updated the front end to use the user_id field rather than the user
dict. Lastly, I updated front end and back end tests that used user
info.
I primarily tested this by running my local Zulip build and
adding/removing reactions from messages.
Fixes#12049.
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This adds a new realm setting: default_code_block_language.
This PR also adds a new widget to specify a language, which
behaves somewhat differently from other widgets of the same
kind; instead of exposing methods to the whole module, we
just create a single IIFE that handles all the interactions
with the DOM for the widget.
We also move the code for remapping languages to format_code
function since we want to preserve the original language to
decide if we override it using default_code_clock_language.
Fixes#14404.
This commit reuses the existing infrastructure for moving a topic
within a stream to add support for moving topics from one stream to
another.
Split from the original full-feature commit so that we can merge just
the backend, which is finished, at this time.
This is a large part of #6427.
The feature is incomplete, in that we don't have real-time update of
the frontend to handle the event, documentation, etc., but this commit
is a good mergable checkpoint that we can do further work on top of.
We also still ideally would have a test_events test for the backend,
but I'm willing to leave that for follow-up work.
This appears to have switched to tabbott as the author during commit
squashing sometime ago, but this commit is certainly:
Co-Authored-By: Wbert Adrián Castro Vera <wbertc@gmail.com>
We don't need `do_create_user` to send a partial
event here for bots. The only caller to `do_create_user`
that actually creates bots (apart from some tests that
just need data setup) is `add_bot_backend`, which
sends the more complete event including bot "extras"
like service info.
The modified event tests show the simplification
here (2 events instead of 3).
Also, the bot tests now use tuple unpacking, which
will force a ValueError if we duplicate events
again.
We try to use the correct variation of `email`
or `delivery_email`, even though in some
databases they are the same.
(To find the differences, I temporarily hacked
populate_db to use different values for email
and delivery_email, and reduced email visibility
in the zulip realm to admins only.)
In places where we want the "normal" realm
behavior of showing emails (and having `email`
be the same as `delivery_email`), we use
the new `reset_emails_in_zulip_realm` helper.
A couple random things:
- I fixed any error messages that were leaking
the wrong email
- a test that claimed to rely on the order
of emails no longer does (we sort user_ids
instead)
- we now use user_ids in some place where we used
to use emails
- for IRC mirrors I just punted and used
`reset_emails_in_zulip_realm` in most places
- for MIT-related tests, I didn't fix email
vs. delivery_email unless it was obvious
I also explicitly reset the realm to a "normal"
realm for a couple tests that I frankly just didn't
have the energy to debug. (Also, we do want some
coverage on the normal case, even though it is
"easier" for tests to pass if you mix up `email`
and `delivery_email`.)
In particular, I just reset data for the analytics
and corporate tests.
If I send a message from a normal Zulip client, it is
considered to be "read" by me. But if I send it via
an API program (using my human account), the message
is not immediately "read" by me.
Now we handle this correctly in `get_raw_unread_data`.
The symptom of this was that these messages would get
"stuck" in "Private Messages" narrows until the next
time you reloaded your app.
We now have this API...
If you really just need to log in
and not do anything with the actual
user:
self.login('hamlet')
If you're gonna use the user in the
rest of the test:
hamlet = self.example_user('hamlet')
self.login_user(hamlet)
If you are specifically testing
email/password logins (used only in 4 places):
self.login_by_email(email, password)
And for failures uses this (used twice):
self.assert_login_failure(email)
This reduces query counts in some cases, since
we no longer need to look up the user again. In
particular, it reduces some noise when we
count queries for O(N)-related tests.
The query count is usually reduced by 2 per
API call. We no longer need to look up Realm
and UserProfile. In most cases we are saving
these lookups for the whole tests, since we
usually already have the `user` objects for
other reasons. In a few places we are simply
moving where that query happens within the
test.
In some places I shorten names like `test_user`
or `user_profile` to just be `user`.
This commit mostly makes our tests less
noisy, since emails are no longer an important
detail of sending messages (they're not even
really used in the API).
It also sets us up to have more scrutiny
on delivery_email/email in the future
for things that actually matter. (This is
a prep commit for something along those
lines, kind of hard to explain the full
plan.)
For historical reasons we were creating Recipient
objects at some point in the typing-notifications
codepath. Now we just work with UserProfiles.
This removes some queries, as indicated by
the change to `len(queries)` in a couple of the
tests.
The one subtle thing that changes here is huddles.
If user 10 sends a typing notification that they
are talking to users 20 and 30, there might not
actually be a huddle for users 10/20/30, but
we were actually creating huddles on the fly!
There is no need to create huddles just for
typing notifications, since we don't even
share huddle ids with our clients. The clients
just infer the huddles.
Some of the code that gets killed off here as
somewhat "collateral damage" is some
defensive code related to formerly supporting streams
in typing indicators. The support for streams
was killed off almost as soon as we released
the feature, and the codepath is pretty clearly
user-centric at this point.
The only clients that should use the typing
indicators endpoint are our internal clients,
and they should send a JSON-formatted list
of user_ids.
Unfortunately, we still have some older versions
of mobile that still send emails.
In this commit we fix non-user-facing things
like docs and tests to promote the user_ids
interface that has existed since about version
2.0 of the server.
One annoyance is that we documented the
typing endpoint with emails, instead of the
more modern user_ids, which may have delayed
mobile converting to user_ids (and which
certainly caused confusion). It's trivial
to update the docs, but we need to short
circuit one assertion in the openapi tests.
We also clean up the test structure for the
typing tests:
TypingHappyPathTest.test_start_to_another_user
TypingHappyPathTest.test_start_to_multiple_recipients
TypingHappyPathTest.test_start_to_self
TypingHappyPathTest.test_start_to_single_recipient
TypingHappyPathTest.test_stop_to_another_user
TypingHappyPathTest.test_stop_to_self
TypingValidateOperatorTest.test_invalid_parameter
TypingValidateOperatorTest.test_missing_parameter
TypingValidateUsersTest.test_argument_to_is_not_valid_json
TypingValidateUsersTest.test_bogus_user_id
TypingValidateUsersTest.test_empty_array
TypingValidateUsersTest.test_missing_recipient
TypingValidationHelpersTest.test_recipient_for_user_ids
TypingValidationHelpersTest.test_recipient_for_user_ids_non_existent_id
TypingLegacyMobileSupportTest.test_legacy_email_interface
This field wasn't accessed by any clients and was a less robust
version of the user_id field. Any client hoping to be interested in
who did message edits should be able to handle working with user IDs
rather than email addresses.
This commit includes a new `stream_post_policy` setting,
by replacing the `is_announcement_only` field from the Stream model,
which is done by mirroring the structure of the existing
`create_stream_policy`.
It includes the necessary schema and database migrations to migrate
the is_announcement_only boolean field to stream_post_policy,
a smallPositiveInteger field similar to many other settings.
This change is done to allow organization administrators to restrict
new members from creating and posting to a stream. However, this does
not affect admins who are new members.
With many tweaks by tabbott to documentation under /help, etc.
Fixes#13616.
This flag affects page_params and the
payload you get back from POSTs to this
url:
users/me/presence
The flag does not yet affect the
presence events that get sent to a
client.
In addition to making our schema check stricter, it also makes it
possible for us to extend check_events_dict to do additional
validation that's only expected for the full event object.
This experimental setting disables sending private messages in Zulip
in a crude way (i.e. users get an error when they try to send one).
It makes no effort to adjust the UI to avoid advertising the idea of
sending private messages.
Fixes#6617.
We should take adventage of the recipient field being denormalized into
the Stream model. We don't need to make queries to figure out a stream's
recipient id, so we take advantage of that to eliminate some of
those redundant queries and simplify StreamRecipientMap.
In 3892a8afd8, we restructured the
system for managing uploaded files to a much cleaner model where we
just do parsing inside bugdown.
That new model had potentially buggy handling of cases around both
relative URLs and URLS starting with `realm.host`.
We address this by further rewriting the handling of attachments to
avoid regular expressions entirely, instead relying on urllib for
parsing, and having bugdown output `path_id` values, so that there's
no need for any conversions between formats outside bugdowm.
The check_attachment_reference_change function for processing message
updates is significantly simplified in the process.
The new check on the hostname has the side effect of requiring us to
fix some previously weird/buggy test data.
Co-Author-By: Anders Kaseorg <anders@zulipchat.com>
Co-Author-By: Rohitt Vashishtha <aero31aero@gmail.com>
Adds required API and front-end changes to modify and read the
wildcard_mentions_notify field in the Subscription model.
It includes front-end code to add the setting to the user's "manage
streams" page. This setting will be greyed out when a stream is muted.
The PR also includes back-end code to add the setting the initial state of
a subscription.
New automated tests were added for the API, events system and front-end.
In manual testing, we checked that modifying the setting in the front end
persisted the change in the Subscription model. We noticed the notifications
were not behaving exactly as expected in manual testing; see
https://github.com/zulip/zulip/issues/13073#issuecomment-560263081 .
Tweaked by tabbott to fix real-time synchronization issues.
Fixes: #13429.
Previously, get_recent_private_messages could take 100ms-1s to run,
contributing a substantial portion of the total runtime of `/`.
We fix this by taking advantage of the recent denormalization of
personal_recipient into the UserProfile model, allowing us to avoid
the complex join with Recipient that was previously required.
The change that requires additional commentary is the change to the
main, big SQL query:
1. We eliminate UserMessage table from the query, because the condition
m.recipient_id=%(my_recipient_id)d
implies m is a personal message to the user being processed - so joining
with usermessage to check for user_profile_id and flags&2048 (which
checks the message is private) is redundant.
2. We only need to join the Message table with UserProfile
(on sender_id) and get the sender's personal_recipient_id from their
UserProfile row.
Fixes#13437.
This is a performance optimization, since we can avoid doing work
related to wildcard mentions in the common case that the message can't
have any. We also add a unit test for adding wildcard mentions in a
message edit.
This change makes it possible for users to control the notification
settings for wildcard mentions as a separate control from PMs and
direct @-mentions.
Since years ago, this field hasn't been used for anything other than
some logging that would be better off logging the user ID anyway.
It existed in the first place simply because we weren't passing the
user_profile_id to Tornado at all.
The function only used the user's realm anyway, so this is a cleaner
API.
This should also make it more convenient to permanently delete
messages manually, since one doesn't have to fetch a random user in
the realm in order to delete a message using the management shell.
No functional change.
Previously, we were using user_profile.email rather than
user_profile.delivery_email in all calculations involving Gravatar
URLs, which meant that all organizations with the new
EMAIL_ADDRESS_VISIBILITY_ADMINS setting enabled had useless gravatars
not based on the `user15@host.domain` type fake email addresses we
generate for the API to refer to users.
The fix is to convert these calculations to use the user's
delivery_email. Some refactoring is required to ensure the data is
passed through to the parts of the codebase that do the check;
fortunately, our automated tests of schemas are effective in verifying
that the new `sender_delivery_email` field isn't visible to the API.
Fixes#13369.
Previously, we weren't properly passing through the value of the
client_gravatar flag from the caller, resulting in buggy results if
the caller passed client_gravatar=False to do_test().
We happened to not have any uses of this before, but we're about to
add one.
MigrationsTestCase is intentionally omitted from this, since migrations
tests are different in their nature and so whatever setUp()
ZulipTestCase may do in the future, MigrationsTestCase may not
necessarily want to replicate.
Apparently, the Zulip notifications (and resulting emails) were
correct, but the download links inside the Zulip UI were incorrectly
not including S3 prefix on the URL, making them not work.
While we're at this, we rewrite the somewhat convoluted previous
system for formatting the data export output.
Previously, the unread_msgs data structure accounting (used for both
the web and mobile apps to determine the "Unread mentions" count
displayed in the UI) did not include wildcard mentions at all.
We fix this by adding the logic required to include properly that
data, with tests. As discussed in #6040, it makes sense to include
muted streams and topics for the purpose of this calculation.
Fixes part of #6040.
Send the config_options for each supported incoming webhook bot along
with the initial state (not present in apply_events since this is
mostly just static data).
This was used as a helper to construct the final display_recipient when
fetching messages. With the new mechanism of constructing
display_recipient by fetching appropriate users/streams from the
database and cache, this shouldn't be needed anymore.
The previous iteration still had the failure mode of not actually
testing anything, because it didn't trigger the data export code path
(and in fact was getting an HTTP 401 authentication denied error).
This test was broken due to using an empty `RealmAuditLog`
table. We fix this by mocking the creation of an export,
thus creating an entry, similar to what we do in our other
tests.
This feature is intended to cover all of our ways of exporting a
realm, not just the initial "public export" feature, so we should name
things appropriately for that goal.
Additionally, we don't want to include data exports in page_params;
the original implementation was actually buggy and would have.
This replaces the two custom Google authentication backends originally
written in 2012 with using the shared python-social-auth codebase that
we already use for the GitHub authentication backend. These are:
* GoogleMobileOauth2Backend, the ancient code path for mobile
authentication last used by the EOL original Zulip Android app.
* The `finish_google_oauth2` code path in zerver/views/auth.py, which
was the webapp (and modern mobile app) Google authentication code
path.
This change doesn't fix any known bugs; its main benefit is that we
get to remove hundreds of lines of security-sensitive semi-duplicated
code, replacing it with a widely trusted, high quality third-party
library.
This commit adds a new setting to the user's notification settings that
will change the behaviour of the unread count in the title bar and
desktop application.
When enabled, the title bar will show the count of unread private messages
and mentions. When disabled, the title bar will act as before, showing
the total number of unread messages.
Fixes#1736.
Namely, here we add the "plan_includes_wide_organization_logo" and
"upgrade_text_for_wide_organization_logo" to the page_params (which
is set in zerver/lib/events.py).
"plan_includes_wide_organization_logo" is True if the plan is not of
the Realm.LIMITED type. We need to add this extra boolean parameter
instead of just using "realm_plan_type" to make things a lot easier
to work with on the frontend side, especially considering that
handlebars won't allow checking for equality in its {{#if}} blocks.
When a realm's plan type is updated using "do_change_plan_type" we
notify active users of the realm. This way certain plan features
could be enabled instantaneously for active users.
This adds a setting to control Zulip's default behavior of sorting to
bottom and graying out inactive streams. The previous logic is still
the default "automatic", but this gives users more control. See the
models.py comment for details.
Fixes#11524.
Modifies the dict with the user info to include the key `bot_owner_id`
so it can be displayed in the user info popover.
Tests concerned with changing bot owner have been modified to have
number of events=2 because while updating the bot info, two events
are fired -- updating the `realm_bot` and `realm_user` since the
key `bot_owner_id` is a part of realm user info.
This renames Subscription.in_home_view field to is_muted, for greater
clarity as to what it does just from seeing the setting name, without
having to look it up.
Also disabled an obsolete test_migrations test.
Fixes#10042.
This commit migrates the Subscription's notification fields from a
BooleanField to a NullBooleanField where a value of None means to
inherit the value from user's profile.
Also includes a migrations to set the corresponding settings to None
if they match the user profile's values. This migration helps us in
getting rid of the weird "Apply to all" widget that we offered on
subscription settings page.
The mobile apps can't handle None appearing as the stream-level
notification settings, so for backwards-compatibility we arrange to
only send True/False to the mobile apps by applying those defaults
server-side. We introduce a notification_settings_null value within a
client_capabilities structure that newer versions of the mobile apps
can use to request the new model.
This mobile compatibility code is pretty effectively tested by the
existing test_events tests for the subscriptions subsystem.
This commit replaces the `create_stream_by_admins_only` setting with a
new `create_stream_policy` setting, which mirroring the structure of
the existing `invite_to_stream_policy`.
This is important preparation for migrating the waiting period feature
to be its own independent setting.
Fixes#12236.
This commit creates a new organization setting that determines whether
a user can invite other users to streams. Previously this was linked
to the waiting period threshold, but this was both not documented and
overly limiting.
With significant tweaks by tabbott to change the database model to not
involve two threshhold fields, edit the tests, etc.
This requires follow-up work to make the create stream policy setting
work how this code implies it should.
Fixes#12042.
An endpoint was created in zerver/views. Basic rate-limiting was
implemented using RealmAuditLog. The idea here is to simply log each
export event as a realm_exported event. The number of events
occurring in the time delta is checked to ensure that the weekly
limit is not exceeded.
The event is published to the 'deferred_work' queue processor to
prevent the export process from being killed after 60s.
Upon completion of the export the realm admin(s) are notified.
This is important because upcoming features will include slightly more
complex logic in post_process_state that we'd ideally like to be
included in what this suite tests.
This requires a few related changes:
* A small change to post_process_state to sort the realm_users objects
by user_id to ensure those data structures are stable.
* Improvements to the logic for checking if the initial state has
changed to use match_states for better output.
This adds experimental support in /register for sending key
statistical data on the last 1000 private messages that the user is a
participant in. Because it's experimental, we require developers to
request it explicitly in production (we don't use these data yet in
the webapp, and it likely carries some perf cost).
We expect this to be extremely helpful in initializing the mobile app
user experience for showing recent private message conversations.
See the code comments, but this has been heavily optimized to be very
efficient and do all the filtering work at the database layer so that
we minimize network transit with the database.
Fixes#11944.
There were several problems with the old format:
* The sender was not necessarily the sender; it was the person who did
the deletion (which could be an organization administrator)
* It didn't include the ID of the sender, just the email address.
* It didn't include the recipient ID, instead having a semi-malformed
recipient_type_id under the weird name recipient_user_ids.
Since nothing was relying on the old behavior, we can just fix the
event structure.
This field is primarily intended to support avoiding displaying the
"more topics" feature in new organizations and streams, where we might
know that all messages in the stream are already available in the
browser.
Based on original work by Roman Godov, and significantly modified by
tabbott.
The second migration involved here could be expensive on Zulip Cloud,
but is unlikely to be an issue on other servers.
The test_events system was in several tests using get_realm to fetch a
realm object, rather than accessing self.user_profile.realm. This
created subtle problems where we were neither directly editing nor
refreshing the `realm` object associated with our UserProfile object
from the database after our the `do_*` methods.
The payoff for this is we can update the previously confused
`do_change_icon_source` test to actually change the state and have the
correct result.
Guest users will just get an empty list of default streams; we also
hide the "Default streams" organization view from the guest users UI.
This is for consistency with not providing guest users the full list
of streams in an organization.
Fixing this involves fixing the backend to handle unchanged field
submissions of the Zoom credentials without trying to re-validate the
credentials (for performance) as well as to fetch the already-sent
secret.
This change should help people discover to distinguish
silent mentions in text as a part of Zulip syntax while
differentiating them from regular mentions.
Add all the stop words to page_params, reading from the
`zulip_english.stop` database, with caching to avoid loading the file
on every page load.
Part of #10592.
This causes changing the email_address_visibility field to actually
modify what user_profile.email values are generated for users, both on
user creation and afterwards as email addresses are edited.
The overall feature isn't yet complete, but this brings us pretty close.
This commit does the following three things:
1. Update stream model to accomodate rendered description.
2. Render and save the stream rendered description on update.
3. Render and save stream descriptions on creation.
Further, the stream's rendered description is also sent whenever the
stream's description is being sent.
This is preparatory work for eliminating the use of the
non-authoritative marked.js markdown parser for stream descriptions.
You can now pass in an info field with a value
like "out to lunch" to the /users/me/status,
and the server will include that in its outbound
events.
The semantics here are that both "away" and
"status_text" have to have defined values in order
to cause changes. You can omit the keys or
pass in None when values don't change.
The way you clear info is to pass the empty
string.
We also change page_params to have a dictionary
called "user_status" instead of a set of user
ids. This requires a few small changes on the
frontend. (We will add "status_text" support in
subsequent commits; the changes here just keep
the "away" feature working correctly.)
We now have single function that handle both away
and not-away.
This refactoring sets us up to piggyback "info" more
easily onto status updates.
The only thing that changes here is that we don't
delete database rows any more when users revoke
their away status. Instead we just set the status
to NORMAL.
When I was initially writing the tests to solve issue #10131 in PR
2 schema checkers as I modified the code to send the rendered_value
only when required.
When I was using just 1 schema checker shared between two code paths,
we needed _allow_only_listed_keys. But after shifting to 2 schema
checkers for the two different cases, we no longer needed that flag,
and it's better to remove it for a stronger check.
Feature of sending notification to the stream using notification bot
is added. user_profile is also passed to do_rename_stream for using
the name of user who renamed the stream in notification.
Notification is sent to the stream using
internal_send_stream_message in do_rename_stream.
Fixes#11034.
This makes it possible it include our standard markdown formatting in
one's custom profile fields, allowing for links, emphasis, emoji, etc.
Fixes#10131.
Also, add a new notification sound, "ding". It comes from
https://freesound.org, where the original Zulip notification sound comes
from as well. In the future, new sounds can be added by adding audio
files to the `static/audio/notification_sounds` directory.
Tweaked significantly by tabbott:
* Avoided removing static/audio/zulip.ogg, because that file is
checked for by old versions of the desktop app.
* Added a views check for the sound being valid + tests.
* Added additional tests.
* Restructured the test_events test to be cleaner.
* Removed check_bool_or_string.
* Increased max length of notification_sound.
* Provide available_notification_sounds in events data set if global
notifications settings are requested.
Fixes#8051.
This is preparatory work for settings controlling who can see user
emails; it includes the API-level support for editing it, but no code
to actually enforce the policy.
This is the first step of letting users use Zulip markdown in their
SHORT_TEXT and LONG_TEXT custom profile fields, so that they can
include emphasis, links, etc.
This doesn't include any frontend logic yet, however.
This is a preparator refactor for supporting hosting different Tornado
processes on different servers; to look up which Tornado server we
should be sending the event to, we'll need the realm object.
sahil839
Tim Abbott
Steve Howell
Aman Agrawal
Anders Kaseorg
orientor
Mohit Gupta
arpit551
MariaGkoulta
Hashir Sarwar
Clara Dantas
Anders Kaseorg
Pragati Agrawal
Wyatt Hoodes
Steve Howell
Abhishek-Balaji
rebtung
Ryan Rehman
Rohitt Vashishtha
Tim Abbott
Mateusz Mandera
Nat1405
Matheus Melo
Hemanth V. Alluri
Rishi Gupta
Harshit Bansal
David Wood
Vaibhav
Aditya Bansal
Yashashvi Dave
Roman Godov
Puneeth Chaganti
Challa Venkata Raghava Reddy
Vishnu Ks
YashRE42
Anders Kaseorg
kunal-mohta
Marco Burstein
Marco Burstein
Joshua Pan