Links to the available message flag table in the feature level 224
changelog entry, as there are relevant **Changes** notes for this
feature level in that part of the API documentation.
Updates the order and formatting of these new and deprecated flags
in the available flags table. Also, adds a link to the topic
wildcard mentions section of the help center documentation.
Makes small clean ups to the changes notes for this feature level,
as well as the changelog entry itself.
The original commit for these feature level 224 API changes was
c597de6a1d.
This commit adds a realm-level setting named
'zulip_update_announcements_stream' that configures the
stream to which zulip updates should be posted.
Fixes part of #28604.
This commit renames the realm-level setting
'signup_notifications_stream' to 'signup_announcements_stream'.
The new name reflects better what the setting does.
This commit renames the realm-level setting 'notifications_stream'
to 'new_stream_announcements_stream'.
The new name reflects better what the setting does.
Adds `user.realm.string_id` as the realm name to the base payload
for notifications. Uses this realm name in the body of the alert
in the `apns_data`.
Changes the event string from "test-by-device-token" to "test".
Fixes#28075.
Earlier, the event sent when an onboarding step (hotspot till now)
is marked as read generated an event with type='hotspots' and
'hotspots' named array in it.
This commit renames the type to 'onboarding_steps' and the array
to 'onboarding_steps' to reflect the fact that it'll also contain
data for elements other than hotspots.
This commit adds a new endpoint 'users/me/onboarding_steps'
deprecating the older 'users/me/hotspots' to mark hotspot as read.
We also renamed the view `mark_hotspot_as_read` to
`mark_onboarding_step_as_read`.
Reason: Our plan is to make this endpoint flexible to support
other types of UI elements not just restricted to hotspots.
This commit introduces non-intro hotspots.
They are a bit different than intro hotspots in the
following ways:
* All the non-intro hotspots are sent at once instead of
sending them one by one like intro hotspots.
* They only activate when a specific event occurs,
unlike intro hotspot where they activate after the
previous hotspot is read.
Now, the topic wildcard mention follows the following
rules:
* If the topic has less than 15 participants , anyone
can use @ topic mentions.
* For more than 15, the org setting 'wildcard_mention_policy'
determines who can use @ topic mentions.
Earlier, topic wildcard mentions followed the same restriction
as stream wildcard mentions, which was incorrect.
Fixes part of #27700.
This commit adds code to send "realm_user/remove" event
when a guest user loses access to a user due to the user
being unsubscribed from one or more streams.
This commit adds code to send user creation events to
guests who gain access to new subscribers and to the
new guest subscribers who gain access to existing
stream subscribers.
The presence and user status update events are only sent to accessible
users, i.e. guests do not receive presence and user status updates for
users they cannot access.
This commit adds code to make sure that update events for changing
a user's role, email, etc. are not sent to guests who cannot access
the modified user.
This commit adds a new option 'DMs, mentions, and followed topics'
to 'desktop_icon_count_display' setting.
The total unread count of DMs, mentions, and followed topics appears
in desktop sidebar and browser tab when this option is configured.
Some existing options are relabeled and renumbered. We finally have:
* All unread messages
* DMs, mentions, and followed topics
* DMs and mentions
* None
Fixes#27503.
While the server implementation has accepted this value for a few
months as part of building the feature, following topics was not a
fully supported feature of the Zulip server before
3f2ab44f94, just before feature
level 219.
So that's probably the correct level to document as the first feature
level at which we recommend that clients supporting the followed
topics feature process the value.
This commit adds new API endpoint to get stream email which is
used by the web-app as well to get the email when a user tries
to open the stream email modal.
The stream email is returned only to the users who have access
to it. Specifically for private streams only subscribed users
have access to its email. And for public streams, all non-guest
users and only subscribed guests have access to its email.
All users can access email of web-public streams.
This commit removes "email_address" field from Subscription objects
and we would instead a new endpoint in next commit to get email
address for stream with proper access check.
This change also fixes the bug where we would include email address
for the unsubscribed private stream as well when user did not have
permission to send message to the stream, and having email allowed
the unsubscribed user to send message to the stream.
Note that the unsubscribed user can still send message to the stream
if the user had noted down the email before being unsubscribed
and the stream token is not changed after unsubscribing the user.
This commit adds new setting for controlling who can access
all users in the realm which would have "Everyone" and
"Members only" option.
Fixes part of #10970.
Rename the existing 'wildcard_mentioned' flag to
'stream_wildcard_mentioned'.
The 'wildcard_mentioned' flag is deprecated and exists for
backwards compatibility.
We have two separate flags for stream and topic wildcard mentions,
i.e., 'stream_wildcard_mentioned' and 'topic_wildcard_mentioned',
respectively.
* stream wildcard mentions: `@all`, `@everyone`, and `@stream`
* topic wildcard mentions: `@topic`
The `wildcard_mentioned` flag is included in the events and
API response if either `stream_wildcard_mentioned` or
`topic_wildcard_mentioned` is set.
We'll need this information in order to properly direct APNs
notifications. Happily, the Zulip server always sends it when
registering an APNs token; and it appears it always has done so
since the commit:
cddee49e7 Add support infrastructure for push notification bouncer service.
back in 2016. So there's no compatibility issue from requiring it.
We're going to need to use this information, so we shouldn't just
assume a value; the client should tell us the actual value.
Conveniently, the Zulip mobile app does already pass this parameter
and has since forever. So we can just start requiring it, with no
compatibility constraint.
We now send "realm_user/update" (and "realm_bot/update" for bots)
events with "is_active" field when deactivating and reactivating
users, including bots.
We would want to use "remove" event for a user losing access
to another user for #10970, so it is better to use "update"
event for deactivation as we only update "is_active" field
in the user objects and the clients still have the data for
deactivated users.
Previously, we used to send "add" event for reactivation along
with complete user objects, but clients should have the data
for deactivated users as well, so an "update" event is enough
like we do when deactivating users.
This commit adds code to pass configuration objects for group
permission settings in register response to clients such that
we do need to duplicate that data in clients and can avoid
future bugs due to inconsistency.
The "server_supported_permission_settings" field is included
in the response if "realm" is present in "fetch_event_types",
as this is what we do for other server-related fields.
Previous behavior-
- Guest did not receive stream creation events for new
web-public streams.
- Guest did not receive peer_add and peer_remove events
for web-public and subscribed public streams.
This commit fixes the behavior to be -
- Guests now receive stream creation events for new
web-public streams.
- Guest now receive peer_add and peer_remove events for
web-public and subscribed public streams.
This commit renames default_view and escape_navigates_to_default_view
settings to web_home_view and web_escape_navigates_to_home_view in
database and API to match with our recent renaming of user facing
strings related to this.
We also rename the variables, functions, comments in code and class
names and IDs for elements related to this.
This commit renames "default" views to "home" views in the setting
labels, keyboard shortcuts list, help documentation and its urls.
This commit does not do changes in variable and class names, setting
field in database, API docs and changelog.
Fixes part of #27251.
Add an optional `automatic_new_visibility_policy` enum field
in the success response to indicate the new visibility policy
value due to the `automatically_follow_topics_policy` and
`automatically_unmute_topics_in_muted_streams_policy` user settings
during the send message action.
Only present if there is a change in the visibility policy.
This commit adds a 'stream_id' parameter to the 'POST /typing'
endpoint.
Now, 'to' is used only for "direct" type. In the case of
"stream" type, 'stream_id' and 'topic' are used.
When the `type` of the message being composed is "stream",
this commit updates the `to` parameter to accept the ID of
the stream in which the message is being typed.
Earlier, it accepted a single-element list containing the ID
of the stream.
Sending the element instead of a list containing the single element
makes more sense.
This commit removes the compatibility support for "private"
being a valid value for the 'type' parameter in 'POST /typing'.
"direct" and "stream" are the only valid values.
This commit replaces the value `private` with `direct` in the
`message_type` field for the `typing` events sent when a user
starts or stops typing a message.
This commit adds two user settings, named
* `automatically_follow_topics_policy`
* `automatically_unmute_topics_in_muted_streams_policy`
The settings control the user's preference on which topics they
will automatically 'follow' or 'unmute in muted streams'.
The policies offer four options:
1. Topics I participate in
2. Topics I send a message to
3. Topics I start
4. Never (default)
There is no support for configuring the settings through the UI yet.
Earlier, 'is_row_muted' returned 'true' if the message was in
a muted stream or muted topic.
If the message is in an unmuted or followed topic in a muted
stream, such topics should be treated as not muted topics
in an unmuted stream.
This commit fixes the incorrect behavior.
Now, for wildcard mentions, 'unread_msgs.mentions' exclude
the IDs in muted streams only if the message is in default or
muted topic.
Also, 'unread_msgs.count' takes into account the unreads in unmuted
or followed topics in muted streams too.
Documents that this bug was fixed in the API changelog.
This commit adds a `jitsi_server_url` field to the Realm model, which
will be used to save the URL of the custom Jitsi Meet server. In
the database, `None` will encode the server-level default. We can't
readily use `None` in the API, as it could be confused with "field not
sent". Therefore, we will use the string "default" for this purpose.
We have also introduced `server_jitsi_server_url` in the `/register`
API. This will be used to display the server's default Jitsi server
URL in the settings UI.
The existing `jitsi_server_url` will now be calculated as
`realm_jitsi_server_url || server_jitsi_server_url`.
Fixes a part of #17914.
Co-authored-by: Gaurav Pandey <gauravguitarrocks@gmail.com>
In feature levels 153 and 154, a new value of "partially_completed"
for `result` in a success (HTTP status code 200) was added for two
endpoints that process messages in batches: /api/delete-topic and
/api/mark-all-as-read.
Prior to these changes, `result` was either "success" or "error" for
all responses, which was a useful API invariant to have for clients.
So, here we remove "partially_completed" as a potential value for
"result" in a response. And instead, for the two endpoints noted
above, we return a boolean field "complete" to indicate if the
response successfully deleted/marked as read all the targeted
messages (complete: true) or if only some of the targeted messages
were processed (complete: false).
The "code" field for an error string that was also returned as part
of a partially completed response is removed in these changes as
well.
The web app does not currently use the /api/mark-all-as-read
endpoint, but it does use the /api/delete-topic endpoint, so these
changes update that to check the `complete` boolean instead of the
string value for `result`.
Expands API changelog feature level 134 entry and adds the related
Changes notes to the events documentation for the updates made in
commit f4fcedd: "stream op: create" and "subscription op: peer_add"
events being sent when a private stream is made public.
Those changes were made after the feature level 133 updates, but
before the feature level 134 updates, which is why 134 is the
feature level for the change that is documented for clients.
In commit ada2991f1c, when a user gains access to a stream due to
a role change, in addition to sending "stream op: create" events,
"subscription op: peer_add" events are sent for streams that the
user gains access to due to their role change. Updates the API
changelog entry for feature level 205.
Updates the "subcription op: peer_add" event documentation to be
more accurate in for the general use cases of this event, which
are to provide updated subscriber information for streams that
a user has access to.
Earlier whenever a new invitation is created a event was sent
to only admin users. So, if invites by a non-admins user are changed
the invite panel does not live update.
This commit makes changes to also send event to non-admin
user if invites by them are changed.
This commit does the backend changes required for adding a realm
setting based on groups permission model and does the API changes
required for the new setting `Who can create multiuse invite link`.
Updates the API error response when there is an unknown or
deactivated user in the `principals` parameter for either the
`/api/subscribe` or `/api/unsubscribe` endpoints. We now use
the `access_user_by_email` and `access_user_by_id` code paths,
which return an HTTP response of 400 and a "BAD_REQUEST" code.
Previously, an HTTP response of 403 was returned with a special
"UNAUTHORIZED_PRINCIPAL" code in the error response. This code
was not documented in the API documentation and is removed as
a potential JsonableError code with these changes.
Fixes#26593.
Updates API changelog entries for feature level 205 for minor
revisions and the addition of help center links. Also, revises
the Changes notes for the stream creation and deletion events
for the same feature level.
Updates the one last remaining reference to private messages in
the API changelog in the feature level 11 entry. Also, revises
that entry to be slightly more specific.
This PR implements the audio call feature for Zoom. This is done by explicitly
telling Zoom to create a meeting where the host's video and participants' video
are off by default.
Another key change is that when creating a video call, the host's and
participants' video will be on by default. The old code doesn't specify that
setting, so meetings actually start with video being off. This new behavior has
less work for users to do. They don't have to turn on video when joining a call
advertised as "video call". It still respects users' preferences because they
can still configure their own personal setting that overrides the meeting
defaults.
The Zoom API documentation can be found at
https://developers.zoom.us/docs/api/rest/reference/zoom-api/methods/#operation/meetingCreateFixes#26549.
The change in behavior suggesting the need for this clarification is
summarized below, as discussed in the following topic:
https://chat.zulip.org/#narrow/stream/378-api-design/topic/update_message.20default.20notifications
The new text is as suggested by Greg Price.
The change at feature level 152 made the moving of topics within and
between streams more consistent, by applying the optional parameters
introduced for the latter to both cases (`send_notification_to_[new|old]_thread`).
The default for the `old` notification value was changed to `false` at
this point, but the equivalent `new` value was not. This introduced a
change in behavior for existing clients of the API when moving topics
within streams, which now always produce a notification message by
default.
The improved consistency and default behavior for new API clients were
considered primary factors at the time of this change, overriding
concerns over backwards compatbility.
We now send stream creation and stream deletion events on
changing a user's role because a user can gain or lose
access to some streams on changing their role.
The "streams" field in "/register" response did not include web-public
streams for non-admin users but the data for those are eventually
included in the subscriptions data sent using "subscriptions",
"unsubscribed" and "never_subscribed" fields.
This commit adds code to include the web-public streams in "streams"
field as well as everyone can access those and will make the "streams"
data complete.
Adds typing notification constants to the response given by
`POST /register`. Until now, these were hardcoded by clients
based on the documentation for implementing typing notifications
in the main endpoint description for `api/set-typing-status`.
This change also reflects updating the web-app frontend code
to use the new constants from the register response.
Co-authored-by: Samuel Kabuya <samuel.mwangikabuya@kibo.school>
Co-authored-by: Wilhelmina Asante <wilhelmina.asante@kibo.school>
Currently, we are displaying the "Complete the organization profile"
banner immediately after the organization was created. It's important to
strongly encourage orgs to configure their profile, so we should delay
showing the banner if the profile has not been configured after 15 days.
Thus also allows the users to check out Zulip and see how it works before
configuring the organization settings.
Fixes: #24122.
This adds API support to reorder linkifiers and makes sure that the
returned lists of linkifiers from `GET /events`, `POST /register`, and
`GET /realm/linkifiers` are always sorted with the order that they
should processed when rendering linkifiers.
We set the new `order` field to the ID with the migration. This
preserves the order of the existing linkifiers.
New linkifiers added will always be ordered the last. When reordering,
the `order` field of all linkifiers in the same realm is updated, in
a manner similar to how we implement ordering for
`custom_profile_fields`.
This commit renames the 'PRIVATE_MESSAGE' attribute of the
'NotificationTriggers' class to 'DIRECT_MESSAGE'.
Custom migration to update the existing value in the database.
It includes 'TODO/compatibility' code to support the old
notification trigger value 'private_message' in the
push notification queue during the Zulip server upgrades.
Earlier 'private_message' was one of the possible values for the
'trigger' property of the '[`POST /zulip-outgoing-webhook`]' response;
Update the docs to reflect the change in the above-mentioned trigger
value.
In this commit, we introduce a new option in the stream creation
UI - a 'Default stream for new users' checkbox. By default, the
checkbox is set to 'off' and is only visible to admins. This
allow admins to easily designate a stream as the default stream
for new users during stream creation.
Fixes#24048.
This commit adds a 'Default stream for new users' checkbox in
the stream editing UI to allow admins to easily add or remove
a stream as the default stream for new users. Previously, this
functionality required navigating to separate menu.
Fixes a part of #24048.
This commit adds code to pass stream traffic data using
the "stream_weekly_traffic" field in stream objects.
We already include the traffic data in Subscription objects,
but the traffic data does not depend on the user to stream
relationship and is stream-only information, so it's better
to include it in Stream objects. We may remove the traffic
data and other stream information fields for Subscription
objects in future.
This will help clients to correctly display the stream
traffic data in case where client receives a stream
creation event and no subscription event, for an already
existing stream which the user did not have access to before.
Earlier the API endpoints related to user_group accepts and returns a
field `can_mention_group_id` which represents the ID
of user_group whose members can mention the group.
This commit renames this field to `can_mention_group`.
Earlier the API endpoints related to streams accepts and returns a
field `can_remove_subscribers_group_id` which represents the ID
of user_group whose members can remove subscribers from stream.
This commit renames this field to `can_remove_subscribers_group`.
Dropping support for url_prefix for RealmPlayground, the server now uses
url_template instead only for playground creation, retrieval and audit
logging upon removal.
This does the necessary handling so that url_template is expanded with
the extracted code.
Fixes#25723.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Updates the realm field `default_code_block_language` to have a default
value of an empty string instead of None. Also updates the web-app to
check for the empty string and not `null` to indicate no default is set.
This means that both new realms and existing realms that have no default
set will have the same value for this setting: an empty string.
Previously, new realms would have None if no default was set, while realms
that had set and then unset a value for this field would have an empty
string when no default was set.
Expands support for the message ID operand for id" operator to be either
a string or an integer. Previously, this operand was always validated as
a string.
We did not send the stream creation events when subscribing
guests to public streams while we do send them when subscribing
non-admin users to private streams.
This commit adds code to send the stream creation events when
subscribing guests to public streams, so the clients can know
that the stream exists and fixes the bug where client tries
to process a subscription add event for a stream which it does
not know about.
This commit adds code to include can_mention_group_id field to
UserGroup objects passed with response of various endpoints
including "/register" endpoint and also in the group object
send with user group creation event.
Fixes a part of #25927.
This endpoint was previously marked as `intentionally_undocumented`
but that was mistake.
Removed `intentionally_undocumented` and added proper documentation
with valid `python_example` for this Endpoint.
Fixes: #24084
Updates the example for both of these events in the documentation
to be the current version. These were missed when the feature
level 35 updates were made to the API specification for these
events, see commit noted below.
Also, for completeness, adds Changes notes for feature level 35
and feature level 19, for these events.
The feature level 35 changes were made in commit 7ff3859136.
The feature level 19 changes were made in commit 00e60c0c91.
Removes the `sender_short_name` from the example for the message
event in `/get-events`.
Also, to make this complete, adds Changes notes for the feature
level 26 changes that were made to the message objects returned
in the message events for `/get-events` and in the messages
array for the `/get-messages` response.
The field was originally removed from message objects in
commit b375581f58.
Revises the API changelog feature level 189 entry for formatting
error and to clarify the text. Also, bumps the API_FEATURE_LEVEL
in `version.py`.
The original pull request for these changes was #25640.
This commit makes it possible for users to control the
audible desktop notifications for messages sent to followed topics
via a global notification setting.
There is no support for configuring this setting through the UI yet.
This commit makes it possible for users to control the
visual desktop notifications for messages sent to followed topics
via a global notification setting.
There is no support for configuring this setting through the UI yet.
This commit makes it possible for users to control the wildcard
mention notifications for messages sent to followed topics
via a global notification setting.
There is no support for configuring this setting
through the UI yet.
This commit makes it possible for users to control
the push notifications for messages sent to followed topics
via a global notification setting.
There is no support for configuring this setting
through the UI yet.
This commit makes it possible for users to control
the email notifications for messages sent to followed topics
via a global notification setting.
Although there is no support for configuring this setting
through the UI yet.
Add five new fields to the UserBaseSettings class for
the "followed topic notifications" feature, similar to
stream notifications. But this commit consists only of
the implementation of email notifications.
Revises the API changelog entry for feature level 161 to document
the changes to `DELETE /users/me/subscriptions` and to explain
more clearly what the new `can_remove_subscribers_group_id`
parameter does.
Updates the feature level 161 changes notes and related descriptions
to include links and also more clearly explain the updates.
Also, updates the `GET /user_groups` example to better reflect what
is returned for system groups since this is now referenced in the
`can_remove_subscribers_group_id` parameter description.
The original API feature level 161 API documentation changes were
made in commit c3759814be and commit 73f11853ec.
Lauryn Menard
Mateusz Mandera
Alex Vandiver
Prakhar Pratyush
Tim Abbott
Anders Kaseorg
Vector73
Sahil Batra
Riken Shah
Greg Price
Prakhar Pratyush
Hemant Umre
Lalit
Ujjawal Modi
Satyam Bansal
Danny Su
neiljp (Neil Pilgrim)
Samuel
Joelute
Zixuan James Li