This gives them cache-compatible URLs, and also avoids some extra
copies of the sprite sheet images.
Comments on the Octopus emoji added by tabbott.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This moves some code from settings_display.js
into the new module settings_config.js.
Extracting this module breaks some dependencies
on settings_display.js (which has some annoying
transitive dependencies, including jQuery).
In particular this isolates stream_data from
from settings_display.js.
Two of the three structures that we moved here
weren't even directly used by settings_display.js,
since we do a lot of rendering in the modules
admin.js and setting.js.
We make get_all_display_settings() a function
to avoid a require-time dependency on page_params.
Breaking the dependencies simplifies a few
node tests.
Most of the node test complexity came from the
following commit in March 2019:
5a130097bf
The commit itself seems harmless enough, but
dependencies can have a somewhat "viral" nature,
where making stream_data depend on settings_display
caused us to modify four different node tests.
This allows us to collect coverage for Handlebars templates, and also
improves the readability of Handlebars-related stack traces.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
We used to have a block of code doing this just in the presence
endpoint because that's where we'd had error-handling problems with it
not being present, but it seems more correct for it to run
unconditionally on all HTTP requests.
This requires adding a dependency of channel on reload_state, which we
record in the webpack configuration for now.
This should return us to a situation where we won't get blueslip
browser error reporting for users created while a device was offline
just before it reloads.
We now have 100% line coverage on 71 JS files.
This is thanks to about 150 people who have
contributed code to frontend/node_tests.
And then 126 files are still short of 100% line
coverage.
We now enforce line coverage with a set called
EXEMPT_FILES, which are the files for which
we do NOT expect to have 100% coverage.
Using an exemption list makes it so that adding
a new JS file to the project without 100% line
coverage will cause the build to fail. This will
encourage folks to be intentional about their
lack of test coverage.
If a file that had 100% coverage somehow regressed
to 0% coverage, we would report an error to the
console, but we weren't treating it as an actual
failure.
We've probably always had this bug, but it probably
rarely was an issue, since devs might have seen
the error locally, or hopefully whatever crazy
thing you did to totally remove coverage would
have had other symptoms.
If this was intentional, I suspect it might have
had something to do with wanting to get coverage
reports when you just run individual tests. But
a while back we changed it so that when you run
individual tests, we don't do the line coverage
enforcement.
We now use vdom-ish techniques to track the
list items for the pm list. When we go to update
the list, we only re-render nodes whose data
has changed, with two exceptions:
- Obviously, the first time we do a full render.
- If the keys for the items have changed (i.e.
a new node has come in or the order has changed),
we just re-render the whole list.
If the keys are the same since the last re-render, we
only re-render individual items if their data has
changed.
Most of the new code is in these two modules:
- pm_list_dom.js
- vdom.js
We remove all of the code in pm_list.js that is
related to updating DOM with unread counts.
For presence updates, we are now *never*
re-rendering the whole list, since presence
updates only change individual line items and
don't affect the keys. Instead, we just update
any changed elements in place.
The main thing that makes this all work is the
`update` method in `vdom`, which is totally generic
and essentially does a few simple jobs:
- detect if keys are different
- just render the whole ul as needed
- for items that change, do the appropriate
jQuery to update the item in place
Note that this code seems to play nice with simplebar.
Also, this code continues to use templates to render
the individual list items.
FWIW this code isn't radically different than list_render,
but it's got some key differences:
- There are fewer bells and whistles in this code.
Some of the stuff that list_render does is overkill
for the PM list.
- This code detects data changes.
Note that the vdom scheme is agnostic about templates;
it simply requires the child nodes to provide a render
method. (This is similar to list_render, which is also
technically agnostic about rendering, but which also
does use templates in most cases.)
These fixes are somewhat related to #13605, but we
haven't gotten a solid repro on that issue, and
the scrolling issues there may be orthogonal to the
redraws. But having fewer moving parts here should
help, and we won't get the rug pulled out from under
us on every presence update.
There are two possible extensions to this that are
somewhat overlapping in nature, but can be done
one a time.
* We can do a deeper vdom approach here that
gets us away from templates, and just have
nodes write to an AST. I have this on another
branch, but it might be overkill.
* We can avoid some redraws by detecting where
keys are moving up and down. I'm not completely
sure we need it for the PM list.
If this gets merged, we may want to try similar
things for the stream list, which also does a fairly
complicated mixture of big-hammer re-renders and
surgical updates-in-place (with custom code).
BTW we have 100% line coverage for vdom.js.
This test mostly tests logic that I'm about
to remove in subsequent commits, and it's a bit
messy.
This commit removes 100% line coverage, but I
will restore that a few commits later.
We have ~5 years of proof that we'll probably never
extend Dict with more options.
Breaking the classes into makes both a little faster
(no options to check), and we remove some options
in FoldDict that are never used (from/from_array).
A possible next step is to fine-tune the Dict to use
Map internally.
Note that the TypeScript types for FoldDict are now
more specific (requiring string keys). Of course,
this isn't really enforced until we convert other
modules to TS.
This adds the general machinery required, and sets it up for the file
`typing_status.js` as a first use case.
Co-authored-by: Anders Kaseorg <anders@zulipchat.com>
The minimal syntactic sugar it might provide isn’t worth the
unexpected side effects (including side effects on third party
modules).
For now, we allow zrequire to emulate the previous syntax in the Node
test suite, even though stealing part of the NPM namespace is
confusing.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This fixes an issue where one could end up with a `(` in the markdown
syntax for a link after copy-pasting this, which doesn't work in
markdown.
Fixes#12579.
This commit migrates the Subscription's notification fields from a
BooleanField to a NullBooleanField where a value of None means to
inherit the value from user's profile.
Also includes a migrations to set the corresponding settings to None
if they match the user profile's values. This migration helps us in
getting rid of the weird "Apply to all" widget that we offered on
subscription settings page.
The mobile apps can't handle None appearing as the stream-level
notification settings, so for backwards-compatibility we arrange to
only send True/False to the mobile apps by applying those defaults
server-side. We introduce a notification_settings_null value within a
client_capabilities structure that newer versions of the mobile apps
can use to request the new model.
This mobile compatibility code is pretty effectively tested by the
existing test_events tests for the subscriptions subsystem.
This commit adds `stream_ui_updates.js` module. This module
will includes functions which will update different ui elements
(i.e. subscription button, subscriber count).
Currently, the `test-js-with-node` tests append ".js" to filenames
without an extension. Since Typescript is now also supported, it can
produce results such as "dict.ts.js". To remedy this, check for ".ts"
files as well.
The delete operator could throw a TypeError when attempting to
remove a non-configurable property, which is rare in practice since
they can only be created using `Object.defineProperty()` and
`Object.freeze()`. We also never uses the output of `del()` anyway.
NOTE: If you revert this commit, you want to revert
the immediately prior commit as well. The history
is that Ishan made some improvements to the widget,
but there were some minor bugs. I decided not
to squash the commits together so that the git
history is clear who did what. (In particular, I
want questions about the JS code to come to me if
somebody does `git blame`.)
Anyway...
This is a fairly significant rewrite of the polling
widget, where I clean up the overall structure of
the code (including things from before the prior
fix) and try to polish the prior commit a bit as
well.
There are a few new features:
* We tell "other" users to wait for the poll
to start (if there's no question yet).
* We tip the author to say "/poll foo" (as
needed).
* We add edit controls for the question.
* We don't allow new choices until there's
a question.
The goal here was to enforce 100% coverage on
parse_narrow, but the code has an unreachable line
and is overly tolerant of bogus urls. This will
be fixed in the next commit.
We now let color_data keep its own state for
unused_colors, so that we longer have to pass in
a large list of unused_colors every time we want
to assign a new stream color.
This mostly matters at startup, where we might
be cycling through 5000 streams. We claim all
the unused colors up front.
Each operation now has an upper bound of expensiveness,
where the worst case scenario is basically popping
off the first element of a list of <= 24 colors.
The algorithm is now deterministic, too, to make
it easier to test. It's unclear whether random color
assignment ever had much benefit, and it made unit
testing the algorithm difficult. Now we have 100%
line coverage.
Fixes part of #10902.
We don't use input.create_non_editable_pill() in our
code yet. If we add this back, we'll want to have node
tests on it.
Removing this unused code brings us to 100% line
coverage for input_pill.js.
This directly reverts 5c11ab85 with the small addition
of adding input_pill to our list of fully covered
modules.
Anders Kaseorg
Steve Howell
Vishnu KS
Tim Abbott
Greg Price
Yashashvi Dave
Aman Agrawal
Thomas Ip
Vaibhav
Harshit Bansal
Marco Burstein
vinitS101
Anders Kaseorg