The new function specifies the single minimal diff between 2 strings.
It takes in 2 string parameters and returns an array with 3 integers
where the 1st is the index where the difference starts and the 2nd and
3rd are the indices of the end of the diff in the 2 strings.
"is_pm_recipient" is not supposed to be called with an arbitrary
recipient object which might have "to_user_ids" being undefined.
Since this helper is only used with focused_recipient in
compose_fade_helper, we move it there.
Note that the helper is no longer separately tested. It is now covered
by the test case of "compose_fade_helper.would_receive_message".
(See
5e74a8d0cc/static/js/compose.js (L156-L162))
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This finishes up the work from 057ee6633a.
We had this "get_reload_topic" helper for user that has "topic"
encoded as "subject" from a older release. This is unlikely to cause
problem now because we no longer use "subject" for reloading since 2018.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Uptil now only space was used as a word separating character when
searching streams. This meant that searching for "xyz" would not turn
up a stream named "stream-xyz" as one would expect.
Since -, _ and / are likely to be used as word separators in stream
names, these 3 are added as word separators for streams. The utility
function `filter_by_word_prefix_match` is refactored by adding an
optional `word_separator_regex` argument.
Fixes: #19700.
This increases consistency and saves a bit of code, but more
importantly, it makes it much easier to switch between these APIs
while refactoring tests.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit adds a tippy tooltip for inline image previews in messages.
There exists some (reasonable) logic in `static/js/util.js` which
overrides all title attributes for links to user-uploaded content to
ensure they always display "Download <filename>". This doesn't make
sense for inline images specifically because they will be opened in a
ligthbox, so we prevent that.
There is an additional tippy instance created in `static/js/tippyjs.js`
to add tippy tooltips to inline images, which takes advantage of the now
preserved title attribute of the parent link.
If you call mock_template(fn, true), we will
call the actual template code and pass it to your
stub for verification.
We make this opt-in to prevent false positives
on template line coverage.
We special-case our handling of static/js/templates.js,
since it's important that all of our tests have
the Zulip-specific handlers for Handlebars pre-registered.
This runs in roughly the same amount of time as the
previous commit.
We no longer export make_zjquery().
We now instead have a singleton zjquery instance
that we attach to global.$ in index.js.
We call $.clear_all_elements() before each module.
(We will soon get even more aggressive about doing
it in run_test.)
Test functions can still override $ with set_global.
A good example of this is copy_and_paste using the
real jquery module.
We no longer exempt $ as a global variable, so
test modules that use the zjquery $ need to do:
const $ = require("../zjsunit/zjquery");
Because `util` is so late in the alphabet, this
leak never surfaced in practice, but I tried running
the node tests in reverse, and this leak came
up if you ran `util` before `stream_list`. I guess
it's nice that `stream_list` actually exercises
the difference between a dumb sort and an
Intl-aware sort.
It's possible that we should just assume that
Intl.Collator is always available at this point,
which would eliminate the need for this test.
ES and TypeScript modules are strict by default and don’t need this
directive. ESLint will remind us to add it to new CommonJS files and
remove it from ES and TypeScript modules.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Prettier would do this anyway, but it’s separated out for a more
reviewable diff. Generated by ESLint.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit changes the would_receive_message to use user_id
instead of emails.
This change is done because user_ids are immutable and using
user_ids is the correct way of uniquely identifying user.
The change in 'would_receive_message' also leads to change
in util.is_pm_recipient to use a string of user_ids instead
of emails.
We also know that user_ids passed to 'would_receive_message'
are active user_ids, since we get them from buddy_list.
So we don't need to check whether the user is active, which
was previously being checked by get_active_user_for_email.
While we could fix this issue by changing the markdown processor,
doing so is not a robust solution, because even a momentary bug in the
markdown processor could allow cached messages that do not follow our
security policy.
This change ensures that even if our markdown processor has bugs that
result in rendered content that does not properly follow our policy of
using rel="noopener noreferrer" on links, we'll still do something
reasonable.
Co-authored-by: Tim Abbott <tabbott@zulipchat.com>
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
I am not quite ready to declare victory on
the subject/topic migration, but we are super
close. In this commit I bump a blueslip
warning to a blueslip error, so that we'll
be notified of any codepath that is still
using the janky fall-back-to-subject defensive
code here.
If we go a couple days without any errors, then
we can remove the blueslip warning and the
defensive code immediately and then inline
the callers at our leisure. I wouldn't be
wildly against keeping these wrappers in some
parts of the code, but that debate is out of
the scope of this immediate fix, and I haven't
thought hard about it yet.
We can basically sweep set_message_topic() now,
if we wanted to, since it's truly just a one-liner.
(At one point it was encapsulating something
like `message.subject = foo`).
This required a tiny change to compose_fade
test setup.
I am 99% sure we can rely on trimRight() and
trim() being available in all browsers that
we support. I verified in FF.
This removes the util dependency from both
modules touched here.
We now treat util like a leaf module and
use "require" to import it everywhere it's used.
An earlier version of this commit moved
util into our "shared" library, but we
decided to wait on that. Once we're ready
to do that, we should only need to do a
simple search/replace on various
require/zrequire statements plus a small
tweak to one of the custom linter checks.
It turns out we don't really need util.js
for our most immediate code-sharing goal,
which is to reuse our markdown code on
mobile. There's a little bit of cleanup
still remaining to break the dependency,
but it's minor.
The util module still calls the global
blueslip module in one place, but that
code is about to be removed in the next
few commits.
I am pretty confident that once we start
sharing things like the typeahead code
more aggressively, we'll start having
dependencies on util. The module is barely
more than 300 lines long, so we'll probably
just move the whole thing into shared
rather than break it apart. Also, we
can continue to nibble away at the
cruftier parts of the module.
We now require all of our unit tests to handle
blueslip errors for warn/error/fatal. This
simplifies the zblueslip code to not have any
options passed in.
Most of the places changed here fell into two
categories:
- We were just missing a random piece of
setup data in a happy path test.
- We were testing error handling in just
a lazy way to ensure 100% coverage. Often
these error codepaths were fairly
contrived.
The one place where we especially lazy was
the stream_data tests, and those are now
more thorough.
Edited the warning to clearly state that most members/most stream members
will be notified on using wildcard mentions, along with the specific
mention (e.g. @ALL, @everyone and @stream).
Did a separate check for all wildcard mentions in util.js and stored the
corresponding mention in wildcard_mention inside compose.js.
Fixes: #13636
This commit was originally automatically generated using `tools/lint
--only=eslint --fix`. It was then modified by tabbott to contain only
changes to a set of files that are unlikely to result in significant
merge conflicts with any open pull request, excluding about 20 files.
His plan is to merge the remaining changes with more precise care,
potentially involving merging parts of conflicting pull requests
before running the `eslint --fix` operation.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This seems like a small change (apart from all the
test changes), but it fundamentally changes how
the app finds "topic" on message objects. Now
all code that used to set "subject" now sets "topic"
on message-like objects. We convert incoming messages
to have topic, and we write to "topic" all the way up
to hitting the server (which now accepts "topic" on
incoming endpoints).
We fall back to subject as needed, but the code will
emit a warning that should be heeded--the "subject"
field is prone to becoming stale for things like
topic changes.
N-Shar-ma
Yuri Sulyma
Zixuan James Li
Anders Kaseorg
Austin Riba
Tim Abbott
isakhagg
Priyank Patel
Steve Howell
Riken Shah
sahil839
Steve Howell
Anders Kaseorg
shubhamgupta2956
Vaibhav Raj Singh
Nikhil-Vats
Rohitt Vashishtha