Since it's the initial migration, this can't have any useful effect.
I'm pretty sure the backstory is we did a manual squash of migrations
during the process of open-sourcing Zulip, and incorrectly didn't
remove this code.
It's not possible to directly upgrade from pre-5.3 versions to main,
since they do not have any supported OSes in common. Thus, this
dependency on the confirmation model, which risks creating a circular
dependency if we squash migrations, can be removed.
Adds some validation for changing the realm's max invites via the
support view so that it is not set below the default max for the
realm's plan type, and so that if it's currently set to the default
max it's not reset to that same value.
This commit adds a new `group_size` field to the `DirectMessageGroup`
model, and backfills its value to each of the existing direct message
groups.
Fixes part of #25713
Earlier, we were using 'send_event' in 'do_change_is_billing_admin'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_update_outgoing_webhook_service' which can lead to a
situation, if any db operation is added after the 'send_event'
in future, where we enqueue events but the action function fails
at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_set_push_notifications_enabled_end_timestamp' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_set_realm_stream' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_set_realm_authentication_methods' which can lead to a situation
where we enqueue events but there's an error at a later stage in
the codepath using this function.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_set_realm_user_default_setting
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_regenerate_api_key'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_change_full_name'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
The Slack API when returning the emoji records, returns the record for
its thumbsup_all emoji with the url ending with .png, even though the
file is a gif.
For that reason, we have to make that code correct file extensions based
on the response content-type. Emojis are the smallest set of images to
download, so for simplicity of implementation, we remove the
parallelization of the downloads in favor of just processing them
serially.
Ideally this would besplit up into two commits, but it's hard to split
into self-contained, atomic chunks now that this segment of the
import/export system is generally kind of broken after thumbnailing
system changes.
1. 3rd party export converters don't make .original image files.
Insteadthey provide a single file, which the import should treat as if
it's .original.
2. 3rd party converters create all the records with is_animated=False.
That's an issue, because without setting that correctly on the
RealmEmoji objects, Zulip doesn't know that it should use the "still"
thumbnail when the emoji is being used in a user's status. Which leads
to incorrectly displaying the user status with the distracting
animation.
The export tool was only exporting the already-thumbnailed emoji file,
omitting the original one. Now we make sure to export the .original file
too, like we do for avatars, and make the import tool process it
directly, to thumbnail it directly and generate a still in the case of
animated emojis.
Otherwise, the imported realm wouldn't have the <emoji>.png.original
file that we generally expect to have accessible, and stills for
animated emojis were completely missing.
Convert `message_send.py` use `typed endpoint`.
Disable `message_send` endpoint `to` parameter in the `openapi`
`validate_json_schema` check, because it is a special case where the
content type of the parameter is application/json but the
parameter may or may not be JSON encoded since previously we also
accepted a raw string and some ad-hoc bot might still depend on sending
a raw string.
Remove unused validators from `validator.py`.
This commit updates the db transaction to be durable for
do_update_user_custom_profile_data_if_changed to avoid
addition of any outer atomic block.
While adding any outer atomic block this will raise a runtime error
and we can replace the durable argument with 'savepoint=False'
otherwise we'll have to manually track down the action functions
getting called in that outer atomic block and set the savepoint=False
otherwise it'll lead to creation of savepoints which we don't want.
We can't set savepoint=False before hand to the outermost action
function because it leads to rollback of transaction in tests when
an error is raised in action function.
Earlier, we were using 'send_event' in
check_remove_custom_profile_field_value which can lead to a
situation where we enqueue events but the function fails at a
later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
There was a bug here that would trigger an exception inside
`sync_user_profile_custom_fields`, causing it to get logged with
logging.warning, when an attribute configured for SAML custom profile
field sync was missing from a SAMLResponse or had an empty value.
`sync_user_profile_custom_fields` expects valid values, and None is not
valid.
We could consider a slightly different behavior here instead - when an
attribute is sent with no value in the SAMLResponse, that means the attr
has no value in the IdP's user directory - so perhaps a better behavior
would be to also remove the custom profile field value in Zulip. However
there are two issues with that:
1. It's not necessarily the best behavior, because an organization might
want the "user doesn't have this attribute set at the IdP level" state
to just mean that the user should be free to set the value manually in
Zulip if they wish. And having that value get reset on every login would
then be an issue. The implementation in this commit is consistent with
this philosophy.
2. There's some implementation difficulty - upstream
`self.get_attr(...)`, which we use for reading the attr value from the
SAMLResponse, doesn't distinguish between an attribute being sent with
no value and the attribute not being sent at all - in both cases it
returns None. So we'd need some extra work here with parsing the
SAMLResponse properly, to be able to know when the custom profile field
should get cleared.
Replace the SOCIAL_AUTH_SYNC_CUSTOM_ATTRS_DICT with
SOCIAL_AUTH_SYNC_ATTRS_DICT, designed to support also regular user attrs
like role or full name (in the future).
Custom attributes can stay configured as they were and will get merged
into SOCIAL_AUTH_SYNC_ATTRS_DICT in computed_settings, or can be
specified in SOCIAL_AUTH_SYNC_ATTRS_DICT directly with "custom__"
prefix.
The role sync is plumbed through to user creation, so users can
immediately be created with their intended role as provided by the IdP
when they're creating their account, even when doing this flow without
an invitiation.
This commit make changes in code to include can_manage_group
field to UserGroup objects passed with response of various endpoints
including "/register" endpoint and also in the group object
send with user group creation event.
Earlier there was only a realm level setting for configuring
who can edit user groups. A new group level setting is also added
for configuring who can manage that particular group.
Now, a user group can be edited by a user if it is allowed from
realm level setting or group level setting.
This commit make changes to also use group level setting
in determining whether a group can be edited by user or not.
Also, updated tests to use api_post and api_delete helpers instead
of using client_post and client_delete helpers with different users
being logged in.
This commit adds a new group level setting can_manage_group
for configuring who can manage a group. This commit only adds
the field in database and make changes to automatically create
single user groups corresponsing to acting user
which will be the default value for this setting.
Fixes part of #25928.
Earlier there was a single backend test for testing group edit policy
for creating and deleting user group.This commit make changes in the test
and now there are two separate tests for testing group edit policy for
creating and deleting user groups.
This was done because in future commits we will be adding a
realm level setting for configuring who can create user groups.
Also, updated tests to use api_post and api_delete helpers instead
of using client_post and client_delete helpers with different users
being logged in.
Earlier there was a single decorator function to check whether
user can create and edit user groups. This commit adds a new
decorator function to check whether user has permissions to
create user groups.
This was done because in future commits we will be adding a
realm level setting for configuring who can create user groups.
This commit refactors code in user_groups_in_realm_serialized
such that we do not prefetch "can_mention_group__direct_members"
and "can_mention_group__direct_subgroups" using prefetch_related
and instead fetch members and subgroups for all groups in separate
queries and then use that data to find the members and subgroups
of the group used for that setting.
This change helps us in avoiding two prefetch queries for each
setting when we add more group settings.
Earlier, we were using 'send_event' in
do_change_stream_message_retention_days which can lead to a situation
where we enqueue events but the function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_change_stream_description
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_change_stream_post_policy
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
This commit adds a transaction.atomic decorator to the
'do_change_subscription_property' function to make
the db operations in the action function atomic.
Also, send_event is changed to send_event_on_commit.
Earlier, we were using 'send_event' in 'do_unmute_user'
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_mute_user' which
can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in do_update_message_flags
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'do_mark_muted_user_messages_as_read' which can lead to a
situation where we enqueue events but the function fails at a
later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
In 'do_mark_all_as_read', the transactions which mark the messages
as read in batches should be marked as durable to avoid addition
of any outer atomic block as we support marking a few batches
(not all messages) as read in the case of a timeout.
Earlier, we were using 'send_event' in do_mark_stream_messages_as_read
codepath which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
'do_update_message' is within a db transaction, this commit
updates the 'do_clear_mobile_push_notifications_for_ids' function
used in 'do_update_message' to queue event on commit.
Events should not be sent until we know we're not rolling back,
otherwise it can lead to a situation where we enqueue events but
the function fails at a later stage.
Previously, this logic did the database queries to look up UserProfile
objects in a loop.
Fixes#21820.
Significantly improves Stream creation time and also unsusbcribing users.
Tested stream creation with 10k stream subscribers:
- before: 127 seconds ~2 mins
- after: 17 seconds ~0.3 min
Add a test case for user unsubscribing themself.
This hints to the browser that it should start DNS lookups for the
host, since it is likely to be necessary. It is a softer form than
`rel-preconnect`, which may be unnecessary in these cases, if the
client has the resources cached already.
Show user card popover for scheduled messages overlay, compose box
preview, message edit preview, message edit history.
`.messagebox` was chosen as the selector since that was the nearest
parent class that was common for all of the above.
`@all` does not have a popover and that's why it will have the same
pointer as its parent element. We also introduce a new class called
`.user-mention-all` for managing css rules specific to that mention.
The 'tutorial_status' field on 'UserProfile' model is
no longer used to show onboarding tutorial.
This commit removes the 'tutorial_status' field,
'POST users/me/tutorial_status' endpoint, and
'needs_tutorial' parameter in 'page_params'.
Fixes part of zulip#30043.
We plan to remove the 'tutorial_status' field from UserProfile
table as it is no longer used to show tutorial.
The field is also used to narrow a new user in DM with
welcome bot on the first load.
This prep commit updates the logic to use a new OnboardingStep
for the narrowing behaviour on the first load. This will help
in removing the 'tutorial_status' field.
Other than reformatting documentation for Open Collective, this
commit also moves it to the "Financial" category from "Communications".
This is because Open Collective is mainly a fundrising + legal status +
money management platform, as stated in https://opencollective.com/.
Part of #29592.
Besides reformatting the Netlify doc, this commit also updates the
instructions to match some UI changes in Netlify. The "Outgoing Webhook"
menu is now called "HTTP Post request".
Part of #29592.
Earlier, we were replacing too long attachment name with random uuid
when the character count of the file name was greater than 255.
This results in "OSError: [Errno 36] File name too long" error in
few cases when the file name has less than 255 characters but more
than 255 bytes (file name with Non-ASCII characters).
This commit updates the code to check the file name's byte size
instead of characters count.
A utility command to enable or disable certain authentication backends
for a realm from the command line. Can be helpful e.g. if the
administrator accidentally disables some auth methods in the UI leaving
themselves with none remaining that they could actually use to log back
into the organization.
Example usage:
```
(zulip-py3-venv) vagrant@c32c137f59a0:/srv/zulip$ ./manage.py change_auth_backends -r zulip --show
Current authentication backends for the realm:
Enabled backends:
Dev
Email
GitHub
GitLab
Google
Apple
SAML
OpenID Connect
(zulip-py3-venv) vagrant@c32c137f59a0:/srv/zulip$ ./manage.py change_auth_backends -r zulip --disable GitHub
Disabling GitHub backend for realm Zulip Dev
Updated authentication backends for the realm:
Enabled backends:
Dev
Email
GitLab
Google
Apple
SAML
OpenID Connect
Disabled backends:
GitHub
Done!
(zulip-py3-venv) vagrant@c32c137f59a0:/srv/zulip$ ./manage.py change_auth_backends -r zulip --enable GitHub
Enabling GitHub backend for realm Zulip Dev
Updated authentication backends for the realm:
Enabled backends:
Dev
Email
GitHub
GitLab
Google
Apple
SAML
OpenID Connect
Done!
```
Earlier, we were using 'send_event' in
'notify_realm_custom_profile_fields' which can lead to a situation,
if any db operation is added after the 'send_event' in the action
functions using it, where we enqueue event but the action function
fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
The database operations in 'access_user_group_for_setting' and
'check_add_user_group' used in 'add_user_group' view should be
collectively atomic.
This commit adds transaction.atomic decorator for that purpose.
Earlier, we were using 'send_event' in 'delete_user_grou' codepath
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'edit_user_group' codepath
which can lead to a situation where we enqueue events but the
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_set_zoom_token' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_delete_draft' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_edit_draft' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_create_drafts' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'delete_scheduled_messages'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'edit_scheduled_messages'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in
'try_deliver_one_scheduled_messages' which can lead to a situation
where we enqueue events but the action function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_mark_onboarding_step_as_read'
which can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
This deletes them directly, rather than move them into archival,
because that would be slow, and bloat the archival table in a way
which might interfere with other deletions.
Previously, comment related notifications only displayed the issue
title as a plain string. This commit reformats the issue title to
include a link back to the Jira issue.
Adjusted the Jira documentation for recent changes in their UI
when setting up webhooks, reformatted the note about compatible
Jira version, and added a link to Jira's official webhook guide.
Note that the link in zulip_update_announcements.py is not updated
so that the content in the source code reflects what users actually
received in the update announcement message.
This bug was introduced in da9e4e6e54.
validate validate_plan_for_authentication_methods is already called
inside validate_authentication_methods_dict_from_api, conditionally on
settings.BILLING_ENABLED. This additional, redundant call runs
regardless of BILLING_ENABLED, and thus prevents a self-hosted server
from enabling certain backends in the organization settings UI.
The impact of this is limited - in order to encounter this bug, a
self-hosted server would have to first disable the backend in the UI, as
self-hosted realms are created with all backend flags enabled. A backend
doesn't show up in the org settings UI until it is first enabled in
AUTHENTICATION_BACKENDS in settings.py - that's why this is a rare
state. A sequence of steps like this has to be followed to reproduce:
1. Add the backend to AUTHENTICATION_BACKENDS in settings.py.
2. Disable the backend in the org settings UI.
3. Now try to re-enable it, which fails due to the bug.
This commit removes create_web_public_stream_policy setting
since web-public channel creation permissions are now
handled by group-based setting.
We still pass "realm_create_web_public_stream_policy" in
"/register" response though for older clients with its
value being set depending on the value of group based
setting. If we cannot set its value to an appropriate enum
corresponding to the group setting, then we set it to
"Admins and moderators" considering that server will not
allow the users without permissions to create web-public
channels but the client can make sure that UI is
available to the users who have permission.
Messages are rendered outside of a transaction, for performance
reasons, and then sent inside of one. This opens thumbnailing up to a
race where the thumbnails have not yet been written when the message
is rendered, but the message has not been sent when thumbnailing
completes, causing `rewrite_thumbnailed_images` to be a no-op and the
message being left with a spinner which never resolves.
Explicitly lock and use he ImageAttachment data inside the
message-sending transaction, to rewrite the message content with the
latest information about the existing thumbnails.
Despite the thumbnailing worker taking a lock on Message rows to
update them, this does not lead to deadlocks -- the INSERT of the
Message rows happens in a transaction, ensuring that either the
message rending blocks the thumbnailing until the Message row is
created, or that the `rewrite_thumbnailed_images` and Message INSERT
waits until thumbnailing is complete (and updated no Message rows).
This migration references the "confirmation" app for the first time,
which means we must have migrated at least part of it by this point.
Set the migration to depend on the latest "confirmation" migration at
the time of this migration.
Migrate the following endpoints from @has_request_variables
to @typed_endpoint:
- get_user_group()
- delete_user_group()
- update_user_group_backend()
- update_subgroups_of_user_group()
- get_is_user_group_member()
- get_user_group_members()
- get_subgroups_of_user_group()
With tweaks from tabbott to avoid calling thunks unnecessarily.
Earlier, we were using 'send_event' in 'do_schedule_messages' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_update_user_status' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were immediately enqueueing event in
'do_remove_alert_words' which can lead to a situation, if any
db operation is added after enqueueing event in future, where the
action function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_add_alert_words' which
can lead to a situation, if any db operation is added after the
'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
GitHub sends two almost identical payloads when a pull
request is reviewed, which results in two duplicative
notification messages.
The payloads have different "action" value, with one
having the "submitted" action, whereas the other is
"edited" and has an empty "changes" dict.
We now ignore the payload with the "edited" action type
and an empty "changes" dict.
Fixes#26145.
Co-authored-by: Pieter CK <pieterceka123@gmail.com>
Providing a signed Camo URL for arbitrary URLs opened the server up to
being an open redirector. Return 403 if the URL is not a user upload,
and the backend image if it is. Since we do not have ImageAttachment
rows for uploads at a time we wrote `/thumbnail?` URLs, return the
full-size content.
47683144ff switched the web client to prefer the 840x560 size, as the
mobile apps prefer; remove the now-unused 300x200 size. No client was
using the generated `.jpg` formats, as all clients support `.webp`, so
remove the unused `.jpg` thumbnail as well.
Modern browsers respect the EXIF orientation information of images,
applying rotation and/or mirroring as specified in those tags. The
the `width="..."` and `height="..."` tags are to size the image
_after_ applying those orientation transformations.
The `.width` and `.height` properties of libvips' images are _before_
any transformations are applied. Since we intend to use these to hint
to rendering clients the size that the image should be _rendered at_,
change to storing (and providing to clients) the dimensions of the
rendered image, not the stored bytes.
If the email subject is something like `Fwd:`, it gets stripped to an
empty string, activating the "(no topic)" override. This however leads
to failure if the organization enables the setting forcing every message
to have a topic. Such emails should still go through, so we should just
change the topic value used.
This allows clients to potentially lay out the thumbnails more
intelligently, or to provide a better "progressive-load" experience
when enlarging the thumbnail.
Previously animated images were automatically played in the
message feed of the web app.
Now that we have still thumbnails available for them, we can add a new
personal setting, "web_animate_image_previews", which controls how the
animated images would be played in the web app message feed -- always
played, on hover, or only in the image viewer.
Fixes#31016.
In 'fetch_initial_state_data' we were doing one database query
per announcement stream.
This commit updates the logic to prefetch those streams using
select_related hence avoiding the extra db queries.
Fixes#28909.
The libvips cache is 100MB, 100 operations, or 100 files, whichever is
less. A single Django process or worker is extremely unlikely to ever
see the same image twice, much less within those timeframes.
Disable the cache, since it is mostly useless memory usage for our use
case.
The emoji dir is present in the data from our export tool. This was
added in 468afe4840.
This comment hasn't been updated since
c4b886d8ae, so probably we just forgot to
refresh it when custom emoji export was added.
Tim Abbott
Alex Vandiver
Lauryn Menard
afeefuddin
roanster007
Prakhar Pratyush
Mateusz Mandera
Kenneth Rodrigues
Ujjawal Modi
Sahil Batra
evykassirer
bedo
Shubham Padia
Prakhar Pratyush
PieterCK
Vector73
adnan-td
Anders Kaseorg
lumpleme
Alya Abbott
Niloth P