The numbers are in parens to avoid the markdown processor interpreting them
as numbers -- I couldn't get the automatic numbering to work out with the
paragraph breaks and so on, and this is probably good enough for now.
We need to disable "CREATE EXTENSION pgroonga" in zulip-puppet-apply
by creating /usr/share/postgresql/10/pgroonga_setup.sql.applied.
Because PostgreSQL 10 isn't running in this case. If PostgreSQL 10
isn't running, we can't run "CREATE EXTENSION pgroonga".
We can't use pg_upgrade with PGroonga. PGroonga's install SQL
https://github.com/pgroonga/pgroonga/blob/master/data/pgroonga.sql has
conditions to support multiple PostgreSQL versions. So it's not safe
to use pg_upgrade. pg_upgrade copies metadata for PostgreSQL 9.5 to
PostgreSQL 10. We need to use pg_dump and pg_restore to upgrade
PGroonga correctly for PostgreSQL 10.
It's not required on Ubuntu Xenial (having been replaced by systemd)
and causes problems when installing/upgrading other packages; this
change matches a similar block of code in our installer.
The comment explains this in more detail, but basically one previously
needed the `--from-git` option to `upgrade-zulip-stage-2` if one had
last installed/upgraded from Git, and not that option otherwise, which
would have forced us to make the OS upgrade documentation much more
complicated than it needed to be.
One longstanding gap in our production documentation is how to
properly do an upgrade to the operating system on which Zulip is
installed.
This adds that documentation.
Ideally, we'd get a few folks to test this procedure over the next few
days to make sure it's bulletproof.
Fixes#1705.
Fixes#10796.
Sphinx/ReadTheDocs supports automatically translating links written as
to `.md` files to point to the corresponding `.html` files, so this
migration does not change the resulting HTML output in ReadTheDocs.
But it does fix apparent broken links on GitHub.
This doesn't prevent people from reading the documentation on GitHub
(so doesn't mitigate the fact that some rtd-specific syntax does not
render properly on GH), but it will prevent us from getting erroneous
issues reported about the hyperlinks not working.
Fixes: #11087.
This adds reference for reloading nginx when the certificates are
replaced so that the server works with the new certificates instead of
the old ones.
Fixes: #4849.
This should make life a lot more convenient for organizations that use
the LDAP integration and have their avatars in LDAP already.
This hasn't been end-to-end tested against LDAP yet, so there may be
some minor revisions, but fundamentally, it works, has automated
tests, and should be easy to maintain.
Fixes#286.
This fixes an actual user-facing issue in our mobile push
notifications documentation (where we were incorrectly failing to
quote the argument to `./manage.py register_server` making it not
work), as well as preventing future similar issues from occurring
again via a linter rule.
This is required in some AWS regions.
The right long-term fix is to move to boto3 which doesn't have this
problem.
Allows us to downgrade the priority of #9376.
This commit allows specifying Subject Alternative Names to issue certs
for multiple domains using certbot. The first name passed to certbot-auto
becomes the common name for the certificate; common name and the other
names are then added to the SAN field. All of these arguments are now
positional. Also read the following for the certbot syntax reference:
https://community.letsencrypt.org/t/how-to-specify-subject-name-on-san/Fixes#10674.
In particular, this improves:
* The explanation of how data is mapped into Zulip
* The explanation of what is printed out by `manage.py query_ldap`
* Makes sure users create their first account with EmailAuthBackend.
The term "username" confusingly refers both to the Django concept of
"username" (meaning "the name the user types into the login form") and
a concept the admin presumably already has in their existing
environment; which may or may not be the same thing, and in fact this
is where we document the admin's choice of whether and how they should
correspond. The Django concept in particular isn't obvious, and is
counterintuitive when it means something like an email address.
Explicitly explain the Django "username" concept, under the name of
"Zulip username" to take responsibility for our choice of how it's
exposed in the settings interface. Then use an explicit qualifier,
like "LDAP username", whenever referring to some other notion of
username. And make a pass over this whole side of the instructions,
in particular for consistent handling of these concepts.
Expand on a few things that tend to confuse people (especially the
`%(user)s` thing); move the `LDAPSearchUnion` example out to docs;
adjust the instructions to fit a bit better in their new docs/ home.
This makes it easier to iterate on these, and to expand supplemental
information (like troubleshooting, or unusual configurations) without
further straining the already-dauntingly-long settings.py.
It also makes it easier to consult the instructions while editing the
secrets file, or testing things, etc. -- most admins will find it more
natural to keep a browser open somewhere than a second terminal.
Now that we have nice documentation for our export/import tools, we've
been seeing a lot of users trying to use that as their primary backup
process. Let's correct this.
This flag is used to track which user/message pairs correspond to an
active mobile push notification, that should potentially be cleared
when the user reads the message.
This flag should never appear on a message that is also marked as
read; eventually we may want a cron job to check for that condition.
We include a partial index on UserMessage for this flag.
The is_private flag is intended to be set if recipient type is
'private'(1) or 'huddle'(3), otherwise i.e if it is 'stream'(2), it
should be unset.
This commit adds a database index for the is_private flag (which we'll
need to use it). That index is used to reset the flag if it was
already set. The already set flags were due to a previous removal of
is_me_message flag for which the values were not cleared out.
For now, the is_private flag is always 0 since the really hard part of
this migration is clearing the unspecified previous state; future
commits will fully implement it actually doing something.
History: Migration rewritten significantly by tabbott to ensure it
runs in only 3 minutes on chat.zulip.org. A key detail in making that
work was to ensure that we use the new index for the queries to find
rows to update (which currently requires the `order_by` and `limit`
clauses).
This adds a new settings, SOCIAL_AUTH_SUBDOMAIN, which specifies which
domain should be used for GitHub auth and other python-social-auth
backends.
If one is running a single-realm Zulip server like chat.zulip.org, one
doesn't need to use this setting, but for multi-realm servers using
social auth, this fixes an annoying bug where the session cookie that
python-social-auth sets early in the auth process on the root domain
ends up masking the session cookie that would have been used to
determine a user is logged in. The end result was that logging in
with GitHub on one domain on a multi-realm server like zulipchat.com
would appear to log you out from all the others!
We fix this by moving python-social-auth to a separate subdomain.
Fixes: #9847.
I don't think this is exactly the right place to document this, but
I'm not sure there's a better one without some restructuring this page
in general (which would probably have value).
Fixes#8769.
This moves the documentation for this feature out of
prod_settings_template.py, so that we can edit it more easily.
We also add a bucket policy, which is part of what one would want to
use this in production.
This addresses much, but not all, of #9361.
This fixes exceptions when sending PMs in development (where we were
trying to connect to the localhost push bouncer, which we weren't
authorized for, but even if we were, it wouldn't work, since there's
no APNS/GCM certs).
At the same time, we also set and order of operations that ensures one
has the opportunity to adjust the server URL before submitting
anything to us.
This is kind of easy to gloss over, especially with the framing
as a "format"; surely if things work at all, the file format
must have been right, right? It's really a bit more substantive
than that; say so and also add a bit more description.
In addition to many small edits for formatting and clarity, a few more
significant changes:
* In the main instructions, refer specifically to restarting the
server and to testing that the config works.
* Add SendGrid to the recommended list, as it seems like people
give it a somewhat stronger reputation these days than Mailgun.
* Discuss EMAIL_USE_TLS and EMAIL_PORT along with host, user, and
password in the "free services" section. Though those bullets feel
kind of duplicative to me already.
Let's get right to the point of how to configure SMTP once you know
what you want. That section is pretty short anyway; and we can have
a first step direct the reader to our suggestions if they don't know
what service they want to use.
Also adjust the hierarchy of the headings: group the various
alternative email services under one heading, and group
troubleshooting together under an independent heading.
Also correct what we say about EMAIL_PORT: the Django default is
apparently 25, so if the provider *does* use the usual port 587
then we'll need the port to be set.
This will allow realm admins to remove others from private stream to
which the realm administrator is not subscribed; this is important for
managing those streams, because previously nobody could remove users
from private streams that didn't have any realm administrators
subscribed.
This will allow realm admins to access subscribers of unsubscribed
private stream. This is a preparatory commit for letting realm admins
remove those users.
This will allow realm admins to update the names and descriptions of
private streams even if they are not subscribed, which fixes the buggy
behavior that previously nobody could(!).
The summary already has a qualifier that basically says it shouldn't
matter for most people -- making it simultaneously the most
complicated bullet there, and among the least likely to matter.
And in fact, this requirement shouldn't matter for *anyone* when first
experimenting with Zulip. If certbot won't work in a given admin's
environment, and the available ways to get a cert aren't convenient,
they can always let the installer generate a self-signed cert to get
going, and circle back to the issue later.
So, make that option clear in the main requirements text, and then
just cut the whole bullet from the summary.
This further reduces the wall of text on the install instructions.
Simultaneously it lightens up the pressure on this summary to be quite
so terse; expand a couple of items into multiple bullets (yet with
fewer words!) for greater readability.
Now down to just 4 steps!
This version tries to prioritize: just two items that we really want
all admins to look at even if they aren't already mentally committed
to running a big production service and reading all the docs.
Namely, the two required in order to really try out Zulip effectively
with one's colleagues.
The screenshots weren't doing much good without being embedded in the
text... and in fact, looking at them for I think the first time,
they're badly out of date with the app. So cut them.
We might add screenshots later, but on the other hand if we do a good
job with the forms themselves, they should be superfluous.
This further shortens the wall of text inside the instructions.
Note that thanks to embedded reST, we now have the power to provide
custom anchors at section headings! Which in particular means this
link won't break if we later tweak the wording of this heading.
This helps shorten the wall of text between the start of the
instructions and the end. Conversely, now that there are fewer
followup steps, the troubleshooting section at the end isn't so
far away to point.
This flips the experimental `--express` option to be the default.
We retain the old behavior, where the script exits before
`initialize-database`, as an option `--no-init-db`; it might be useful
in e.g. a migration scenario (from a Zulip install elsewhere, or
another chat system) where the admin wants to set up the database
separately.
The install instructions are adjusted to match, getting shorter by two
steps and a bunch of words. I think this opens up opportunities to
refactor the text to simplify things further, too, but leaving that
for another commit.
Also tweak the "production" test suite to match.
From here on we start to authenticate uploaded file request before
serving this files in production. This involves allowing NGINX to
pass on these file requests to Django for authentication and then
serve these files by making use on internal redirect requests having
x-accel-redirect field. The redirection on requests and loading
of x-accel-redirect param is handled by django-sendfile.
NOTE: This commit starts to authenticate these requests for Zulip
servers running platforms either Ubuntu Xenial (16.04) or above.
Fixes: #320 and #291 partially.
This is what the Sphinx docs recommend when you actually don't want
the page to be included in navigation:
http://www.sphinx-doc.org/en/stable/markup/toctree.html
And now that we have `eval_rst`, we're able to take advantage of it!
One difference between doing this and the old way of making "hidden"
toctree entries is that with the latter, the "previous" and "next"
links at the bottom of each page would thread through the hidden
entries; which gets kind of confusing when they don't appear in the nav.
The careful testing with dozens of realms was a discrete thing
that happened, not a general state that the tool was in;
certainly not the last state it was known to be in, as the rest
of the sentence explains how it hasn't been so carefully tested
since then. So "as of" doesn't fit.
This is easy now, so make it known to admins who are looking for a
fast path for a test install.
Also totally cut the painfully complicated steps for generating a
self-signed cert by hand. Anyone who actually wants that can find a
hundred explanations on the Web, or can look at our script if they
want to specifically mirror how we do it (which is mercifully much
simpler than this.)
It's now January 2018, so we can delete this caveat, right?
Not quite yet -- the original post we link to now has an
update saying 2018-02-27. Let's make it less specific,
in case the date changes again.
Bulleted information instead of prose, huzzah! Also I think we need
to explain the options a bit right here, or at least link to where
they're documented somewhere. (If the list gets much longer, we'll
want to shift toward the latter.)
Also reorganize existing information a bit, and clean up a couple
of nits.
What I really want is to give these sections nice stable slugs
to put on the anchors and use as the URL fragment, independent of
any wording tweaks on the text headings. But I don't think we
have that feature with Markdown and our current docs infrastructure.
At least for Certbot, the brevity helps make this heading clearer
than the previous one.
Hopefully this version makes it somewhat clearer how the different
methods relate to each other, how to choose between them, what
`ZulipRemoteUserBackend` is for, and how the latter works.
Sphinx was displaying "WARNING: document isn't included in any toctree"
for files we just don't want in the TOC. We can hide them from the index,
but the rtd theme defaults to display hidden index entries in the nav bar.
This commit excludes these files from such warnings, and patches layout.html
so that hidden index entries stay hidden from the navigation sidebar.
This commit also moves password-strength.md under docs/production and
adds it as a hidden entry in production/index.rst.
Fixes#7417.
This doesn't touch the main path through the install docs; that will
see a broader rewrite soon as we make outbound email optional for a
nascent server, make the hostname and admin email into mandatory
installer flags, and then radically simplify the instructions by
removing mandatory editing of `settings.py` and folding most of what's
left into the installer.
This adds a few missing entries to the TOC, which hadn't made sense
back when Zulip's ReadTheDocs didn't have the new collapsing feature.
Tweaked by tabbott to also give the SSL certificates doc an
appropriate title for its new role.
This commit helps reduce clutter on the navigation sidebar.
Creates new directories and moves relevant files into them.
Modifies index.rst, symlinks, and image paths accordingly.
This commit also enables expandable/collapsible navigation items,
renames files in docs/development and docs/production,
modifies /tools/test-documentation so that it overrides a theme setting,
Also updates links to other docs, file paths in the codebase that point
to developer documents, and files that should be excluded from lint tests.
Note that this commit does not update direct links to
zulip.readthedocs.io in the codebase; those will be resolved in an
upcoming follow-up commit (it'll be easier to verify all the links
once this is merged and ReadTheDocs is updated).
Fixes#5265.
Tim Abbott
Rishi Gupta
Kouhei Sutou
Shubham Padia
Mohit Maroliya
Samuel Searles-Bryant
ruchit2801
Anders Kaseorg
Vishnu Ks
xiaomingplus
Harshit Bansal
Aastha
seresheim
Joshua Pan
Igor Posledov
Bruce
Rohitt Vashishtha
Greg Price
Aditya Bansal
Jack Zhang
Eeshan Garg
Sampriti Panda
Abhigyan Khaund
Axel Tietje
YJDave
XavierCooney
David Rosa Tamsen
Balaji2198