Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config
History
Steven Snyder 64097cb0d0
config: Updates to TAZ6 single extruder config (#3750) 
The Lulzbot TAZ6 single extruder configuration had an XY position for
z homing that did not match the factory firmware, and was off center
enough to cause the extruder to crash into the home button trim
sometimes when homing. This commit changes the printer config so
that the XY position for Z homing matches the original Marlin firmware
for this printer.

The Lulzbot TAZ6 single extruder configuration had an bed_tilt points
that did not match the factory firmware, and were off enough that the
nozzle (used for probing on this printer) could slip off the edge of
the probe point or miss it entirely. This commit changes the printer
config so that the coordinates for bed_tilt calibration match the
original Marlin firmware for this printer.

For the Lulzbot TAZ6 single extruder config, use 'gear_ratio' and
'rotation_distance' to configure the extruder.

The rotation distance is based on effective circumference of the hobbed
bolt based on the original Marlin firmware for the TAZ6 single-extruder,
and the gear ratio was determined by simply counting the number of
teeth on the pinion and spur gears.

Signed-off-by: Steven T. Snyder <github@steventsnyder.com>
 		2021-01-14 11:01:58 -05:00
..
example-cartesian.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example-corexy.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example-corexz.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example-delta.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example-extras.cfg config: Add dummy example.cfg and example-extras.cfg files 2020-11-28 12:09:03 -05:00
example-polar.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example-rotary-delta.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example-winch.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
example.cfg config: Add dummy example.cfg and example-extras.cfg files 2020-11-28 12:09:03 -05:00
generic-archim2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-azteeg-x5-mini-v3.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-gtr.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-e3-dip.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-e3-turbo.cfg config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file 2021-01-05 12:04:37 -05:00
generic-bigtreetech-skr-mini-e3-v1.0.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-mini-e3-v1.2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-mini-e3-v2.0.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-mini-mz.cfg config: Add example generic-bigtreetech-skr-mini-mz.cfg config 2021-01-09 18:30:04 -05:00
generic-bigtreetech-skr-mini.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-pro.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-v1.1.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-v1.3.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-bigtreetech-skr-v1.4.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-cramps.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-creality-v4.2.7.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-duet2-duex.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-duet2-maestro.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-duet2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-einsy-rambo.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-flyboard.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-fysetc-cheetah-v1.1.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-fysetc-cheetah-v1.2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-fysetc-f6.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-fysetc-s6-v2.cfg config: Add example generic-fysetc-s6-v2.cfg config file 2021-01-04 01:58:39 -05:00
generic-fysetc-s6.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-gt2560.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-melzi.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mightyboard.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mini-rambo.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-minitronics1.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mks-robin-e3.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mks-robin-nano.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-mks-sgenl.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-printrboard-g2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-printrboard.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-radds.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-rambo.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-ramps.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-re-arm.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-replicape.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-rumba.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-simulavr.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-smoothieboard.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
generic-ultimaker-ultimainboard-v2.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
kit-voron2-250mm.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
kit-zav3d-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-adimlab-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-alfawise-u30-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-a4-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-a8-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-e10-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anet-e16-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anycubic-4max-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anycubic-i3-mega-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anycubic-kossel-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-anycubic-kossel-plus-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr10-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr10mini-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr10s-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr20-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-cr20-pro-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender2-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender3-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender3-v2-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender3pro-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender5-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender5plus-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-creality-ender6-2020.cfg Add Creality Ender 6 configuration (#3661) 2020-12-21 10:49:38 -05:00
printer-longer-lk4-pro-2019.cfg config: Add config file for Longer3D LK4 Pro (#3712) 2021-01-10 11:19:34 -05:00
printer-lulzbot-mini1-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-lulzbot-taz6-2017.cfg config: Updates to TAZ6 single extruder config (#3750) 2021-01-14 11:01:58 -05:00
printer-lulzbot-taz6-dual-v3-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-makergear-m2-2012.cfg endstop_phase: Obtain phases directly from stepper microsteps config 2020-12-18 10:30:32 -05:00
printer-makergear-m2-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-micromake-d1-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-monoprice-mini-delta-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-monoprice-select-mini-v2-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-mtw-create-2015.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-seemecnc-rostock-max-v2-2015.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-sovol-sv01-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-sunlu-s8-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tevo-flash-2018.cfg docs: Note the BMG extruder is actually 50:17 and not 3:1 2021-01-10 10:59:43 -05:00
printer-tevo-tarantula-pro-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-p802e-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-p802m-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-x5s-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-x5sa-v6-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-tronxy-x8-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-twotrees-sapphire-plus-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-twotrees-sapphire-pro-2020.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-velleman-k8200-2013.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-6-2016.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-9-2018.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-mini-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-plus-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
printer-wanhao-duplicator-i3-v2.1-2017.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-bigtreetech-exp-mot.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-glyphs.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
sample-idex.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-lcd.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
sample-macros.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
sample-mmu2s-diy.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-multi-extruder.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-multi-mcu.cfg config: Update example configs to use rotation_distance 2020-12-18 10:38:49 -05:00
sample-probe-as-z-endstop.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
sample-raspberry-pi.cfg docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00