config: Add config file for Longer3D LK4 Pro (#3712)

Signed-off-by: Timothée Girard <timgir@timotheegirard.com>
This commit is contained in:
Timothée Girard 2021-01-10 17:19:34 +01:00 committed by GitHub
parent ef40e71fe1
commit 185719f52a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 115 additions and 0 deletions

View File

@ -0,0 +1,115 @@
# This file contains common pin mappings for Longer LK4 Pro.
# To use this config, the firmware should be compiled for the AVR
# atmega2560 (though other AVR chips are also possible).
# See docs/Config_Reference.md for a description of parameters.
[stepper_x]
step_pin: ar54
dir_pin: !ar55
enable_pin: !ar38
microsteps: 16
rotation_distance: 40
endstop_pin: ^!ar3
position_endstop: 0
position_max: 235
homing_speed: 50
[stepper_y]
step_pin: ar60
dir_pin: ar61
enable_pin: !ar56
microsteps: 16
rotation_distance: 40
endstop_pin: ^!ar14
position_endstop: 0
position_max: 235
homing_speed: 50
[stepper_z]
step_pin: ar46
dir_pin: !ar48
enable_pin: !ar62
microsteps: 16
rotation_distance: 8
endstop_pin: ^!ar35
# Uncomment for BLTouch
# endstop_pin: probe:z_virtual_endstop
position_endstop: 0.5
position_max: 250
# Uncomment this section for BLTouch
# [homing_override]
# axes: z
# set_position_z: 0.0
# gcode:
# G90
# G0 Z5 F600
# G28 X0 Y0
# G0 X143 Y137 F3600
# G28 Z0
# G0 Z5 F600
# [bltouch]
# According this follow mapping :
# https://arduiblog.com/2020/06/22/installation-dun-bltouch-sur-lalfawise-u30-pro/
# & see "Branchement" paragraph & picture
# sensor_pin: ^ar35
# control_pin: ar7
# If you use this fang : https://www.thingiverse.com/thing:3603067
# you can use this follow values for x & y offset
# x_offset: -28
# y_offset: -26
# and test this z_offset
# z_offset: 1.56
# [bed_mesh]
# mesh_min: 16,16
# mesh_max: 201,200
# probe_count: 4,3
[extruder]
step_pin: ar26
dir_pin: !ar28
enable_pin: !ar24
microsteps: 16
rotation_distance: 34.5576
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: ar10
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 250
[filament_switch_sensor filament_sensor]
switch_pin: ^!ar2
[heater_bed]
heater_pin: ar8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14
control: watermark
min_temp: 0
max_temp: 130
[fan]
pin: ar9
[mcu]
serial: /dev/ttyUSB0
pin_map: arduino
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
# Klipper doesn't able to working display at this time