Directory Layout

The src/ directory contains the C source for the micro-controller code. The src/avr/ directory contains specific code for Atmel ATmega micro-controllers. The src/sam3x8e/ directory contains code specific to the Arduino Due style ARM micro-controllers. The src/pru/ directory contains code specific to the Beaglebone's on-board PRU micro-controller. The src/simulator/ contains code stubs that allow the micro-controller to be test compiled on other architectures. The src/generic/ directory contains helper code that may be useful across different host architectures. The build arranges for includes of "board/somefile.h" to first look in the current architecture directory (eg, src/avr/somefile.h) and then in the generic directory (eg, src/generic/somefile.h).

The klippy/ directory contains the host software. Most of the host software is written in Python, however the klippy/chelper/ directory contains some C code helpers. The klippy/kinematics/ directory contains the robot kinematics code. The klippy/extras/ directory contains the host code extensible "modules".

The lib/ directory contains external 3rd-party library code that is necessary to build some targets.

The config/ directory contains example printer configuration files.

The scripts/ directory contains build-time scripts useful for compiling the micro-controller code.

The test/ directory contains automated test cases.

During compilation, the build may create an out/ directory. This contains temporary build time objects. The final micro-controller object that is built is out/klipper.elf.hex on AVR and out/klipper.bin on ARM.

Micro-controller code flow

Execution of the micro-controller code starts in architecture specific code (eg, src/avr/main.c) which ultimately calls sched_main() located in src/sched.c. The sched_main() code starts by running all functions that have been tagged with the DECL_INIT() macro. It then goes on to repeatedly run all functions tagged with the DECL_TASK() macro.

One of the main task functions is command_dispatch() located in src/command.c. This function is called from the board specific input/output code (eg, src/avr/serial.c) and it runs the command functions associated with the commands found in the input stream. Command functions are declared using the DECL_COMMAND() macro (see the protocol document for more information).

Task, init, and command functions always run with interrupts enabled (however, they can temporarily disable interrupts if needed). These functions should never pause, delay, or do any work that lasts more than a few micro-seconds. These functions schedule work at specific times by scheduling timers.

Timer functions are scheduled by calling sched_add_timer() (located in src/sched.c). The scheduler code will arrange for the given function to be called at the requested clock time. Timer interrupts are initially handled in an architecture specific interrupt handler (eg, src/avr/timer.c) which calls sched_timer_dispatch() located in src/sched.c. The timer interrupt leads to execution of schedule timer functions. Timer functions always run with interrupts disabled. The timer functions should always complete within a few micro-seconds. At completion of the timer event, the function may choose to reschedule itself.

In the event an error is detected the code can invoke shutdown() (a macro which calls sched_shutdown() located in src/sched.c). Invoking shutdown() causes all functions tagged with the DECL_SHUTDOWN() macro to be run. Shutdown functions always run with interrupts disabled.

Much of the functionality of the micro-controller involves working with General-Purpose Input/Output pins (GPIO). In order to abstract the low-level architecture specific code from the high-level task code, all GPIO events are implemented in architecture specific wrappers (eg, src/avr/gpio.c). The code is compiled with gcc's "-flto -fwhole-program" optimization which does an excellent job of inlining functions across compilation units, so most of these tiny gpio functions are inlined into their callers, and there is no run-time cost to using them.

Klippy code overview

The host code (Klippy) is intended to run on a low-cost computer (such as a Raspberry Pi) paired with the micro-controller. The code is primarily written in Python, however it does use CFFI to implement some functionality in C code.

Initial execution starts in klippy/klippy.py. This reads the command-line arguments, opens the printer config file, instantiates the main printer objects, and starts the serial connection. The main execution of G-code commands is in the process_commands() method in klippy/gcode.py. This code translates the G-code commands into printer object calls, which frequently translate the actions to commands to be executed on the micro-controller (as declared via the DECL_COMMAND macro in the micro-controller code).

There are four threads in the Klippy host code. The main thread handles incoming gcode commands. A second thread (which resides entirely in the klippy/chelper/serialqueue.c C code) handles low-level IO with the serial port. The third thread is used to process response messages from the micro-controller in the Python code (see klippy/serialhdl.py). The fourth thread writes debug messages to the log (see klippy/queuelogger.py) so that the other threads never block on log writes.

Code flow of a move command

A typical printer movement starts when a "G1" command is sent to the Klippy host and it completes when the corresponding step pulses are produced on the micro-controller. This section outlines the code flow of a typical move command. The kinematics document provides further information on the mechanics of moves.

Processing for a move command starts in gcode.py. The goal of gcode.py is to translate G-code into internal calls. Changes in origin (eg, G92), changes in relative vs absolute positions (eg, G90), and unit changes (eg, F6000=100mm/s) are handled here. The code path for a move is: process_data() -> process_commands() -> cmd_G1(). Ultimately the ToolHead class is invoked to execute the actual request: cmd_G1() -> ToolHead.move()
The ToolHead class (in toolhead.py) handles "look-ahead" and tracks the timing of printing actions. The codepath for a move is: ToolHead.move() -> MoveQueue.add_move() -> MoveQueue.flush() -> Move.set_junction() -> Move.move().
- ToolHead.move() creates a Move() object with the parameters of the move (in cartesian space and in units of seconds and millimeters).
- MoveQueue.add_move() places the move object on the "look-ahead" queue.
- MoveQueue.flush() determines the start and end velocities of each move.
- Move.set_junction() implements the "trapezoid generator" on a move. The "trapezoid generator" breaks every move into three parts: a constant acceleration phase, followed by a constant velocity phase, followed by a constant deceleration phase. Every move contains these three phases in this order, but some phases may be of zero duration.
- When Move.move() is called, everything about the move is known - its start location, its end location, its acceleration, its start/cruising/end velocity, and distance traveled during acceleration/cruising/deceleration. All the information is stored in the Move() class and is in cartesian space in units of millimeters and seconds.
The move is then handed off to the kinematics classes: Move.move() -> kin.move()
The goal of the kinematics classes is to translate the movement in cartesian space to movement on each stepper. The kinematics classes are located in the klippy/kinematics/ directory. The kinematic class is given a chance to audit the move (ToolHead.move() -> kin.check_move()) before it goes on the look-ahead queue, but once the move arrives in kin.move() the kinematic class is required to handle the move as specified. Note that the extruder is handled in its own kinematic class. Since the Move() class specifies the exact movement time and since step pulses are sent to the micro-controller with specific timing, stepper movements produced by the extruder class will be in sync with head movement even though the code is kept separate.
Klipper uses an iterative solver to generate the step times for each stepper. For efficiency reasons, the stepper pulse times are generated in C code. The code flow is: kin.move() -> MCU_Stepper.step_itersolve() -> itersolve_gen_steps() (in klippy/chelper/itersolve.c). The goal of the iterative solver is to find step times given a function that calculates a stepper position from a time. This is done by repeatedly "guessing" various times until the stepper position formula returns the desired position of the next step on the stepper. The feedback produced from each guess is used to improve future guesses so that the process rapidly converges to the desired time. The kinematic stepper position formulas are located in the klippy/chelper/ directory (eg, kin_cart.c, kin_corexy.c, kin_delta.c, kin_extruder.c).
After the iterative solver calculates the step times they are added to an array: itersolve_gen_steps() -> queue_append() (in klippy/chelper/stepcompress.c). The array (struct stepcompress.queue) stores the corresponding micro-controller clock counter times for every step. Here the "micro-controller clock counter" value directly corresponds to the micro-controller's hardware counter - it is relative to when the micro-controller was last powered up.
The next major step is to compress the steps: stepcompress_flush() -> compress_bisect_add() (in klippy/chelper/stepcompress.c). This code generates and encodes a series of micro-controller "queue_step" commands that correspond to the list of stepper step times built in the previous stage. These "queue_step" commands are then queued, prioritized, and sent to the micro-controller (via stepcompress.c:steppersync and serialqueue.c:serialqueue).
Processing of the queue_step commands on the micro-controller starts in src/command.c which parses the command and calls command_queue_step(). The command_queue_step() code (in src/stepper.c) just appends the parameters of each queue_step command to a per stepper queue. Under normal operation the queue_step command is parsed and queued at least 100ms before the time of its first step. Finally, the generation of stepper events is done in stepper_event(). It's called from the hardware timer interrupt at the scheduled time of the first step. The stepper_event() code generates a step pulse and then reschedules itself to run at the time of the next step pulse for the given queue_step parameters. The parameters for each queue_step command are "interval", "count", and "add". At a high-level, stepper_event() runs the following, 'count' times: do_step(); next_wake_time = last_wake_time + interval; interval += add;

The above may seem like a lot of complexity to execute a movement. However, the only really interesting parts are in the ToolHead and kinematic classes. It's this part of the code which specifies the movements and their timings. The remaining parts of the processing is mostly just communication and plumbing.

Adding a host module

The Klippy host code has a dynamic module loading capability. If a config section named "[my_module]" is found in the printer config file then the software will automatically attempt to load the python module klippy/extras/my_module.py . This module system is the preferred method for adding new functionality to Klipper.

The easiest way to add a new module is to use an existing module as a reference - see klippy/extras/servo.py as an example.

The following may also be useful:

Execution of the module starts in the module level load_config() function (for config sections of the form [my_module]) or in load_config_prefix() (for config sections of the form [my_module my_name]). This function is passed a "config" object and it must return a new "printer object" associated with the given config section.
During the process of instantiating a new printer object, the config object can be used to read parameters from the given config section. This is done using config.get(), config.getfloat(), config.getint(), etc. methods. Be sure to read all values from the config during the construction of the printer object - if the user specifies a config parameter that is not read during this phase then it will be assumed it is a typo in the config and an error will be raised.
Use the config.get_printer() method to obtain a reference to the main "printer" class. This "printer" class stores references to all the "printer objects" that have been instantiated. Use the printer.lookup_object() method to find references to other printer objects. Almost all functionality (even core kinematic modules) are encapsulated in one of these printer objects. Note, though, that when a new module is instantiated, not all other printer objects will have been instantiated. The "gcode" and "pins" modules will always be available, but for other modules it is a good idea to defer the lookup.
Define a printer_state() method if the code needs to be called during printer setup and/or shutdown. This method is called twice during setup (with "connect" and then "ready") and may also be called at run-time (with "shutdown" or "disconnect"). It is common to perform "printer object" lookup during the "connect" and "ready" phases.
If there is an error in the user's config, be sure to raise it during the load_config() or printer_state("connect") phases. Use either raise config.error("my error") or raise printer.config_error("my error") to report the error.
Use the "pins" module to configure a pin on a micro-controller. This is typically done with something similar to printer.lookup_object("pins").setup_pin("pwm", config.get("my_pin")). The returned object can then be commanded at run-time.
If the module needs access to system timing or external file descriptors then use printer.get_reactor() to obtain access to the global "event reactor" class. This reactor class allows one to schedule timers, wait for input on file descriptors, and to "sleep" the host code.
Do not use global variables. All state should be stored in the printer object returned from the load_config() function. This is important as otherwise the RESTART command may not perform as expected. Also, for similar reasons, if any external files (or sockets) are opened then be sure to close them from the printer_state("disconnect") callback.
Avoid accessing the internal member variables (or calling methods that start with an underscore) of other printer objects. Observing this convention makes it easier to manage future changes.
If submitting the module for inclusion in the main Klipper code, be sure to place a copyright notice at the top of the module. See the existing modules for the preferred format.

Adding new kinematics

This section provides some tips on adding support to Klipper for additional types of printer kinematics. This type of activity requires excellent understanding of the math formulas for the target kinematics. It also requires software development skills - though one should only need to update the host software.

Useful steps:

Start by studying the "code flow of a move" section and the Kinematics document.
Review the existing kinematic classes in the klippy/kinematics/ directory. The kinematic classes are tasked with converting a move in cartesian coordinates to the movement on each stepper. One should be able to copy one of these files as a starting point.
Implement the C stepper kinematic position functions for each stepper if they are not already available (see kin_cart.c, kin_corexy.c, and kin_delta.c in klippy/chelper/). The function should call move_get_coord() to convert a given move time (in seconds) to a cartesian coordinate (in millimeters), and then calculate the desired stepper position (in millimeters) from that cartesian coordinate.
Implement the calc_position() method in the new kinematics class. This method calculates the position of the toolhead in cartesian coordinates from the current position of each stepper. It does not need to be efficient as it is typically only called during homing and probing operations.
Other methods. Implement the move(), check_move(), home(), motor_off(), set_position(), and get_steppers() methods. These functions are typically used to provide kinematic specific checks. However, at the start of development one can use boiler-plate code here.
Implement test cases. Create a g-code file with a series of moves that can test important cases for the given kinematics. Follow the debugging documentation to convert this g-code file to micro-controller commands. This is useful to exercise corner cases and to check for regressions.

Porting to a new micro-controller

This section provides some tips on porting Klipper's micro-controller code to a new architecture. This type of activity requires good knowledge of embedded development and hands-on access to the target micro-controller.

Useful steps:

Start by identifying any 3rd party libraries that will be used during the port. Common examples include "CMSIS" wrappers and manufacturer "HAL" libraries. All 3rd party code needs to be GNU GPLv3 compatible. The 3rd party code should be committed to the Klipper lib/ directory. Update the lib/README file with information on where and when the library was obtained. It is preferable to copy the code into the Klipper repository unchanged, but if any changes are required then those changes should be listed explicitly in the lib/README file.
Create a new architecture sub-directory in the src/ directory and add initial Kconfig and Makefile support. Use the existing architectures as a guide. The src/simulator provides a basic example of a minimum starting point.
The first main coding task is to bring up communication support to the target board. This is the most difficult step in a new port. Once basic communication is working, the remaining steps tend to be much easier. It is typical to use an RS-232 style serial port during initial development as these types of hardware devices are generally easier to enable and control. During this phase, make liberal use of helper code from the src/generic/ directory (check how src/simulator/Makefile includes the generic C code into the build). It is also necessary to define timer_read_time() (which returns the current system clock) in this phase, but it is not necessary to fully support timer irq handling.
Get familiar with the the console.py tool (as described in the debugging document) and verify connectivity to the micro-controller with it. This tool translates the low-level micro-controller communication protocol to a human readable form.
Add support for timer dispatch from hardware interrupts. See Klipper commit 970831ee as an example of steps 1-5 done for the LPC176x architecture.
Bring up basic GPIO input and output support. See Klipper commit c78b9076 as an example of this.
Bring up additional peripherals - for example see Klipper commit 65613aed, c812a40a, and c381d03a.
Create a sample Klipper config file in the config/ directory. Test the micro-controller with the main klippy.py program.
Consider adding build test cases in the test/ directory.

Time

Fundamental to the operation of Klipper is the handling of clocks, times, and timestamps. Klipper executes actions on the printer by scheduling events to occur in the near future. For example, to turn on a fan, the code might schedule a change to a GPIO pin in a 100ms. It is rare for the code to attempt to take an instantaneous action. Thus, the handling of time within Klipper is critical to correct operation.

There are three types of times tracked internally in the Klipper host software:

System time. The system time uses the system's monotonic clock - it is a floating point number stored as seconds and it is (generally) relative to when the host computer was last started. System times have limited use in the software - they are primarily used when interacting with the operating system. Within the host code, system times are frequently stored in variables named eventtime or curtime.
Print time. The print time is synchronized to the main micro-controller clock (the micro-controller defined in the "[mcu]" config section). It is a floating point number stored as seconds and is relative to when the main mcu was last restarted. It is possible to convert from a "print time" to the main micro-controller's hardware clock by multiplying the print time by the mcu's statically configured frequency rate. The high-level host code uses print times to calculates almost all physical actions (eg, head movement, heater changes, etc.). Within the host code, print times are generally stored in variables named print_time or move_time.
MCU clock. This is the hardware clock counter on each micro-controller. It is stored as an integer and its update rate is relative to the frequency of the given micro-controller. The host software translates its internal times to clocks before transmission to the mcu. The mcu code only ever tracks time in clock ticks. Within the host code, clock values are tracked as 64bit integers, while the mcu code uses 32bit integers. Within the host code, clocks are generally stored in variables with names containing clock or ticks.

Conversion between the different time formats is primarily implemented in the klippy/clocksync.py code.

Some things to be aware of when reviewing the code:

32bit and 64bit clocks: To reduce bandwidth and to improve micro-controller efficiency, clocks on the micro-controller are tracked as 32bit integers. When comparing two clocks in the mcu code, the timer_is_before() function must always be used to ensure integer rollovers are handled properly. The host software converts 32bit clocks to 64bit clocks by appending the high-order bits from the last mcu timestamp it has received - no message from the mcu is ever more than 2^31 clock ticks in the future or past so this conversion is never ambiguous. The host converts from 64bit clocks to 32bit clocks by simply truncating the high-order bits. To ensure there is no ambiguity in this conversion, the klippy/chelper/serialqueue.c code will buffer messages until they are within 2^31 clock ticks of their target time.
Multiple micro-controllers: The host software supports using multiple micro-controllers on a single printer. In this case, the "MCU clock" of each micro-controller is tracked separately. The clocksync.py code handles clock drift between micro-controllers by modifying the way it converts from "print time" to "MCU clock". On secondary mcus, the mcu frequency that is used in this conversion is regularly updated to account for measured drift.

24 KiB Raw Blame History