..
chelper
extruder: Initial support for "smoothed pressure advance"
2019-11-21 13:18:19 -05:00
extras
FAN: Kick start fan when the increase is more than 50% ( #2085 )
2019-11-24 18:37:30 -05:00
kinematics
extruder: Remove support for lookahead() method
2019-11-21 13:18:21 -05:00
clocksync.py
clocksync: Fix typo in pause() call at connect time
2019-10-31 11:36:35 -04:00
configfile.py
configfile: Fix the exception raised when an included file is missing ( #1931 )
2019-09-01 18:28:18 -04:00
console.py
console: Update for PinResolver changes
2019-08-19 23:52:02 -04:00
gcode.py
stepper: Add get/set_tag_position() and convert calc_position()
2019-11-13 19:00:17 -05:00
heater.py
extruder: Consistently use "extruder" for the primary extruder
2019-11-07 16:28:47 -05:00
homing.py
toolhead: Rename _full_flush() to flush_step_generation() and use globally
2019-11-21 13:17:45 -05:00
klippy.py
mcu: Contact and identify all the mcus prior to configuring them
2019-11-06 10:35:24 -05:00
mathutil.py
gcode: Change respond_info() to log by default
2019-03-04 13:04:18 -05:00
mcu.py
mcu: Minor simplification to default reset detection
2019-11-12 22:15:04 -05:00
msgproto.py
msgproto: unresolved symbol fixed
2019-11-15 11:36:54 -05:00
parsedump.py
build: Request python2 for all directly executed python binaries
2017-06-27 20:26:02 -04:00
pins.py
stepper: Move MCU_stepper from mcu.py to stepper.py
2019-11-12 17:32:18 -05:00
queuelogger.py
klippy: Automatically clear rollover_info on each restart
2018-04-03 13:18:52 -04:00
reactor.py
reactor: Add support for "completions"
2019-07-10 10:43:20 -04:00
serialhdl.py
serialhdl: Update SendWithRetry to use reactor completions
2019-07-10 10:43:20 -04:00
stepper.py
stepper: Remove set_commanded_position() call
2019-11-13 19:35:26 -05:00
toolhead.py
force_move: Make sure to flush step generation queue after each move
2019-11-24 11:55:30 -05:00
util.py
util: Ignore errors in clear_hupcl (allows OSX to run)
2019-05-20 16:49:42 -04:00
93f1e6dd86